Development of thiolated poly(acrylic acid) microparticles for the nasal administration of exenatide

The purpose of this study was to develop a microparticulate formulation for nasal delivery of exenatide utilizing a thiolated polymer. Poly(acrylic acid)-cysteine (PAA-cys) and unmodified PAA microparticles loaded with exenatide were prepared via coprecipitation of the drug and the polymer followed by micronization. Particle size, drug load and release of incorporated exenatide were evaluated. Permeation enhancing properties of the formulations were investigated on excised porcine respiratory mucosa. The viability of the mucosa was investigated by histological studies. Furthermore, ciliary beat frequency (CBF) studies were performed. Microparticles displayed a mean size of 70–80?µm. Drug encapsulation was ～80% for both thiolated and non-thiolated microparticles. Exenatide was released from both thiolated and non-thiolated particles in comparison to exenatide in buffer only within 40?min. As compared to exenatide dissolved in buffer only, non-thiolated and thiolated microparticles resulted in a 2.6- and 4.7-fold uptake, respectively. Histological studies performed before and after permeation studies showed that the mucosa is not damaged during permeation studies. CBF studies showed that the formulations were cilio-friendly. Based on these results, poly(acrylic acid)-cysteine-based microparticles seem to be a promising approach starting point for the nasal delivery of exenatide.     

Development and In Vitro Evaluation of Surface Modified Poly(lactide-co-glycolide) Nanoparticles with Chitosan-4-Thiobutylamidine

ABSTRACT

The objective of this study was to develop a nanoparticulate drug delivery system based on the surface modification of poly(lactide-co-glycolide) (PLGA) nanoparticles with a thiolated chitosan. PLGA nanoparticles were prepared by the emulsification-solvent evaporation method. Immobilization of chitosan to the surface of PLGA nanoparticles via amide bonds was mediated by a carbodiimide. Thiol groups were covalently bound to the chitosan surface of particles by reaction with 2-iminothiolane. Obtained nanoparticles were characterized in vitro regarding size, zeta potential, thiol group content, stability at different pH values, mucoadhesion, and drug release. Results demonstrated that the surface modification of PLGA nanoparticles with thiolated chitosan (chitosan-TBA) leads to nanoparticles of a mean diameter of 889.5 ± 72 nm and positive zeta potential of + 24.74 mV. The modified nanoparticles contained 7.32 ± 0.24 μmol thiol groups per gram nanoparticles. The size of nanoparticles was strongly influenced by the pH of the surrounding medium, being 925.0 ± 76.3 nm at pH 2 and 577.8 ± 66.7 nm at pH 7.4. Thiolated nanoparticles showed a 3.3-fold prolonged residence time on the mucosa and an unchanged release profile in comparison to unmodified PLGA nanoparticles. These data suggest that surface modified chitosan-TBA conjugate PLGA nanoparticles have the potential to be used as mucoadhesive drug delivery system.     

Phospholipid–polymer hybrid nanoparticle-mediated transfollicular delivery of quercetin: prospective implement for the treatment of androgenic alopecia

Abstract

Objectives: The aim of the study was to deliver effective doses of quercetin (Que) to the lower region of hair follicles (HFs) using the transfollicular route through dipalmotylphosphatidylcholine (DPPC)-reinforced poly lactide-co- glycolide nanoparticles (DPPC-PLGA hybrid NPs) for the treatment of alopecia.

Method: PLGA and DPPC-PLGA hybrid NPs were prepared by double-emulsification solvent evaporation method. NPs were characterized for size, shape, zeta potential entrapment and drug release. Drug-polymer interactions were determined by infrared spectroscopy (Fourier transform infrared spectroscopy, FTIR) and differential scanning calorimetry (DSC). Follicular uptake of fluorescent marker tagged NPs was assessed on isolated rat skin by fluorescent microscopy. Potential of hybrid NPs to induce hair regrowth was tested on testosterone-induced alopecia in rat models by visual inspection, hair follicular density measurement (no./mm), and histological skin tissue section studies.

Key findings: Hybrid NPs had mean vesicles size 339?±?1.6, zeta potential –32.6?±?0.51, and entrapment efficiency 78?±?5.5. Cumulative drug release after 12?h was found to be 47.27?±?0.79%. FTIR and DSC confirmed that drug was independently dispersed in the amorphous form in the polymer. Data from fluorescence microscopy suggested that NPs were actively taken up by HFs. In-vivo studies on alopecia-induced rat models showed that hybrid NPs improved hair regrowth potential of Que and accumulation of NPs at HFs end region inhibit HFs cells apoptosis.

