Ultra‐FFS TFT‐LCD with super image quality,fast response time,and strong pressure‐resistant characteristics

Fringe‐field‐switching (FFS) devices using liquid‐crystal (LC) with a negative dielectric anisotropy exhibit high transmittance and wide viewing angle simultaneously. Recently, we have developed an “Ultra‐FFS” thin‐film‐transistor (TFT) LCD using LC with a positive dielectric anisotropy that exhibits high transmittance, is color‐shift free, has a high‐contrast ratio in a wide range, experiences no crosstalk and has a fast response time of 25 msec. In this paper, the device concept is discussed, and, in addition, the pressure‐resistant characteristics of the devices compared with that of the twisted‐nematic (TN) LCD is discussed.     

Requirements for large‐sized high‐resolution TFT‐LCDs

Abstract— A 22‐in. prototype TFT‐LCD with a resolution of 200 pixels per inch and wide‐viewing‐angle capability has been developed and its requirements in terms of screen quality and technology will be discussed. An in‐plane‐switching mode with dual‐domain structure, post‐spacers, and high‐resolution process were implemented to achieve superior front‐of‐screen quality. And, also, in order to improve reliability and productivity, we developed a new injection method for liquid crystals which enabled us to eliminate injection holes.     

A new pixel design and a novel driving scheme for multi‐domain vertically aligned LCDs

Abstract— By using a new pixel design and a novel driving scheme that adds a bias electrode and a bias TFT to the ordinary pixel structure, a high‐contrast‐ratio and wide‐viewing‐angle LCD mode, refered to as the biased vertical‐alignment (BVA) mode, has been sucessfully developed. Compared to the published data on the PVA and MVA modes, the BVA mode has a distinct advantage of lower manufacturing cost due to the elimination of a lithographic process step that forms either ITO cuts or protrusions on the color‐filter substrates. The BVA mode requires ITO cuts on the TFT substrate similar to that for the PVA and MVA modes. The 15‐in. BVA‐mode XGA prototype exhibits a high contrast ratio of 1200:1 and high cell transmittance of 4.3%.     

Super‐large‐sized TFT‐LCD (55 in.) for HDTV application

Abstract— We have developed the world's largest TFT‐LCD, which has a 55‐in.‐diagonal size. This LCD features a 1920 × 1080 (16:9) resolution for full‐HDTV images, 500‐nit luminance, 72% color gamut, and 12‐msec response time at all gray levels. The size of the panel (55 in.) was determined by the maximum efficiency of our fifth‐generation line (glass size: 1100 × 1250 mm). To overcome the limitation of size in photolithography equipment, a new stitcking‐free technology was applied in both the TFT and color‐filter side. And the super‐IPS mode was used as a wide‐viewing‐angle technology because it is suitable in the fabrication of large panels. In this paper, we present issues on both the fabrication and characteristics of the 55‐in. TFT‐LCD.     

Single‐cell‐gap transflective liquid‐crystal display using double‐ and single‐mode approaches

Abstract— In this paper, many popular methods to study transflective liquid‐crystal‐displays (LCDs) have been discussed, and several new transflective LCD configurations with a single‐cell gap have been proposed. The traditional double‐cell‐gap method gives the best match of the transmittance/reflectance voltage curve (TVC/RVC) and also the widest viewing angle, but also brings the highest fabrication complexity. The single‐cell‐gap transflective LCD is much easier to fabricate and also shows a good match of TVC/RVC. A new methodology has been shown to find optimal configurations for single‐cell‐gap transflective LCDs. New configurations using multimode in a single pixel include twisted nematic (TN) optically compensated bend (OCB), TN electrically controlled birefringence (ECB), and TN low‐twisted nematic (LTN). TN and hybrid‐aligned nematic (HAN) modes have been investigated for single‐mode transflective LCDs. The results exhibit high contrast ratio, a good match of TVC/RVC, as well as wide viewing angle.     

Switchable transmissive and reflective liquid‐crystal display using a multi‐domain vertical alignment

Abstract— A wide‐view transflective liquid‐crystal display (LCD) capable of switching between transmissive and reflective modes in response to different ambient‐light conditions is proposed. This transflective LCD adopts a single‐cell‐gap multi‐domain vertical‐alignment (MVA) cell that exhibits high contrast ratio, wide‐viewing angle, and good light transmittance (T) and reflectance (R). Under proper cell optimization, a good match between the VT and VR curves can also be obtained for single‐gamma‐curve driving.     

