Effect of Excipient and Processing Variables on Adhesive Properties and Release Profile of Pentoxifylline From Mucoadhesive Tablets

ABSTRACT

The bioavailability and onset of action of drugs with high first-pass metabolism can be significantly improved by administration via the sublingual route. The objective of this study was to evaluate the effect of polymer type and tablet compaction parameters on the adhesive properties and drug release profile from mucoadhesive sublingual tablet formulations. Pentoxifylline was selected as the model drug because it has poor oral bioavailability due to extensive first-pass metabolism. Two polymers known to possess mucoadhesive properties, carbomer and hydroxypropyl methyl cellulose (HPMC), were used to prepare the formulations. Tablets were prepared by using direct compression technique and evaluated for in vitro dissolution, drug-excipient interactions, and adhesive properties. In general, there was a decrease in the rate of drug release with an increase in the concentration of polymers. No drug-excipient interactions were evident from differential scanning calorimetry or high-performance liquid chromatography analysis. For the formulations containing HPMC, the force of mucoadhesion increased with an increase in the concentration of polymer; however, for carbomer formulations, no such correlation was observed. Force of mucoadhesion decreased as a function of hydration time in both of the polymers.     

Potential applications of carbomer in oral mucoadhesive controlled drug delivery system: a review

Carbomers are extensively being used in controlled drug delivery systems (CDDS). They are also finding numerous applications in oral mucoadhesive drug delivery because of their ability to interact with the mucus glycoprotein and to remain localized to a specific site. The present review aims at giving an insight into the potential application of carbomers in mucoadhesive CDDS. This review deals with the physicochemical properties of carbomers and various mechanisms of mucoadhesion. The mechanism for the release of the drug, both water soluble and water insoluble, is discussed. The use of carbomers in oral delivery of peptides or protein-based drugs is also covered.     

Formulation and evaluation of mucoadhesive tablets containing eugenol for the treatment of periodontal diseases

Eugenol is the principle chemical constituent of clove oil and has been used to cure dental problems for ages. Eugenol is an integral part of the dentist's kit due to its analgesic, local anesthetic, anti-;inflammatory, and antibacterial effects. It is used in the form of a paste or mixture as dental cement, filler, and restorative material. This study reports the development and evaluation of controlled-release mucoadhesive tablets for gingival application, containing eugenol, which are prepared by taking carbopol 934 P and Hydroxypropyl methylcellulose (HPMC) K4M in the ratio of 1:2, 1:1, and 2:1. Incorporation of eugenol (10 mg) in a mucoadhesive formulation provides controlled release for a period of 8 hours, which is advantageous over conventional use. In vitro mucoadhesion measured as detachment force in grams and the formulations show good correlation in vivo. The release study indicates that increase in carbopol increases the release rate of eugenol from the formulation whereas HPMC retards it. Increased in vitro bioadhesion is related to HPMC content of the formulation. The release kinetics of eugenol in vitro correlates with the in vivo results. This indicates the increased potential of eugenol as antibacterial, local analgesic, and anaesthetic treatment.     

Release of pentoxifylline from xanthan gum matrix tablets

Pentoxifylline-controlled release tablets were prepared using xanthan gum. The effects of polymer concentration, rotation speed, ionic strength, and pH of the dissolution medium on the release of the water-soluble pentoxifylline were studied. The release rate decreased with increasing polymer concentration in the tablet, which was reflected in the increase in the mean dissolution time. A higher rotation speed and increased ionic strength of the dissolution medium resulted in a higher rate of drug release of xanthan-based tablets. A higher release rate of pentoxifylline was also observed using acidic dissolution medium.     

Investigation of hypromellose particle size effects on drug release from sustained release hydrophilic matrix tablets

Selected combinations of six model drugs and four hypromellose (USP 2208) viscosity grades were studied utilizing direct compression and in vitro dissolution testing. Experimental HPMC samples with differing particle size distributions (coarse, fine, narrow, bimodal) were generated by sieving. For some formulations, the impact of HPMC particle size changes was characterized by faster drug release and an apparent shift in drug release mechanism when less than 50% of the HPMC passed through a 230 mesh (63 μm) screen. Within the ranges studied, drug release from other formulations appeared to be unaffected by HPMC particle size changes.     