Conclusion: This study concludes that phospholipid–polymer hybrid NPs could be the promising transfollicular delivery system for Que in the treatment of androgenic alopecia management.     

BÜCHI nano spray dryer B-90: a promising technology for the production of metformin hydrochloride-loaded alginate–gelatin nanoparticles

Abstract

The current study aimed to formulate gelatin/sodium alginate nanoparticles utilizing BÜCHI nano spray dryer B-90. Nanoparticles possess many of the advantages including new routes of drug administrations and sustained release properties. Utilizing B-90 technology, metformin hydrochloride (MET) nanoparticles were successfully developed. Preformulation studies such as atomization head mesh size, flow rate, head temperature, polymer viscosity, and surface tension, were adjusted. Additionally, post-formulation characters such as particle size, flowability, surface scan, and dissolution profiles, were evaluated. Spray head (7 µm hole), flow rate (3.5?ml/min) and head temperature (120?°C) were optimized. Polymer viscosity was less than 11.2 cP with a surface tension less than 70.1?dyne/cm. Moreover, anti-diabetic effects of MET formulations were evaluated in streptozotocin-induced diabetic rats. Here, discrete, non-aggregated free-flowing nanoparticle powders with a particle size less than 850?nm were generated. Gelatin/sodium-alginate (1:3) produced nanoparticles were successfully sustained by the in vitro release profile of the drug. In vivo evaluations of the previous formula showed a significant reduction of blood glucose level over 24?h. In conclusion, Nano Spray Dryer B-90 (Büchi Labortechnik AG, Flawil, Switzerland) offers a promising technology for nanoparticles formulation as controlled drug delivery systems enhancing compliance of type-II diabetic patients.     

Development and evaluation of buccoadhesive tablet for selegiline hydrochloride based on thiolated polycarbophil

Selegiline hydrochloride (SHCl), a monoamine oxidase B inhibitor, is used as an adjunct in the therapy of Parkinson’s disease. This study is concerned with the preparation and evaluation of mucoadhesive buccal tablet for controlled systemic delivery of SHCl. Buccal absorption of selegiline can bypass its first-pass metabolism and improve bioavailability accompanied by greatly reduced metabolite formation, which is potentially of enhanced therapeutic value in patients with Parkinson’s disease. Polycarbophil–cysteine (PCP–cys) conjugate, which is a thiolated derivative of the mucoadhesive polymer polycarbophil, was synthesized by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride-mediated amide bond coupling. Tablets of SHCl based on native and thiolated polycarbophil were prepared. The prepared tablets were evaluated for drug content, swelling behavior, mucoadhesive strength, in vitro drug release, ex vivo permeation and in vitro cytotoxicity. PCP–cys tablets showed enhanced mucoadhesion and retarded drug release compared to polycarbophil tablets. Permeation data of SHCl from matrices prepared using the PCP–cys polymer revealed a significantly higher value of apparent permeability in comparison to polycarbophil, which supported the information in literature that thiolation imparts permeation enhancing properties to mucoadhesive polymers. In vitro cytotoxicity studies on PCP–cys using L-929 mouse fibroblast cell line indicated that conjugation with cysteine does not impart any apparent toxicity to polycarbophil. The results from the study indicate that the buccal delivery of SHCl using thiolated polycarbophil tablet could provide a way for improved therapy of Parkinson’s disease.     

