Novel AB crosslinked polymer networks based on 1‐vinylimidazole‐ terminated polyurethane and poly(methyl methacrylate)

1‐Vinylimidazole‐terminated telechelic polyurethanes were prepared from 1‐vinylimidazole and bromine‐terminated polyurethane. This vinyl‐terminated telechelic polyurethane (VTPU) and methyl methacrylate were polymerized in the presence of benzoyl peroxide to prepare novel AB crosslinked polymer networks (ABCPs). These were characterized by spectral, thermal and mechanical studies. The absence of the characteristic peak of vinyl group in infrared spectra of ABCP films confirms the occurrence of crosslinking. Static mechanical testing showed that the tensile strength of ABCP increases with increasing poly(methyl methacrylate) content. Dynamic mechanical studies revealed that ABCPs, at equal compositions of VTPU and methyl methacrylate, show good damping properties. Copyright © 2006 Society of Chemical Industry     

AB crosslinked polymers based on cationomeric polyurethane and poly(methyl methacrylate): Static and dynamic mechanical studies

Vinyl‐terminated polyurethane (VTPU) was prepared by end‐functionalizing isocyanate‐terminated prepolymers with 2‐bromoethanol and subsequently quartenizing with 4‐vinylpyridine. The vinyl functionality was then effectively utilized for preparing AB crosslinked polymers (ABCPs) with methyl methacrylate (MMA). ABCPs prepared with variable weight ratios on PTMG₁₀₀₀‐based VTPU/MMA (8/2, 6/4, 5/5, 4/6, 2/8) and those prepared at a 5/5 weight ratio with different polyols (PTMG₁₀₀₀, PPG₁₀₀₀, and PCL₁₂₅₀) in VTPU were characterized by Fourier transform infrared spectroscopy (FTIR) and further analyzed for thermal and mechanical properties. FTIR spectral results confirm quartenization of heterocyclic nitrogen, leading to crosslinking. Thermogravimetric analyses show enhanced thermal stability of the crosslinked systems. The stress–strain measurements reveal increasing tensile strength with increasing amounts of MMA. Comparison of dynamic mechanical spectra of ABCPs based on PTMG₁₀₀₀ shows that the 5/5 composition exhibits good damping over a broad temperature range. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 813–821, 2001     

聚氨酯/聚甲基丙烯酸甲酯互穿网络的阻尼性能及相态

引言聚合物互穿网络体系由于在其形成过程中产生特殊的物理拓扑结构,使得该体系是一种永久缠结在一起的聚合物"合金"[1]。同时,由于构成该体系的聚合物组分往往不相容或部分相容,在其形成     

Second order non-linear optical interpenetrating polymer networks based on polyurethane or poly(methyl methacrylate) and epoxy polymer

Two interpenetrating polymer networks (IPNs), (one pseudo-IPN consisting of a linear polyurethane/epoxy-based polymer network and one full-IPN consisting of a poly(methyl methacrylate)/epoxy-based polymer network) have been synthesized and characterized. Both IPNs showed only one T_g; hence a homogeneous phase morphology is suggested. The second-order non-linear optical coefficients (d₃₃) of the pseudo-IPN and the full-IPN were measured and found to be 2.78 × 10⁻⁷ esu and 1.86 × 10⁷ esu, respectively. The study of temporal stability at room temperature and elevated temperature (120 °C) indicates that the full-IPN is more efficient at improving the orientational stability of the non-linear optical chromophores than the pseudo-IPN, because of the permanent entanglements of the two component networks in the full-IPN. © 1999 Society of Chemical Industry     

Semi‐ and full‐interpenetrating polymer networks based on polyurethane produced from canola oil and poly(methyl methacrylate)

Semi‐ and full‐interpenetrating polymer networks (IPNs) were prepared using polyurethane (PUR) produced from a canola oil‐based polyol with primary terminal functional groups and poly(methyl methacrylate) (PMMA). The properties of the material were studied and compared using dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and tensile measurements. The morphology of the IPNs was investigated using atomic force microscopy (AFM). Semi‐IPNs demonstrated different thermal mechanical properties, mechanical properties, phase behavior, and morphology from full IPNs. Both types of IPNs studied are two‐phase systems with incomplete phase separation. However, the extent of phase separation is significantly more advanced in the semi‐IPNs compared with the full IPNs. All the semi‐IPNs exhibited higher values of elongation at break for all proportions of acrylate to polyurethane compared with the corresponding full IPNs. These differences are mainly due to the fact that in the case of semi‐IPNs, one of the constituting polymers remains linear, so that it exhibits a loosely packed network and relatively high mobility, whereas in the case of full IPNs, there is a higher degree of crosslinking, which restricts the mobility of the chains. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks based on polyurethane and poly(hydroxyethyl methacrylate)

