Graphitic Nanocarbon with Engineered Defects for High‐Performance Potassium‐Ion Battery Anodes

The application of graphite anodes in potassium‐ion batteries (KIB) is limited by the large variation in lattice volume and the low diffusion coefficient of potassium ions during (de)potassiation. This study demonstrates nitrogen‐doped, defect‐rich graphitic nanocarbons (GNCs) as high‐performance KIB anodes. The GNCs with controllable defect densities are synthesized by annealing an ethylenediaminetetraacetic acid nickel coordination compound. The GNCs show better performance than the previously reported thin‐walled graphitic carbonaceous materials such as carbon nanocages and nanotubes. In particular, the GNC prepared at 600 °C shows a stabilized capacity of 280 mAh g^?1 at 50 mA g^?1, robust rate capability, and long cycling life due to its high‐nitrogen‐doping, short‐range‐ordered, defect‐rich graphitic structure. A high capacity of 189 mAh g^?1 with a long cycle life over 200 cycles is demonstrated at a current density of 200 mA g^?1. Further, it is confirmed that the potassium ion storage mechanism of GNCs is different from that of graphite using multiple characterization methods. Specifically, the GNCs with numerous defects provide more active sites for the potassiation process, which results in a final discharge product with short‐range order. This study opens a new pathway for designing graphitic carbonaceous materials for KIB anodes.     

Oxygen/Fluorine Dual‐Doped Porous Carbon Nanopolyhedra Enabled Ultrafast and Highly Stable Potassium Storage

Carbon‐based materials are promising anodes for potassium‐ion batteries (PIBs). However, due to the significant volume expansion and structural instability, it is still a challenge to achieve a high capacity, high rate and long cycle life for carbonaceous anodes. Herein, oxygen/fluorine dual‐doped porous carbon nanopolyhedra (OFPCN) is reported for the first time as a novel anode for PIBs, which exhibits a high reversible capacity of 481 mA h g^?1 at 0.05 A g^?1 and excellent performance of 218 mA h g^?1 after 2000 cycles at 1 A g^?1 with 92% capacity retention. Even after 5000 robust cycles at 10 A g^?1 with charging/discharging time of around 40 s, an unprecedented capacity of 111 mA h g^?1 is still maintained. Such ultrafast potassium storage and unprecedented cycling stability have been seldom reported in PIBs. Quantitative kinetics analysis reveals that both diffusion and capacitance processes are involved in the potassium storage mechanism. Density functional theory calculations demonstrate that the O/F dual‐doped porous carbon promotes the K‐adsorption ability and can absorb multiple K atoms with slight structural distortion, which accounts for the high specific capacity, outstanding rate capability, and excellent cycling stability of the OFPCN anode.     

Toward High‐Performance Capacitive Potassium‐Ion Storage: A Superior Anode Material from Silicon Carbide‐Derived Carbon with a Well‐Developed Pore Structure

Potassium‐ion battery (PIB) using a carbon‐based anode is an ideal device for electrochemical energy storage. However, the large atomic size of potassium ions inevitably leads to huge volume expansion and the collapse of anodes, resulting in the severe capacity fading during the long‐term cycling. Herein, silicon carbide‐derived carbon (SiC‐CDC) with a controllable pore structure is synthesized with a concise etching approach. It exhibits a maximum capacity of 284.8 mA h g^?1 at a current density of 0.1 A g^?1 after 200 cycles as well as a highly reversible capacity of 197.3 mA h g^?1 at a current density of 1.0 A g^?1 even after 1000 cycles. A mixed mechanism of the potassium storage is proposed for this prominent performance. The interconnected pore structure with a high proportion of mesopore volume provides abundant active sites for the adsorption of potassium ions, a shortened electrolyte penetration path, and enlarged accumulation space for potassium ions, eventually leading to facilitated capacitive potassium storage inside this SiC‐CDC electrode. This work provides fundamental theories of designing pore structures for boosting capacitive potassium storage and unveils CDC‐based materials as the prospective anodes for high‐performance PIBs.     

