Cyclodextrin nanosponges to enhance the dissolution profile of quercetin by inclusion complex formation

ABSTRACT

The therapeutic potential of quercetin is mostly hampered by its low water solubility and poor absorption. The aim of this study was to enhance the dissolution rate of quercetin by molecular encapsulation with cyclodextrin nanosponges. The inclusion complexes were obtained by freeze-drying method. Inclusion complexes were characterized by Fourier Transformed Infrared Spectroscopy (FTIR), x-ray diffraction (XRD), Differential Scanning Calorimetry (DSC), transmission electron microscopy (TEM), and dissolution testing. FTIR, XRD, and DSC studies confirmed the interactions of quercetin with nanosponges. TEM images revealed the spherical morphology of complexes. The dissolution of the drug nanosponge complex was significantly higher compared with the pure drug in simulated intestinal fluid (SIF; pH 6.8). The results indicated that the degree of cross-linking has the significant influence on dissolution. Nanosponges with lower degree of cross-linking released 91% of the drug within 45 min, whereas nanosponges with higher degree of cross-linking resulted in sustained release up to 24 h.     

Formulation and evaluation of meloxicam oral disintegrating tablet with dissolution enhanced by combination of cyclodextrin and ion exchange resins

Context: The bitter taste of drug is masked by the exchange of ionized drugs with counter ions of ion exchange resin, forming “resinate”. Cyclodextrin reduces the unpleasant taste and enhances the drug solubility by encapsulating drug molecules into its central cavity.

Objective: Oral disintegrating tablets (ODTs) using the combination of ion exchange resin and cyclodextrin was developed, to mask the bitter taste and enhance drug dissolution.

Methods: Meloxicam (MX) was selected as a model drug. Formulations containing various forms of MX (free drug, MX-loaded resin or resinate, complexes of MX and 2-hydroxypropyl-β-cyclodextrin (HPβCD) or MX/HPβCD complexes, and a mixture of resinate and MX/HPβCD complexes) were made by direct compression. The ODTs were evaluated for weight variation, thickness, diameter, hardness, friability, disintegration time, wetting time, MX content, MX release, degree of bitter taste and stability.

Results and discussion: The tablet hardness was ～3?kg/in², and the friability was <1%. Tablets formulated with resinate and the mixture of resinate and MX/HPβCD complexes disintegrated rapidly within 60?s, which is the acceptable limit for ODTs. These results were corresponded to the in vivo disintegration and wetting times. However, only tablets containing the mixture of resinate and MX/HPβCD complexes provided complete MX dissolution and successfully masked the bitter taste. In addition, this tablet was stable at least 6 months.

Conclusions: The combination of ion exchange resin and cyclodextrin could be used in ODTs to mask the bitter taste and enhance the dissolution of drugs that are weakly soluble in water.     

Formulation design and pharmaceutical development of a novel controlled release form of azithromycin for single-dose therapy

Background: Azithromycin's long serum half-life (～68 hours) allows for a short 5-day, 3-day, and now 1-day course therapy with a large 2-g dose. Although the single-dose, 1-day therapy offers the advantage of 100% patient compliance, tolerance of such large dose becomes an issue. Methods: The dosage form discussed in this article employed a melt-congealing process to produce matrix microspheres with a 3-hour, first-order release. The vehicle blend included alkalizing agents to minimize GI side effects, minimize loss of bioavailability, and mask the bitter taste of azithromycin. Results: Azithromycin microspheres are small (～200 μm) with a narrow particle size distribution. Drug release was optimized by controlling the amount of dissolution enhancer in the microspheres and by the addition of proper amount of alkalizing agents in the vehicle blend. The final formulation was selected based on a balance between bioavailability and tolerability. Conclusions: Drug release from the microspheres was shown to occur via diffusion through the larger pores formed by dissolution of azithromycin crystals and the smaller interconnected pores formed by dissolution of poloxamer. Several clinical studies have been conducted with the formulation to evaluate its pharmacokinetics and to demonstrate its safety and efficacy. The combined suspension formulation for a 2-g dose of azithromycin provided taste-masking and good tolerability.     

