A broadband wide‐incident‐angle reflective polarization converter

Abstract— A high‐performance reflective polarization converter which could be used in a backlight recycling system for liquid‐crystal‐display (LCD) devices is proposed. The device consists of a twisted‐nematic (TN) liquid‐crystal film, a uniaxial A‐plate, and a reflector. The configuration parameters, such as thickness and orientation of the films, are optimized using a genetic algorithm. As a result, the design can convert light from TM to TE polarization (or TE to TM) at a maximum 99.7%, minimum 91.3%, and average 96.7% conversion efficiency for the entire visible spectrum and incident angle from 0 to 60°. Such a broadband reflective polarization converter is particularly useful for enhancing the light efficiency and reducing the power consumption of LCDs.     

How to reduce light leakage and clipping in local‐dimming liquid‐crystal displays

Abstract— In conventional LCDs, the backlight is set to maximum luminance regardless of the image. For dark scenes, this approach causes light leakage and power waste. Especially, light leakage in dark scenes degrades the contrast ratio of LCDs; to circumvent this problem, local‐dimming systems have been proposed. In these systems, the LED backlight is divided into several local blocks and the backlight luminance of each local block is controlled individually, and pixel values are adjusted simultaneously according to the luminance profile of the dimmed backlight. In this paper, a method of determining the LED backlight luminance of each local block depending on the image is proposed; this method significantly improves the image quality of LCDs. First, we introduce methods of quantifying light‐leakage at dark gray levels and clipping at bright gray levels. Then, the proposed method to determine the dimming duty, which controls the LED backlight luminance by compromising between these two measures, was derived. The proposed algorithm preserves the original image with little clipping distortion and effectively reduces light leakage.     

Progress in viewing‐angle properties of liquid‐crystal displays

Abstract— Viewing‐angle dependences of the contrast ratio and color shift of LCDs have been radically improved as evidenced by the increasing application of LCDs in high‐quality television. This paper describes the concept of optical compensation and the fundamental characteristics of the viewing‐angle property for various LC modes.     

Viewing‐angle enhancement in holographic reflective displays by nanoscale holographic patterning

Abstract— This work presents a method to increase the viewing angle of holographic polymer‐dispersed liquid‐crystal (H‐PDLC) reflective displays. One of the drawbacks to H‐PDLC technology is the existence of a narrow viewing angle. We present a way to alleviate this problem by structuring the phase front of the recording beams to increase the viewing cone of the display. Analysis of the diffractive properties of these holograms shows that the macroscopic and the nanoscale morphologies both play a role in the optical properties of the films.     

Speckle‐noise suppression due to a single ferroelectric liquid‐crystal cell

Abstract— A novel principle and simple technique of suppressing the speckle noise in images displayed by a laser projection system is proposed. Wave coherence in a laser beam and speckles are destroyed in real time when the beam passes through a single FLC cell where spatially inhomogeneous phase light modulation takes place due to special FLC material and an electrical pulse regime.     

Novel application of ink‐jet‐printing technology in multi‐domain alignment liquid‐crystal displays

Abstract— Based on the drop‐on‐demand characteristics of ink‐jet printing, the multi‐domain alignment liquid‐crystal display (LCD) could be achieved by using patterned polyimide materials. These polyimide ink locations with different alignment procedures could be defined in a single pixel, depending on the designer 's setting. In this paper, we combined the electro‐optical design, polyimide ink formulation, and ink‐jetting technology to demonstrate the application of multi‐domain alignment liquid‐crystal display manufactory. The first one was a multi‐domain vertical‐alignment LCD. After the horizontal alignment material pattern on the vertical alignment film, the viewing angle would reach 150° without compensation film. The second one was a single‐cell‐gap transflective LCD within integrating the horizontal alignment in the transmissive region and hybrid alignment in the reflective one in the same pixel. In addition, this transflective LCD was also demonstrated in the form of a 2.4‐in. 170‐ppi prototype.     

Technologies toward flexible liquid‐crystal displays

Abstract— Several leading technologies for flexible liquid‐crystal displays have been developed recently at ERSO. The roll‐to‐roll compatible techniques, polymer‐added liquid crystal, have been applied on a film‐like substrate. A flexible black‐and‐white cholesteric liquid‐crystal display was also implemented by photo‐induced phase separation. Color filters placed on a plastic substrate by a low‐temperature manufacturing process was successfully fabricated. A novel design of a wide‐viewing‐angle color plastic LCD was also proposed.