Temperature‐Mediated Engineering of Graphdiyne Framework Enabling High‐Performance Potassium Storage

Graphdiyne (GDY), an emerging type of carbon allotropes, possesses fascinating electrical, chemical, and mechanical properties to readily spark energy applications in the realm of Li‐ion and Na‐ion batteries. Nevertheless, rational design of GDY architectures targeting advanced K‐ion storage has rarely been reported to date. Herein, the first example of synthesizing GDY frameworks in a scalable fashion to realize superb potassium storage for high‐performance K‐ion battery (KIB) anodes is showcased. To begin with, first principles calculations provide theoretical guidances for analyzing the intrinsic potassium storage capability of GDY. Meanwhile, the specific capacity is predicted to be as high as 620 mAh g^?1, which is considerably augmented as compared with graphite (278 mAh g^?1). Experimental tests then reveal that prepared GDY framework indeed harvests excellent electrochemical performance as a KIB anode, achieving high specific capacity (≈505 mAh g^?1 at 50 mA g^?1), outstanding rate performance (150 mAh g^?1 at 5000 mA g^?1) and favorable cycling stability (a high capacity retention of over 90% after 2000 cycles at 1000 mA g^?1). Furthermore, kinetic analysis reveals that capacitive effect mainly accounts for the K‐ion storage, with operando Raman spectroscopy/ex situ X‐ray photoelectron spectroscopy identifying good electrochemical reversibility of GDY.     

Hard–Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance

A series of hard–soft carbon composite materials is produced from biomass and oil waste and applied as low‐cost anodes for sodium‐ion batteries to study the fundamentals behind the dependence of Na storage on their structural features. A good reversible capacity of 282 mAh g^?1 is obtained at a current density of 30 mA g^?1 with a high initial Coulombic efficiency of 80% at a carbonization temperature of only 1000 °C by adjusting the ratio of hard to soft carbon. The performance is superior to the pure hard or soft carbon anodes produced at the same temperatures. This synergy between hard and soft carbon resulting in an excellent performance is due to the blockage of some open pores in hard carbon by the soft carbon, which suppresses the solid electrolyte interface formation and increases the reversible sodium storage capacity.     

Walnut‐Like Multicore–Shell MnO Encapsulated Nitrogen‐Rich Carbon Nanocapsules as Anode Material for Long‐Cycling and Soft‐Packed Lithium‐Ion Batteries

Metal oxide‐based nanomaterials are widely studied because of their high‐energy densities as anode materials in lithium‐ion batteries. However, the fast capacity degradation resulting from the large volume expansion upon lithiation hinders their practical application. In this work, the preparation of walnut‐like multicore–shell MnO encapsulated nitrogen‐rich carbon nanocapsules (MnO@NC) is reported via a facile and eco‐friendly process for long‐cycling Li‐ion batteries. In this hybrid structure, MnO nanoparticles are uniformly dispersed inside carbon nanoshells, which can simultaneously act as a conductive framework and also a protective buffer layer to restrain the volume variation. The MnO@NC nanocapsules show remarkable electrochemical performances for lithium‐ion batteries, exhibiting high reversible capability (762 mAh g^?1 at 100 mA g^?1) and stable cycling life (624 mAh g^?1 after 1000 cycles at 1000 mA g^?1). In addition, the soft‐packed full batteries based on MnO@NC nanocapsules anodes and commercial LiFePO₄ cathodes present good flexibility and cycling stability.     

Few‐Layered SnS2 on Few‐Layered Reduced Graphene Oxide as Na‐Ion Battery Anode with Ultralong Cycle Life and Superior Rate Capability

Na‐ion Batteries have been considered as promising alternatives to Li‐ion batteries due to the natural abundance of sodium resources. Searching for high‐performance anode materials currently becomes a hot topic and also a great challenge for developing Na‐ion batteries. In this work, a novel hybrid anode is synthesized consisting of ultrafine, few‐layered SnS₂ anchored on few‐layered reduced graphene oxide (rGO) by a facile solvothermal route. The SnS₂/rGO hybrid exhibits a high capacity, ultralong cycle life, and superior rate capability. The hybrid can deliver a high charge capacity of 649 mAh g^?1 at 100 mA g^?1. At 800 mA g^?1 (1.8 C), it can yield an initial charge capacity of 469 mAh g^?1, which can be maintained at 89% and 61%, respectively, after 400 and 1000 cycles. The hybrid can also sustain a current density up to 12.8 A g^?1 (≈28 C) where the charge process can be completed in only 1.3 min while still delivering a charge capacity of 337 mAh g^?1. The fast and stable Na‐storage ability of SnS₂/rGO makes it a promising anode for Na‐ion batteries.     