Formulation and development of oral dry suspension using taste masked Ornidazole particles prepared using Kollicoat® Smartseal 30 D

The purpose of this work was to taste mask highly bitter active, Ornidazole by means of particle coating. The aim of the work was further extended into formulating these coated particles into an acceptable oral dosage form such as dry suspension. Ornidazole drug particles were coated using Kollicoat^® Smartseal 30 D as a taste masking polymer. Kollicoat^® Smartseal 30 D is a methyl methacrylate – diethylaminoethyl methacrylate copolymer (6:4). Successful taste masking was achieved for Ornidazole with both top spray and bottom spray techniques using fluid bed processor. Effective taste masking was achieved at a weight gain of 50% w/w and 40% w/w for bottom and top spray techniques respectively without having a significant effect on the release pattern. A taste masked dry suspension was prepared with around 80% w/w coated Ornidazole particles and pH was maintained around 7–8. The suspension prepared with these coated Ornidazole particles, which were maintained in the alkaline pH was found to be stable for 7 days without affecting the taste. The bitter taste intensity was evaluated using volunteers by comparison of test samples with standard solutions containing Ornidazole at various concentrations. Thus, Kollicoat^® Smartseal 30 D was found to be an effective polymer for taste masking of a bitter active like Ornidazole. The formulation development of taste masked dry suspensions was only possible due to unique properties possessed by Kollicoat^® Smartseal 30 D.     

Investigation of different types of nano drug delivery systems of atorvastatin for the treatment of hyperlipidemia

Abstract

Different nanoparticles, namely solid lipid nanoparticles, nanocrystals and nanosponges loaded with atorvastatin were successfully fabricated with desirable technological properties which reckoned promising methods of their preparation. Further, suitable characterization and evaluation parameters for in-vitro and in-vivo studies were conducted which led to increase in drug’s bioavailability, provided better in-vivo efficacy and reduced toxicity in treating hyperlipidemia systemically. Particle sizes were found to be less than 300?nm with minimal polydispersity indices and maximized entrapment efficiency which are pre-requisites for their absorption in intestines. Drug release studies showed sustained release for a prolonged period, which was justified by release kinetics. Augmented bioavailability and reduced lipoprotein levels were key observations. In addition, reduced hepatotoxicty, decreased myotoxicity and diminished drug distribution were also the important highlights of these developed nanosystems as compared with the pure drug and marketed formulation. Histopathology of liver confirmed reduced hepatotoxicity. An elaborate comparison of these nanoparticles along with pure drug and marketed formulation concluded that nanosponges are potentially one of the best nanosystems for treating hyperlipidemia by systemic delivery.     

Taste masking of azithromycin by resin complex and sustained release through interpenetrating polymer network with functionalized biopolymers

Abstract

Objective: The objective was to evaluate taste masking of azithromycin (AZI) by ion exchange resins (IERs) and the formation of covalent semi interpenetrating polymer network (IPN) beads using chitosan (CS) and sodium carboxylated agarose (SCAG) for sustained release of drug.

Methods: Methacrylic acid (MAA)-based IERs were prepared by suspension polymerization method. Drug release complexes (DRCs) were prepared by different drug:resin ratios i.e. 1:1, 1:2 and 1:4. The resultant DRCs were characterized using DSC, FTIR, PXRD, in vivo and in vitro taste masking, and in vitro drug release at gastric pH. IPN beads were prepared by entrapping DRCs with bio polymers and cross linked with trisodium citrate (NaCIT), and further cross-linked with glutaraldehyde (GA) for sustained release of AZI.

Results: In vitro and in vivo taste masking studies showed that MD1:4 DRC formulation was optimal. The release of AZI from DRC was found to be very fast at gastric pH i.e. 97.37?±?1.02% within 45?min. The formation of IPN beads was confirmed by FTIR. The release of drug from IPN beads at gastric and intestinal pH was found to be “<28% and <60%”, respectively. The release kinetics showed Fickian diffusion profile for ionically cross-linked beads and zero-order release mechanism for GA cross-linking beads.

Conclusions: DRCs can be effectively used for taste masking and newly formulated IPN beads demonstrated sustained release of AZI.     

