High‐Performance Pseudoplanar Heterojunction Ternary Organic Solar Cells with Nonfullerene Alloyed Acceptor

The vast majority of ternary organic solar cells are obtained by simply fabricating bulk heterojunction (BHJ) active layers. Due to the inappropriate distribution of donors and acceptors in the vertical direction, a new method by fabricating pseudoplanar heterojunction (PPHJ) ternary organic solar cells is proposed to better modulate the morphology of active layer. The pseudoplanar heterojunction ternary organic solar cells (P‐ternary) are fabricated by a sequential solution treatment technique, in which the donor and acceptor mixture blends are sequentially spin‐coated. As a consequence, a higher power conversion efficiency (PCE) of 14.2% is achieved with a V_oc of 0.79 V, J_sc of 25.6 mA cm^?2, and fill factor (FF) of 69.8% compared with the ternary BHJ system of 13.8%. At the same time, the alloyed acceptor is likely formed between two the acceptors through a series of in‐depth explorations. This work suggests that nonfullerene alloyed acceptor may have great potential to realize effective P‐ternary organic solar cells.     

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

The ternary structure that combines fullerene and nonfullerene acceptors in a photoactive layer is demonstrated as an effective approach for boosting the power conversion efficiencies (PCEs) of organic solar cells (OSCs). Here, highly efficient ternary OSCs comprising a wide‐bandgap polymer donor (PBT1‐C), a narrow‐bandgap nonfullerene acceptor (IT‐2F), and a typical fullerene derivative (PC₇₁BM) are reported. It is found that the addition of PC₇₁BM into the PBT1‐C:IT‐2F blend not only increases the device efficiency up to 12.2%, but also improves the ambient stability of the OSCs. Detailed investigations indicate that the improvement in photovoltaic performance benefits from synergistic effects of increased photon‐harvesting, enhanced charge separation and transport, suppressed trap‐assisted recombination, and optimized film morphology. Moreover, it is noticed that such a ternary system exhibits excellent tolerance to the PC₇₁BM component, for which PCEs over 11.2% can be maintained throughout the whole blend ratios, higher than that (11.0%) of PBT1‐C:IT‐2F binary reference device.     

Spiro Linkage as an Alternative Strategy for Promising Nonfullerene Acceptors in Organic Solar Cells

This work focuses on developing diketopyrrolopyrrole (DPP)‐based small molecular nonfullerene acceptors for bulk heterojunction (BHJ) organic solar cells. The materials, SF‐DPP s, have an X‐shaped geometry arising from four DPP units attached to a spirobifluorene (SF) center. The spiro‐dimer of DPP‐fluorene‐DPP is highly twisted, which suppresses strong intermolecular aggregation. Branched 2‐ethylhexyl (EH), linear n‐octyl (C8), and n‐dodecyl (C12) alkyl sides are chosen as substituents to functionalize the N,N‐positions of the DPP moiety to tune molecular interactions. SF‐DPPEH , the best candidate in SF‐DPP s family, when blended with poly(3‐hexylthiophene) (P3HT) showed a moderate crystallinity and gives a J_sc of 6.96 mA cm^?2, V_oc of 1.10 V, a fill factor of 47.5%, and a power conversion efficiency of 3.63%. However, SF‐DPPC8 and SF‐DPPC12 exhibit lower crystallinity in their BHJ blends, which is responsible for their reduced J_sc. Coupling DPP units with SF using an acetylene bridge yields SF‐A‐DPP molecules. Such a small modification leads to drastically different morphological features and far inferior device performance. These observations demonstrate a solid structure–property relationship by topology control and material design. This work offers a new molecular design approach to develop efficient small molecule nonfullerene acceptors.     