A General Metal‐Organic Framework (MOF)‐Derived Selenidation Strategy for In Situ Carbon‐Encapsulated Metal Selenides as High‐Rate Anodes for Na‐Ion Batteries

On account of increasing demand for energy storage devices, sodium‐ion batteries (SIBs) with abundant reserve, low cost, and similar electrochemical properties have the potential to partly replace the commercial lithium‐ion batteries. In this study, a facile metal‐organic framework (MOF)‐derived selenidation strategy to synthesize in situ carbon‐encapsulated selenides as superior anode for SIBs is rationally designed. These selenides with particular micro‐ and nanostructured features deliver ultrastable cycling performance at high charge–discharge rate and demonstrate ultraexcellent rate capability. For example, the uniform peapod‐like Fe₇Se₈@C nanorods represent a high specific capacity of 218 mAh g^?1 after 500 cycles at 3 A g^?1 and the porous NiSe@C spheres display a high specific capacity of 160 mAh g^?1 after 2000 cycles at 3 A g^?1. The current simple MOF‐derived method could be a promising strategy for boosting the development of new functional inorganic materials for energy storage, catalysis, and sensors.     

Toward High Performance Thiophene‐Containing Conjugated Microporous Polymer Anodes for Lithium‐Ion Batteries through Structure Design

Poly(thiophene) as a kind of n‐doped conjugated polymer with reversible redox behavior can be employed as anode material for lithium‐ion batteries (LIBs). However, the low redox activity and poor rate performance for the poly(thiophene)‐based anodes limit its further development. Herein, a structure‐design strategy is reported for thiophene‐containing conjugated microporous polymers (CMPs) with extraordinary electrochemical performance as anode materials in LIBs. The comparative study on the electrochemical performance of the structure‐designed thiophene‐containing CMPs reveals that high redox‐active thiophene content, highly crosslinked porous structure, and improved surface area play significant roles for enhancing electrochemical performances of the resulting CMPs. The all‐thiophene‐based polymer of poly(3,3′‐bithiophene) with crosslinked structure and a high surface area of 696 m² g^?1 exhibits a discharge capacity of as high as 1215 mAh g^?1 at 45 mA g^?1, excellent rate capability, and outstanding cycling stability with a capacity retention of 663 mAh g^?1 at 500 mA g^?1 after 1000 cycles. The structure–performance relationships revealed in this work offer a fundamental understanding in the rational design of CMPs anode materials for high performance LIBs.     

Making Ultrafast High‐Capacity Anodes for Lithium‐Ion Batteries via Antimony Doping of Nanosized Tin Oxide/Graphene Composites

Tin oxide‐based materials attract increasing attention as anodes in lithium‐ion batteries due to their high theoretical capacity, low cost, and high abundance. Composites of such materials with a carbonaceous matrix such as graphene are particularly promising, as they can overcome the limitations of the individual materials. The fabrication of antimony‐doped tin oxide (ATO)/graphene hybrid nanocomposites is described with high reversible capacity and superior rate performance using a microwave assisted in situ synthesis in tert‐butyl alcohol. This reaction enables the growth of ultrasmall ATO nanoparticles with sizes below 3 nm on the surface of graphene, providing a composite anode material with a high electric conductivity and high structural stability. Antimony doping results in greatly increased lithium insertion rates of this conversion‐type anode and an improved cycling stability, presumably due to the increased electrical conductivity. The uniform composites feature gravimetric capacity of 1226 mAh g^?1 at the charging rate 1C and still a high capacity of 577 mAh g^?1 at very high charging rates of up to 60C, as compared to 93 mAh g^?1 at 60C for the undoped composite synthesized in a similar way. At the same time, the antimony‐doped anodes demonstrate excellent stability with a capacity retention of 77% after 1000 cycles.     