The thermodynamic miscibility and thermal and dynamic mechanical behaviour of semi‐interpenetrating polymer networks (semi‐IPNs) of crosslinked polyurethane (PU) and linear poly(hydroxyethyl methacrylate) (PHEMA) have been investigated. The free energies of mixing of the semi‐IPN components have been determined by the vapour sorption method and it was established that the parameters are positive and depend on the amount of PHEMA in the semi‐IPN samples. Thermal analyses glass transition temperatures evidenced two in the semi‐IPNs in accordance with the investigation of the thermodynamic miscibility of these systems. Dynamic mechanical analysis revealed a pronounced change in the viscoelastic properties of the PU‐based semi‐IPNs with different amounts of PHEMA in the samples. The semi‐IPNs have two distinct tan δ maxima related to the relaxations of the two polymers in their glass temperature domains. The temperature position of PU relaxation maximum tan δ is invariable but its amplitude decreases in the semi‐IPNs with increasing amount of PHEMA in the systems. The tan δ maximum of PHEMA is shifted to a lower temperature and its amplitude decreases with increasing amount of PU in the semi‐IPNs. The segregation degree of components α was calculated using the viscoelastic properties of semi‐IPNs. It was concluded that the studied semi‐IPNs are two‐phase systems with incomplete phase separation. The different levels of immiscibility lead to the different degree of phase separation in the semi‐IPNs with compositions. Copyright © 2004 Society of Chemical Industry     

Thermal properties of poly(vinyl alcohol)/poly(diallyldi‐methylammonium chloride) interpenetrating polymer networks

Interpenetrating polymer networks (IPNs) constructed with poly(vinyl alcohol) (PVA) and poly(diallyldimethyl ammonium chloride) (PDADMAC) using a sequential IPN method were prepared. The thermal characterization of the IPNs was investigated by differential scanning calorimetry (DSC), dielectric analysis (DEA), and thermogravimtric analysis (TGA). Decreases in the melting temperature of PVA segments in IPNs were observed with increasing PDADMAC content using DSC. DEA was employed to ascertain glass transition temperature of IPNs. The thermal decomposition of IPNs was investigated using TGA, and thermal decomposition of IPNs could be decelerated by changing PVA content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1346–1349, 2003     

PMMA/P(BA-co-AA)界面交联LIPN阻尼材料的研究

用种子乳液聚合法合成了PMMA／P（BA－co-AA)界面交联乳胶互穿聚合物网络材料。动态力学谱结果表明，界面交联能提高乳胶互穿聚合物网络的高温阻尼性能；拉伸实验结果表明，界面交联提高了乳胶互穿聚合物网络的抗拉强度和断裂伸长率。     

High-resolution thermogravimetric analysis of polyurethane/poly(ethyl methacrylate) interpenetrating polymer networks

Thermal degradation of a series of polyurethane/poly(ethyl methacrylate) interpenetrating polymer networks and their constituent networks were studied by three modes of thermogravimetric analysis: the conventional method, the constant reaction rate method, and the dynamic rate technique. The best understanding of the degradation mechanism was achieved by the last method, which allows much better resolution of overlapping events. In addition, the weight losses correspond well with the results obtained from the constant reaction rate analysis, but are achieved in shorter times. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 287–295, 1998     

Ionomer interpenetrating polymer networks from polyurethane anionomers and polyurethane isocyanurate

Two-component interpenetrating polymer network (IPN) systems composed from polyurethane isocyanurate and polyurethane anionomer were prepared by simultaneous polymerization and crosslinking in solution. Specific attractive forces that occurred among various networks helped to make them compatible and led to the formation of true homogeneous topologically interpenetrating polymer networks. These ionomer IPNs were characterized by means of stress-strain properties, hardness, thermogravimetric analysis, density and conductivity. The morphology of the IPNs was studied by thermomechanical analysis and dynamic mechanical analysis.     