A Terminally Tetrafluorinated Nonfullerene Acceptor for Well‐Performing Alloy Ternary Solar Cells

Fabricating ternary solar cells is a pivotal strategy to improve the power conversion efficiencies (PCEs) of organic photovoltaic devices. However, it is still a challenge to simultaneously improve the performance parameters of ternary devices. Therefore, the third ingredient in ternary blends should be precisely designed or selected. Herein, a new medium‐bandgap small‐molecule acceptor, namely, 3,9‐bis(2‐methylene‐(3‐(1‐(3,5‐dimethylphenyl)‐1cyanomethylene)indanone))‐5,5,11,11‐tetrakis‐(4‐hexylphenyl)dithieno[2,3‐d:2′,3′‐d′]‐sindaceno[1,2‐b:5,6‐b′]dithiophene (ITIF), is synthesized by end‐capping with a new fluorinated, asymmetric terminal group, (Z)‐2‐(3,5‐difluorophenyl)‐2‐(3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene) acetonitrile. Replacing the CN substituent with the asymmetric 3,5‐difluorophenyl substituent obviously up‐shifts the lowest unoccupied molecular orbital (LUMO) level of ITIF to ?3.78 eV, enlarges the bandgap to 1.82 eV, and improves the absorption coefficient to ≈50% higher than that of 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)indanone))‐5,5,11,11‐tetrakis‐(4‐hexylphenyl)dithieno[2,3‐d:2′,3′‐d′]‐sindaceno[1,2‐b:5,6‐b′]dithiophene (ITIC). Due to the similar structures, ITIF and ITIC can combine as an alloyed acceptor, which makes it convenient to tune the morphology and optical and electrochemical properties of ternary blends. The enhanced absorption coefficient of ITIF and the rapid fluorescence resonance energy transfer from ITIF to ITIC remarkably improve the absorption of the ternary blend film, hence compensating for the external quantum efficiency (EQE) curves. When ITIF is introduced into ternary solar cells based on poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione)] (PBDB‐T):ITIF:ITIC blends, the PCEs of the ternary devices are increased from 9.2% to 10.5%, and the short‐circuit currents, open‐circuit voltages, and fill factors are simultaneously improved.     

Near‐Infrared Small Molecule Acceptor Enabled High‐Performance Nonfullerene Polymer Solar Cells with Over 13% Efficiency

One of the most promising approaches to achieve high‐performance polymer solar cells (PSCs) is to develop nonfullerene small molecule acceptors (SMAs) with an absorption extending to the near‐infrared (NIR) region. In this work, two novel SMAs, namely, BTTIC and BTOIC, are designed and synthesized, with optical bandgaps (E_g^opt) of 1.47 and 1.39 eV, respectively. Desipte the narrow E_g^opt, the PBDB‐T:BTTIC‐ and PBDB‐T:BTOIC‐based PSCs can maintain high V_OCs of over 0.90 and 0.86 V, respectively, with low energy losses (E_loss) < 0.6 eV. Meanwhile, due to the favorable morphology of the PBDB‐T:BTTIC blend, balanced carrier mobilities are achieved. The high external quantum efficiencies enable a high power conversion efficiency (PCE) up to 13.18% for the PBDB‐T:BTTIC‐based PSCs. In comparison, BTOIC shows an excessive crystallization propensity owing to its oxyalkyl side groups, which eventually leads to a relatively low PCE for the PBDB‐T:BTOIC‐based PSCs. Overall, this work provides insights into the design of novel NIR‐absorbing SMAs for nonfullerene PSCs.     

Fine-Tuning Alkyl Chains on Quinoxaline Nonfullerene Acceptors Enables High-Efficiency Ternary Organic Solar Cells with Optimizing Molecular Stacking and Reducing Energy Loss

Material design of guest acceptor is always a big challenge for improving the efficiency of ternary organic solar cells (OSCs). Here, a pair of isomeric nonfullerene acceptors based on quinoxaline core, Qx–p-C₇H₈O and Qx–m-C₇H₈O, is designed and synthesized. By moving the alkoxy chain attached on side phenyl from meta-position to para-position, both π–π stacking distance and crystallinity are enhanced simultaneously. They obtain the uplifted lowest unoccupied molecular orbital level. Compared to Qx–m-C₇H₈O, Qx–p-C₇H₈O exhibits wider absorption spectrum and higher extinction coefficient. Using D18-Cl:N3 as host materials, the addition of guest acceptor Qx–p-C₇H₈O significantly improves the power conversion efficiency (PCE) from 17.61% to 18.49% because of higher open-circuit voltage (0.875 V) and short-circuit current density (27.85 mA cm⁻²). This can be attributed to the faster exciton dissociation, more balanced carrier mobility, fine fiber morphology, and lower energy loss in the ternary devices. However, Qx–m-C₇H₈O-based ternary device achieves relatively low PCE of 17.17% because this device shows extremely low electron mobility. The results indicate that molecular stacking, film morphology, etc., can be effectively modulated by fine-tuning the side chains of guest materials, which may be an effective design rule for further improving the PCE of OSCs.     