Ultrasmall Sn Nanoparticles Embedded in Carbon as High‐Performance Anode for Sodium‐Ion Batteries

Designed as a high‐capacity, high‐rate, and long‐cycle life anode for sodium‐ion batteries, ultrasmall Sn nanoparticles (≈8 nm) homogeneously embedded in spherical carbon network (denoted as 8‐Sn@C) is prepared using an aerosol spray pyrolysis method. Instrumental analyses show that 8‐Sn@C nanocomposite with 46 wt% Sn and a BET surface area of 150.43 m² g^?1 delivers an initial reversible capacity of ≈493.6 mA h g^?1 at the current density of 200 mA g^?1, a high‐rate capacity of 349 mA h g^?1 even at 4000 mA g^?1, and a stable capacity of ≈415 mA h g^?1 after 500 cycles at 1000 mA g^?1. The remarkable electrochemical performance of 8‐Sn@C is owing to the synergetic effects between the well‐dispersed ultrasmall Sn nanoparticles and the conductive carbon network. This unique structure of very‐fine Sn nanoparticles embedded in the porous carbon network can effectively suppress the volume fluctuation and particle aggregation of tin during prolonged sodiation/desodiation process, thus solving the major problems of pulverization, loss of electrical contact and low utilization rate facing Sn anode.     

Ultrathin Layered Hydroxide Cobalt Acetate Nanoplates Face‐to‐Face Anchored to Graphene Nanosheets for High‐Efficiency Lithium Storage

The dramatically increasing demand of high‐energy lithium‐ion batteries (LIBs) urgently requires advanced substitution for graphite‐based anodes. Herein, inspired from the extra capacity of lithium storage in solid‐electrolyte interface (SEI) films, layered hydroxide cobalt acetates (LHCA, Co(Ac)_0.48(OH)_1.52·0.55H₂O) are introduced as novel and high‐efficiency anode materials. Furthermore, ultrathin LHCA nanoplates are face‐to‐face anchored on the surface of graphene nanosheets (GNS) through a facile solvothermal method to improve the electronic transport and avoid agglomeration during repeated cycles. Profiting from the parallel structure, LHCA//GNS nanosheets exhibit extraordinary long‐term and high‐rate performance. At the current densities of 1000 and 4000 mA g^?1, the reversible capacities maintain ≈1050 mAh g^?1 after 200 cycles and ≈780 mAh g^?1 after 300 cycles, respectively, much higher than the theoretical value of LHCA according to the conversion mechanism. Fourier transform infrared spectroscopy confirms the conversion from acetate to acetaldehyde after lithiation. A reasonable mechanism is proposed to elucidate the lithium storage behaviors referring to the electrocatalytic conversion of OH groups with Co nanocatalysts. This work can help further understand the contribution of SEI components (especially LiOH and LiAc) to lithium storage. It is envisaged that layered transition metal hydroxides can be used as advanced materials for energy storage devices.     

Ultrathin MoS2 Nanosheets@Metal Organic Framework‐Derived N‐Doped Carbon Nanowall Arrays as Sodium Ion Battery Anode with Superior Cycling Life and Rate Capability

This study reports the design and fabrication of ultrathin MoS₂ nanosheets@metal organic framework‐derived N‐doped carbon nanowall array hybrids on flexible carbon cloth (CC@CN@MoS₂) as a free‐standing anode for high‐performance sodium ion batteries. When evaluated as an anode for sodium ion battery, the as‐fabricated CC@CN@MoS₂ electrode exhibits a high capacity (653.9 mA h g^?1 of the second cycle and 619.2 mA h g^?1 after 100 cycles at 200 mA g^?1), excellent rate capability, and long cycling life stability (265 mA h g^?1 at 1 A g^?1 after 1000 cycles). The excellent electrochemical performance can be attributed to the unique 2D hybrid structures, in which the ultrathin MoS₂ nanosheets with expanded interlayers can provide shortened ion diffusion paths and favorable Na⁺ insertion/extraction space, and the porous N‐doped carbon nanowall arrays on flexible carbon cloth are able to improve the conductivity and maintain the structural integrity. Moreover, the N‐doping‐induced defects also make them favorable for the effective storage of sodium ions, which enables the enhanced capacity and rate performance of MoS₂.     

