Synthesis of 2H‐1T′ WS2‐ReS2 Heterophase Structures with Atomically Sharp Interface via Hydrogen‐Triggered One‐Pot Growth

2D transition metal chalcogenides (TMDs) with different compositions, phase structures, and properties offer giant opportunities for building novel 2D lateral heterostructures. However, the studies to date have been largely limited to homophase TMD heterostructures, while the construction of heterophase TMD heterostructures remains a challenge. Herein, the synthesis of 2H‐1T′ WS₂‐ReS₂ heterophase junctions with high‐quality interface structure via a hydrogen‐triggered one‐pot growth approach is reported. Sequential introduction of hydrogen during growth system, which acts as a “switch” to selectively turn off the growth of ReS₂ while turning on the growth of WS₂, allows WS₂ to seamlessly grow around ReS₂ to form the WS₂‐ReS₂ heterojunction. Moreover, WS₂ prefers to nucleate at the vertices of ReS₂ grain with fixed lattice orientation, which makes the surrounding WS₂ grains merge into single crystal. Scanning transmission electron microscopy reveals high crystal quality of the heterojunction with an atomically sharp 2H‐1T′ heterophase interface. Transient absorption spectroscopy indicates that the photocarriers can effectively separate at the heterophase interface. Based on the high quality heterophase junction, prominent rectification characteristics and polarization‐dependent photodiode properties are achieved. This study provides a robust way for the controlled synthesis of 2D heterophase structures, which is essential for their fundamental studies and device applications.     

Optoelectronics based on 2D TMDs and heterostructures

2D materials including graphene and TMDs have proven interesting physical properties and promising optoelectronic applications. We reviewed the growth, characterization and optoelectronics based on 2D TMDs and their heterostructures, and demonstrated their unique and high quality of performances. For example, we observed the large mobility, fast response and high photo-responsivity in MoS₂, WS₂ and WSe₂ phototransistors, as well as the novel performances in vdW heterostructures such as the strong interlayer coupling, am-bipolar and rectifying behaviour, and the obvious photovoltaic effect. It is being possible that 2D family materials could play an increasingly important role in the future nano- and opto-electronics, more even than traditional semiconductors such as silicon.     

Self‐Aligned and Scalable Growth of Monolayer WSe2–MoS2 Lateral Heterojunctions

2D layered heterostructures have attracted intensive interests due to their unique optical, transport, and interfacial properties. The laterally stitched heterojunction based on dissimilar 2D transition metal dichalcogenides forms an intrinsic p–n junction without the necessity of applying an external voltage. However, no scalable processes are reported to construct the devices with such lateral heterostructures. Here, a scalable strategy, two‐step and location‐selective chemical vapor deposition, is reported to synthesize self‐aligned WSe₂–MoS₂ monolayer lateral heterojunction arrays and demonstrates their light‐emitting devices. The proposed fabrication process enables the growth of high‐quality interfaces and the first successful observation of electroluminescence at the WSe₂–MoS₂ lateral heterojunction. The electroluminescence study has confirmed the type‐I alignment at the interface rather than commonly believed type‐II alignment. This self‐aligned growth process paves the way for constructing various 2D lateral heterostructures in a scalable manner, practically important for integrated 2D circuit applications.     

Interlayer Coupling Induced Infrared Response in WS2/MoS2 Heterostructures Enhanced by Surface Plasmon Resonance

Infrared light detection is generally limited by the intrinsic bandgap of semiconductors, which suppresses the freedom in infrared light photodetector design and hinders the development of high‐performance infrared light photodetector. In this work, for the first time infrared light (1030 nm) photodetectors are fabricated based on WS₂/MoS₂ heterostructures. Individual WS₂ and MoS₂ have no response to infrared light. The origin of infrared light response for WS₂/MoS₂ comes from the strong interlayer coupling which shrinks the energy interval in the heterojunction area thus rendering heterostructures longer wavelength detection ability compared to individual components. Considering the low light absorption due to indirect bandgap essence of few layers WS₂/MoS₂ heterostructures, its infrared responsivity is further enhanced with at most ≈25 times but the fast response rate is maintained via surface plasmon resonance (SPR). Such an interlayer coupling induced infrared light response and surface plasmon resonance enhancement strategy paves the way for high‐performance infrared light photodetection of infinite freedom in design.     

