Multicore–Shell Bi@N‐doped Carbon Nanospheres for High Power Density and Long Cycle Life Sodium‐ and Potassium‐Ion Anodes

Bismuth (Bi) is an attractive material as anodes for both sodium‐ion batteries (NIBs) and potassium‐ion batteries (KIBs), because it has a high theoretical gravimetric capacity (386 mAh g^?1) and high volumetric capacity (3800 mAh L^?1). The main challenges associated with Bi anodes are structural degradation and instability of the solid electrolyte interphase (SEI) resulting from the huge volume change during charge/discharge. Here, a multicore–shell structured Bi@N‐doped carbon (Bi@N‐C) anode is designed that addresses these issues. The nanosized Bi spheres are encapsulated by a conductive porous N‐doped carbon shell that not only prevents the volume expansion during charge/discharge but also constructs a stable SEI during cycling. The Bi@N‐C exhibits unprecedented rate capability and long cycle life for both NIBs (235 mAh g^?1 after 2000 cycles at 10 A g^?1) and KIBs (152 mAh g^?1 at 100 A g^?1). The kinetic analysis reveals the outstanding electrochemical performance can be attributed to significant pseudocapacitance behavior upon cycling.     

Optimization of Von Mises Stress Distribution in Mesoporous α‐Fe2O3/C Hollow Bowls Synergistically Boosts Gravimetric/Volumetric Capacity and High‐Rate Stability in Alkali‐Ion Batteries

Hollow structures are often used to relieve the intrinsic strain on metal oxide electrodes in alkali‐ion batteries. Nevertheless, one common drawback is that the large interior space leads to low volumetric energy density and inferior electric conductivity. Here, the von Mises stress distribution on a mesoporous hollow bowl (HB) is simulated via the finite element method, and the vital role of the porous HB structure on strain‐relaxation behavior is confirmed. Then, N‐doped‐C coated mesoporous α‐Fe₂O₃ HBs are designed and synthesized using a multistep soft/hard‐templating strategy. The material has several advantages: (i) there is space to accommodate strains without sacrificing volumetric energy density, unlike with hollow spheres; (ii) the mesoporous hollow structure shortens ion diffusion lengths and allows for high‐rate induced lithiation reactivation; and (iii) the N‐doped carbon nanolayer can enhance conductivity. As an anode in lithium‐ion batteries, the material exhibits a very high reversible capacity of 1452 mAh g^?1 at 0.1 A g^?1, excellent cycling stability of 1600 cycles (964 mAh g^?1 at 2 A g^?1), and outstanding rate performance (609 mAh g^?1 at 8 A g^?1). Notably, the volumetric specific capacity of composite electrode is 42% greater than that of hollow spheres. When used in potassium‐ion batteries, the material also shows high capacity and cycle stability.     

Self‐Assembly of Flexible Free‐Standing 3D Porous MoS2‐Reduced Graphene Oxide Structure for High‐Performance Lithium‐Ion Batteries

Flexible freestanding electrodes are highly desired to realize wearable/flexible batteries as required for the design and production of flexible electronic devices. Here, the excellent electrochemical performance and inherent flexibility of atomically thin 2D MoS₂ along with the self‐assembly properties of liquid crystalline graphene oxide (LCGO) dispersion are exploited to fabricate a porous anode for high‐performance lithium ion batteries. Flexible, free‐standing MoS₂–reduced graphene oxide (MG) film with a 3D porous structure is fabricated via a facile spontaneous self‐assembly process and subsequent freeze‐drying. This is the first report of a one‐pot self‐assembly, gelation, and subsequent reduction of MoS₂/LCGO composite to form a flexible, high performance electrode for charge storage. The gelation process occurs directly in the mixed dispersion of MoS₂ and LCGO nanosheets at a low temperature (70 °C) and normal atmosphere (1 atm). The MG film with 75 wt% of MoS₂ exhibits a high reversible capacity of 800 mAh g^?1 at a current density of 100 mA g^?1. It also demonstrates excellent rate capability, and excellent cycling stability with no capacity drop over 500 charge/discharge cycles at a current density of 400 mA g^?1.     