Cuboidal lipid polymer nanoparticles of rosuvastatin for oral delivery

The present work aimed to develop and characterize sustained release cuboidal lipid polymeric nanoparticles (LPN) of rosuvastatin calcium (ROS) by solvent emulsification-evaporation process. A three factor, two level (2³) full-factorial design was applied to study the effect of independent variables, i.e. amount of lipid, surfactant and polymer on dependent variables, i.e. percent entrapment efficiency and particle size. Optimized formulations were further studied for zeta potential, TEM, in vitro drug release and ex vivo intestinal permeability. Cuboidal nanoparticles exhibited average particle size 61.37?±?3.95?nm, entrapment efficiency 86.77?±?1.27% and zeta potential ?6.72?±?3.25?mV. Nanoparticles were lyophilized to improve physical stability and obtain free-flowing powder. Effect of type and concentration of cryoprotectant required to lyophilize nanoparticles was optimized using freeze-thaw cycles. Mannitol as cryoprotectant in concentration of 5-8% w/v was found to be optimal providing zeta potential ?20.4?±?4.63?mV. Lyophilized nanoparticles were characterized using FTIR, DSC, XRD and SEM. Absence of C=C and C–F aromatic stretch at 1548 and 1197?cm^?1, respectively, in LPN indicated coating of drug by lipid and polymer. In vitro diffusion of ROS using dialysis bag showed pH-independent sustained release of ROS from LPN in comparison to drug suspension. Intestinal permeability by non-everted gut sac model showed prolonged release of ROS from LPN owing to adhesion of polymer to mucus layer. In vivo absorption of ROS from LPN resulted in 3.95-fold increase in AUC_0–last and 7.87-fold increase in mean residence time compared to drug suspension. Furthermore modified tyloxapol-induced rat model demonstrated the potential of ROS-loaded LPN in reducing elevated lipid profile.     

Development of novel pH-sensitive nanoparticles loaded hydrogel for transdermal drug delivery

Objective: Difference of pH that exists between the skin surface and blood circulation can be exploited for transdermal delivery of drug molecules by loading drug into pH-sensitive polymer. Eudragit S100 (ES100), a pH-sensitive polymer having dissolution profile above pH 7.4, is used in oral, ocular, vaginal and topical delivery of drug molecules. However, pH-sensitive potential of this polymer has not been explored for transdermal delivery. The aim of this research work was to exploit the pH-sensitive potential of ES100 as a nanocarrier for transdermal delivery of model drug, that is, Piroxicam.

Methods: Simple nanoprecipitation technique was employed to prepare the nanoparticles and response surface quadratic model was applied to get an optimized formulation. The prepared nanoparticles were characterized and loaded into Carbopol 934 based hydrogel. In vitro release, ex vivo permeation and accelerated stability studies were carried out on the prepared formulation.

Results: Particles with an average size of 25–40?nm were obtained with an encapsulation efficiency of 88%. Release studies revealed that nanoparticles remained stable at acidic pH while sustained release with no initial burst effect was observed at pH 7.4 from the hydrogel. Permeation of these nanocarriers from hydrogel matrix showed significant permeation of Piroxicam through mice skin.

Conclusion: It can be concluded that ES100 based pH-sensitive nanoparticles have potential to be delivered through transdermal route.     

Development and gamma-scintigraphy study of Hibiscus rosasinensis polysaccharide-based microspheres for nasal drug delivery

Objective: This work describes the application of natural plant polysaccharide as pharmaceutical mucoadhesive excipients in delivery systems to reduce the clearance rate through nasal cavity.

Methods: Novel natural polysaccharide (Hibiscus rosasinensis)-based mucoadhesive microspheres were prepared by using emulsion crosslinking method for the delivery of rizatriptan benzoate (RB) through nasal route. Mucoadhesive microspheres were characterized for different parameters and nasal clearance of technetium-99m (^99mTc)-radiolabeled microspheres was determined by using gamma-scintigraphy.

Results: Their Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) studies showed that the drug was stable during preparation of microspheres. Aerodynamic diameter of microspheres was in the range 13.23?±?1.83–33.57?±?3.69?µm. Change in drug and polysaccharide ratio influenced the mucoadhesion, encapsulation efficiency and in-vitro release property. Scintigraphs taken at regular interval indicate that control solution was cleared rapidly from nasal cavity, whereas microspheres showed slower clearance (p?Conclusion: Natural polysaccharide-based microspheres achieved extended residence by minimizing effect of mucociliary clearance with opportunity of sustained delivery for longer duration.     

