Site‐Specific Placement of Au Nanoparticles on Chemical Nanopatterns Prepared by Molecular Transfer Printing Using Block‐Copolymer Films

Inexpensive, large area patterning of ex‐situ synthesized metallic nanoparticles (NPs) at the nanoscale may enable many technologies including plasmonics, nanowire growth, and catalysis. Here, site‐specific localization of Au NPs onto nanoscale chemical patterns of polymer brushes is investigated. In this approach, patterns of hydroxyl‐terminated poly(styrene) brushes are transferred from poly(styrene‐block‐methyl methacrylate) (PS‐b‐PMMA) block copolymer films onto a replica substrate via molecular transfer printing, and the remaining areas are filled with hydroxyl‐terminated poly(2‐vinyl pyridine) (P2VP‐OH) brushes. Citrate‐stabilized Au NPs (13 nm) selectively bind to P2VP‐OH functionalized regions and the quality of the resulting assemblies depends on high chemical contrast in the patterned brushes. Minimization of the interpenetration of P2VP‐OH chains into PS brushes during processing is the key for achieving high chemical contrast. Large area hexagonal arrays of single Au NPs with a placement accuracy of 3.4 nm were obtained on patterns (～20 nm spots, ～40 nm pitch) derived from self‐assembled cylinder‐forming PS‐b‐PMMA films. Linear arrays of Au NPs were generated on patterns (40 nm lines, 80nm pitch) derived from lamellae‐forming PS‐b‐PMMA that had been directed to assemble on lithographically defined masters.     

Gram‐Negative Bacteria Targeting Mediated by Carbohydrate–Carbohydrate Interactions Induced by Surface‐Modified Nanoparticles

Antibiotic resistant pathogens are a modern threat to the human health. As a worldwide spreading problem, there is an urgency for new strategies to minimize antibiotic resistance, particularly the super‐resistant strains. Here, the efficient design of carbohydrate‐coated silica nanoparticles is reported which specifically target Gram‐negative bacteria cells. The system is functionalized with gluconamide moieties and demonstrates increased binding ability to the bacterial membrane, enabling controlled drug delivery onto the pathogen wall. In addition, the high stability of the nanoparticles in biological media and the lack of non‐specific protein adhesion are engendered by such functionalization, which also demonstrates low cytotoxicity and hemolytic activity prevention. Local interaction between nanoparticles and the bacterium membrane is experimentally accessed at the biomolecular level unveiling a short‐range chemical connection. Atomistic molecular dynamics simulations depict the rapid penetration of gluconamide in the lipopolysaccharide region of the bacterial outer membrane, corroborating the experimental findings. Thus, this novel outer membrane‐targeting platform provides a new strategy to reduce drug intake and, hence, minimize bacterial resistance.     

Copper Nanoparticles Grafted on a Silicon Wafer and Their Excellent Surface‐Enhanced Raman Scattering

Copper nanoparticles grafted on a silicon wafer are fabricated by reducing copper ions with silicon–hydrogen bonds and assembling them in situ on the Si wafer. The nanoparticles, with an average size of 20 nm, grow uniformly and densely on the Si wafer, and they are used as substrates for surface‐enhanced Raman scattering. These substrates exhibit excellent enhancement in the low concentration detection (1 × 10^?9 M ) of rhodamine 6G with an enhancement factor (EF) of 2.29 × 10⁷ and a relative standard deviation (RSD) of <20%. They are also employed to detect sudan‐I dye with distinguished sensitivity and uniformity. The results are interesting and significant because Cu substrates are otherwise thought to be poor. These effects might provide new ways to think about surface‐enhanced Raman scattering based on Cu substrates.     

Nano Spray‐Dried Block Copolymer Nanoparticles and Their Transformation into Hybrid and Inorganic Nanoparticles

A novel combination of block copolymer (BCP) nano spray‐drying (NSD), solvent annealing, and selective metal oxide growth is utilized to create functional polymer nanoparticles, polymer‐metal‐oxide hybrid nanoparticles, and templated metal oxide nanoparticles with tunable composition, internal morphology, and porosity. NSD of BCPs from chloroform and toluene solutions results in porous and nonporous nanoparticles, respectively, with various degrees of phase separation. Further tuning of the nanoparticle internal morphology is performed by solvent annealing the spray‐dried particles with judicious choice of the nonsolvent dispersion medium and the surfactant, yielding assembly of both blocks at the surface of the nanoparticles. Finally, ZnO and Al₂O₃ are grown inside the polar blocks of phase‐ordered nanoparticles using a sequential infiltration synthesis method, in a post‐assembly process, resulting in hybrid BCP‐ZnO particles and BCP‐templated Al₂O₃ nanoparticles, as demonstrated by scanning transmission electron microscopy tomography. These structure engineering methods open new ways to direct and template functional nanoparticles.     