Ultrathin MoS2 Nanosheets@Metal Organic Framework‐Derived N‐Doped Carbon Nanowall Arrays as Sodium Ion Battery Anode with Superior Cycling Life and Rate Capability

This study reports the design and fabrication of ultrathin MoS₂ nanosheets@metal organic framework‐derived N‐doped carbon nanowall array hybrids on flexible carbon cloth (CC@CN@MoS₂) as a free‐standing anode for high‐performance sodium ion batteries. When evaluated as an anode for sodium ion battery, the as‐fabricated CC@CN@MoS₂ electrode exhibits a high capacity (653.9 mA h g^?1 of the second cycle and 619.2 mA h g^?1 after 100 cycles at 200 mA g^?1), excellent rate capability, and long cycling life stability (265 mA h g^?1 at 1 A g^?1 after 1000 cycles). The excellent electrochemical performance can be attributed to the unique 2D hybrid structures, in which the ultrathin MoS₂ nanosheets with expanded interlayers can provide shortened ion diffusion paths and favorable Na⁺ insertion/extraction space, and the porous N‐doped carbon nanowall arrays on flexible carbon cloth are able to improve the conductivity and maintain the structural integrity. Moreover, the N‐doping‐induced defects also make them favorable for the effective storage of sodium ions, which enables the enhanced capacity and rate performance of MoS₂.     

Enhanced Reversible Sodium‐Ion Intercalation by Synergistic Coupling of Few‐Layered MoS2 and S‐Doped Graphene

Sodium‐ion batteries (SIBs) are regarded as the best alternative to lithium‐ion batteries due to their low cost and similar Na⁺ insertion chemistry. It is still challenging but greatly desired to design and develop novel electrode materials with high reversible capacity, long cycling life, and good rate capability toward high‐performance SIBs. This work demonstrates an innovative design strategy and a development of few‐layered molybdenum disulfide/sulfur‐doped graphene nanosheets (MoS₂/SG) composites as the SIB anode material providing a high specific capacity of 587 mA h g^?1 calculated based on the total composite mass and an extremely long cycling stability over 1000 cycles at a current density of 1.0 A g^?1 with a high capacity retention of ≈85%. Systematic characterizations reveal that the outstanding performance is mainly attributed to the unique and robust composite architecture where few‐layered MoS₂ and S‐doped graphene are intimately bridged at the hetero‐interface through a synergistic coupling effect via the covalently doped S atoms. The design strategy and mechanism understanding at the molecular level outlined here can be readily applied to other layered transition metal oxides for SIBs anode and play a key role in contributing to the development of high‐performance SIBs.     

Solid‐State Plastic Crystal Electrolytes: Effective Protection Interlayers for Sulfide‐Based All‐Solid‐State Lithium Metal Batteries

All‐solid‐state lithium metal batteries (ASSLMBs) have attracted significant attention due to their superior safety and high energy density. However, little success has been made in adopting Li metal anodes in sulfide electrolyte (SE)‐based ASSLMBs. The main challenges are the remarkable interfacial reactions and Li dendrite formation between Li metal and SEs. In this work, a solid‐state plastic crystal electrolyte (PCE) is engineered as an interlayer in SE‐based ASSLMBs. It is demonstrated that the PCE interlayer can prevent the interfacial reactions and lithium dendrite formation between SEs and Li metal. As a result, ASSLMBs with LiFePO₄ exhibit a high initial capacity of 148 mAh g^?1 at 0.1 C and 131 mAh g^?1 at 0.5 C (1 C = 170 mA g^?1), which remains at 122 mAh g^?1 after 120 cycles at 0.5 C. All‐solid‐state Li‐S batteries based on the polyacrylonitrile‐sulfur composite are also demonstrated, showing an initial capacity of 1682 mAh g^?1. The second discharge capacity of 890 mAh g^?1 keeps at 775 mAh g^?1 after 100 cycles. This work provides a new avenue to address the interfacial challenges between Li metal and SEs, enabling the successful adoption of Li metal in SE‐based ASSLMBs with high energy density.     