Conformation Locking on Fused‐Ring Electron Acceptor for High‐Performance Nonfullerene Organic Solar Cells

In this work, sidechain engineering on conjugated fused‐ring acceptors for conformation locking is demonstrated as an effective molecular design strategy for high‐performance nonfullerene organic solar cells (OSCs). A novel nonfullerene acceptor (ITC6‐IC) is designed and developed by introducing long alkyl chains into the terminal electron‐donating building blocks. ITC6‐IC has achieved definite conformation with a planar structure and better solubility in common organic solvents. The weak electron‐donating hexyl upshifts the lowest unoccupied molecular orbital level of ITC6‐IC, resulting in a higher V_OC in comparison to the widely used ITIC. The OSCs based on PBDB‐T:ITC6‐IC reveal a promising power conversion efficiency of 11.61% and an expected high V_OC of 0.97 V. The weaker π–π stacking induced by steric hindrance affords ITC6‐IC with enhanced compatibility with polymer donors. The blend film treated with suitable thermal annealing exhibits a fibril crystallization feature with a good bicontinuous network morphology. The results indicate that the molecular design approach of ITC6‐IC can be inspirational for future development of nonfullerene acceptors for high efficiency OSCs.     

Molecular Engineering of Highly Efficient Small Molecule Nonfullerene Acceptor for Organic Solar Cells

A new molecularly engineered nonfullerene acceptor, 2,2′‐(5,5′‐(9,9‐didecyl‐9H‐fluorene‐2,7‐diyl)bis (benzo[c][1,2,5]thiadiazole‐7,4‐diyl)bis (methanylylidene))bis (3‐hexyl‐1,4‐oxothiazolidine‐5,2‐diylidene))dimalononitrile ( BAF‐4CN ), with fluorene as the core and arms of dicyano‐n‐hexylrhodanine terminated benzothiadiazole is synthesized and used as an electron acceptor in bulk heterojunction organic solar cells. BAF‐4CN shows a stronger and broader absorption with a high molar extinction coefficient of 7.8 × 10⁴m ^?1 cm^?1 at the peak position (498 nm). In the thin film, the molecule shows a redshift around 17 nm. The photoluminescence experiments confirm the excellent electron accepting nature of BAF‐4CN with a Stern–Volmer coefficient (K _sv) of 1.1 × 10⁵m ^?1. From the electrochemical studies, the highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of BAF‐4CN are estimated to be ?5.71 and ?3.55 eV, respectively, which is in good synchronization with low bandgap polymer donors. Using BAF‐4CN as an electron acceptor in a poly[(5,6‐difluoro‐2,1,3‐benzothiadiazol‐4,7‐diyl)‐alt‐(3,3″′‐di(2‐octyldodecyl) 2,2′;5′,2″;5″,2″′‐quaterthiophen‐5,5″′‐diyl)] based bulk‐heterojunction solar cell, a maximum power conversion efficiency of 8.4% with short‐circuit current values of 15.52 mA cm^?2, a fill factor of 70.7%, and external quantum efficiency of about 84% covering a broad range of wavelength is achieved.     