Enhancement of oral bioavailability of anti-HIV drug rilpivirine HCl through nanosponge formulation*

Objective: To synthesize β cyclodextrin nanosponges using a novel and efficient microwave mediated method for enhancing bioavailability of Rilpivirine HCl (RLP).

Significance: Belonging to BCS class II RLP has pH dependent solubility and poor oral bioavailability. However, a fatty meal enhances its absorption hence the therapy indicates that the dosage form be consumed with a meal. But then it becomes tedious and inconvenient to continue the therapy for years with having to face the associated gastric side effects such as nausea.

Method: Microwave synthesizer was used to mediate the poly-condensation reaction between β-cyclodextrin and cross-linker diphenylcarbonate. Critical parameters selected were polymer to cross-linker ratio, Watt power, reaction time and solvent volume. Characterization studies were performed using FTIR, DSC, SEM, ¹H-NMR and PXRD. Molecular modeling was applied to confirm the possibility of drug entrapment. In vitro drug dissolution followed by oral bioavailability studies was performed in Sprawley rats. Samples were analyzed using HPLC.

Results: Microwave synthesis yields para-crystalline, porous nanosponges (～205?nm). Drug entrapment led to enhancement of solubility and a two-fold increase in drug dissolution (P?C_max and AUC_0-∞ increases significantly (C_max of NS～ 586?±?5.91?ng/mL; plain RLP ～310?±?5. 74?ng/mL).

Conclusion: The approach offers a comfortable dosing zone for AIDs patients, negating the requirement of consuming the formulation in a fed state due to enhancement in drugs’ oral bioavailability.     

A Study of the Effects of Sucrose Concentration,Lacquer Concentration and Coating Time on the Formulation of Stable and Effective Carbenicillin Indanyl Sodium Microcapsules

Abstract

Carbenicillin indanyl sodium, commonly known as Geocillin (GC), is an orally effective derivative of carbenicillin employed in the treatment of gram negative infections of the urinary tract. GC exhibits an extremely bitter taste which affects patient compliance upon oral dosing (1). A novel coating approach allows Geocillin to be prepared as a suspension for oral administration. GC is available only as a tablet.

Eudragit E100^R [EE] is a tasteless, acid soluble cationic polymer. Encapsulation of GC with [EE] inhibited its release in the mouth, thus overcoming its bitter taste. Dissolution studies were carried out in simulated gastric fluid and simulated intestinal fluid. Three factors, viz. sucrose concentration, lacquer concentration and coating time were evaluated to arrive at an optimally acceptable formulation.

The formulation containing GC and sucrose in the ratio of 1:3, suspension coated using a 5% w/w lacquer solution for 40 mins. yielded taste free microcapsules with optimal release characteristics.     

In vitro and in vivo investigation of taste-masking effectiveness of Eudragit E PO as drug particle coating agent in orally disintegrating tablets

Abstract

Context: Considering that bitter taste of drugs incorporated in orally disintegrating tablets (ODTs) can be the main reason for avoiding drug therapy, it is of the utmost importance to achieve successful taste-masking. The evaluation of taste-masking effectiveness is still a major challenge.

Objective: The objective of this study was to mask bitter taste of the selected model drugs by drug particle coating with Eudragit^® E PO, as well as to evaluate taste-masking effectiveness of prepared ODTs using compendial dissolution testing, dissolution in the small-volume shake-flask assembly and trained human taste panel.

Materials and methods: Model drugs were coated in fluidized bed. Disintequik? ODT was used as a novel co-processed excipient for ODT preparation. Selected formulations were investigated in vitro and in vivo using techniques for taste-masking assessment.

Results and discussion: Significantly slower drug dissolution was observed from tablets with coated drug particles during the first 3?min of investigation. Results of in vivo taste-masking assessment demonstrated significant improvement in drug bitterness suppression in formulations with coated drug. Strong correlation between the results of drug dissolution in the small-volume shake-flask assembly and in vivo evaluation data was established (R?≥?0.970).

Conclusion: Drug particle coating with Eudragit^® E PO can be a suitable approach for bitter taste-masking. Strong correlation between in vivo and in vitro results implicate that small-volume dissolution method may be used as surrogate for human panel taste-masking assessment, in the case of physical taste-masking approach application.     