Walnut‐Like Multicore–Shell MnO Encapsulated Nitrogen‐Rich Carbon Nanocapsules as Anode Material for Long‐Cycling and Soft‐Packed Lithium‐Ion Batteries

Metal oxide‐based nanomaterials are widely studied because of their high‐energy densities as anode materials in lithium‐ion batteries. However, the fast capacity degradation resulting from the large volume expansion upon lithiation hinders their practical application. In this work, the preparation of walnut‐like multicore–shell MnO encapsulated nitrogen‐rich carbon nanocapsules (MnO@NC) is reported via a facile and eco‐friendly process for long‐cycling Li‐ion batteries. In this hybrid structure, MnO nanoparticles are uniformly dispersed inside carbon nanoshells, which can simultaneously act as a conductive framework and also a protective buffer layer to restrain the volume variation. The MnO@NC nanocapsules show remarkable electrochemical performances for lithium‐ion batteries, exhibiting high reversible capability (762 mAh g^?1 at 100 mA g^?1) and stable cycling life (624 mAh g^?1 after 1000 cycles at 1000 mA g^?1). In addition, the soft‐packed full batteries based on MnO@NC nanocapsules anodes and commercial LiFePO₄ cathodes present good flexibility and cycling stability.     

Freestanding Metallic 1T MoS2 with Dual Ion Diffusion Paths as High Rate Anode for Sodium‐Ion Batteries

This work studies for the first time the metallic 1T MoS₂ sandwich grown on graphene tube as a freestanding intercalation anode for promising sodium‐ion batteries (SIBs). Sodium is earth‐abundant and readily accessible. Compared to lithium, the main challenge of sodium‐ion batteries is its sluggish ion diffusion kinetic. The freestanding, porous, hollow structure of the electrode allows maximum electrolyte accessibility to benefit the transportation of Na⁺ ions. Meanwhile, the metallic MoS₂ provides excellent electron conductivity. The obtained 1T MoS₂ electrode exhibits excellent electrochemical performance: a high reversible capacity of 313 mAh g^?1 at a current density of 0.05 A g^?1 after 200 cycles and a high rate capability of 175 mAh g^?1 at 2 A g^?1. The underlying mechanism of high rate performance of 1T MoS₂ for SIBs is the high electrical conductivity and excellent ion accessibility. This study sheds light on using the 1T MoS₂ as a novel anode for SIBs.     

Few‐Layered SnS2 on Few‐Layered Reduced Graphene Oxide as Na‐Ion Battery Anode with Ultralong Cycle Life and Superior Rate Capability

Na‐ion Batteries have been considered as promising alternatives to Li‐ion batteries due to the natural abundance of sodium resources. Searching for high‐performance anode materials currently becomes a hot topic and also a great challenge for developing Na‐ion batteries. In this work, a novel hybrid anode is synthesized consisting of ultrafine, few‐layered SnS₂ anchored on few‐layered reduced graphene oxide (rGO) by a facile solvothermal route. The SnS₂/rGO hybrid exhibits a high capacity, ultralong cycle life, and superior rate capability. The hybrid can deliver a high charge capacity of 649 mAh g^?1 at 100 mA g^?1. At 800 mA g^?1 (1.8 C), it can yield an initial charge capacity of 469 mAh g^?1, which can be maintained at 89% and 61%, respectively, after 400 and 1000 cycles. The hybrid can also sustain a current density up to 12.8 A g^?1 (≈28 C) where the charge process can be completed in only 1.3 min while still delivering a charge capacity of 337 mAh g^?1. The fast and stable Na‐storage ability of SnS₂/rGO makes it a promising anode for Na‐ion batteries.     