Mechanistic Investigation into Dynamic Function of Third Component Incorporated in Ternary Near‐Infrared Nonfullerene Organic Solar Cells

Organic solar cells (OSCs) consisting of an ultralow‐bandgap nonfullerene acceptor (NFA) with an optical absorption edge that extends to the near‐infrared (NIR) region are of vital interest to semitransparent and tandem devices. However, huge energy‐loss related to inefficient charge dissociation hinders their further development. The critical issues of charge separation as exemplified in NIR‐NFA OSCs based on the paradigm blend of PTB7–Th donor (D) and IEICO–4F acceptor (A) are revealed here. These studies corroborate efficient charge transfer between D and A, accompanied by geminate recombination of photo‐excited charge carriers. Two key factors restricting charge separation are unveiled as the connection discontinuity of individual phases in the blend and long‐lived interfacial charge‐transfer states (CTS). By incorporation of a third‐component of benchmark ITIC or PC₇₁BM with various molar ratios, these two issues are well‐resolved accordingly, yet in distinctly influencing mechanisms. ITIC molecules modulate film morphology to create more continuous paths for charge transportation, whereas PC₇₁BM diminishes CTS and enhances electron transfer at the D/A interfaces. Consequently, the optimal untreated ternary OSCs comprising 0.3 wt% ITIC and 0.1 wt% PC₇₁BM in the blend deliver higher J_SC values of 21.9 and 25.4 mA cm^‐2, and hence increased PCE of 10.2% and 10.6%, respectively.     

Atomic Optimization on Pyran-Fused Nonfullerene Acceptor Enables Organic Solar Cells With an Efficiency Approaching 16% and Reduced Energy Loss

Atomic replacement on platforms of nonfullerene acceptor (NFA) with already excellent performance is expected to further optimize the energy levels, absorptions, and even charge transfer dynamics of NFAs effectively without greatly destroying their superior molecular conformations. On the basis of high-performance F-series NFAs, the structural optimization at atomic level is performed by replacing sulfur atoms in FO-2Cl with selenium atoms, thus affording a new NFA labeled as FOSe-2Cl. FOSe-2Cl not only inherits the good planar configuration of FO-2Cl, but also exhibits more suitable energy levels, redshifted absorption, enhanced molecular packing, and accelerative charge transfer/transport dynamics compared with those of FO-2Cl. With a widely used polymer PM6 as the donor, organic solar cell (OSC) based on FOSe-2Cl affords a significantly improved power conversion efficiency (PCE) of 15.94% with a reduced energy loss (E_loss) of 0.670 eV, with respect to that of FO-2Cl-based OSC with a PCE of 14.94% and E_loss of 0.706 eV. The result represents the best performance reported to date for pyran-fused NFAs and F-series NFAs-based binary OSCs, providing another promising platform to achieve the state-of-the-art OSCs in addition to the well-known Y-series NFAs.     

Rational Mutual Interactions in Ternary Systems Enable High-Performance Organic Solar Cells

Ternary organic solar cells (TOSCs) offer a facile and efficient approach to increase the power conversion efficiencies (PCEs). However, the critical roles that guest components play in complicated ternary systems remain poorly understood. Herein, two acceptors named LA1 and LA9 with differing crystallinity are investigated. The overly crystalline LA9 induces large self-aggregates in PM6:LA9 binary system, resulting in a lower PCE (13.12%) compared to PM6:LA1 device (13.89%). Encouragingly, both acceptors are verified as efficient guest candidates into the host binary PM6:NCBDT-4Cl (PCE = 13.48%) and afford markedly improved PCEs up to 15.39% and 15.75% in LA1 and LA9 ternary devices, respectively. Interestingly, the higher crystallinity LA9 reveals smaller interaction energies with both the host acceptor and donor PM6. Compared to LA1, the appropriate mutual interactions in the LA9 ternary system not only induces the orderly crystallinity of PM6 but also better compatibility with the host acceptor, generating further optimized molecular orientations and ternary morphology. Therefore, enhanced charge transport and minimized recombination loss are detected in LA9 ternary devices, affording the most competitive performance among Y6-sbsent TOSCs. This work suggests that complicated intermolecular interactions should be seriously considered when fabricating state-of-the-art multiple components OSCs.     