Novel and Enhanced Optoelectronic Performances of Multilayer MoS2–WS2 Heterostructure Transistors

Van der Waals heterostructures designed by assembling isolated two‐dimensional (2D) crystals have emerged as a new class of artificial materials with interesting and unusual physical properties. Here, the multilayer MoS₂–WS₂ heterostructures with different configurations are reported and their optoelectronic properties are studied. It is shown that the new heterostructured material possesses new functionalities and superior electrical and optoelectronic properties that far exceed the one for their constituents, MoS₂ or WS₂. The vertical transistor exhibits a novel rectifying and bipolar behavior, and can also act as photovoltaic cell and self‐driven photodetector with photo‐switching ratio exceeding 10³. The planar device also exhibits high field‐effect ON/OFF ratio (>10⁵), high electron mobility of 65 cm²/Vs, and high photo­responsivity of 1.42 A/W compared to that in isolated multilayer MoS₂ or WS₂ nanoflake transistors. The results suggest that formation of MoS₂–WS₂ heterostructures could significantly enhance the performance of optoelectronic devices, thus open up possibilities for future nanoelectronic, photovoltaic, and optoelectronic applications.     

Engineering Substrate Interactions for High Luminescence Efficiency of Transition‐Metal Dichalcogenide Monolayers

It is demonstrated that the luminescence efficiency of monolayers composed of MoS₂, WS₂, and WSe₂ is significantly limited by the substrate and can be improved by orders of magnitude through substrate engineering. The substrate affects the efficiency mainly through doping the monolayers and facilitating defect‐assisted nonradiative exciton recombinations, while the other substrate effects including straining and dielectric screening play minor roles. The doping may come from the substrate and substrate‐borne water moisture, the latter of which is much stronger than the former for MoS₂ and WS₂ but negligible for WSe₂. Using proper substrates such as mica or hexagonal boron nitride can substantially mitigate the doping effect. The defect‐assisted recombination depends on the interaction between the defect in the monolayer and the substrate. Suspended monolayers, in which the substrate effects are eliminated, may have efficiency up to 40% at room temperatures. The result provides useful guidance for the rational design of atomic‐scale light emission devices.     

Electric Field Tunable Interlayer Relaxation Process and Interlayer Coupling in WSe2/Graphene Heterostructures

Transition metal dichalcogenides van der Waals (vdWs) heterostructures present fascinating optical and electronic phenomena, and bear tremendous significance for electronic and optoelectronic applications. As the significant merits in vdWs heterostructures, the interlayer relaxation of excitons and interlayer coupling at the heterointerface reflect the dynamic behavior of charge transfer and the coupled electronic/structural characteristics, respectively, which may give rise to new physics induced by quantum coupling. In this work, upon tuning the photoluminescence (PL) properties of WSe₂/graphene and WSe₂/MoS₂/graphene heterostructures by virtue of electric field, it is demonstrated that the interlayer relaxation of excitons at the heterointerface in WSe₂/graphene, which is even stronger than that in MoS₂/graphene and WSe₂/MoS₂ , plays a dominant role in PL tuning in WSe₂/graphene, while the carrier population in WSe₂ induced by electric field has a minor contribution. In addition, it is discovered that the interlayer coupling between monolayer WSe₂ and graphene is enhanced under high electric field, which breaks the momentum conservation of first order Raman‐allowed phonons in graphene, yielding the enhanced Raman scattering of defects in graphene. The interplay between electric field and vdWs heterostructures may provide versatile approaches to tune the intrinsic electronic and optical properties of the heterostructures.     

Transition Metal Dichalcogenide‐Based Transistor Circuits for Gray Scale Organic Light‐Emitting Displays

Two types of transition metal dichalcogenide (TMD) transistors are applied to demonstrate their possibility as switching/driving elements for the pixel of organic light‐emitting diode (OLED) display. Such TMD materials are 6 nm thin WSe₂ and MoS₂ as a p‐type and n‐type channel, respectively, and the pixel is thus composed of external green OLED and nanoscale thin channel field effect transistors (FETs) for switching and driving. The maximum mobility of WSe₂‐FETs either as switch or as driver is ≈30 cm² V^?1 s^?1, in linear regime of the gate voltage sweep range. Digital (ON/OFF‐switching) and gray‐scale analogue operations of OLED pixel are nicely demonstrated. MoS₂ nanosheet FET‐based pixel is also demonstrated, although limited to alternating gray scale operation of OLED. Device stability issue is still remaining for future study but TMD channel FETs are very promising and novel for their applications to OLED pixel because of their high mobility and I _D ON/OFF ratio.     