Design,characterization and ex vivo evaluation of chitosan film integrating of insulin nanoparticles composed of thiolated chitosan derivative for buccal delivery of insulin

The purpose of this study is to optimize and characterize of chitosan buccal film for delivery of insulin nanoparticles that were prepared from thiolated dimethyl ethyl chitosan (DMEC-Cys). Insulin nanoparticles composed of chitosan and dimethyl ethyl chitosan (DMEC) were also prepared as control groups. The release of insulin from nanoparticles was studied in vitro in phosphate buffer solution (PBS) pH 7.4. Optimization of chitosan buccal films has been carried out by central composite design (CCD) response surface methodology. Independent variables were different amounts of chitosan and glycerol as mucoadhesive polymer and plasticizer, respectively. Tensile strength and bioadhesion force were considered as dependent variables. Ex vivo study was performed on excised rabbit buccal mucosa. Optimized insulin nanoparticles were obtained with acceptable physicochemical properties. In vitro release profile of insulin nanoparticles revealed that the highest solubility of nanoparticles in aqueous media is related to DMEC-Cys nanoparticles. CCD showed that optimized buccal film containing 4% chitosan and 10% glycerol has 5.81?kg/mm² tensile strength and 2.47?N bioadhesion forces. Results of ex vivo study demonstrated that permeation of insulin nanoparticles through rabbit buccal mucosa is 17.1, 67.89 and 97.18% for chitosan, DMEC and DMEC-Cys nanoparticles, respectively. Thus, this study suggests that DMEC-Cys can act as a potential enhancer for buccal delivery of insulin.     

Chitosan based mucoadhesive nanoparticles of ketoconazole for bioavailability enhancement: formulation,optimization, in vitro and ex vivo evaluation

Purpose: The conventional dosage form of Ketoconazole (KZ) shows poor absorption due to rapid gastric emptying. Chitosan based mucoadhesive nanoparticles (NPs) of KZ were developed to efficiently release drug at its absorption window i.e. stomach and the site of action i.e. esophagus.

Method: The NPs were prepared by ionic gelation method. Concentration of polymer, cross-linking agent and ratio of drug/polymer as well as polymer/cross linking agent were optimized.

Results: NPs had 69.16?±?5.91% mucin binding efficiency, particle size of 382.6?±?2.384?nm, ζ potential of +48.1?mv and entrapment efficiency of 59.84 ± 1.088%. DSC thermogram indicated absence of any drug polymer interaction. The drug release was by controlled, non-fickian diffusion mechanism. Ex vivo diffusion studies were performed by emptying the stomach contents after 2?h to simulate in vivo gastric emptying. The results showed that drug diffusion from the solution across stomach mucosa stopped after emptying whereas that from the NPs continued upto 5?h. Hence we could conclude that the NPs must have adhered to the stomach mucosa and thereby would have been retained at this absorption site even after gastric emptying.

Conclusion: The orally delivered KZ loaded mucoadhesive NPs can be used as an efficient carrier for delivering drug at its absorption window i.e. the stomach and the site of action i.e. esophagus even after gastric emptying.     

Lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan as a new strategy for oral delivery of insulin: in vitro,ex vivo and in vivo characterizations

Objective: The purpose of this research was the development, in vitro, ex vivo and in vivo characterization of lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan.

Methods: Insulin nanoparticles were prepared from methylated N-(4-N,N-dimethylaminobenzyl), methylated N-(4 pyridinyl) and methylated N-(benzyl). Insulin nanoparticles containing non-modified chitosan and also trimethyl chiotsan (TMC) were also prepared as control. The effects of the freeze-drying process on physico-chemical properties of nanoparticles were investigated. The release of insulin from the nanoparticles was studied in vitro. The mechanism of the release of insulin from different types of nanoparticles was determined using curve fitting. The secondary structure of the insulin released from the nanoparticles was analyzed using circular dichroism and the cell cytotoxicity of nanoparticles on a Caco-2 cell line was determined. Ex vivo studies were performed on excised rat jejunum using Frantz diffusion cells. In vivo studies were performed on diabetic male Wistar rats and blood glucose level and insulin serum concentration were determined.

Results: Optimized nanoparticles with proper physico-chemical properties were obtained. The lyophilization process was found to cause a decrease in zeta potential and an increase in PdI as well as and a decrease in entrapment efficiency (EE%) and loading efficiency (LE%) but conservation in size of nanoparticles. Atomic force microscopy (AFM) images showed non-aggregated, stable and spherical to sub-spherical nanoparticles. The in vitro release study revealed higher release rates for lyophilized compared to non-lyophilized nanoparticles. Cytotoxicity studies on Caco-2 cells revealed no significant cytotoxicity for prepared nanoparticles after 3-h post-incubation but did show the concentration-dependent cytotoxicity after 24?h. The percentage of cumulative insulin determined from ex vivo studies was significantly higher in nanoparticles prepared from quaternized aromatic derivatives of chitosan. In vivo data showed significantly higher insulin intestinal absorption in nanoparticles prepared from methylated N-(4-N, N-dimethylaminobenzyl) chitosan nanoparticles compared to trimethyl chitosan.