Potentials of proniosomes for improving the oral bioavailability of poorly water-soluble drugs

Objective: The objectives of this study were, first, to develop a free-flowing and stable proniosome formulation for poorly water-soluble drugs such as vinpocetine; and second, to estimate its bioavailability as oral drug delivery system.

Methods: The proniosomes consisting of span60, cholesterol, sorbitol and vinpocetine were prepared by a novel approach. After the proniosomes were contacted with water, the suspension of vinpocetine-loaded niosomes formed automatically. The proniosomes and reconstituted niosomes were evaluated for their physicochemical characteristics, in vitro drug dissolution and release, integrity and stability at different GI tract pH conditions, in situ single-pass intestinal perfusion and in vivo bioavailability.

Results: The proniosome powder exhibited excellent flowability. The reconstituted niosomes with high drug entrapment efficiency (89.67?±?3.28%) showed spherical morphology with smooth surface under transmission electron microscope (TEM). X-ray diffraction (XRD) indicated that the drug was in an amorphous or molecular state in proniosome powder. In vitro dissolution and release study, proniosomes did enhance the dissolution and release rate compared to vinpocetine suspension in phosphate buffer solution (pH 7.2). Proniosome-derived niosomes could keep their integrity and stability at different GI tract pH conditions. The in situ single-pass intestinal perfusion indicated that encapsulation of vinpocetine into niosomes could largely improved the absorption of vinpocetine. The AUC(0?∞) of F2 and F3 was about 4.0- and 4.9-fold higher than that of the vinpocetine suspension, respectively. The results demonstrated the proniosomes indeed remarkably enhanced the oral bioavailability of vinpocetine.

Conclusion: This study suggested the potential of proniosomes as stable precursors for the immediate preparation of niosome carrier systems.     

Enhancing the solubility and masking the bitter taste of propiverine using crystalline complex formation

Context: Patient compliance can be reduced when bitter-tasting compounds, such as propiverine hydrochloride, are administered orally. Propiverine hydrochloride is an example of a drug with a bitter taste, used for the treatment of overactive bladders.

Objective: This study tested whether propiverine free base palatability and aqueous solubility could be improved by crystalline complex formation.

Materials and methods: We used 42 compounds, and found 9 new propiverine crystalline complexes. The properties and solubility of these complexes were studied using a range of techniques. A taste perception study was carried out using a taste sensor to evaluate the taste masking ability of the crystalline complex formation.

Results: The melting points of the crystalline complexes were higher than that of propiverine. The dissolution rates of the crystalline complexes in aqueous buffer solution (pH 6.8) and in purified water were much faster than that of propiverine. Propiverine salicylic acid crystalline complex had substantially less bitterness than propiverine hydrochloride, which was extremely bitter.

Discussion: The present findings indicated that crystalline complex formation provided an effective approach to enhancing propiverine solubility, and to masking its bitter taste.

Conclusion: Crystalline complex formation represents a useful and valuable technique for the preparation of orally disintegrating tablets and improving patient compliance, even for substances with bitter tastes.     

Pharmacokinetic and pharmacodynamic studies of nisoldipine-loaded solid lipid nanoparticles developed by central composite design

Abstract

Objective: Nisoldipine (ND) is a potential antihypertensive drug with low oral bioavailability. The aim was to develop an optimal formulation of ND-loaded solid lipid nanoparticles (ND-SLNs) for improved oral bioavailability and pharmacodynamic effect by using a two-factor, three-level central composite design. Glyceryl trimyristate (Dynasan 114) and egg lecithin were selected as independent variables. Particle size (Y₁), PDI (Y₂) and entrapment efficiency (EE) (Y₃) of SLNs were selected as dependent response variables.

Methods: The ND-SLNs were prepared by hot homogenization followed by ultrasonication. The size, PDI, zeta potential, EE, assay, in vitro release and morphology of ND-SLNs were characterized. Further, the pharmacokinetic (PK) and pharmacodynamic behavior of ND-SLNs was evaluated in male Wistar rats.