Performances of Liquid‐Exfoliated Transition Metal Dichalcogenides as Hole Injection Layers in Organic Light‐Emitting Diodes

2D transition metal dichalcogenide (TMD) nanosheets, including MoS₂, WS₂, and TaS₂, are used as hole injection layers (HILs) in organic light‐emitting diodes (OLEDs). MoS₂, WS₂, and TaS₂ nanosheets are prepared using an exfoliation by ultrasonication method. The thicknesses and sizes of the TMD nanosheets are measured to be 3.1–4.3 nm and more than 100 nm, respectively. The work functions of the TMD nanosheets increase from 4.4–4.9 to 4.9–5.1 eV following ultraviolet/ozone (UVO) treatment. The turn‐on voltages at 10 cd m^?2 for UVO‐treated TMD‐based devices decrease from 7.3–12.8 to 4.3–4.4 V and maximum luminance efficiencies increase from 5.74–9.04 to 12.01–12.66 cd A^?1. In addition, this study confirms that the stabilities of the devices in air can be prolonged by using UVO‐treated TMDs as HILs in OLEDs. These results demonstrate the great potential of liquid‐exfoliated TMD nanosheets for use as HILs in OLEDs.     

Mass Production of High‐Quality Transition Metal Dichalcogenides Nanosheets via a Molten Salt Method

2D transition metal dichalcogenides (TMDs) are well suited for energy storage and field–effect transistors because of their thickness‐dependent chemical and physical properties. However, as current synthetic methods for 2D TMDs cannot integrate both advantages of liquid‐phase syntheses (i.e., massive production and homogeneity) and chemical vapor deposition (i.e., high quality and large lateral size), it still remains a great challenge for mass production of high‐quality 2D TMDs. Here, a molten salt method to massively synthesize various high‐crystalline TMDs nanosheets (MoS₂, WS₂, MoSe₂, and WSe₂) with the thicknesses less than 5 nm is reported, with the production yield over 68% with the reaction time of only several minutes. Additionally, the thickness and size of the as‐synthesized nanosheets can be readily controlled through adjusting reaction time and temperature. The as‐synthesized MoSe₂ nanosheets exhibit good electrochemical performance as pseudocapacitive materials. It is further anticipates that this work will provide a promising strategy for rapid mass production of high‐quality nonoxides nanosheets for energy‐related applications and beyond.     

One‐Pot,Facile, and Versatile Synthesis of Monolayer MoS2/WS2 Quantum Dots as Bioimaging Probes and Efficient Electrocatalysts for Hydrogen Evolution Reaction

In this work, uniform molybdenum disulfide (MoS₂)/tungsten disulfide (WS₂) quantum dots are synthesized by the combination of sonication and solvothermal treatment of bulk MoS₂/WS₂ at a mild temperature. The resulting products possess monolayer thickness with an average size about 3 nm. The highly exfoliated and defect‐rich structure renders these quantum dots plentiful active sites for the catalysis of hydrogen evolution reaction (HER). The MoS₂ quantum dots exhibit a small HER overpotential of ≈120 mV and long‐term durability. Moreover, the strong fluorescence, good cell permeability, and low cytotoxicity make them promising and biocompatible probes for in vitro imaging. In addition, this work may provide an alternative facile approach to synthesize the quantum dots of transition metal dichalcogenides or other layered materials on a large scale.     

Wafer Scale Synthesis and High Resolution Structural Characterization of Atomically Thin MoS2 Layers

Synthesis of atomically thin MoS₂ layers and its derivatives with large‐area uniformity is an essential step to exploit the advanced properties of MoS₂ for their possible applications in electronic and optoelectronic devices. In this work, a facile method is reported for the continuous synthesis of atomically thin MoS₂ layers at wafer scale through thermolysis of a spin coated‐ammonium tetrathiomolybdate film. The thickness and surface morphology of the sheets are characterized by atomic force microscopy. The optical properties are studied by UV–Visible absorption, Raman and photoluminescence spectroscopies. The compositional analysis of the layers is done by X‐ray photo­emission spectroscopy. The atomic structure and morphology of the grains in the polycrystalline MoS₂ atomic layers are examined by high‐angle annular dark‐field scanning transmission electron microscopy. The electron mobilities of the sheets are evaluated using back‐gate field‐effect transistor configuration. The results indicate that this facile method is a promising approach to synthesize MoS₂ thin films at the wafer scale and can also be applied to synthesis of WS₂ and hybrid MoS₂‐WS₂ thin layers.     