Viscoelastic behaviour of self‐assembling polyurethane and poly(vinyl alcohol)

The rheological behaviour of polyurethane (PU) and poly(vinyl alcohol) (PVA) was investigated in aqueous solution and the hydrogel state. The dependence of viscosity on polymer concentration is discussed. The formation of supramolecular structures induced by temperature increase or shear conditions was evidenced. In PU solutions, as temperature increases, a self‐assembling process occurs due to hydrogen bonding and hydrophobic interactions determining a thermoreversible hydrogel formation. In creep and recovery tests, the weak PU network presents high elasticity only at low shear stress (below 10 Pa); it recovers only 15%–20% of strain above 40 Pa and the hydrogel structure fails at high shear stress (above 150 Pa). Also, PU hydrogel is not able to recover its structure after being submitted to successive low and high deformations. In PVA solutions, a shear induced aggregation was observed at 37 °C. PVA hydrogels obtained by the freezing–thawing method present high elasticity and stability due to the strong polymer–polymer interactions established between the polymer chains. Physical networks based on PU/PVA mixtures synergistically combine the characteristics of the two polymers, showing high elasticity when a shear stress up to 3000 Pa is applied during the creep test followed by a fast recovery of the hydrogel structure after exhibiting successive levels of deformation (self‐healing ability). Therefore, these hydrogels are suitable materials for tissue engineering applications. © 2019 Society of Chemical Industry     

Thermal characteristics of interpenetrating polymer networks composed of poly(vinyl alcohol) and poly(N‐isopropylacrylamide)

Interpenetrating polymer networks (IPNs) composed of poly(vinyl alcohol) (PVA) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared by the sequential‐IPN method. The thermal characterization of the IPNs was investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dielectric analysis (DEA). Depression of the melting temperature (T_m) of the PVA segment in IPNs was observed with increasing PNIPAAm content using DSC. DEA was employed to ascertain the glass‐transition temperature (T_g) of IPNs. From the result of DEA, IPNs exhibited two T_g values, indicating the presence of phase separation in the IPNs. The thermal decomposition of IPNs was investigated using TGA and appeared at near 200°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 881–885, 2003     

Comparison of the phase behaviour of the liquid-crystalline polymer/poly(methyl methacrylate) and poly(vinyl acetate)/poly(methyl methacrylate) blends

The phase behaviour of blends of a liquid-crystalline polymer (LCP) and poly(methyl methacrylate) (PMMA), as well as the phase state of blends of PMMA and poly(vinyl acetate) (PVA) has been investigated using light scattering and phase-contrast optical microscopy. The blends of LCP and PMMA have been obtained by coagulation from ternary solutions. The cloud point curves were determined. It was established that both pairs demix upon heating, ie have an LCST. In the region of intermediate composition, the phase separation proceeds according to a spinodal mechanism; however for LCP/PMMA blends, the decomposition proceeds according to a non-linear regime from the very onset. In the region of small amounts of LCP, the phase separation follows a mechanism of nucleation and growth. For PMMA/PVA blends, the spinodal decomposition proceeds according to a linear regime, in spite of the molecular mobility that PVA chains develop at lower temperatures. Only after prolonged heat treatment does the process transit to a non-linear regime. The data show a similarity between the phase behaviour of blends of liquid-crystalline and of flexible amorphous polymers. The distinction consists of the absence of a linear regime of decomposition for LCP-PMMA blends. © 1999 Society of Chemical Industry     

Radiation synthesis and environmental responsiveness of semi‐interpenetrating polymer networks composed of poly(dimethyl–aminoethyl methacrylate) and poly(ethylene oxide)

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of poly(dimethyl–aminoethyl methacrylate) (PDMAEMA) and poly(ethylene oxide) (PEO) were synthesized by γ‐radiation; three semi‐IPNs with 80 : 20, 90 : 10, and 95 : 5 weight ratios of DMAEMA/PEO were obtained by use of this technique. The gel–dose curves showed that the hydrogels were characterized by a structure typical of semi‐IPNs and the results of elemental analysis supported this point. The temperature‐induced phase transition of semi‐IPNs with the composition of 95 : 5 was still retained, with the lower critical solution temperature of PDMAEMA shifting from 40 to 27°C. The temperature sensitivity of the other two semi‐IPNs gradually disappeared. The pH sensitivity of three semi‐IPNs was still retained but the pH shifted slightly to lower values with increasing PEO content in the semi‐IPNs. The effect of PEO content in semi‐IPNs on their environmental responsiveness was discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2995–3001, 2004     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Novel poly(methyl methacrylate)‐block‐polyurethane‐block‐poly(methyl methacrylate) tri‐block copolymers through atom transfer radical polymerization