Influence of soluble and insoluble cyclodextrin polymers on drug release from hydroxypropyl methylcellulose tablets

Background: The influence of β-cyclodextrin (β-CD) polymers on drug release from hydroxypropyl methylcellulose (HPMC) matrices has not been reported in the literature. Aim: The influence of monomeric β-CD and both soluble and insoluble β‐CD polymers on drug release from tablets containing either 30% or 50% hydroxypropyl methylcellulose has been studied using diflunisal (DF) as model drug. Method: The DF-β-CD inclusion complex (1:1 M) was prepared by coevaporation and characterised using X-ray diffraction, differential thermal analysis, and IR spectroscopy. The dissolution assays were performed according to the USP paddle method. Results: The incorporation of β-CD in the complexed form increases drug release from hydroxypropyl methylcellulose tablets in comparison with the physical mixture because of the better solubilization of the drug. The soluble polymer promotes drug release to a higher extent than the physical mixture with monomeric β-CD, but the insoluble polymer, which is itself a hydrogel, gives rise to the most retarded release profile, probably by retention of the drug in its structure. The formulations containing physical mixtures with either β‐CD or the soluble polymer present an optimum adjustment to zero-order release kinetics, and the inclusion complex followed non-Fickian diffusion according to the Korsmeyer–Peppas model. Conclusion: The release profile of DF from a HPMC matrix can be modulated in different ways by the use of either monomeric or polymeric β-CD.     

Design and characterization of enteric-coated controlled release mucoadhesive microcapsules of Rabeprazole sodium

The objectives of present work was to design and characterize the rabeprazole sodium loaded microcapsules prepared by solvent evaporation technique using ethyl cellulose (EC) based various mucoadhesive polymer, followed by a triple coating with Eudragit L100. The Box-behnken design (BBD) was applied for optimization of formulations containing EC, HPMCK100M and Eudragit L100 as factors for selected responses like entrapment efficiency, mucoadhesive property and drug release in 24 h. The prepared microcapsules were characterized for particle size, drug content, swelling index, mucoadhesive strength, and in vivo antiulcer activity. FT-IR studies revealed that there was no drug-polymer interaction. SEM studies revealed that microcapsules were non-aggregated, spherical shape and smooth appearance. In vitro drug release data from microcapsules was fitted to different kinetic models to explain release profiles. The correlation coefficient value (r²) indicated that the drug release followed Higuchi model. Analysis of variance (ANOVA) showed significant difference in the release of drug from all formulations at p < 0.05 level. Accelerated stability study of optimized formulation (F4) upto 6 months showed there was no change in drug content and release characteristics during storage. In vivo antiulcer activity showed that the optimized microcapsules were able to protect rat stomach against ulcer formation vis-à-vis aqueous solution of the drug showed only negligible and minimum effect.     

Effect of formulation and process variables on the release behavior of amoxicillin matrix tablets

The sustained release of amoxicillin is desired to be confined to the upper gastrointestinal tract to treat certain kind of infections. In vitro dissolution, at pH 1.2, of amoxicillin sustained release tablets has been studied varying the proportion of Carbopol 971P NF and sodium alginate as well as the ethanol/water proportion in the granulation fluid. M_t, the amount of drug released at time (t) and defined in terms of the total drug released over a long time period (M_inf), was described by M_t/M_inf = ktⁿ. Matrices with increasing proportions of sodium alginate showed increasing values of the exponent indicative of the release mechanism (n) and increasing release constant values (k). This is attributed to a drop in the coherence of the polymeric matrix with increasing alginate proportions that produces an increasing polymer relaxation and erosion. Decreasing Carbopol 971P NF proportions reduce the amount of dissolved polymer during granulation, producing a lesser obstruction of amoxicillin dissolution. Alginate proportions of 80% produce near zero order release profiles. Granules obtained with increasing ethanol proportions showed increasing release constant values and a minor change in the exponent (n) values. This is considered a result of lower polymer dissolution during granulation that allows a lesser matrix coherence and a greater amoxicillin dissolution. Alginate matrices granulated with different ethanol/water proportions showed no significant changes in the amoxicillin release profile. There is a trend toward increasing floating times with increasing Carbopol 971P NF proportions.     

Energy release rate and mode-mixity of adhesive joint specimens

Fracture behaviour of adhesive joints under mixed mode loading is analysed by using the beam/adhesive-layer (b/a) model, in which, the adherends are beamlike and the adhesive is constrained to a thin flexible layer between the adherends. The adhesive layer deforms in peel (mode I), in shear (mode II) or in a combination of peel and shear (mixed mode). Macroscopically, the ends of the bonded part of the joints can be considered as crack tips. The energy release rate of a single-layer adhesive joint is then formulated as a function of the crack tip deformation and the mode-mixity is defined by the shear portion of the total energy release rate. The effects of transversal forces and the flexibility of the adhesive layer are included in the b/a-model, which can be applied to joints with short crack length as well as short bonding length. The commonly used end-loaded unsymmetric semi-infinite joints are examined and closed-form solutions are given. In comparison to the singular-field model in the context of linear elastic fracture mechanics, the b/a-model replaces the singularity at the crack tip with a stress concentration zone. It is shown that the b/a-model and the singular-field model yield fundamentally different mode-mixities for unsymmetric systems. The presented closed-form b/a-model solutions facilitates parametric studies of the influence of unbalance in loading, unsymmetry of the adherends, as well as the flexibility of the adhesive layer, on the mode mixity of an adhesive joint.     