Improved Electrical Contact Properties of MoS2‐Graphene Lateral Heterostructure

2D materials have been extensively investigated in view of their excellent electrical/optical properties, with particular attention directed at the fabrication of vertical or lateral heterostructures. Although such heterostructures exhibit unexpected or enhanced properties compared to those of singly used 2D materials, their fabrication is challenged by the difficulty of realizing spatial control and large area integration. Herein, MoS₂ is grown on patterned graphene at variable temperatures, combining the concept of lateral heterostructure with chemical vapor deposition to realize large area growth with precise spatial control, and probe the spatial distribution of graphene and MoS₂ by a number of instrumental techniques. The prepared MoS₂‐graphene lateral heterostructure is employed to construct field effect transistors with graphene as the source/drain and MoS₂ as the channel, and the performance of these transistors (on/off ratio ≈10⁹, maximum field effect mobility = 8.5 cm² V^?1 s^?1) is shown to exceed that of their MoS₂‐only counterparts.     

Advent of 2D Rhenium Disulfide (ReS2): Fundamentals to Applications

Rhenium disulfide (ReS₂) is a two‐dimensional (2D) group VII transition metal dichalcogenide (TMD). It is attributed with structural and vibrational anisotropy, layer‐independent electrical and optical properties, and metal‐free magnetism properties. These properties are unusual compared with more widely used group VI‐TMDs, e.g., MoS₂, MoSe₂, WS₂ and WSe₂. Consequently, it has attracted significant interest in recent years and is now being used for a variety of applications including solid state electronics, catalysis, and, energy harvesting and energy storage. It is anticipated that ReS₂ has the potential to be equally used in parallel with isotropic TMDs from group VI for all known applications and beyond. Therefore, a review on ReS₂ is very timely. In this first review on ReS₂, we critically analyze the available synthesis procedures and their pros/cons, atomic structure and lattice symmetry, crystal structure, and growth mechanisms with an insight into the orientation and architecture of domain and grain boundaries, decoupling of structural and vibrational properties, anisotropic electrical, optical, and magnetic properties impacted by crystal imperfections, doping and adatoms adsorptions, and contemporary applications in different areas.     

MXene Electrode for the Integration of WSe2 and MoS2 Field Effect Transistors

Recently, MXenes, which are 2D early transition metal carbides and carbonitrides, have attracted wide attention because of their excellent conductivities. Here, the electrode applications of Ti₂C(OH)_xF_y, one member of the MXene family, in WSe₂ and MoS₂ field effect transistors (FETs) are assessed. Kelvin probe force microscopy analysis is performed to determine its work function, which is estimated to be ≈4.98 eV. Devices based on WSe₂/Ti₂C(OH)_xF_y and MoS₂/Ti₂C(OH)_xF_y heterostructures are fabricated with the mechanical transfer method and their electronic performances evaluated. The temperature‐dependent current–voltage transfer characteristics of the devices are determined to extract their Schottky barrier heights. The hole barrier between WSe₂ and Ti₂C(OH)_xF_y is estimated to be ≈0.23 eV and the electron barrier between the MoS₂ band and Ti₂C(OH)_xF_y is ≈0.19 eV, which indicates that the pinning effect occurs at the MoS₂/Ti₂C(OH)_xF_y interface but not at the WSe₂/Ti₂C(OH)_xF_y interface; this difference arises because of the difference between the band structures of WSe₂ and MoS₂. A complementary metal–oxide–semiconductor inverter based on these electrode properties of Ti₂C(OH)_xF_y with MoS₂ (n‐channel) and WSe₂ (p‐channel) is fabricated, which demonstrates that Ti₂C(OH)_xF_y is a promising electrode for future nanoelectronics applications.     

1T‐Phase WS2 Protein‐Based Biosensor

Metallic 1T‐phase transition metal dichalcogenides have been recognized for their desirable properties like high surface‐to‐volume ratio, high conductivity, and capacitive behavior, making them outstanding for catalytic and sensing applications. Herein, a hydrogen peroxide (H₂O₂) biosensor is constructed by the immobilization of hemoglobin (Hb) on 1T‐phase WS₂ (1T‐WS₂) sheets, and entrapment by glutaraldehyde. 1T‐WS₂ not only displays electrocatalytic activity toward the reduction of H₂O₂ but also provides a high surface‐to‐volume ratio and conductive platform for the immobilization of Hb and facilitation of its electron transfer to the electrode surface. The advantageous role of 1T‐phase WS₂ is further demonstrated for the construction of a heme‐based H₂O₂ biosensor compared to its 1T‐phase MoS_2, MoSe₂, and WSe₂ counterparts. Synergistic interactions between 1T‐WS₂ and Hb result in a H₂O₂ biosensor with high analytical performance in terms of wide range, sensitivity, selectivity, reproducibility, repeatability, and stability. These findings have profound impact in the research fields of electrochemical sensing and biodiagnostics.     