Cobalt‐Doped SnS2 with Dual Active Centers of Synergistic Absorption‐Catalysis Effect for High‐S Loading Li‐S Batteries

The application of Li‐S batteries is hindered by low sulfur utilization and rapid capacity decay originating from slow electrochemical kinetics of polysulfide transformation to Li₂S at the second discharge plateau around 2.1 V and harsh shuttling effects for high‐S‐loading cathodes. Herein, a cobalt‐doped SnS₂ anchored on N‐doped carbon nanotube (NCNT@Co‐SnS₂) substrate is rationally designed as both a polysulfide shield to mitigate the shuttling effects and an electrocatalyst to improve the interconversion kinetics from polysulfides to Li₂S. As a result, high‐S‐loading cathodes are demonstrated to achieve good cycling stability with high sulfur utilization. It is shown that Co‐doping plays an important role in realizing high initial capacity and good capacity retention for Li‐S batteries. The S/NCNT@Co‐SnS₂ cell (3 mg cm^?2 sulfur loading) delivers a high initial specific capacity of 1337.1 mA h g^?1 (excluding the Co‐SnS₂ capacity contribution) and 1004.3 mA h g^?1 after 100 cycles at a current density of 1.3 mA cm^?2, while the counterpart cell (S/NCNT@SnS₂) only shows an initial capacity of 1074.7 and 843 mA h g^?1 at the 100th cycle. The synergy effect of polysulfide confinement and catalyzed polysulfide conversion provides an effective strategy in improving the electrochemical performance for high‐sulfur‐loading Li‐S batteries.     

Yolk–Shell Structured Assembly of Bamboo‐Like Nitrogen‐Doped Carbon Nanotubes Embedded with Co Nanocrystals and Their Application as Cathode Material for Li–S Batteries

Despite their high theoretical specific capacity (1675 mA h g^?1), the practical application of Li–S batteries remains limited because the capacity rapidly degrades through severe dissolution of lithium polysulfide and the rate capability is low because of the low electronic conductivity of sulfur. This paper describes novel hierarchical yolk–shell microspheres comprising 1D bamboo‐like N‐doped carbon nanotubes (CNTs) encapsulating Co nanoparticles (Co@BNCNTs YS microspheres) as efficient cathode hosts for Li–S batteries. The microspheres are produced via a two‐step process that involves generation of the microsphere followed by N‐doped CNTs growth. The hierarchical yolk–shell structure enables efficient sulfur loading and mitigates the dissolution of lithium polysulfides, and metallic Co and N doping improves the chemical affinity of the microspheres with sulfur species. Accordingly, a Co@BNCNTs YS microsphere‐based cathode containing 64 wt% sulfur exhibits a high discharge capacity of 700.2 mA h g^?1 after 400 cycles at a current density of 1 C (based on the mass of sulfur); this corresponds to a good capacity retention of 76% and capacity fading rate of 0.06% per cycle with an excellent rate performance (752 mA h g^?1 at 2.0 C) when applied as cathode hosts for Li–S batteries.     

Layered P2‐Type K0.65Fe0.5Mn0.5O2 Microspheres as Superior Cathode for High‐Energy Potassium‐Ion Batteries