Optical design and roll‐to‐roll fabrication process of microstructure film for wide viewing LCDs

We have developed a new microstructure film for wide viewing liquid crystal displays (LCDs). By attaching it to the surface of a conventional LCD, the viewing angle characteristics of LCD has drastically improved without causing a blur of the frontal image and a decrease in the contrast ratio under bright ambient light conditions. This film can be applied to various LC modes including twisted nematic and multidomain vertical alignment by changing its internal micrometer‐size 3D structure. Further, this film can be mass‐produced efficiently by self alignment roll‐to‐roll process.     

New era for TFT‐LCD size and viewing‐angle performance

Abstract— Samsung has announced the development of a full‐high‐definition (1920 × 1080) 82‐in. TFT‐LCD panel using Super‐PVA (S‐PVA) technology, the world's largest TFT‐LCD. In addition to the size breakthrough, this product achieves 600 nits of brightness, a contrast ratio of over 1200:1, an angle of view of 180°, a color gamut of 92%, and an 8‐msec response time. Several key enabling technologies were developed to achieve these specifications, including two‐transistor direct‐driven independently controlled S‐PVA subpixels, non‐even‐area‐ratio subpixels for optimal off‐axis gamma, gate overlap driving for larger driving margin, new CCFL technology for higher color gamut, and advanced fabrication techniques including the use of Samsung's new Gen 7 line. Many of these technologies will be applied to other products within Samsung's LCD‐TV product line. Samsung's broader development efforts toward the overall LCD‐TV market, including production status of the Gen 7 facility, will be updated.     

Novel WV film for wide‐viewing‐angle TN‐mode LCDs

Abstract— A new optical compensation film refered to as WV‐EA film for TN‐mode TFT‐LCDs has been developed, resulting in higher contrast ratio, wider‐viewing‐angle characteristics, and improved color shift than their predecessors, especially in the horizontal direction. These features of the new WV film were achieved as a result of haze reduction and optimizing the optical characteristics of the polymerized discotic material layer and TAC film. These features are suitable for large‐sized and wide‐aspect‐ratio LCD monitors and TVs.     

Electrical models of TFT‐LCD panels for circuit simulations

Abstract— As thin‐film‐transistor liquid‐crystal‐display (TFT‐LCD) panels become larger and provide higher resolution, the propagation delay of the row and column lines, the voltage modulation of Vcom, and the response time of the liquid crystal affect the display images now more than in the past. It is more important to understand the electrical characteristics of TFT‐LCD panels these days. There are several commercial products that simulate the electrical and optical performance of TFT‐LCDs. Most of the simulators are made for panel designers. However, this research is for circuit, system, and panel designers. It is made in a SPICE and Cadence environment as a commercial circuit‐design tool. For circuit and system designers, it will help to design the circuit around a new driving method. Also, it can be easily modified for every situation. It also gives panel designers design concepts. This paper describes the electrical model of a 15‐in. XGA (1024 × 768) TFT‐LCD panel. The parasitic resistance and capacitance of the panel are obtained by 3‐D simulation of a subpixel. The accuracy of these data is verified by the measured values of an actual panel. The developed panel simulation platform, the equivalent circuit of a 1 5‐in. XGA panel, is simulated by HSPICE. The results of simulation are compared with those of experiment, according to changing the width of the OE signal. The proposed simulation platform for modeling TFT‐LCD panels can be especially applied to large‐sized LCD TVs. It can help panel and circuit designers to verify their ideas without making actual panels and circuits.     

Transflective twisted‐nematic liquid‐crystal display with double twisted‐nematic cell and twisted liquid‐crystal retarder

Abstract— Two configurations, (i) a double‐cell‐gap twisted nematic (DTN) liquid‐crystal display (LCD) and (ii) a single‐cell‐gap twisted‐nematic (TN) liquid‐crystal display (LCD) using a twisted LC retarder, were optimized for transflective liquid‐crystal displays. For the DTN configuration, both the single‐cell‐gap approach and the double‐cell‐gap approach were considered. The optimized configurations exhibit a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. They are easy to fabricate and also possess a perfect dark state. Both are suitable for high‐quality transflective TFT‐LCDs.     

Comb‐on‐plane switching electrodes for liquid‐crystal displays

Abstract— Although the common twisted‐nematic liquid‐crystal displays (TN‐LCD) has excellent contrast and low color dispersion, it suffers from small viewing angle when driven into the homeotropic state. Among the many techniques proposed, in‐plane switching (IPS) has been quite effective in improving viewing angle. However, there may be difficulty in adopting conventional IPS to higher‐definition displays because it suffers from limited storage capacitance and reduced transmittance. A new comb‐on‐plane switching (COPS) electrode design is proposed. Compared to conventional IPS, COPS allows for lower switching voltage and offers advantages including naturally scalable storage capacitance, wide viewing angle with TN‐like high transmittance, and low color dispersion.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

A continuous‐viewing‐angle‐controllable liquid‐crystal display using a blue‐phase liquid crystal

Abstract— A continuous‐viewing‐angle‐controllable liquid‐crystal display (LCD) using a blue‐phase liquid crystal is proposed. To realize both wide‐viewing‐angle (WVA) mode and narrow‐viewing‐angle (NVA) mode with a single liquid‐crystal panel, each pixel is divided into a main pixel and a subpixel. The main pixel is for displaying images in both modes. The subpixel is for displaying images in WVA mode and controlling the viewing angle in NVA mode. The device exhibits a good viewing‐angle‐controlling characteristic and high transmittance.     