Hierarchical Structuring in Block Copolymer Nanocomposites through Two Phase‐Separation Processes Operating on Different Time Scales

Tailoring the size and surface chemistry of nanoparticles allows one to control their position in a block copolymer, but this is usually limited to one‐dimensional distribution across domains. Here, the hierarchical assembly of poly(ethylene oxide)‐stabilized gold nanoparticles (Au‐PEO) into hexagonally packed clusters inside mesostructured ultrathin films of polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA) is described. A close examination of the structural evolution at different nanoparticle filling fractions and PEO ligand molecular weights suggests that the mechanism leading to this structure‐within‐structure is the existence of two phase separation processes operating on different time scales. The length of the PEO ligand is shown to influence not only the interparticle distances but also the phase separation processes. These conclusions are supported by novel mesoscopic simulations, which provide additional insight into the kinetic and thermodynamic factors that are responsible for this behavior.     

Compartmentalization within Self‐Assembled Metal–Organic Framework Nanoparticles for Tandem Reactions

Compartmentalization is an essential feature found in living cells to ensure multiple biological processes occur without being affected by undesired external influences. Here, compartmentalized systems are developed based on the self‐assembly of metal–organic framework (MOF) nanoparticles into multifunctional MOF capsules (MOF‐Cs). Such MOF‐Cs have the capability of controlling molecular transportation and protecting interior microenvironment, thus making tandem reaction along trajectories to desired products. First of all, MOF‐Cs present controlled molecular transportation derived from molecular sieving property of MOFs. Second, MOF‐Cs can protect the encapsulated cargoes from denaturation and maintain their catalytic activity. Third, MOF‐Cs can provide spatial segregation for incompatible species and facilitate communication between these compartments to perform tandem reactions. These compartmentalized structures offer new views in the transportation, microreactor, and biotechnology.     

Pegylated Composite Nanoparticles Containing Upconverting Phosphors and meso‐Tetraphenyl porphine (TPP) for Photodynamic Therapy

The utilization of upconverting nanophosphors (UCNP) for photodynamic therapy (PDT) has gained significant interests due to its ability to convert deep‐penetrating near‐infra red (NIR) light (i.e., 978 nm) to visible light. Previous attempts to co‐localize UCNPs with photosensitizers suffer from low photo­sensitizer loading and problems with nanoparticle aggregation. Here, the preparation of a novel composite nanoparticle formulation comprising 100 nm β?NaYF₄:Yb³⁺,Er³⁺ UCNPs, and meso‐tetraphenyl porphine (TPP) photo­sensitizer, stabilized by biocompatible poly(ethylene glycol‐block‐(dl )lactic acid) block copolymers (PEG‐b‐PLA) is presented. A photosensitizer loading of 10 wt% with respect to UCNP crystal was achieved via the Flash NanoPrecipitation (FNP) process. A sterically stabilizing PEG layer on the composite nanoparticle surface prevents nanoparticle aggregation and ensures nanoparticle stability in water, PBS buffer, and culture medium containing serum proteins, resulting in nanoparticle suitable for in vivo applications. Based on in vitro studies utilizing HeLa cervical cancer cell lines, the composite nanoparticles are shown to exhibit low dark toxicity and efficient cancer cell‐killing activity upon NIR excitation. Exposure with 134 W cm^?2 of 978 nm light for 45 min resulted in 75% HeLa cell death. This is the first quantification of the cell‐killing capabilities of the UCNP/TPP composite nanoparticles formulated for photodynamic therapy.     