Design and evaluation in vitro of controlled release mucoadhesive tablets containing chlorhexidine

This investigation deals with the development of buccal tablets containing chlorhexidine (CHX), a bis-bis-guanide with antimicrobial and antiseptic effects in the oral cavity, and able to adhere to the buccal mucosa to give local controlled release of drug. A mucoadhesive formulation was designed to swell and form a gel adhering to the mucosa and controlling the drug release into the oral cavity.

Some batches of tablets were developed by direct compression, containing different amounts of hydroxypropylmethylcellulose (HPMC) and carbomer; changing the amount ratio of these excipients in formulations, it is possible easily modulate the mucoadhesive effect and release of drug. The in vitro tests were performed using the USP 26/NF paddle apparatus, a specifically developed apparatus, and a modified Franz diffusion cells apparatus. This last method allows a simultaneous study of drug release rate from the tablets and drug permeation through the buccal mucosa.

Similar tests have also been carried out on a commercial product, Corsodyl gel^®, in order to compare the drug release control of gel with respect to that of the mucoadhesive tablet, as a formulation for buccal delivery of CHX. While the commercial formulation does not appear to control the release, the formulation containing 15% w/w methocel behaves the best, ensuring the most rapid and complete release of the drug, together with a negligible absorption of the active agent as required for a local antiseptic action in the oral cavity.     

Evaluation of hydrophilic,hydrophobic and waxy matrix excipients for sustained release tablets of Venlafaxine hydrochloride

Objective: Venlafaxine is freely soluble In water and administered orally as hydrochloride salt In two to three divided doses. In the present investigation different release retarding matrices have been evaluated for sustained release of venlafaxine hydrochloride (VH) from the formulated tablets.

Materials and methods: Sustained release matrix tablets were formulated using different hydrophilic, hydrophobic and waxy materials as matrix formers. Tableting was done by pre-compression, direct compression and hot melt granulation depending on the type of matrix material used and evaluated for different tests. The formulated tablets were compared with commercial venlafaxine products. In vitro drug dissolution profiles were fitted In different mathematical models to elucidate the release mechanism.

Results: Dissolution data showed that commercial formulations Venlor XR^® and Venfax PR^® released the entire drug withIn 8?h where as the formulated tablets with hydroxypropylmethylcellulose (HPMC) and cetyl alcohol as matrix formers provided sustained release of drug for 14–15?h. The release was found to follow Hixson Crowel and Higuchi kinetics for HPMC and cetyl alcohol tablets, respectively.

Conclusion: The developed matrix tablet formulations with HPMC and cetyl alcohol provided sustained release profiles for prolonged periods than commercial formulations.     

Role of cellulose ether polymers on ibuprofen release from matrix tablets

Cellulose derivatives are the most frequently used polymers in formulations of pharmaceutical products for controlled drug delivery. The main aim of the present work was to evaluate the effect of different cellulose substitutions on the release rate of ibuprofen (IBP) from hydrophilic matrix tablets. Thus, the release mechanism of IBP with methylcellulose (MC25), hydroxypropylcellulose (HPC), and hydroxypropylmethylcellulose (HPMC K15M or K100M) was studied. In addition, the influence of the diluents lactose monohydrate (LAC) and β-cyclodextrin (β-CD) was evaluated. Distinct test formulations were prepared containing: 57.14% of IBP, 20.00% of polymer, 20.29% of diluent, 1.71% of talc lubricants, and 0.86% of magnesium stearate as lubricants. Although non-negligible drug-excipient interactions were detected from DSC studies, these were found not to constitute an incompatibility effect. Tablets were examined for their drug content, weight uniformity, hardness, thickness, tensile strength, friability, porosity, swelling, and dissolution performance. Polymers MC25 and HPC were found to be unsuitable for the preparation of this kind of solid dosage form, while HPMC K15M and K100M showed to be advantageous. Dissolution parameters such as the area under the dissolution curve (AUC), the dissolution efficiency (DE_{20 h}), dissolution time (t 50%), and mean dissolution time (MDT) were calculated for all the formulations, and the highest MDT values were obtained with HPMC indicating that a higher value of MDT signifies a higher drug retarding ability of the polymer and vice-versa. The analysis of the drug release data was performed in the light of distinct kinetic mathematical models—Kosmeyer-Peppas, Higuchi, zero-, and first-order. The release process was also found to be slightly influenced by the kind of diluent used.     

