In situ Formation of Palladium Nanoparticles Inside the Pore Channels of Ordered Mesoporous Silica

Palladium-containing SBA-15 (SBA-15-Pd) was synthesized via an in situ approach. In this procedure, molecular assembly template was employed as a hydrophobic carrier to provide the compatible environment for the hydrophobic compounds. The hydrophobic solvent (CHCl₃) was used as a transport medium to inject the Pd precursor (Pd(acetylacetonate)₂) directly into the inner core of the surfactant micelles. A 1.46 wt% Pd loading was achieved without the loss of pore ordering. Highly dispersed and uniform palladium nanoparticles could be detected using transmission electron microscopy confirming also the absence of large particles outside the mesopore silica. The catalytic activities of the SBA-15-Pd nanocomposites were investigated in Heck coupling reactions with activated and non-activated aryl substrates. The SBA-15-Pd nanocomposites exhibit excellent catalytic activities and reuse ability in air for the Heck carbon–carbon coupling reactions.     

Pd/SBA-15 nanocomposite: Synthesis, structure and catalytic properties in Heck reactions

Pd nanoparticles supported in mesoporous silica SBA-15 (or Pd/SBA-15 nanocomposites) were prepared by ion-exchange with cationic Pd precursor in an alkaline solution on an uncalcined silica. The high Pd loading in these nanocomposites can be achieved up to 5.21 wt.% by adjusting the pH value of the solution. The surface area and the pore volume decrease with increasing Pd loading. The Pd nanoparticles equal to or smaller than 6 nm in size in the nanocomposites are distributed in the channels of the mesoporous SBA-15. The Pd/SBA-15 nanocomposites exhibit excellent catalytic activities and high reuse ability in air for the Heck carbon-carbon coupling reactions.     

Carboncarbon bond forming reactions: Application of covalently anchored 2,4,6-triallyloxy-1,3,5-triazine (TAT) Pd(II) complex over modified surface of SBA-15 to Heck,Suzuki, Sonogashira and Hiyama cross coupling reactions

A highly active SBA-15-TAT-Pd(II) catalyst was synthesized from organofunctionalized SBA-15 and 2,4,6-triallyloxy-1,3,5-triazine. The catalyst was employed in carrying out Heck, “copper-free” Sonogashira, Suzuki and Hiyama cross coupling reactions. Under the optimized conditions the catalyst displays excellent catalytic activity in delivering the desired products in good to excellent yields. The catalytic system exhibited superior activity regarding the time taken for the completion of reaction, isolation, Pd loading (0.62 mmol%) and yields of products as compared to the earlier reported heterogeneous SBA-15 anchored Pd catalysts. The catalyst could be recycled and reused for five times without any appreciable loss of catalytic activity.     

Highly active recyclable SBA-15-EDTA-Pd catalyst for Mizoroki-Heck,Stille and Kumada C–C coupling reactions

Highly efficient SBA-15-EDTA-Pd(11) heterogeneous catalyst was synthesized by covalent anchoring Pd-EDTA complex over organo-modified surface of SBA-15. SBA-15-EDTA-Pd(11) catalyst was found to exhibit excellent catalytic activity in appreciable yield for Heck, Stille and Kumada cross-coupling reactions. Catalytic system exhibited excellent activity for completion of reaction, isolation, Pd loading (0.87 mmol%) and yields of products as compared to earlier reported heterogeneous supported Pd catalysts. Covalently anchored heterogeneous SBA-15-EDTA-Pd(11) catalyst can be recycled for more than five times without noticeable loss in activity and selectivity.     

A Simple and Efficient Route to Active and Dispersed Silica Supported Palladium Nanoparticles

Various mesoporous silica supported Pd materials were prepared by different methodologies in order to control and optimize the metal nanoparticle sizes for catalytic applications. The catalytic activities (conversion, mol% and selectivity to methyl-cinnamate) of the supported palladium catalysts were investigated in the Heck reaction under microwave irradiation using various haloarenes. Pd materials prepared by co-precipitation exhibited a very poor activity in the Heck reaction compared to that of Pd impregnated samples. Impregnated materials prepared without the use of a specific reducing agent had comparable activities to those of APTS-NaBH₄ reduced Pd materials, validating the simplicity of the methodology. High selectivities to methylcinnamate were obtained for all materials.     