Thermodynamic and Kinetic Tuning of Block Copolymer Based on Random Copolymerization for High‐Quality Sub‐6 nm Pattern Formation

The precisely controllable self‐assembly phenomenon of block copolymers (BCPs) has garnered much attention because it yields well‐defined periodic nanostructures with a periodicity of 5–50 nm. However, from both thermodynamic and kinetic viewpoints, it still remains a challenge to develop a BCP material that can provide sub‐10 nm resolution, high pattern quality, fast pattern formation, and sufficient etch selectivity. To address these challenges, this study reports a BCP system containing a random‐copolymerized block (poly(2‐vinylpyridine‐co‐4‐vinylpyridne)‐b‐poly(dimethylsiloxane) (P(2VP‐co‐4VP)‐b‐PDMS)) that can provide sub‐6 nm resolution, 3σ line edge roughness of 0.89 nm, sub‐1‐min assembly time, and a high etch selectivity over 10. Calculation of the Flory–Huggins interaction parameter (χ) based on Leibler's mean‐field theory and small‐angle X‐ray scattering measurement data confirms the gradual tunability of χ with the controlled addition of 4VP fraction in the P(2VP‐co‐4VP) block. While guaranteeing kinetically fast self‐assembly within one minute using microwave annealing, the best pattern quality resulting from the thermodynamic suppression of line edge fluctuation is achieved with a 4VP weight fraction of 33% in the random‐copolymerized block. This approach enables systematical control of sub‐6 nm scale BCP self‐assembly and will provide a practical patterning solution for diverse nanostructures and devices.     

High‐Mobility Naphthalene Diimide and Selenophene‐Vinylene‐Selenophene‐Based Conjugated Polymer: n‐Channel Organic Field‐Effect Transistors and Structure–Property Relationship

Interdependence of chemical structure, thin‐film morphology, and transport properties is a key, yet often elusive aspect characterizing the design and development of high‐mobility, solution‐processed polymers for large‐area and flexible electronics applications. There is a specific need to achieve >1 cm² V^?1 s^?1 field‐effect mobilities (μ) at low processing temperatures in combination with environmental stability, especially in the case of electron‐transporting polymers, which are still lagging behind hole transporting materials. Here, the synthesis of a naphthalene‐diimide based donor–acceptor copolymer characterized by a selenophene vinylene selenophene donor moiety is reported. Optimized field‐effect transistors show maximum μ of 2.4 cm² V^?1 s^?1 and promising ambient stability. A very marked film structural evolution is revealed with increasing annealing temperature, with evidence of a remarkable 3D crystallinity above 180 °C. Conversely, transport properties are found to be substantially optimized at 150 °C, with limited gain at higher temperature. This discrepancy is rationalized by the presence of a surface‐segregated prevalently edge‐on packed polymer phase, dominating the device accumulated channel. This study therefore serves the purpose of presenting a promising, high‐electron‐mobility copolymer that is processable at relatively low temperatures, and of clearly highlighting the necessity of specifically investigating channel morphology in assessing the structure–property nexus in semiconducting polymer thin films.     

Organic–Inorganic Hybrid Nanocomposites Prepared by Means of Sol–Gel Condensation of Bismethacrylatesilanes in Reactive Diluents

A bismethacrylatesilane monomer (BMS) was prepared via selective Michael addition of aminopropyltrimethoxysilane (APTMS) to the acrylate groups of 2‐methacryloyloxyethyl acrylate (ethyleneglycol acrylatemethacrylate, EGAMA). Sol–gel condensation of BMS in triethyleneglycoldimethacrylate (TGDMA) afforded in situ stable methacrylate‐functional nanoparticle dispersions, with average nanoparticle diameter of 3–4 nm, as determined by means of element‐specific transmission electron microscopy (TEM). Condensation in the absence of TGDMA could be achieved without gelation. Viscosities of the resulting nanoparticle dispersions were low, ranging from 12 to 1969 mPa s, shear‐rate‐independent and increased with the nanoparticle fraction, exhibiting hard‐sphere behavior. The nanoparticle dispersions in TGDMA were employed as matrix for the preparation of photocurable acrylic nanocomposites. Mechanical properties such as compressive and flexural strength as well as Young’s moduli (6000 to 8700 MPa) have been determined. Low volume shrinkage was observed upon polymerization. The volume shrinkage depended on the nanofiller fraction.     