Potassium‐ion batteries have been regarded as the potential alternatives to lithium‐ion batteries (LIBs) due to the low cost, earth abundance, and low potential of K (?2.936 vs standard hydrogen electrode (SHE)). However, the lack of low‐cost cathodes with high energy density and long cycle life always limits its application. In this work, high‐energy layered P2‐type hierarchical K_0.65Fe_0.5Mn_0.5O₂ (P2‐KFMO) microspheres, assembled by the primary nanoparticles, are fabricated via a modified solvent‐thermal method. Benefiting from the unique microspheres with primary nanoparticles, the K⁺ intercalation/deintercalation kinetics of P2‐KFMO is greatly enhanced with a stabilized cathodic electrolyte interphase on the cathode. The P2‐KFMO microsphere presents a highly reversible potassium storage capacity of 151 mAh g^?1 at 20 mA g^?1, fast rate capability of 103 mAh g^?1 at 100 mA g^?1, and long cycling stability with 78% capacity retention after 350 cycles. A full cell with P2‐KFMO microspheres as cathode and hard carbon as anode is constructed, which exhibits long‐term cycling stability (>80% of retention after 100 cycles). The present high‐performance P2‐KFMO microsphere cathode synthesized using earth‐abundant elements provides a new cost‐effective alternative to LIBs for large‐scale energy storage.     

Facile Spraying Synthesis and High‐Performance Sodium Storage of Mesoporous MoS2/C Microspheres

A facile one‐step spraying synthesis of MoS₂/C microspheres and their enhanced electrochemical performance as anode of sodium‐ion batteries is reported. An aerosol spraying pyrolysis without any template is employed to synthesize MoS₂/C microspheres, in which ultrathin MoS₂ nanosheets (≈2 nm) with enlarged interlayers (≈0.64 nm) are homogeneously embedded in mesoporous carbon microspheres. The as‐synthesized mesoporous MoS₂/C microspheres with 31 wt% carbon have been applied as an anode material for sodium ion batteries, demonstrating long cycling stability (390 mAh g^?1 after 2500 cycles at 1.0 A g^?1) and high rate capability (312 mAh g^?1 at 10.0 A g^?1 and 244 mAh g^?1 at 20.0 A g^?1). The superior electrochemical performance is due to the uniform distribution of ultrathin MoS₂ nanosheets in mesoporous carbon frameworks. This kind of structure not only effectively improves the electronic and ionic transport through MoS₂/C microspheres, but also minimizes the influence of pulverization and aggregation of MoS₂ nanosheets during repeated sodiation and desodiation.     

Face‐to‐Face Contact and Open‐Void Coinvolved Si/C Nanohybrids Lithium‐Ion Battery Anodes with Extremely Long Cycle Life

To develop high‐performance anode materials of lithium‐ion batteries (LIBs) instead of commercial graphite for practical applications, herein, a layer of silicon has been well‐anchored onto a 3D graphene/carbon nanotube (CNT) aerogels (CAs) framework with face‐to‐face contact and balanced open void by a simple chemical vapor deposition strategy. The engineered contact interface between CAs and Si creates high‐efficiency channels for the rapid electrons and lithium ions transport, and meanwhile, the balanced open‐void allows the free expansion of Si during cycling while maintaining high structural integrity due to the robust mechanical strength of 3D CAs framework. As a consequence, the as‐synthesized Si/CAs nanohybrids are highly stable anode materials for LIBs with a high reversible discharge capacity (1498 mAh g^?1 at 200 mA g^?1) and excellent rate capability (462 mAh g^?1 at 10 000 mA g^?1), which is much better than Si/graphene‐CNTs‐mixture (51 mAh g^?1 at 10 000 mA g^?1). More significantly, it is found that the Si/CAs nanohybrids display no obvious capacity decline even after 2000 cycles at a high current density of 10 000 mA g^?1. The present Si/CAs nanohybrids are one of the most stable Si‐based anode materials ever reported for LIBs to date.     