Poly(methyl methacrylate)‐block‐polyurethane‐block‐poly(methyl methacrylate) tri‐block copolymers have been synthesized successfully through atom transfer radical polymerization of methyl methacrylate using telechelic bromo‐terminated polyurethane/CuBr/N,N,N,N″,N″‐pentamethyldiethylenetriamine initiating system. As the time increases, the number‐average molecular weight increases linearly from 6400 to 37,000. This shows that the poly methyl methacrylate blocks were attached to polyurethane block. As the polymerization time increases, both conversion and molecular weight increased and the molecular weight increases linearly with increasing conversion. These results indicate that the formation of the tri‐block copolymers was through atom transfer radical polymerization mechanism. Proton nuclear magnetic resonance spectral results of the triblock copolymers show that the molar ratio between polyurethane and poly (methyl methacrylate) blocks is in the range of 1 : 16.3 to 1 : 449.4. Differential scanning calorimetry results show T_g of the soft segment at ?35°C and T_g of the hard segment at 75°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of hydroxyl‐terminated poly(fluoroalkyl methacrylate) main‐chain length on the microphase separation of waterborne fluorinated polyurethane

Waterborne fluorinated polyurethanes (WFPUs) based on hydroxyl‐terminated poly(fluoroalkyl methacrylate)s (HTPFMAs) with different main‐chain lengths were synthesized. The structure of HTPFMA was characterized using ¹H NMR spectroscopy, measurements of hydroxyl values and gel permeation chromatography. The microstructures of WFPUs were investigated using Fourier transform infrared spectroscopy, which indicated that hydrogen bonding interactions in hard segments of WFPUs were enhanced by the introduction of HTPFMA and increased with increasing main‐chain length of HTPFMA. The results of X‐ray diffraction demonstrated that increasing the main‐chain length of HTPFMA resulted in an increase of crystallinity in hard segments. Differential scanning calorimetry revealed that the melting temperature of micro‐crystallites in hard segments and the microphase separation increased with an increase of HTPFMA main‐chain length. Dynamic mechanical analysis and scanning electron microscopy also confirmed that HTPFMA with longer main‐chain length can promote the extent of microphase separation of WFPUs between soft and hard domains. The mechanical properties of WFPUs were improved due to the increase of microphase separation with increasing HTPFMA main‐chain length. © 2018 Society of Chemical Industry     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Solution and solid‐state NMR investigation of poly(methyl methacrylate)/poly(vinyl pyrrolidone) blends

The development of polymer blends has become very important for the polymer industry because these blends have shown to be a successful and versatile alternative way to obtain a new polymer. In this study, binary blends formed by poly(methyl methacrylate) (PMMA) and poly(vinyl pyrrolidone) were prepared by solution casting and evaluated by solution and solid‐state NMR. Variations in the microstructure of PMMA were analyzed by ¹³C solution NMR. Solid‐state NMR promotes responses on physical interaction, homogeneity, and compatibility to use these blends to understand the behavior of the ternary blends. The NMR results led‐us to acquire information on the polymer blend microstructure and molecular dynamic behavior. From the NMR solution, it was possible to evaluate the microstructure of both polymer blend components; they were atactic. From the solid state, good compatibility between both polymer components was characterized. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 372–377, 2004     

Interpenetrating polymer networks based on polyol modified castor oil polyurethane and poly(2‐ethoxyethyl methacrylate): Synthesis,chemical, mechanical,thermal properties,and morphology

Interpenetrating polymer networks (IPNs) of glycerol modified castor oil polyurethane (GC‐PU) and poly(2‐ethoxyethyl methacrylate) poly(2‐EOEMA) were synthesized using benzoyl peroxide as initiator and ethylene glycol dimethacrylate (EGDM) as crosslinker. GC‐PU/poly (2‐EOEMA) interpenetrating polymer networks were obtained by transfer molding. The novel GC‐PU/poly (2‐EOEMA) IPNs are found to be tough films. These IPNs are characterized in terms of their resistance to chemical reagents thermal behavior (DSC, TGA) and mechanical behavior, including tensile strength, Young's modulus, shore A hardness, and elongation. The morphological behavior was studied by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1029–1034, 2004