Lanthanide–Organic Framework Nanothermometers Prepared by Spray‐Drying

Accurate, noninvasive, and self‐referenced temperature measurements at the submicrometer scale are of great interest, prompted by the ever‐growing demands in the fields of nanotechnology and nanomedicine. The thermal dependence of the phosphor's luminescence provides high detection sensitivity and spatial resolution with short acquisition times in, e.g., biological fluids, strong electromagnetic fields, and fast‐moving objects. Here, it is shown that nanoparticles of [(Tb_0.914Eu_0.086)₂(PDA)₃(H₂O)]·2H₂O (PDA = 1,4‐phenylenediacetic acid), the first lanthanide–organic framework prepared by the spray‐drying method, are excellent nanothermometers operating in the solid state in the 10–325 K range (quantum yield of 0.25 at 370 nm, at room temperature). Intriguingly, this system is the most sensitive cryogenic nanothermometer reported so far, combining high sensitivity (up to 5.96 ± 0.04% K^?1 at 25 K), reproducibility (in excess of 99%), and low‐temperature uncertainty (0.02 K at 25 K).     

Optimization of Solubility,Film Morphology and Photodetector Performance by Molecular Side‐Chain Engineering of Low‐Bandgap Thienothiadiazole‐Based Polymers

A series of donor–acceptor (D‐A) type low‐bandgap polymers containing the terthiophene and thieno[3,4‐b]thiadiazole units in the main chain but different numbers of identical side chains are designed and synthesized in order to study the effect of side chain on the polymer properties and optimize the performance of polymer photodetectors. Variation in the side chain content can influence the polymer solubility, molecular packing, and film morphology, which in turn affects the photodetector performance, particularly with regard to the photoresponsivity and dark current. X‐ray diffraction patterns indicate that molecular ordering increases with more side chains. Atomic force microscopy shows that appropriate morphology of the active layer in the polymer photodetector is necessary for high photocurrent and low dark current. Using BCP as a hole blocking layer (10 nm), the photodetector based on P4 exhibits the optimized performance with specific detectivity of 1.4 × 10¹² Jones at 800 nm, which is among the best reported values for polymer photodetectors and even comparable to that of a silicon photodetector.     

Highly Photoluminescent and Environmentally Stable Perovskite Nanocrystals Templated in Thin Self‐Assembled Block Copolymer Films

Ordered nanostructured crystals of thin organic–inorganic metal halide perovskites (OIHPs) are of great interest to researchers because of the dimensional‐dependence of their photoelectronic properties for developing OIHPs with novel properties. Top‐down routes such as nanoimprinting and electron beam lithography are extensively used for nanopatterning OIHPs, while bottom‐up approaches are seldom used. Herein, developed is a simple and robust route, involving the controlled crystallization of the OIHPs templated with a self‐assembled block copolymer (BCP), for fabricating nanopatterned OIHP films with various shapes and nanodomain sizes. When the precursor solution consisting of methylammonium lead halide (MAPbX₃, X = Br^?, I^?) perovskite and poly(styrene)‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) is spin‐coated on the substrate, a nanostructured BCP is developed by microphase separation. Spontaneous crystallization of the precursor ions preferentially coordinated with the P2VP domains yields ordered nanocrystals with various nanostructures (cylinders, lamellae, and cylindrical mesh) with controlled domain size (≈40–72 nm). The nanopatterned OIHPs show significantly enhanced photoluminescence (PL) with high resistance to both humidity and heat due to geometrically confining OIHPs in and passivation with the P2VP chains. The self‐assembled OIHP films with high PL performance provide a facile control of color coordinates by color conversion layers in blue‐emitting devices for cool‐white emission.     

Dual Stimuli‐Responsive Supramolecular Polypeptide‐Based Hydrogel and Reverse Micellar Hydrogel Mediated by Host–Guest Chemistry

Versatile strategies are currently being discovered for the fabrication of synthetic polypeptide‐based hybrid hydrogels, which have potential applications in polymer therapeutics and regenerative medicine. Herein, a new concept—the reverse micellar hydrogel—is introduced, and a versatile strategy is provided for fabricating supramolecular polypeptide‐based normal micellar hydrogel and reverse micellar hydrogels from the same polypeptide‐based copolymer via the cooperation of host–guest chemistry and hydrogen‐bonding interactions. The supramolecular hydrogels are thoroughly characterized, and a mechanism for their self‐assembly is proposed. These hydrogels can respond to dual stimuli—temperature and pH—and their mechanical and controlled drug‐release properties can be tuned by the copolymer topology and the polypeptide composition. The reverse micellar hydrogel can load 10% of the anticancer drug doxorubicin hydrochloride (DOX) and sustain DOX release for 45 days, indicating that it could be useful as an injectable drug delivery system.     