Directly compressed mini matrix tablets containing ibuprofen: preparation and evaluation of sustained release

Directly compressed mini tablets were produced containing either hydroxypropylmethylcellulose (HPMC) or ethylcellulose (EC) as release controlling agent. The dynamics of water uptake and erosion degree of polymer were investigated. By changing the polymer concentration, the ibuprofen release was modified. In identical quantities, EC produced a greater sustaining release effect than HPMC. Different grades of viscosity of HPMC did not modify ibuprofen release. For EC formulations, the contribution of diffusion was predominant in the ibuprofen release process. For HPMC preparations, the drug release approached zero-order during a period of 8 h. For comparative purposes, tablets with 10 mm diameter were produced.     

Accelerated ketoprofen release from spray-dried polymeric particles: importance of phase transitions and excipient distribution

HPMC-, PVPVA- and PVP-based microparticles loaded with 30% ketoprofen were prepared by spray drying suspensions or solutions in various water:ethanol blends. The inlet temperature, drying gas and feed flow rates were varied. The resulting differences in the ketoprofen release rates in 0.1?M HCl could be explained based on X-ray diffraction, mDSC, SEM and particle size analysis. Importantly, long term stable drug release could be provided, being much faster than: (i) drug release from a commercial reference product, (ii) the respective physical drug:polymer mixtures, as well as (iii) the dissolution of ketoprofen powder as received. In addition, highly supersaturated release media were obtained, which did not show any sign for re-crystallization during the observation period. Surprisingly, spraying suspensions resulted in larger microparticles exhibiting faster drug release compared to spraying solutions, which resulted in smaller particles exhibiting slower drug release. These effects could be explained based on the physico-chemical characteristics of the systems.     

Effect of formulation composition on the properties of controlled release tablets prepared by roller compaction

This study discusses the effect of formulation composition on the physical characteristics and drug release behavior of controlled-release formulations made by roller compaction. The authors used mixture experimental design to study the effect of formulation components using diclofenac sodium as the model drug substance and varying relative amounts of microcrystalline cellulose (Avicel), hydroxypropyl methylcellulose (HPMC), and glyceryl behenate (Compritol). Dissolution studies revealed very little variability in drug release. The t₇₀ values for the 13 formulations were found to vary between 260 and 550 min. A reduced cubic model was found to best fit the t₇₀ data and gave an adjusted r-square of 0.9406. Each of the linear terms, the interaction terms between Compritol and Avicel and between all three of the tested factors were found to be significant. The longest release times were observed for formulations having higher concentrations of HPMC or Compritol. Tablets with higher concentrations of Avicel showed reduced ability to retard the release of the drug from the tablet matrix. Crushing strength showed systematic dependence on the formulation factors and could be modeled using a reduced quadratic model. The crushing strength values were highest at high concentrations of Avicel, while tablets with a high level of Compritol showed the lowest values. A predicted optimum formulation was derived by a numerical, multiresponse optimization technique. The validity of the model for predicting physical attributes of the product was also verified by experiment. The observed responses from the calculated optimum formulation were in very close agreement with values predicted by the model. The utility of a mixture experimental design for selecting formulation components of a roller compacted product was demonstrated. These simple statistical tools can allow a formulator to rationally select levels of various components in a formulation, improve the quality of products, and develop more robust processes.     

Effect of surface pretreatment on adhesive properties of aluminum alloys

The lap-shear strength and durability of adhesive bonded AI alloy joints with different pretreatments were studied by the lap-shear test and wedge test. The results indicate that the maximum lap-shear strength and durability of the bonding joints pretreated by different processes are influenced by the grade of abrasive papers and can be obviously improved by phosphoric acid anodizing. Alkali etching can obviously improve the durability of bonding joints although it slightly influences the maximum lap-shear strength. The process which is composed of grit-finishing, acetone degreasing, alkali etching and phosphoric acid anodizing, provides a better adhesive bonding property of Al alloy.     