High‐Performance Transition Metal Dichalcogenide Photodetectors Enhanced by Self‐Assembled Monolayer Doping

Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based doping on the performance of WSe₂‐ and MoS₂‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 10¹¹ for octadecyltrichlorosilane (OTS) p‐doping and ≈10¹¹ for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm² V^?1 s in OTS/WSe₂ transistors and from 28.75 to 142.2 cm² V^?1 s in APTES/MoS₂ transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 10⁴ A W^?1) in the OTS/WSe₂ devices and by a factor of ≈26.4 (from 219 to 5.75 × 10³ A W^?1) in the APTES/MoS₂ devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe₂ devices and ≈24.5‐fold in the APTES/MoS₂ devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.     

Large‐Area Synthesis of Continuous and Uniform MoS2 Monolayer Films on Graphene

Heterostructures composed of multiple layers of different atomically thin materials are of interest due to their unique properties and potential for new device functionality. MoS₂‐graphene heterostructures have shown promise as photodetectors and vertical tunnel transistors. However, progress is limited by the typically micrometer‐scale devices and by the multiple alignments required for fabrication when utilizing mechanically exfoliated material. Here, the synthesis of large‐area, continuous, and uniform MoS₂ monolayers directly on graphene by chemical vapor deposition is reported, resulting in heterostructure samples on the centimeter scale with the possibility for even larger lateral dimensions. Atomic force microscopy, photoluminescence, X‐ray photoelectron, and Raman spectroscopies demonstrate uniform single‐layer growth of stoichiometric MoS₂. The ability to reproducibly generate large‐area heterostructures is highly advantageous for both fundamental investigations and technological applications.     

Mixed‐Dimensional 1D ZnO–2D WSe2 van der Waals Heterojunction Device for Photosensors

2D layered van der Waals (vdW) atomic crystals are an emerging class of new materials that are receiving increasing attention owing to their unique properties. In particular, the dangling‐bond‐free surface of 2D materials enables integration of differently dimensioned materials into mixed‐dimensional vdW heterostructures. Such mixed‐dimensional heterostructures herald new opportunities for conducting fundamental nanoscience studies and developing nanoscale electronic/optoelectronic applications. This study presents a 1D ZnO nanowire (n‐type)–2D WSe₂ nanosheet (p‐type) vdW heterojunction diode for photodetection and imaging process. After amorphous fluoropolymer passivation, the ZnO–WSe₂ diode shows superior performance with a much‐enhanced rectification (ON/OFF) ratio of over 10⁶ and an ideality factor of 3.4–3.6 due to the carbon–fluorine (C? F) dipole effect. This heterojunction device exhibits spectral photoresponses from ultraviolet (400 nm) to near infrared (950 nm). Furthermore, a prototype visible imager is demonstrated using the ZnO–WSe₂ heterojunction diode as an imaging pixel. To the best of our knowledge, this is the first demonstration of an optoelectronic device based on a 1D–2D hybrid vdW heterojunction. This approach using a 1D ZnO–2D WSe₂ heterojunction paves the way for the further development of electronic/optoelectronic applications using mixed‐dimensional vdW heterostructures.     

2D/2D 1T‐MoS2/Ti3C2 MXene Heterostructure with Excellent Supercapacitor Performance

2D/2D heterostructures can combine the collective advantages of each 2D material and even show improved properties from synergistic effects. 2D Transition metal carbide Ti₃C₂ MXene and 2D 1T‐MoS₂ have emerged as attractive prototypes in electrochemistry due to their rich properties. Construction of these two 2D materials, as well as investigation about synergistic effects, is absent due to the instability of 1T‐MoS₂. Here, 3D interconnected networks of 1T‐MoS₂/Ti₃C₂ MXene heterostructure are constructed by magneto‐hydrothermal synthesis, and the electrochemical storage mechanisms are investigated. Improved extra capacitance is observed due to enlarged ion storage space from a synergistically interplayed effect in 3D interconnected networks. Outstanding rate performance is realized because of ultrafast electron transport originating from Ti₃C₂ MXene. This work provides an archetype to realize excellent electrochemical properties in 2D/2D heterostructures.