A high‐aperture‐ratio and low‐crosstalk pixel structure design for in‐plane‐switching‐mode TFT‐LCDs

Abstract— The TFT‐LCD market is growing rapidly, and the replacement of CRT TV by LCD TV requires the implementation of LC modes with wide viewing angles and high brightness. The IPS mode is an excellent technology to realize wide viewing angles, but it has a low aperture ratio that has now been improved by Advanced Super‐IPS (AS‐IPS). In this paper, we propose a novel pixel structure design that not only increases the aperture ratio but also reduces the crosstalk. We have improved the current AS‐IPS aperture ratio by 1.25 times and effectively reduced the capacitive coupling ratio from 1.2% to 0.05%.     

Current manufacturing technologies for TFT‐LCDs

Abstract— TFT‐LCD panels for notebook‐PC applications requires a thin and light form factor, low power consumption, and good display quality, whereas the desktop monitor has different requirements such as large panel size, wide viewing angle, high resolution, brightness, etc. However, for the fifth‐generation of mass production, current panel technologies have to improve in order to cope with these requirements. In this article, various approaches to the manufacturing technologies of next‐generation TFT‐LCDs are discussed.     

Development of 100‐in. TFT‐LCDs for HDTV and public‐information‐display applications

Abstract— LCDs have achieved a full‐high‐definition resolution of 1920 × 1080 (16:9), 600‐nit brightness, 3000:1 dynamic contrast ratio, 92% color gamut, 178° viewing angle, and 5‐msec response time at all gray levels and are targeted for HDTV and public‐information‐display applications. Some unique technologies, such as Cu bus line, advanced wide view polarizer, and wide‐color‐gamut lamp, were applied. A new stitching‐free technology was developed to overcome the size limitation of the photomask in both the TFT and color‐filter processes. The size of the panel (100 in.), based on the wide format (16:9), is determined by the maximum efficiency of the world's first seventh‐generation line (glass size, 1950 × 2250 mm) in LG.Philips LCD's (LPL) Paju display cluster. The issues facing 100‐in. TFT‐LCDs will be discussed.     

Depth‐ and viewing‐angle‐enhanced 3‐D/2‐D switchable display system with high contrast ratio using multiple display devices and a lens array

Abstract— An improved 3‐D/2‐D switchable display system with enhanced depth and viewing angle by adding two LCD panels to an integral imaging system has been realized. The proposed system uses the see‐through property of an LCD panel and displays multiple sets of elemental images on the LCD panels to integrate them on multiple locations simultaneously. As a result, the depth of the 3‐D image can be enhanced. For wide viewing angles, the time‐multiplexing method was adopted by displaying mask patterns on the front LCD panel. In addition, another technique to increase the contrast ratio of the proposed system has also been developed. Some experimental results will be provided.     

Fast‐response study of polymer‐stabilized VA‐LCD

Abstract— Polymer stabilization is introduced in VA‐type LCDs, and fast response time can be achieved along with a high contrast ratio.¹ A small amount of reactive monomer is mixed with liquid crystal and forms a polymer layer above the alignment layer by using a UV process. The pre‐tilt angle of the liquid crystal is stabilized, and a faster response time can be realized when the bias pre‐tilt angle from 90° is increased. The properties of reactive monomers and liquid crystal and the conditions of the UV process were studied. Based on the application of the proper monomer and LC, and an optima UV process, a 65‐in. 240‐Hz full‐HD TFT‐LCD, with a faster response time and high contrast ratio, has been developed.     

Low‐power‐consumption TFT‐LCD with dynamic memory embedded in the pixels

A low‐power‐consumption thin‐film‐transistor liquid‐crystal display (TFT‐LCD) with dynamic memory cells embedded in each pixel using low‐temperature poly‐Si technology has been developed. By holding data in the memory, the operating rate of the data driver can be dramatically reduced to 4 Hz. Eight levels of gray scale with low power consumption can be achieved by using the area‐ratio gray‐scale method. This TFT‐LCD can be used for displaying fine still images, with low power consumption.