Palladium complex embedded crosslinked polystyrene nanofibers as a green and efficient heterogeneous catalyst for coupling reactions

A simple and green chemical modification coupled with electrospinning technique has been developed to incorporate tetrakis(triphenylphosphine)palladium [Pd(PPh₃)₄] inside crosslinked polystyrene nanofibers (Pd@CPS) as an efficient and stable heterogeneous palladium catalyst. The catalytic activities and recyclabilities of the prepared Pd@CPS catalyst have been evaluated by using Suzuki and Heck reactions of various aromatic halides separately with phenylboronic acid and alkenes. The Pd@CPS exhibited high-catalytic activities for the Suzuki and Heck reactions of aromatic iodides to afford the products in excellent yields (coupling yields >88%). The catalytic activities and the nanofiber structure remained essentially unchanged even after recycling for five times. The high activities and stabilities of the prepared Pd@CPS catalyst can be attributed to the ultrafine fiber and embedment of palladium active species inside the nanofibers.     

负载型Pd/SBA—15催化剂催化性能研究

将负载型催化剂Pd/SBA—15用于催化邻氯硝基苯加氢。考察了反应温度、催化剂用量对Pd/SBA—15催化性能的影响,并考察了催化剂的使用寿命。实验结果表明,Pd/SBA—15催化剂表现出很好的催化性能,有望应用于工业生产。     

Polypyrrole–Palladium Nanocomposite-Coated Latex Particles as a Heterogeneous Catalyst in Water

Abstract  

Polypyrrole–palladium nanocomposite-coated cross-linked polystyrene latex particles (PS/PPy–Pd) showed an excellent catalytic activity for Suzuki and Heck reactions in aqueous media. The PS/PPy–Pd can be recovered easily and quantitatively through the repeated uses with simple filtration and they maintain their high catalytic activities.     

介孔分子筛SBA-15的改性研究进展

从金属改性、酸改性和氧化物改性三方面综述了介孔分子筛SBA-15的改性研究进展,重点介绍了SBA-15表面功能化后引入金属改性的方法。评述了金属纳米粒子的制备对改性的SBA-15催化剂催化性能的影响。     

有序介孔氮化碳的制备及其催化Knoevenagel缩合反应

以四氯化碳和乙二胺为前驱体,介孔氧化硅SBA-15为硬模板剂,采用纳米浇铸法合成系列不同碳氮比的介孔类石墨相氮化碳材料CN-SBA15。通过N2吸附-脱附、XRD、TEM、FT-IR和XPS等对CN-SBA15进行表征,并考察其在苯甲醛和丙二腈Knoevenagel缩合反应中的催化性能。结果表明,CN-SBA15的比表面和孔体积与前驱体的比例有直接关系,很好地反向复制了原SBA-15的有序结构。CN-SBA15含有大量的N杂环结构,在Knoevenagel缩合反应中显示出较高的催化活性、重复使用性和底物普适性。     

Direct Synthesis of Hydrogen Peroxide from Hydrogen and Oxygen over Palladium Catalyst Supported on SO3H-Functionalized SBA-15

Palladium catalyst supported on SO₃H-functionalized SBA-15 (denoted as Pd/SO₃H-SBA-15) was applied to the direct synthesis of hydrogen peroxide from hydrogen and oxygen. For comparison, palladium catalyst supported on SBA-15 (denoted as Pd/SBA-15) was also employed for the direct synthesis of hydrogen peroxide. Selectivity for hydrogen peroxide, yield for hydrogen peroxide, and final concentration of hydrogen peroxide over Pd/SO₃H-SBA-15 catalyst were much higher than those over Pd/SBA-15 catalyst. The high catalytic performance of Pd/SO₃H-SBA-15 catalyst was attributed to the enhanced acid amount of SO₃H-SBA-15 support, which served as an alternate acid source in the direct synthesis of hydrogen peroxide from hydrogen and oxygen.     