Graphitic Nanocarbon with Engineered Defects for High‐Performance Potassium‐Ion Battery Anodes

The application of graphite anodes in potassium‐ion batteries (KIB) is limited by the large variation in lattice volume and the low diffusion coefficient of potassium ions during (de)potassiation. This study demonstrates nitrogen‐doped, defect‐rich graphitic nanocarbons (GNCs) as high‐performance KIB anodes. The GNCs with controllable defect densities are synthesized by annealing an ethylenediaminetetraacetic acid nickel coordination compound. The GNCs show better performance than the previously reported thin‐walled graphitic carbonaceous materials such as carbon nanocages and nanotubes. In particular, the GNC prepared at 600 °C shows a stabilized capacity of 280 mAh g^?1 at 50 mA g^?1, robust rate capability, and long cycling life due to its high‐nitrogen‐doping, short‐range‐ordered, defect‐rich graphitic structure. A high capacity of 189 mAh g^?1 with a long cycle life over 200 cycles is demonstrated at a current density of 200 mA g^?1. Further, it is confirmed that the potassium ion storage mechanism of GNCs is different from that of graphite using multiple characterization methods. Specifically, the GNCs with numerous defects provide more active sites for the potassiation process, which results in a final discharge product with short‐range order. This study opens a new pathway for designing graphitic carbonaceous materials for KIB anodes.     

Rambutan‐Like Hybrid Hollow Spheres of Carbon Confined Co3O4 Nanoparticles as Advanced Anode Materials for Sodium‐Ion Batteries

Transition metal oxides, possessing high theoretical specific capacities, are promising anode materials for sodium‐ion batteries. However, the sluggish sodiation/desodiation kinetics and poor structural stability restrict their electrochemical performance. To achieve high and fast Na storage capability, in this work, rambutan‐like hybrid hollow spheres of carbon confined Co₃O₄ nanoparticles are synthesized by a facile one‐pot hydrothermal treatment with postannealing. The hierarchy hollow structure with ultrafine Co₃O₄ nanoparticles embedded in the continuous carbon matrix enables greatly enhanced structural stability and fast electrode kinetics. When tested in sodium‐ion batteries, the hollow structured composite electrode exhibits an outstandingly high reversible specific capacity of 712 mAh g^?1 at a current density of 0.1 A g^?1, and retains a capacity of 223 mAh g^?1 even at a large current density of 5 A g^?1. Besides the superior Na storage capability, good cycle performance is demonstrated for the composite electrode with 74.5% capacity retention after 500 cycles, suggesting promising application in advanced sodium‐ion batteries.     

Facile Preparation of High‐Content N‐Doped CNT Microspheres for High‐Performance Lithium Storage

Herein, high‐content N‐doped carbon nanotube (CNT) microspheres (HNCMs) are successfully synthesized through simple spray drying and one‐step pyrolysis. HNCM possesses a hierarchically porous architecture and high‐content N‐doping. In particular, HNCM800 (HNCM pyrolyzed at 800 °C) shows high nitrogen content of 12.43 at%. The porous structure derived from well‐interconnected CNTs not only offers a highly conductive network and blocks diffusion of soluble lithium polysulfides (LiPSs) in physical adsorption, but also allows sufficient sulfur infiltration. The incorporation of N‐rich CNTs provides strong chemical immobilization for LiPSs. As a sulfur host for lithium–sulfur batteries, good rate capability and high cycling stability is achieved for HNCM/S cathodes. Particularly, the HNCM800/S cathode delivers a high capacity of 804 mA h g^?1 at 0.5 C after 1000 cycles corresponding to low fading rate (FR) of only 0.011% per cycle. Remarkably, the cathode with high sulfur loading of 6 mg cm^?2 still maintains high cyclic stability (capacity of 555 mA h g^?1 after 1000 cycles, FR 0.038%). Additionally, CNT/Co₃O₄ microspheres are obtained by the oxidation of CNTs/Co in the air. The as‐prepared CNT/Co₃O₄ microspheres are employed as an anode for lithium‐ion batteries and present excellent cycling performance.     