Few‐Layer MoSe2 Nanosheets with Expanded (002) Planes Confined in Hollow Carbon Nanospheres for Ultrahigh‐Performance Na‐Ion Batteries

Sodium‐ion batteries (SIBs) are considered as a promising alternative to lithium‐ion batteries, due to the abundant reserves and low price of Na sources. To date, the development of anode materials for SIBs is still confronted with many serious problems. In this work, encapsulation‐type structured MoSe₂@hollow carbon nanosphere (HCNS) materials assembled with expanded (002) planes few‐layer MoSe₂ nanosheets confined in HCNS are successfully synthesized through a facile strategy. Notably, the interlayer spacing of the (002) planes is expanded to 1.02 nm, which is larger than the intrinsic value of pristine MoSe₂ (0.64 nm). Furthermore, the few‐layer nanosheets are space‐confined in the inner cavity of the HCNS, forming hybrid MoSe₂@HCNS structures. When evaluated as anode materials for SIBs, it shows excellent rate capabilities, ultralong cycling life with exceptional Coulombic efficiency even at high current density, maintaining 501 and 471 mA h g^?1 over 1000 cycles at 1 and 3 A g^?1, respectively. Even when cycled at current densities as high as 10 A g^?1, a capacity retention of 382 mA h g^?1 can be achieved. The expanded (002) planes, 2D few‐layer nanosheets, and unique carbon shell structure are responsible for the ultralong cycling and high rate performance.     

Carbon Nanotubes Rooted in Porous Ternary Metal Sulfide@N/S‐Doped Carbon Dodecahedron: Bimetal‐Organic‐Frameworks Derivation and Electrochemical Application for High‐Capacity and Long‐Life Lithium‐Ion Batteries

Lithium ion battery is the predominant power source for portable electronic devices, electrical vehicles, and back‐up electricity storage units for clean and renewable energies. High‐capacity and long‐life electrode materials are essential for the next‐generation Li‐ion battery with high energy density. Here bimetal‐organic‐frameworks synthesis of Co_0.4Zn_0.19S@N and S codoped carbon dodecahedron is shown with rooted carbon nanotubes (Co‐Zn‐S@N‐S‐C‐CNT) for high‐performance Li‐ion battery application. Benefiting from the synergetic effect of two metal sulfide species for Li‐storage at different voltages, mesoporous dodecahedron structure, N and S codoped carbon overlayer and deep‐rooted CNTs network, the product exhibits a larger‐than‐theoretical reversible Li‐storage capacity of 941 mAh g^?1 after 250 cycles at 100 mA g^?1 and excellent high‐rate capability (734, 591, 505 mAh g^?1 after 500 cycles at large current densities of 1, 2, and 5 A g^?1 , respectively).     

Face‐to‐Face Contact and Open‐Void Coinvolved Si/C Nanohybrids Lithium‐Ion Battery Anodes with Extremely Long Cycle Life

To develop high‐performance anode materials of lithium‐ion batteries (LIBs) instead of commercial graphite for practical applications, herein, a layer of silicon has been well‐anchored onto a 3D graphene/carbon nanotube (CNT) aerogels (CAs) framework with face‐to‐face contact and balanced open void by a simple chemical vapor deposition strategy. The engineered contact interface between CAs and Si creates high‐efficiency channels for the rapid electrons and lithium ions transport, and meanwhile, the balanced open‐void allows the free expansion of Si during cycling while maintaining high structural integrity due to the robust mechanical strength of 3D CAs framework. As a consequence, the as‐synthesized Si/CAs nanohybrids are highly stable anode materials for LIBs with a high reversible discharge capacity (1498 mAh g^?1 at 200 mA g^?1) and excellent rate capability (462 mAh g^?1 at 10 000 mA g^?1), which is much better than Si/graphene‐CNTs‐mixture (51 mAh g^?1 at 10 000 mA g^?1). More significantly, it is found that the Si/CAs nanohybrids display no obvious capacity decline even after 2000 cycles at a high current density of 10 000 mA g^?1. The present Si/CAs nanohybrids are one of the most stable Si‐based anode materials ever reported for LIBs to date.     

A Robust Ion‐Conductive Biopolymer as a Binder for Si Anodes of Lithium‐Ion Batteries

Binders have been reported to play a key role in improving the cycle performance of Si anode materials of lithium‐ion batteries. In this study, the biopolymer guar gum (GG) is applied as the binder for a silicon nano­particle (SiNP) anode of a lithium‐ion battery for the first time. Due to the large number of polar hydroxyl groups in the GG molecule, a robust interaction between the GG binder and the SiNPs is achieved, resulting in a stable Si anode during cycling. More specifically, the GG binder can effectively transfer lithium ions to the Si surface, similarly to polyethylene oxide solid electrolytes. When GG is used as a binder, the SiNP anode can deliver an initial discharge capacity as high as 3364 mAh g^?1, with a Coulombic efficiency of 88.3% at the current density of 2100 mA g^?1, and maintain a capacity of 1561 mAh g^?1 after 300 cycles. The study shows that the electrochemical performance of the SiNP anode with GG binder is significantly improved compared to that of a SiNP anode with a sodium alginate binder, and it demonstrates that GG is a promising binder for Si anodes of lithium‐ion batteries.     