A highly efficient polymer‐anchored palladium(II) complex catalyst for hydrogenation,Heck cross‐coupling and cyanation reactions

BACKGROUND: Precise architectures of steric and electronic properties of palladium species play a crucial role in designing highly functionalized catalyst systems responsible for target organic transformations. Pd catalysts supported on polymer materials have been employed extensively as catalysts not only for hydrogenation but also for coupling reactions in the production of fine chemicals. RESULTS: A new polymer‐anchored Pd(II) complex has been synthesized and characterized. The catalyst shows high catalytic activity in the hydrogenation of styrene oxide, Heck cross‐coupling and cyanation reactions of aryl halides. The effect of various reaction parameters were investigated to optimize reaction conditions. The catalytic system shows good activity in the hydrogenation of styrene oxide (conversion 98%) with a selectivity to 2‐phenylethanol (93%) which is higher than its homogeneous analogues. The catalyst also exhibits excellent catalytic activity for the Heck cross‐coupling and cyanation reactions of various substituted and non‐substituted aryl halides. CONCLUSIONS: Results demonstrate that the catalyst is robust and stable and can be recovered quantitatively by simple filtration and reused several times without loss of activity. Copyright © 2010 Society of Chemical Industry     

Pd/C embedded crosslinked polystyrene fibers as an efficient catalyst for Heck reactions

Pd/C embedded polystyrene fibers were successfully prepared by electrospinning. The polystyrene molecules were then cross-linked by paraformaldehyde in sulfuric acid to improve the solvent resistance of composite fibers. SEM images conformed the preparation of uniform and smooth composite fibers. FT-IR spectra demonstrated that the polystyrene molecules inside fibers have been sulphonated and crosslinked. Heck reactions were used to evaluate the catalytic performance of these novel composite fibers. The catalysis results show that this composite fiber mat catalyzed Heck reactions could be evidently promoted by using preferred reducing alcohol agent and solvent. Under the optimized reaction conditions, this composite fiber mat could effectively catalyze the Heck reactions of aromatic iodides with n-butyl acrylate to afford the products with satisfied yields. Especially, compared with the particulate Pd/C catalyst, the separation and recycling of this fibrous catalyst from the reaction mixture were significantly improved due to the larger fibrous structure. At last, this fiber catalyst was successfully reused for eight times with little loss of initial catalytic activity, which was even better than the pristine Pd/C catalyst. Hence, embedment of particulate supported metal catalysts inside the crosslinked polystyrene fibers can effectively improve their catalytic performance and handiness.     

Applications of Amine-functionalized Mesoporous Silica in Fine Chemical Synthesis

SBA-15 silica containing homogeneously distributed amine-functional groups and of fiber or platelet morphology was prepared through a modified co-condensation method using P123 copolymer as template under acidic condition. Synthetic factors which led to well-ordered mesoporous materials with high loadings of various amine groups were discussed. The resultant mesoporous materials were efficient base catalysts in Knoevenagel and Claisen–Schmidt addition reactions. The activities over SBA-15 materials with different amino-functional groups are compared. Moreover, the advantage of ordered large mesopores of SBA-15 in catalyzing liquid phase reactions was demonstrated, and the reaction rate could be further increased when SBA-15 was with platelet morphology and short mesochannels.     

Oxidative Heck Coupling Using Pd(II) Supported on Organosilane-Functionalized Silica Mesocellular Foam

Oxidative Heck couplings of arylboronic acids and olefins are carried out under air to facilitate reoxidation of palladium without the need for an added co-oxidant using Pd(II) supported on silica surface-tethered bipyridyl, iminopyridine, or 3-aminopropyl ligands. Use of silica-supported iminopyridine or bipyridine ligands gives active catalysts, with the bipyridine-based catalyst being most efficient. The Heck products are formed with high yields and selectivities over the 1,4-addition product, and the silica supported bipyridine-based catalyst is easily recovered via simple filtration. Unlike similar supported catalysts in traditional Heck reactions involving aryl halides and olefins, the catalysts presented here can be used for multiple catalytic cycles without activity or selectivity loss.     