The role of fillers and sodium metabisulfite on drug release from aged polyox tablets

Polyethylene oxides (PEOs) are extensively used to control the release rate of drugs from matrices. Unfortunately, polyox polymers are prone to oxidation under high temperature and relative humidity. The aim of this study was to investigate the effect of sodium metabisulfite as an antioxidant to overcome the drug release changes from polyox matrices (PEO 301 and 303) when stored at 40?°C. The effect of different types of fillers (lactose, mannitol and dicalcium phosphate dihydrate) on stability of diltiazem HCl release profiles was also investigated. Generally, the presence of sodium metabisulfite stabilized the release of drug from PEO matrices stored at 40?°C for 8 weeks. Whilst the absence of metabisulfite caused an increase in drug release from polyox matrices when stored at 40?°C. The results indicate that all three concentrations (0.25, 0.5 and 1% w/w) of sodium metabisulfite were able to overcome structural changes of polyox samples hence stabilizing the drug release. The results also showed that the incorporation of fillers in polyox matrices reduced the sensitivity of drug release when stored at elevated temperature. This indicates that when these excipients were used there was no need to incorporate additional antioxidant. DSC results showed that there was no difference in the melting points of fresh polyox samples and aged polyox samples containing sodium metabisulfite, whereas the melting point of aged polyox samples without sodium metabisulfite were lower than fresh polyox samples. This indicates that the presence of metabisulfite is essential to stabilize polyox samples.     

Systematic development of pH-independent controlled release tablets of carvedilol using central composite design and artificial neural networks

The purpose of this study was to apply the optimization method incorporating artificial neural network (ANN) using pH-independent release of weakly basic drug, carvedilol from HPMC-based matrix formulation. Because of weakly basic nature of carvedilol, drug shows pH-dependent solubility. The enteric polymer EUDRAGIT L100 was added formulations to overcome pH-dependent solubility of carvedilol. Effects of the Hydroxypropylmethyl cellulose (HPMC) K4M and EUDRAGIT L100 amount on drug release were investigated. For this purpose 13 kinds of formulations were prepared at three different levels of each variables. The optimization of the formulation was evaluated by using ANN method. Two formulation parameters, the amounts of HPMC K4M and Eudragit L100 at three levels (?1, 0, 1) were selected as independent/input variables. In-vitro dissolution sampling times at twelve different time points were selected as dependent/output variables. By using experimental dissolution results and amount of HPMC K4M and EUDRAGIT L100, percentage of dissolved carvedilol was predicted by ANN. Similarity factor (f₂) between predicted and experimentally observed profile was calculated and f₂ value was found 76.33. This value showed that there was no difference between predicted and experimentally observed drug release profile. As a result of these experiments, it was found that ANNs can be successfully used to optimize controlled release drug delivery systems.     

The influence of diluent on the release of theophylline from hydrophilic matrix tablets

The role of β-cyclodextrin (β-CD) on the apparent solubility of theophylline was investigated by the solubility method. Binary systems of theophylline and β-CD were prepared using the dry co-grinding method. Their characterization was performed by differential scanning calorimetry (DSC). The dissolution rate of theophylline and theophylline/β-CD and dissolution studies of matrix tablets prepared from mixtures containing theophylline and ground theophylline were carried out. It can be concluded that β-CD is related to an increase in the apparent solubility and dissolution rate of the drug, promoting improvement on the release of theophylline from matrices manufactured with hydroxypropylmethylcellulose (HPMC). This can be attributed to the amorphous state and the increased wettability of the drug.     

Influences of osmotic agents in diffusion layer on drug release from multilayer coated pellets

Nonpareil beads were coated with three different functional layers, namely inner chlorpheniramine maleate-loaded hydroxypropylmethylcellulose (HPMC, 4 mPa · s) deposition layer, middle HPMC (400 mPa · s) diffusion layer, and outer polyacrylic polymer (Eudragit RS30D) retention layer. The osmotic agents, including sodium chloride, glycine, citric acid, and disodium hydrogen phosphate, were incorporated in different amounts into the diffusion layer and the influences on drug release were studied. The osmotic agent competed with HPMC for imbibed water and subsequently caused more water influx owing to the osmotic pressure gradient. An appropriate amount of osmotic agent in the diffusion layer was necessary to exert its effect on retarding drug release. The osmotic effect on drug release was compromised with pellets at a higher coating level of the diffusion layer due to the extensive swelling and rupture of coat. The release parameters, including dissolution T_50% and mean dissolution time, showed linear relationship with osmolalities of osmotic agents studied. The effect of the osmotic agent in the diffusion layer played an important role in determining the unique multiphase drug release profiles, particularly in the initial phase of dissolution, and reduced with depletion of the osmotic agent in the later phase of dissolution.