Ternary Polymer Solar Cells with High Efficiency of 14.24% by Integrating Two Well‐Complementary Nonfullerene Acceptors

Ternary polymer solar cells (PSCs) are one of the most promising device architectures that maintains the simplicity of single‐junction devices and provides an important platform to better tailor the multiple performance parameters of PSCs. Herein, a ternary PSC system is reported employing a wide bandgap polymeric donor (PBTA‐PS) and two small molecular nonfullerene acceptors (labeled as LA1 and 6TIC). LA1 and 6TIC keep not only well‐matched absorption profiles but also the rational crystallization properties. As a result, the optimal ternary PSC delivers a state of the art power conversion efficiency (PCE) of 14.24%, over 40% higher than the two binary devices, resulting from the prominently increased short‐circuit current density (J_sc) of 22.33 mA cm^?2, moderate open‐circuit voltage (V_oc) of 0.84 V, and a superior fill factor approaching 76%. Notably, the outstanding PCE of the ternary PSC ranks one of the best among the reported ternary solar cells. The greatly improved performance of ternary PSCs mainly derives from combining the complementary properties such as absorption and crystallinity. This work highlights the great importance of the rational design of matched acceptors toward highly efficient ternary PSCs.     

Elimination of Drying-Dependent Component Deviation Using a Composite Solvent Strategy Enables High-Performance Inkjet-Printed Organic Solar Cells with Efficiency Approaching 16%

Inkjet printing (IJP) is a roll-to-roll (R2R) compatible fabrication method for large-area organic solar cells (OSCs). Unlike the coating process, the films are formed through droplet leveling and merging during IJP, and the pre-deposited droplets are partly dissolved by the subsequent droplets. Such a process yields undesired printing pattern lines, especially in large-area printed films. This study reveals that such a temperature-dependent “drying lines-related” phase separation morphology has caused component variation in the organic blend films, which leads to an obvious inhomogeneity of photocurrent in the printed OSCs. Such a phenomenon is attributed to the solubility difference between organic donor and acceptor molecules in the main printing solvent. A composite solvent strategy of ortho-dichlorobenzene (oDCB)/trimethylbenzene (TMB) and tetralin (THN) is developed to solve this problem. The introduction of THN suppresses the formation of printing drying lines during high-temperature printing due to the preferential miscibility of acceptor in THN, leading to the efficiency improvement to 13.96% and 15.78% for the binary and ternary devices. In addition, the 1 cm² device with a disruptive pattern gives an efficiency of 12.80% and a certificated efficiency of 12.18%.     

Influence of Blend Morphology and Energetics on Charge Separation and Recombination Dynamics in Organic Solar Cells Incorporating a Nonfullerene Acceptor

Nonfullerene acceptors (NFAs) in blends with highly crystalline donor polymers have been shown to yield particularly high device voltage outputs, but typically more modest quantum yields for photocurrent generation as well as often lower fill factors (FF). In this study, we employ transient optical and optoelectronic analysis to elucidate the factors determining device photocurrent and FF in blends of the highly crystalline donor polymer PffBT4T‐2OD with the promising NFA FBR or the more widely studied fullerene acceptor PC₇₁BM. Geminate recombination losses, as measured by ultrafast transient absorption spectroscopy, are observed to be significantly higher for PffBT4T‐2OD:FBR blends. This is assigned to the smaller LUMO‐LUMO offset of the PffBT4T‐2OD:FBR blends relative to PffBT4T‐2OD:PC₇₁BM, resulting in the lower photocurrent generation efficiency obtained with FBR. Employing time delayed charge extraction measurements, these geminate recombination losses are observed to be field dependent, resulting in the lower FF observed with PffBT4T‐2OD:FBR devices. These data therefore provide a detailed understanding of the impact of acceptor design, and particularly acceptor energetics, on organic solar cell performance. Our study concludes with a discussion of the implications of these results for the design of NFAs in organic solar cells.     