Oxidative coupling of methane on the Na2WO4-MnxOy catalyst: COK-12 as an inexpensive alternative to SBA-15

Recent investigations have revealed that SBA-15 supported Na₂WO₄-Mn_xO_y catalyst exhibits an enhanced performance compared to other silica supports for the oxidative coupling of methane. We report on the use of the inexpensive and upscalable SBA-15 analog denoted as COK-12 as a support material for this catalytic system. COK-12 is synthesized at room temperature and almost neutral pH using an inexpensive silica source. A performance matching that of the SBA-15 supported catalyst was achieved. We observe a decrease in activity of the catalyst as a result of pelletizing by pressing.     

Geometrical confinement effect in the liquid-phase semihydrogenation of phenylacetylene over mesostructured silica supported Pd catalysts

Three types of mesostructured silica with different pore sizes (MCM-41, SBA-15, and MCF) were employed as supports for deposition of colloidal Pd nanoparticles obtained by the solvent reduction method. As determined by transmission electron microscopy (TEM), average Pd particle sizes on the various supports were quite similar and were not significantly different from the colloidal particles (~ 2.3–2.5 nm). There was limited access of the reactants to Pd active sites and suppression of CO chemisorption for the Pd/SBA-15, probably because most of the Pd particles were located inside the pores. This geometrical confinement effect in the case of Pd/SBA-15, however, resulted in an improved selectivity towards styrene at complete conversion of phenylacetylene. Such effect was similar to those reported in the literature for the Pd nanoparticles encapsulated in support matrices (simultaneous synthesis) and the presence of strong metal-support interaction effect in Pd/TiO₂.     

Role of the support on the activity of silica-supported TiO2 photocatalysts: Structure of the TiO2/SBA-15 photocatalysts

Immobilization of TiO₂ on silica materials has been commonly proposed in order to make easier the separation of the catalyst after the photocatalytic reactions in aqueous systems. The main drawback of the supported photocatalysts is that they usually show lower activities in comparison with powdered TiO₂ materials. The aim of this work is to elucidate the structure of some silica-supported TiO₂ photocatalysts recently developed as well as to evaluate the role that the porous structure of the support can play in the observed photocatalytic activities. In comparison with the use of an amorphous silica support, the use of the mesostructured silica SBA-15 produces an ordered structure in which TiO₂ crystals of similar sizes, independently of titania loading, are located inside the mesoporous channels of the support. The photocatalytic treatment of several cyanide-containing compounds is analyzed and the results are explained in terms of the structure of every catalyst. Depending on the model compound, the characteristic structure of the TiO₂/SBA-15 materials allows increasing up to eight times the activity achieved by the Degussa P25 TiO₂. The main conclusion of this work is the strong influence of the textural properties of the support on the catalytic activity of immobilized TiO₂ photocatalysts.     

Short channeled Zr-Ce-SBA-15 supported palladium catalysts for toluene catalytic oxidation

Short channeled Zr-Ce-SBA-15 (ZCS) mesoporous materials were synthesized through hydrothermal routes without addition of mineral acids. 0.5 wt.% palladium was loaded on ZCS and SBA-15 via an ethanol reduction approach. Pd/ZCS possesses unique hexagonal platelet morphologies with short channels running parallel to the thickness in the range of 400–500 nm, while Pd/SBA-15 has a fibrous macrostructure with channels at the micrometer scale. Palladium species present in supports as well dispersed PdO nanocrystals with diameter of ca. 5–6 nm. Comparing with Pd/SBA-15, Pd/ZCS shows enhanced catalytic activity for toluene oxidation, which is ascribed to short channeled supports facilitating the molecular diffusion.     

Heck reactions catalyzed by oxide-supported palladium – structure–activity relationships

The catalytic activity and selectivity of palladium supported on various metal oxides in carbon–carbon coupling reactions of aryl bromides with styrene (Heck reaction) were investigated. The activity is determined by the nature of the oxide support and the Pd dispersion (structure–activity relationships). The relation of homogeneous (leaching) and heterogeneous mechanisms is discussed. This revised version was published online in June 2006 with corrections to the Cover Date.