Interaction of Zoospores of the Green Alga Ulva with Bioinspired Micro‐ and Nanostructured Surfaces Prepared by Polyelectrolyte Layer‐by‐Layer Self‐Assembly

The interaction of spores of Ulva with bioinspired structured surfaces in the nanometer–micrometer size range is investigated using a series of coatings with systematically varying morphology and chemistry, which allows separation of the contributions of morphology and surface chemistry to settlement (attachment) and adhesion strength. Structured surfaces are prepared by layer‐by‐layer spray‐coating deposition of polyelectrolytes. By changing the pH during application of oppositely charged poly(acrylic acid) and polyethylenimine polyelectrolytes, the surface structures are systematically varied, which allows the influence of morphology on the biological response to be determined. In order to discriminate morphological from chemical effects, surfaces are chemically modified with poly(ethylene glycol) and tridecafluoroctyltriethoxysilane. This chemical modification changes the water contact angles while the influence of the morphology is retained. The lowest level of settlement is observed for structures of the order 2 µm. All surfaces are characterized with respect to their wettability, chemical composition, and morphological properties by contact angle measurement, X‐ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy.     

Highly Surface‐Wrinkled and N‐Doped CNTs Anchored on Metal Wire: A Novel Fiber‐Shaped Cathode toward High‐Performance Flexible Li–CO2 Batteries

Li–CO₂ batteries are regarded as a promising candidate for the next‐generation high‐performance electrochemical energy storage system owing to their ultrahigh theoretical energy density and environmentally friendly CO₂ fixation ability. Until now, the majority of reported catalysts for Li–CO₂ batteries are in the powder state. Thus, the air electrodes are produced in 2D rigid bulk structure and their electrochemical properties are negatively influenced by binder. The nondeformable feature and unsatisfactory performance of the cathode have already become the main obstacles that hinder Li–CO₂ batteries toward ubiquity for wearable electronics. In this work, for the first time, a flexible hybrid fiber is reported comprising highly surface‐wrinkled and N‐doped carbon nanotube (CNT) networks anchored on metal wire as the cathode integrated with high performance and high flexibility for fiber‐shaped Li–CO₂ battery. It exhibits a large discharge capacity as high as 9292.3 mAh g^?1, an improved cycling performance of 45 cycles, and a decent rate capability. A quasi‐solid‐state flexible fiber‐shaped Li–CO₂ battery is constructed to illustrate the advantages on mechanical flexibility of this fiber‐shaped cathode. Experiments and theoretical simulations prove that those doped pyridinic nitrogen atoms play a critical role in facilitating the kinetics of CO₂ reduction and evolution reaction, thereby enabling distinctly enhanced electrochemical performance.     

High‐Performance Sodium‐Ion Hybrid Supercapacitor Based on Nb2O5@Carbon Core–Shell Nanoparticles and Reduced Graphene Oxide Nanocomposites

Sodium‐ion hybrid supercapacitors (Na‐HSCs) have potential for mid‐ to large‐scale energy storage applications because of their high energy/power densities, long cycle life, and the low cost of sodium. However, one of the obstacles to developing Na‐HSCs is the imbalance of kinetics from different charge storage mechanisms between the sluggish faradaic anode and the rapid non‐faradaic capacitive cathode. Thus, to develop high‐power Na‐HSC anode materials, this paper presents the facile synthesis of nanocomposites comprising Nb₂O₅@Carbon core–shell nanoparticles (Nb₂O₅@C NPs) and reduced graphene oxide (rGO), and an analysis of their electrochemical performance with respect to various weight ratios of Nb₂O₅@C NPs to rGO (e.g., Nb₂O₅@C, Nb₂O₅@C/rGO‐70, ‐50, and ‐30). In a Na half‐cell configuration, the Nb₂O₅@C/rGO‐50 shows highly reversible capacity of ≈285 mA h g^?1 at 0.025 A g^?1 in the potential range of 0.01–3.0 V (vs Na/Na⁺). In addition, the Na‐HSC using the Nb₂O₅@C/rGO‐50 anode and activated carbon (MSP‐20) cathode delivers high energy/power densities (≈76 W h kg^?1 and ≈20 800 W kg^?1) with a stable cycle life in the potential range of 1.0–4.3 V. The energy and power densities of the Na‐HSC developed in this study are higher than those of similar Li‐ and Na‐HSCs previously reported.