共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
基于仪表总线的分布式测控系统设计 总被引:3,自引:0,他引:3
介绍一种基于仪表总线的小型分布式测控系统的设计方案。采用TI公司的仪表总线专用收发芯片TSS721A及具有极低功耗的MSP430系列单片机,使系统设计大为简化。以办公楼安全监控系统的设计为例进行了说明。 相似文献
4.
为解决示教机器人无线通讯模块高成本的问题,选用nRF2401芯片,利用SoC(system-onchip)方法设计,采用少量外围元件组成射频收发电路;根据无线通信系统的一般结构和nRF2401芯片的特点,从计算机接口电路、射频收发部分、单片机控制部分3方面设计无线通讯系统电路。经过验证,节约了成本、达到了设计的要求,为示教机器人控制系统的设计提供了可借鉴的模式。 相似文献
5.
应用低功耗的无线收发芯片CC1000和ATMEL公司生产的AT-MEGA128单片机组成的无线数据传输系统,具有低成本、低功耗、易于安装和高可靠性等特点,同时其使用频段满足国家无线管制的要求,无须申请即可使用。因而是低功耗、低成本要求的无线通信系统的理想选择。 相似文献
6.
7.
《仪表技术与传感器》2020,(2)
为了测试电磁发射过程中高功率脉冲电源的充、放电电压,设计了一种基于FPGA的高电压测试系统。系统使用P6015A高压探头将高电压转换成低电压信号,由A/D转换器实现模-数转换;FPGA芯片作为电路的主控单元,将数据编帧之后存储在大容量FLASH芯片中;最后经过USB接口芯片将采集到的数据上传到上位机显示分析;为确保试验人员安全,采集命令由串口数据收发软件通过无线收发模块进行远程控制。系统已应用于电磁发射试验中,实现对额定工作电压为7.6 kV的电容储能型脉冲电源充、放电电压信号的采集存储与数据分析。应用试验表明,系统具有测量准确度高、安全可靠性强等特点,还可用于其他领域的高电压信号采集。 相似文献
8.
介绍了利用MSP430F149作为主控芯片的超声波测距的基本原理,开发了具有无线收发功能的超声波测距仪表,适合复杂环境安装应用。给出了设计方法和系统框图。该系统包含脉冲发射电路、接收电路、温度补偿电路和相应的控制电路。采用nRF905无线收发芯片,实现数据的实时开路传输。实验结果表明该仪表提高了超声波测距的测量精度、可靠性高,可满足工业现场使用要求。 相似文献
9.
10.
11.
12.
Y. I. Bocharov V. A. Butuzov A. B. Simakov 《Instruments and Experimental Techniques》2017,60(6):800-810
A multichannel integrated circuit intended for readout and analog preprocessing of signals from multielement photodetectors has been designed and evaluated. It is optimized for use with silicon photomultiplier arrays. The chip includes current-signal and voltage-signal processing channels. Except for the front end, all of the channels are identical. Each of them contains a code-controlled current amplifier, an integrator, two digitally controlled variable gain amplifiers, a filter, a peak detector, an output buffer with a level shifter, an amplitude discriminator, two timers, and a control unit. The device is configured and tuned by uploading data via a serial interface. The chip is part of a chipset that also includes a multichannel analog-todigital converter with a buffer memory and voltage reference. This chipset makes it possible to build a fullfeatured multielement photodetector signal-processing system, as well as signal processing systems for multichannel detectors of other types. The integrated circuit is implemented in the 0.35 μm CMOS process. This paper also describes the features of the circuits of the device, analyzes the parameters of several of its basic units, and discusses the test results. 相似文献
13.
14.
随着投影技术的发展,投影系统已被广泛应用于工业和消费电子领域,为了适应市场对其微型化、高清画面和低功耗的要求,设计以德州仪器的DLP2010芯片组为核心,以FPGA为前端控制器,通过I2C和并行视频图像信号对0.2in(1in=25.4mm)DLP芯片组进行控制及图像的投影显示。该设计可使整个设备体积微型化、能耗低、投影图像清晰,适合穿戴式微投影场景的使用。 相似文献
15.
本文研究设计了一种新型三维运动混合搅拌机,包括机架、混合桶、搅拌轴、搅拌电机、旋转电机、旋转轴、集电环和电刷等。该混合搅拌机将混合桶的旋转与混合桶内搅拌轴的旋转结合在一起,大幅度提高了混料的精度和效率,对于任何性状的物料都可以达到很好的混合效果,具有混合精度高、结构简单、适用范围广等优点。 相似文献
16.
The design of an efficient mechanical mixer for embedding media for electron microscopy is described. The resins are mixed within a closed bottle mounted on the plate of a commercial vibration sander. The primary aim of the construction was to reduce the exposure to potentially toxic substances; in addition it has proven to be more convenient to use the apparatus than to mix the resins by hand. 相似文献
17.
18.
A pulse-burst laser has been installed for Thomson scattering measurements on the Madison Symmetric Torus reversed-field pinch. The laser design is a master-oscillator power-amplifier. The master oscillator is a commercial Nd:YVO(4) laser (1064 nm) which is capable of Q-switching at frequencies between 5 and 250 kHz. Four Nd:YAG (yttrium aluminum garnet) amplifier stages are in place to amplify the Nd:YVO(4) emission. Single pulses through the Nd:YAG amplifier stages gives energies up to 1.5 J and the gain for each stage has been measured. Repetitive pulsing at 10 kHz has also been performed for 2 ms bursts, giving average pulse energies of 0.53 J with ΔE/E of 4.6%, where ΔE is the standard deviation between pulses. The next step will be to add one of two Nd:glass (silicate) amplifier stages to produce final pulse energies of 1-2 J for bursts up to 250 kHz. 相似文献
19.
20.
为实现轧制力传感器的快速安装,将附着式传感器安装于轧机机架外侧,通过测量机架变形间接测取轧制力.传感器内的智能信号调理电路,根据所采集信号的特征,反馈控制数字电位器补偿传感器的漂移信号,实现传感器信号零点的实时自动校准.将基于nRF401的无线模块集成于传感器内,该模块有两个频道,轧机两侧的传感器各占一个频道,使两侧轧制力信息可实时并行发送.在放大器前设置射频干扰滤波器,以消除射频信号对系统测量精度的影响;将无线模块的频道与传感器安装位置绑定,设定传感器优先工作频道,规定传感器安装顺序,使传感器可自动选择工作频道,系统可自动识别不同侧的轧制力信号,使传感器满足即装即用的要求. 相似文献