Wide Bandgap Molecular Acceptors with a Truxene Core for Efficient Nonfullerene Polymer Solar Cells: Linkage Position on Molecular Configuration and Photovoltaic Properties

Two wide bandgap star‐shaped small molecular acceptors, para‐TrBRCN and meta‐TrBRCN , are synthesized for efficient nonfullerene polymer solar cells (PSCs). The tiny structural variation by just changing the linkage positions affects largely the inherent properties of the resulting molecules. Both molecules have a nonplanar 3D structure, which can prevent the excessively aggregation to realize the optimized morphology and ideal domain size in their active blends. Compared to para‐TrBRCN , meta‐TrBRCN exhibits the smaller distortions between the truxene skeleton and the benzothiadiazole units, which would also lead to the enhanced π–π stacking and charge transfer. When blending with PTB7‐Th, high power conversion efficiencies (PCEs) of 10.15% and 8.28% are obtained for meta‐TrBRCN and para‐TrBRCN devices, respectively. To make up the weak absorption of above binary active blend in the longer wavelength region and increase the whole device performance further, low bandgap 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone)‐5,5,11,11‐tetrakis(4‐hexylthienyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]‐dithiophene (ITIC‐Th) is added as the second acceptor material to fabricate ternary blend PSCs. After adding 20 wt% of ITIC‐Th, the resulting devices exhibit the well‐balanced optical absorption and fine‐tuned morphology, giving rise to the significantly improved PCE of 11.40% with much higher J _sc of 18.25 mA cm^?2 and fill factor of 70.2%.     

Printable and Large‐Area Organic Solar Cells Enabled by a Ternary Pseudo‐Planar Heterojunction Strategy

Bulk heterojunction (BHJ) processing technology has had an irreplaceable role in the development of organic solar cells (OSCs) in the past decades due to the significant advantages in achieving high‐power conversion efficiency (PCE). However, the difficulty in exploring and regulating morphology makes it inadequate for upscaling large‐area OSCs. In this work, printable high‐performance ternary devices are fabricated by a pseudo‐planar heterojunction (PPHJ) strategy. The fullerene derivative indene‐C₆₀ bisadduct (ICBA) is incorporated into PM6/IT‐4F system to expand the vertical phase separation and facilitate an obvious PPHJ structure. After the addition of ICBA, the IT‐4F enriches on the surface of active layer, while PM6 is accumulated underneath. Furthermore, it increases the crystallinity of PM6, which facilitates exciton dissociation and charge transfer. Accordingly, 1.05 cm² devices are fabricated by blade‐coating with an enhanced PCE of 14.25% as compared to the BHJ devices (13.73%). The ternary PPHJ strategy provides an effective way to optimize the vertical phase separation of organic semiconductor during scalable printing methods.     

Realizing an Unprecedented Fill Factor of 82.2% in Ternary Organic Solar Cells via Co-Crystallization of Non-Fullerene Acceptors

Ternary strategy is demonstrated as an efficient approach to achieve high short-circuit current and open-circuit voltage to boost the performance of organic solar cells (OSCs), however, the realization of high fill-factor (FF) in ternary OSCs has been rare. In this study, three thiophene terminated non-fullerene acceptors (NFAs) with methyl or chlorine substitutions on their end-groups are designed and synthesized, and further incorporated into the state-of-the-art PM6:L8-BO system to construct ternary OSCs. Subtle changes in their chemical structures significantly modify the molecular packings of these thiophene terminated NFAs. While BTP-ThMe and BTP-ThCl have limited forms of dimer, versatile molecular dimers, including “Z” shaped D-D, “S” shaped A-A, and “F” shaped A-D packings exist in BTP-ThMeCl, which lead to the formation of compact 3D honey-comb network and this is analogous to the host acceptor L8-BO. This synergetic molecular packing between BTP-ThMeCl and L8-BO contributes to maintain the 3D charge transport network in the ternary system via the formation of NFA co-crystals at the molecular level, and consequently realizing a maximum power conversion efficiency of 19.1% with a superior FF of 82.2%, which is the highest FF reported so far for OSCs.     