Conclusion: These data obtained demonstrated that as the result of optimized physico-chemical properties, drug release rate, cytotoxicity profile, ex vivo permeation enhancement and increased in vivo absorption, nanoparticles prepared from N-aryl derivatives of chitosan can be considered as valuable method for the oral delivery of insulin.     

Development and evaluation of chitosan and chitosan derivative nanoparticles containing insulin for oral administration

Abstract

Chitosan and chitosan derivative-based nanoparticles loaded with insulin were prepared by self-assembly, via electrostatic interactions between the negatively charged drug and the positively charged polymers. In the investigated chitosan derivatives, the amine groups were substituted to different extents (33, 52 or 99%) by 2-hydroxypropyl-3-trimethyl ammonium groups, rendering the polymers permanently positively charged, irrespective of the pH. This is an important property for this type of advanced drug delivery system, since the pH value changes throughout the gastrointestinal tract and electrostatic interactions are of crucial importance for the stability of the nanoparticles. Permanent positive charges are also in favor of mucoadhesion. In contrast, the electric charges of chitosan molecules depend on the pH of the surrounding medium. Since the solubility of the chitosan derivatives increased due to the introduction of quaternary ammonium groups, sodium tripolyphosphate (TPP) was added to the systems to create supplementary cross-links and stabilize the nanoparticles. The presence of TPP influenced both the dissolution of the polymer matrix as well as the resulting release kinetics. The underlying drug release mechanisms were found to be more complex than simple diffusion under constant conditions, likely involving also ionic interactions and matrix dissolution. The most promising formulation was based on a chitosan derivative with 33% substitution degree and characterized by a Z-average of 142?±?10?nm, a zeta potential of 29?±?1?mV, an encapsulation efficacy of 52?±?3% and, most importantly, the release of insulin was sustained for more than 210?min.     

Optimization and characterization of gastroretentive floating drug delivery system using Box-Behnken design

Context: One among many strategies to prolong gastric residence time and improve local effect of the metronidazole in stomach to eradicate Helicobacter pylori in the treatment of peptic ulcer was floating drug delivery system particularly effervescent gastroretentive tablets.

Objective: The objective of this study was to prepare and evaluate, effervescent floating drug delivery system of a model drug, metronidazole.

Methods: Effervescent floating drug delivery tablets were prepared by wet granulation method. A three-factor, three levels Box-Behnken design was adopted for the optimization. The selected independent variables were amount of hydroxypropyl methylcellulose K 15M (X₁), sodium carboxy methylcellulose (X₂) and NaHCO₃ (X₃). The dependent variables were floating lag time (Y_FLT), cumulative percentage of metronidazole released at 6th h (Y₆) and cumulative percentage of metronidazole released at 12th h (Y₁₂). Physical properties, drug content, in vitro floating lag time, total floating time and drug release behavior were assessed.

Results: Y_FLT range was found to be from 1.02 to 12.07?min. The ranges of other responses, Y₆ and Y₁₂ were 25.72?±?2.85 to 77.14?±?3.42 % and 65.47?±?1.25 to 99.65?±?2.28 %, respectively. Stability studies revealed that no significant change in in vitro floating lag time, total floating time and drug release behavior before and after storage.

Conclusion: It can be concluded that a combination of hydroxypropyl methylcellulose K 15M, sodium carboxy methylcellulose and NaHCO₃ can be used to increase the gastric residence time of the dosage form to improve local effect of metronidazole.     

Preparation and IVIVC evaluation of salvianolic acid B micro-porous osmotic pump pellets

Purpose: Salvianolic acid B micro-porous osmotic pump controlled release pellets (SalB-CRPs) with suitable in vitro release profiles and good in vitro and in vivo correlation (IVIVC) were developed.

Method: Extrusion-spheronization was used to prepare the starter cores containing SalB/MCC/Kollidon®CL-SF/Flowlac®100 of 30:40:15:15 [w/w, The formulation composition of SalB immediate-release pellets (SalB-IRPs)] and complexed with lactose. The pellets were subsequently coated with Surelease aqueous dispersion to achieve controlled-release properties. Furthermore, a single-dose pharmacokinetics study was carried out in New Zealand White (NZW) rabbits.