Results: The optimal ND-SLN formulation had particle size of 104.4?±?2.13?nm, PDI of 0.241?±?0.02 and EE of 89.84?±?0.52%. The differential scanning calorimetry and X-ray diffraction analyses indicated that the drug incorporated into ND-SLNs was in amorphous form. The morphology of ND-SLNs was found to be nearly spherical by scanning electron microscopy. The optimized formulation was stable at refrigerated and room temperature for 3 months. PK studies showed that 2.17-fold increase in oral bioavailability when compared with a drug suspension. In pharmacodynamic studies, a significant reduction in the systolic blood pressure was observed, which sustained for a period of 36?h when compared with a controlled suspension.

Conclusion: Taken together, the results conclusively demonstrated that the developed optimal ND-SLNs caused significant enhancement in oral bioavailability along with pharmacodynamic effect.     

Buccoadhesive films for once-a-day administration of rivastigmine: systematic formulation development and pharmacokinetic evaluation

Context: Rivastigmine, an anti-Alzheimer’s drug, suffers from major predicaments like low oral bioavailability, severe GI adverse effects related to rapid fluctuations in drug plasma levels, and high frequency of dosing.

Objective: The present investigation aims at developing buccoadhesive films capable of delivering the drug in vivo in a sustained manner. Augmentation of drug bioavailability by the avoidance of first-pass effect through the buccal route and reduction in GI side effects would be other key advantages of this system.

Methods: Buccoadhesive films of rivastigmine were systematically designed and evaluated for in vitro drug release, ex vivo buccal permeation and ex vivo buccoadhesive strength. Optimal composition of the polymer blends was rationally chosen using a central composite design and overlay plot. In vivo pharmacokinetic studies were carried out in rabbits, and attempts were made to establish in vitro/ in vivo correlations (IVIVC).

Results: Besides possessing the requisite drug release regulation, the optimized formulation exhibited excellent buccoadhesion, and buccal permeation. Pharmacokinetic studies indicated extension of plasma drug levels and level A of IVIVC was successfully established.

Discussion: Excellent buccal bioadhesion and transmucosal permeation, coupled with drug release control, ratify the potential of the optimized formulation to deliver the drug in a controlled and site-specific manner. Successful establishment of IVIVC substantiated the judicious choice of in vitro dissolution media for simulating the in vivo conditions.

Conclusion: Besides unraveling the polymer synergism, the study helped in developing an optimal once-a-day buccoadhesive drug delivery system exhibiting excellent trans-buccal permeation and buccoadhesive characteristics with improved bioavailability potential.     

Solid self microemulsification of Atorvastatin using hydrophilic carriers: a design

Context: Atorvastatin has a limited advantage to formulate oral dosage forms.

Objective: To enhance the solubility of Atorvastatin and to design the suitable solid self-microemulsifying drug delivery systems (S-SMEDDS)

Materials and methods: The clear and transparent self-microemulsifying drug delivery system (SMEDDS) were formulated using coconut oil and isopropyl myristate as lipid phases; Tween 80 as surfactant; PEG 400 and glycerin as co-surfactant at 2:1, 3:1, 1:2 and 1:3 ratio. The pseudo ternary phase diagrams were constructed to identify the microemulsion region. The SMEDDS were evaluated for zeta potential, poly dispersity index, globule size, pH, viscosity and drug release. The solid SMEDDS were developed by employing adsorption and melt granulation methods. The S-SMEDDS were evaluated for micromeritics, morphology, solid state property, reconstitution ability, drug release and stability.

Results: The micro formulations formed with particle size of 25?nm had shown a 3-folds rise in drug release. The solid SMEDDS had reconstituted to a good microemulsion rapidly in 1–3?min, with a release of 94.62% at the end of 30?min and behaved as immediate releasing capsules. Their shelf-life was found to be 1.3 years.

Discussion: The 1:3 ratio SMEDDS had shown more drug release owing to their less particle size. The solid SMEDDS had shown an increased dissolution profiles than atorvastatin. The solid state of the drug had changed in formulation inferring their enhanced solubility.

Conclusion: The solid form of atorvastatin liquid SMEDDS had been formulated successfully with enhanced shelf life and solubility.     