Bamboo‐Like Hollow Tubes with MoS2/N‐Doped‐C Interfaces Boost Potassium‐Ion Storage

Potassium‐ion batteries (KIBs) are new‐concept of low‐cost secondary batteries, but the sluggish kinetics and huge volume expansion during cycling, both rooted in the size of large K ions, lead to poor electrochemical behavior. Here, a bamboo‐like MoS₂/N‐doped‐C hollow tubes are presented with an expanded interlayer distance of 10 Å as a high‐capacity and stable anode material for KIBs. The bamboo‐like structure provides gaps along axial direction in addition to inner cylinder hollow space to mitigate the strains in both radial and vertical directions that ultimately leads to a high structural integrity for stable long‐term cycling. Apart from being a constituent of the interstratified structure the N‐doped‐C layers weave a cage to hold the potassiation products (polysulfide and the Mo nanoparticles) together, thereby effectively hindering the continuing growth of solid electrolyte interphase in the interior of particles. The density functional theory calculations prove that the MoS₂/N‐doped‐C atomic interface can provide an additional attraction toward potassium ion. As a result, it delivers a high capacity at a low current density (330 mAh g^?1 at 50 mA g^?1 after 50 cycles) and a high‐capacity retention at a high current density (151 mAh g^?1 at 500 mA g^?1 after 1000 cycles).     

Hard Macrocellular Silica Si(HIPE) Foams Templating Micro/Macroporous Carbonaceous Monoliths: Applications as Lithium Ion Battery Negative Electrodes and Electrochemical Capacitors

By using Si(HIPEs) as hard, exotemplating matrices, interconnected macro‐/microporous carbon monolith‐type materials with a surface area of around 600 m² g^?1 are synthesized and shaped. The carbonaceous foams exhibit a conductivity of 20 S cm^?1, addressed with excellent mechanical properties (Young's modulus of 0.2 GPa and toughness of 13 J g^?1, when the carbon core is optimized). The above‐mentioned specificities, combined with the fact that the external shape and size can be easily designed on demand, are of primary importance for applications. The functionality of these carbonaceous monoliths is tested as both an electrochemical capacitor and a lithium ion negative electrode. The electrochemical capacitors' voltage–current profiles exhibit a non‐ideal rectangular response, confirming the double‐layer behavior of the carbon studied, while the charge‐discharge current profile of the electric double‐layer capacitor is directly proportional to the scan where the current response during charge and discharge exhibits high reversibility. When acting as a lithium ion negative electrode, after initial irreversibility, a good cyclability is obtained, associated with a stable capacity of 200 mA h g^?1 during the first 50 cycles at a reasonable current density (C/10).     

An Ultrastable Nonaqueous Potassium‐Ion Hybrid Capacitor

Potassium‐ion hybrid capacitors (PIHCs) show great potential in large‐scale energy storage due to the advantages of electrochemical capacitors and potassium‐ion batteries. However, their development remains at the preliminary stage and is mainly limited by the kinetic imbalance between the two electrodes. Herein, an architecture of NbSe₂ nanosheets embedded in N, Se co‐doped carbon nanofibers (NbSe₂/NSeCNFs) as flexible, free‐standing, and binder‐free anodes for PIHCs is reported. The NbSe₂/NSeCNFs with hierarchically porous structure and N, Se co‐doping afford highly efficient channels for fast transportation of potassium ions and electrons during repeated cycling process. Furthermore, excellent electrochemical reversibility of the NbSe₂/NSeCNFs electrode is demonstrated through in situ XRD, in situ Raman, ex situ transmission electron microscopy and element mapping. Thus, PIHCs with the NbSe₂/NSeCNFs anode and active carbon cathode achieve a high energy of 145 W h kg^?1 at a current density of 50 mA g^?1, as well as an ultra‐long cycle life of over 10 000 cycles at a high current density of 2 A g^?1. These results indicate that the assembled PIHCs display great potential for applications in the field of ultra‐long cycling energy storage devices.