Results: In the starter cores, the lactose content was 25% based on the SalB-IRPs constituent. The optimal coating polymer ratio of Surelease aqueous dispersion and polyvinyl alcohol–polyethylene glycol (PVA–PEG) graft copolymer (EC/PVA–PEG) was found to be 70:30 (w/w, %) with a coating weight of 5%. The prepared SalB-CRPs had similar in vitro release under three different pH release mediums. A good IVIVC was characterized by a high coefficient of determination (r?=?0.9801). The in vivo study indicated that the maximum plasma concentration (C_max) of SalB-CRPs was decreased, peak concentration time (T_max) and mean residence time (MRT) were all prolonged, as that of SalB-IRPs. In addition, the area under concentration–time curve from 0 to 24?h (AUC_0–24?h) and 0 to infinity (AUC_0–∞) were significantly higher, compared with those of SalB-IRPs.

Conclusion: Collectively, these results manifested that SalB-CRPs were likely to be a more suitable formulation in treating cardiovascular disease with improved in vivo retention, decreased plasma drug concentration fluctuation.     

PEGylated nanostructured lipid carriers (PEG–NLC) as a novel drug delivery system for biochanin A

With the aim to develop a lipid nanoparticle for biochanin A (BCA) by emulsion-evaporation and low temperature-solidification technique. The results revealed that BCA–PEG–NLC not only have small mean particle (148.5?±?2.88?nm) with narrow polydispersity index (PI) (0.153?±?0.01), encapsulation capacity (99.62?±?0.06%), payload (9.06?±?0.01%), zeta potential (?19.83?±?1.19?mV), but also slower release rate compared with BCA suspension over 48?h by the dialysis method (n=3). The crystallinity of lipid matrix within BCA–PEG–NLC was evaluated by differential scanning calorimetry (DSC) which verified the BCA successfully into the nanoparticles. Particularly, in pharmacokinetic, the BCA–PEG–NLC of C_max values and AUC (area under curve) was higher than BCA suspension (approximately 15.8 and 2.9 times, respectively), meanwhile, the mean residence time (MRT) was significantly longer. Furthermore, in vitro cytotoxicity BCA–PEG–NLC showed higher cytotoxicity against MCF-7 cell line compared with BCA suspension. This study suggested that PEG–NLC is a novel anti-cancer nanoparticle, which could provide attractive treatment for a wide variety of tumors and improved the oral bioavailability of poorly water-soluble drug.     

Preparation and characterization of mucoadhesive nanoparticles of poly (methyl vinyl ether-co-maleic anhydride) containing glycyrrhizic acid intended for vaginal administration

Traditional vaginal preparations reside in the vaginal cavity for relatively a short period of time, requiring multiple doses in order to attain the desired therapeutic effect. Therefore, mucoadhesive systems appear to be appropriate to prolong the residence time in the vaginal cavity. In the current study, mucoadhesive nanoparticles based on poly(methyl vinyl ether-co-maleic anhydride) (PVM/MA) intended for vaginal delivery of glycyrrhizic acid (GA) (a drug with well-known antiviral properties) were prepared and characterized. Nanoparticles were generated by a solvent displacement method. Incorporation of GA was performed during nanoprecipitation, followed by adsorption of drug once nanoparticles were formed. The prepared nanoparticles were characterized in terms of size, Z-potential, morphology, drug loading, interaction of GA with PVM/MA (by differential scanning calorimetry) and the in vitro interaction of nanoparticles with pig mucin (at two pH values, 3.6 and 5; with and without GA adsorbed). The preparation method led to nanoparticles of a mean diameter of 198.5?±?24.3?nm, zeta potential of ?44.8?±?2.8?mV and drug loading of 15.07?±?0.86?µg/mg polymer. The highest mucin interaction resulted at pH 3.6 for nanoparticles without GA adsorbed. The data obtained suggest the promise of using mucoadhesive nanoparticles of PVM/MA for intravaginal delivery of GA.     

Development of electrosprayed artesunate-loaded core–shell nanoparticles

Objective: Artesunate (ART) is proven to have potential anti-proliferative activities, but its instability and poor aqueous solubility limit its application as an anti-cancer drug. The present study was undertaken to develop coaxial electrospraying as a novel technique for fabricating nanoscale drug delivery systems of ART as the core–shell nanostructures.