In vitro and in vivo evaluation of cyclodextrin-based nanosponges for enhancing oral bioavailability of atorvastatin calcium

The aim of this study was to explore the feasibility of complexing the poorly water-soluble drug atorvastatin calcium (AC) with β-cyclodextrin (β-CD) based nanosponges (NS), which offer advantages of improving dissolution rate and eventually oral bioavailability. Blank NS were fabricated at first by reacting β-CD with the cross-linker carbonyldiimidazole at different molar ratios (1:2, 1:4, and 1:8), then NS of highest solubilization extent for AC were complexed with AC. AC loaded NS (AC-NS) were characterized for various physicochemical properties. Pharmacokinetic, pharmacodynamics and histological finding of AC-NS were performed in rats. The prepared AC-NS showed particles size ranged from 408.7?±?12.9 to 423?±?15.9?nm while zeta potential values varied from ?21.7?±?0.90 to ?22.7?±?0.85?mV. The loading capacity varied from 17.9?±?1.21 to 34.1?±?1.16%. DSC, FT–IR, and PXRD studies confirmed the complexation of AC with NS and amorphous state of the drug in the complex. AC-NS displayed a biphasic release pattern with increase in the dissolution rate of AC as compared to plain AC. Oral administration of AC-NS (1:4 w/w, drug: NS) to rats led to 2.13-folds increase in the bioavailability as compared to AC suspension. Pharmacodynamics studies in rats with fatty liver revealed significant reduction (p?in vivo performance of AC.     

Double-walled microspheres loaded with meglumine antimoniate: preparation,characterization and in vitro release study

Objective: The objective of this study was to fabricate double-walled poly(lactide-co-glycolide) (PLGA) microspheres to increase encapsulation efficiency and avoid rapid release of hydrophilic drugs such as meglumine antimoniate.

Methods: In this study, double-walled and one-layered microspheres of PLGA were prepared using the emulsion solvent evaporation technique to better control the release of a hydrophilic drug, meglumine antimoniate (Glucantime®), which is the first choice treatment of cutaneous leishmaniasis. The effect of hydrophobic coating on microspheres' size, morphology, encapsulation efficiency and drug release characteristics was evaluated. Furthermore, the presence of antimony in meglumine antimoniate made it possible to observe the drug distribution within the microspheres' cross section by means of energy dispersive X-ray spectroscopy.

Results: Drug distribution images confirmed accumulation of the drug within the inner core of double-walled microspheres. In addition, these microspheres encapsulated the drug more efficiently up to 87% and demonstrated reduced initial burst and prolonged release compared to one-layered microspheres. These superiorities make double-walled microspheres an optimum candidate for sustained delivery of hydrophilic drugs.

Conclusion: Double-walled microspheres provide some advantages over traditional microspheres overcoming most of their limitations. Double-walled microspheres were found to be more efficient than their corresponding one-layered microspheres in terms of encapsulation efficiencies and release characteristics.     

Evaluation of Spray-Drying as a Method to Prepare Microparticles for Controlled Drug Release

The possibility to obtain microcapsules or microspheres for controlled release by spray-drying is evaluated. Drugs of different solubilities like theophylline and sodium sulfamethazine, with Eudragit RS as coating polymer, are chosen.

The polymer is used, either dissolved in an hydroalcoholic solution or suspended (pseudolatex) in water, in different weight ratios with the drug. The obtained solution or suspension is spray-dried.

Scanning electron microscope analysis of the powders reveals no sign of microencapsulation. Moreover, only a fraction of the particles has a spherical shape.

For each spray-dried powder, a part of the obtained particles is compressed into tablets, and the rest is stored.

Dissolution studies in distilled water at 37 C are performed on powders and tablets.

While the uncompressed microparticles do not give any controlled release, the tablets show an ability in slowing down drug delivery greater than the one obtained with the traditional methods.     

Screening of ionically crosslinked chitosan-tripolyphosphate microspheres using Plackett–Burman factorial design for the treatment of intrapocket infections

Objective: Application of Plackett–Burman factorial design to investigate the effect of processing factors in the fabrication of ionically crosslinked chitosan-tripolyphosphate (CS-TPP) microspheres.