Engineering Hierarchical Hollow Nickel Sulfide Spheres for High‐Performance Sodium Storage

Sodium‐ion batteries (SIBs) are considered as promising alternatives to lithium‐ion batteries (LIBs) for energy storage due to the abundance of sodium, especially for grid distribution systems. The practical implementation of SIBs, however, is severely hindered by their low energy density and poor cycling stability due to the poor electrochemical performance of the existing electrodes. Here, to achieve high‐capacity and durable sodium storage with good rate capability, hierarchical hollow NiS spheres with porous shells composed of nanoparticles are designed and synthesized by tuning the reaction parameters. The formation mechanism of this unique structure is systematically investigated, which is clearly revealed to be Ostwald ripening mechanism on the basis of the time‐dependent morphology evolution. The hierarchical hollow structure provides sufficient electrode/electrolyte contact, shortened Na⁺ diffusion pathways, and high strain‐tolerance capability. The hollow NiS spheres deliver high reversible capacity (683.8 mAh g^?1 at 0.1 A g^?1), excellent rate capability (337.4 mAh g^?1 at 5 A g^?1), and good cycling stability (499.9 mAh g^?1 with 73% retention after 50 cycles at 0.1 A g^?1).     

Potassium Prussian Blue Nanoparticles: A Low‐Cost Cathode Material for Potassium‐Ion Batteries

Potassium‐ion batteries (KIBs) in organic electrolytes hold great promise as an electrochemical energy storage technology owing to the abundance of potassium, close redox potential to lithium, and similar electrochemistry with lithium system. Although carbon materials have been studied as KIB anodes, investigations on KIB cathodes have been scarcely reported. A comprehensive study on potassium Prussian blue K_0.220Fe[Fe(CN)₆]_0.805?4.01H₂O nanoparticles as a potential cathode material is for the first time reported. The cathode exhibits a high discharge voltage of 3.1–3.4 V, a high reversible capacity of 73.2 mAh g^?1, and great cyclability at both low and high rates with a very small capacity decay rate of ≈0.09% per cycle. Electrochemical reaction mechanism analysis identifies the carbon‐coordinated Fe^III/Fe^II couple as redox‐active site and proves structural stability of the cathode during charge/discharge. Furthermore, for the first time, a KIB full‐cell is presented by coupling the nanoparticles with commercial carbon materials. The full‐cell delivers a capacity of 68.5 mAh g^?1 at 100 mA g^?1 and retains 93.4% of the capacity after 50 cycles. Considering the low cost and material sustainability as well as the great electrochemical performances, this work may pave the way toward more studies on KIB cathodes and trigger future attention on rechargeable KIBs.     

A Composite of Carbon‐Wrapped Mo2C Nanoparticle and Carbon Nanotube Formed Directly on Ni Foam as a High‐Performance Binder‐Free Cathode for Li‐O2 Batteries

Cathode design is indispensable for building Li‐O₂ batteries with long cycle life. A composite of carbon‐wrapped Mo₂C nanoparticles and carbon nanotubes is prepared on Ni foam by direct hydrolysis and carbonization of a gel composed of ammonium heptamolybdate tetrahydrate and hydroquinone resin. The Mo₂C nanoparticles with well‐controlled particle size act as a highly active oxygen reduction reactions/oxygen evolution reactions (ORR/OER) catalyst. The carbon coating can prevent the aggregation of the Mo₂C nanoparticles. The even distribution of Mo₂C nanoparticles results in the homogenous formation of discharge products. The skeleton of porous carbon with carbon nanotubes protrudes from the composite, resulting in extra voids when applied as a cathode for Li‐O₂ batteries. The batteries deliver a high discharge capacity of ≈10 400 mAh g^?1 and a low average charge voltage of ≈4.0 V at 200 mA g^?1. With a cutoff capacity of 1000 mAh g^?1, the Li‐O₂ batteries exhibit excellent charge–discharge cycling stability for over 300 cycles. The average potential polarization of discharge/charge gaps is only ≈0.9 V, demonstrating the high ORR and OER activities of these Mo₂C nanoparticles. The excellent cycling stability and low potential polarization provide new insights into the design of highly reversible and efficient cathode materials for Li‐O₂ batteries.