Achieving Organic Solar Cells with an Efficiency of 18.80% by Reducing Nonradiative Energy Loss and Tuning Active Layer Morphology

The efficiency of organic solar cells (OSCs) is primarily limited by their significant nonradiative energy loss and unfavorable active layer morphology. Achieving high-efficiency OSCs by suppressing nonradiative energy loss and tuning the active layer morphology remains a challenging task. In this study, an acceptor named CH-ThCl is designed, featuring an extended conjugation central core, dichlorodithienoquinoxaline. The incorporation of chlorine-substituted extended conjugation in the central core enhances the acceptor's rigidity and promotes J-aggregation, leading to improved molecular luminescent efficiency and a reduction in nonradiative energy loss. A binary device based on PM6: CH-ThCl demonstrates a power conversion efficiency (PCE) of 18.16% and exhibits a high open-circuit voltage (V_oc) of 0.934 V, attributed to the remarkably low nonradiative energy loss of 0.21 eV. Furthermore, a ternary device is fabricated by incorporating CH-6F as the third component, resulting in a significantly enhanced PCE of 18.80%. The ternary device exhibits improvements in short-circuit current (J_sc) and fill factor (FF) while maintaining the V_oc, primarily due to the optimized active layer morphology. These results highlight the effectiveness of combining the reduction of nonradiative energy loss and precise tuning of the active layer morphology as a viable strategy for achieving high-efficiency OSCs.     

Impact of Nonfullerene Molecular Architecture on Charge Generation,Transport, and Morphology in PTB7‐Th‐Based Organic Solar Cells

Despite the rapid development of nonfullerene acceptors (NFAs), the fundamental understanding on the relationship between NFA molecular architecture, morphology, and device performance is still lacking. Herein, poly[[4,8‐bis[5‐(2‐ethylhexyl)thiophene‐2‐yl]benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]‐thieno[3,4‐b]thiophenediyl]] (PTB7‐Th) is used as the donor polymer to compare an NFA with a 3D architecture (SF‐PDI4) to a well‐studied NFA with a linear acceptor–donor–acceptor (A–D–A) architecture (ITIC). The data suggest that the NFA ITIC with a linear molecular structure shows a better device performance due to an increase in short‐circuit current ( J_sc) and fill factor (FF) compared to the 3D SF‐PDI4. The charge generation dynamics measured by femtosecond transient absorption spectroscopy (TAS) reveals that the exciton dissociation process in the PTB7‐Th:ITIC films is highly efficient. In addition, the PTB7‐Th:ITIC blend shows a higher electron mobility and lower energetic disorder compared to the PTB7‐Th:SF‐PDI4 blend, leading to higher values of J_sc and FF. The compositional sensitive resonant soft X‐ray scattering (R‐SoXS) results indicate that ITIC molecules form more pure domains with reduced domain spacing, resulting in more efficient charge transport compared with the SF‐PDI4 blend. It is proposed that both the molecular structure and the corresponding morphology of ITIC play a vital role for the good solar cell device performance.     

Retarding the Crystallization of a Nonfullerene Electron Acceptor for High‐Performance Polymer Solar Cells

Developing a fundamental understanding of the molecular order within the photoactive layer, and the influence therein of solution casting conditions, is a key factor in obtaining high power conversation efficiency (PCE) polymer solar cells. Herein, the molecular order in PBDB‐T:INPIC‐4F nonfullerene solar cells is tuned by control of the molecular organization time during film casting, and the crucial role of retarding the crystallization of INPIC‐4F in achieving high performance is demonstrated. When PBDB‐T:INPIC‐4F is cast with the presence of solvent vapor to prolong the organization time, INPIC‐4F molecules form spherulites with a polycrystalline structure, resulting in large phase separation and device efficiency below 10%. On the contrary, casting the film on a hot substrate is effective in suppressing the formation of the polycrystalline structure, and encourages face‐on π?π stacking of INPIC‐4F. This molecular transformation of INPIC‐4F significantly enhances the absorption ability of INPIC‐4F at long wavelengths and facilitates a fine phase separation to support efficient exciton dissociation and balanced charge transport, leading to the achievement of a maximum PCE of 13.1%. This work provides a rational guide for optimizing nonfullerene polymer solar cells consisting of highly crystallizable small molecular electron acceptors.