Significance: Microspheres were screened and optimized to provide maximum process yield (PY), encapsulation efficiency (EE), and time for 80% drug release (T_80%) and minimum burst and particles size (PS), for successful application in periodontitis.

Methods: Processing factors viz. method of preparation (MOP), CS, TPP, crosslinking time (CT), agitation (AS), and drying technique (DT) were selected. Solid state characterization was performed by Fourier-Transform infrared (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Mucoadhesion, cytocompatibility, and stability of microspheres were also evaluated.

Results: Pareto analysis and analysis of variance, screened most significantly (p?Staphylococcus aureus and Escherichia coli, cytocompatibility for L929 cells, and long-term stability.

Conclusions: Therefore, CS-TPP microspheres were found mucoadhesive, safe, stable and provided controlled and prolonged release of drugs. These properties confirmed its high potential and applicability in chronic periodontitis.     

Optimization of piribedil mucoadhesive tablets for efficient therapy of Parkinson’s disease: physical characterization and ex vivo drug permeation through buccal mucosa

Objective: The aim of this study was optimization of buccal piribedil (PR) mucoadhesive tablets to improve its low bioavailability and provide controlled release for the treatment of Parkinson’s disease.

Methods: Buccal tablets were prepared by direct compression method using carbomer (CP), carboxymethyl cellulose (CMC), and hydroxypropyl methylcellulose (HPMC) as mucoadhesive polymers. Physical properties of powder mixtures and buccal tablets were evaluated. Physicochemical compatibility between ingredients was investigated with infrared spectroscopy and differential scanning calorimetry analysis. In vitro dissolution profiles and drug release kinetics of buccal tablets were investigated. Mucoadhesion and ex vivo permeation studies were performed using sheep buccal mucosa.

Results: Powder mixtures demonstrated sufficient flow properties and physical characteristics of all tablet formulations were within compendia limits. Tablet ingredients were absent of any chemical interactions. CP tablets displayed slower drug release compared to HPMC tablets with zero order release, while CMC tablets lost their integrity and released entire drug after 6?h following Higuchi model. All formulations displayed adequate mucoadhesion and steady state flux of PR through buccal mucosa were higher with HPMC compared to CP-containing tablets.

Conclusion: Overall, HPMC was found to combine desired controlled release and mucoadhesion characteristics with sufficient pharmaceutical quality for optimization of buccal tablets. Piribedil mucoadhesive buccal tablets designed for the first time may introduce a new alternative for the treatment of Parkinson’s disease.     

Dual cross-linked chitosan microspheres formulated with spray-drying technique for the sustained release of levofloxacin

Objective: This study was aimed to develop sustained drug release from levofloxacin (LF)-loaded chitosan (CS) microspheres for treating ophthalmic infections.

Significance: Dual cross-linked CS microspheres developed by the spray-drying technique displays significantly higher level of sustained drug release compared with non-cross-linked CS microspheres.

Methods: LF-loaded CS microspheres were prepared using the spray-drying technique, and then solidified with tripolyphosphate and glutaraldehyde as dual cross-linking agents. The microspheres were characterized by surface morphology, size distribution, zeta potential, encapsulation efficiency, and drug release profiles in vitro. The drug quantification was verified and analyzed by high-performance liquid chromatography (HPLC). The structural interactions of the CS with LF were studied with Fourier transform infrared spectroscopy. The effect of various influencing excipients in the formulation of the dual cross-linked CS microspheres on drug encapsulation efficiency and the drug release profiles were extensively investigated.

Result: The microspheres demonstrated high encapsulation efficiency (72.4?～?98.55%) and were uniformly spherical with wrinkled surface. The mean particle size was between 1020.7?±?101.9 and 2381.2?±?101.6?nm. All microspheres were positively charged (zeta potential ranged from 31.1?±?1.32 to 42.81?±?1.55?mV). The in vitro release profiles showed a sustained release of the drug and it was remarkably influenced by the cross-linking process.

Conclusion: This novel spray-drying technique we have developed is suitable for manufacturing LF-loaded CS microspheres, and thus could serve as a potential platform for sustained drug release for effective therapeutic application in ocular infections.