Methods: The core–shell nanoparticles (NPs) were fabricated with coaxial electrospraying and the formation mechanisms of NPs were examined. The physical solid state and drug–polymer interactions of NPs were characterized by X-ray powder diffraction (XRPD) and Fourier transform infrared (FTIR) spectroscopy. The effects of materials and electrospraying process on the particle size and surface morphology of NPs were investigated by scanning electron microscopy (SEM). The drug release from NPs was determined in vitro by a dialysis method.

Results: The ART/poly(lactic-co-glycolic) acid (PLGA) chitosan (CS) NPs exhibited the mean particle size of 303?±?93?nm and relatively high entrapment efficiency (80.5%). The release pattern showed an initial rapid release within two hours followed by very slow extended release. The release pattern approached the Korsmeyer–Peppas model.

Conclusions: The present results suggest that the core–shell NPs containing PLGA and CS have a potential as carriers in the anticancer drug therapy of ART.     

Formulation and optimization of a novel oral fast dissolving film containing drug nanoparticles by Box–Behnken design–response surface methodology

Objective: The purpose of this study was to design and optimize a novel drug nanoparticles-loaded oral fast dissolving film (NP-OFDF) using Box–Behnken design–response surface methodology.

Methods: Drug nanosuspensions produced from high pressure homogenization were transformed into oral fast dissolving film containing drug nanoparticles by casting methods. Herpetrione (HPE), a novel and potent antiviral agent with poor water solubility that was extracted from Herpetospermum caudigerum, was studied as the model drug. The formulations of oral fast dissolving film containing HPE nanoparticles (HPE-NP-OFDF) were optimized by employing Box-Behnken design–response surface methodology and then systematically characterized.

Results: The optimized HPE-NP-OFDF was disintegrated in water within 20?s with reconstituted nanosuspensions particle size of 299.31?nm. Scanning electron microscopy (SEM) images showed that well-dispersed HPE nanoparticles with slight adhesion to each other were exposed on the surface of film or embedded in film. The X-ray diffractogram (XRD) analysis suggested that HPE in the HPE-NP-OFDF was in the amorphous state. In-vitro release study, approximate 77.23% of HPE was released from the HPE-NP-OFDF within 5?min, which was more than eight times compared with that of HPE raw materials (9.57%).

Conclusion: The optimized HPE-NP-OFDF exhibits much faster drug release rates compared to HPE raw material, which indicated that this novel NP-OFDF may provide a potential opportunity for oral delivery of drugs with poor water solubility.     

Lysozyme-loaded lipid-polymer hybrid nanoparticles: preparation,characterization and colloidal stability evaluation

Context: Lipid-polymer hybrid nanoparticles (LPNPs) are polymeric nanoparticles enveloped by lipid layers, which have emerged as a potent therapeutic nanocarrier alternative to liposomes and polymeric nanoparticles.

Objective: The aim of this work was to develop, characterize and evaluate LPNPs to deliver a model protein, lysozyme.

Materials and methods: Lysozyme-loaded LPNPs were prepared by using the modified w/o/w double-emulsion-solvent-evaporation method. Poly-?-caprolactone (PCL) was used as polymeric core material and tripalmitin:lechitin mixture was used to form a lipid shell around the LPNPs. LPNPs were evaluated for particle size distribution, zeta potential, morphology, encapsulation efficiency, in vitro drug release, stability and cytotoxicity.

Results: The DLS measurement results showed that the particle size of LPNPs ranged from 58.04?±?1.95?nm to 2009.00?±?0.52?nm. The AFM and TEM images of LPNPs demonstrate that LPNPs are spherical in shape. The protein-loading capacity of LPNPs ranged from 5.81% to 60.32%, depending on the formulation parameters. LPNPs displayed a biphasic drug release pattern with a burst release within 1?h, followed by sustained release afterward. Colloidal stability results of LPNPs in different media showed that particle size and zeta potential values of particles did not change significantly in all media except of FBS 100% for 120?h. Finally, the results of a cellular uptake study showed that LPNPs were significantly taken up by 83.3% in L929 cells.

Conclusion: We concluded that the LPNPs prepared with PCL as polymeric core material and tripalmitin:lechitin mixture as lipid shell should be a promising choice for protein delivery.     

Systematic aging of degradable nanosuspension ameliorates vibrating-mesh nebulizer performance

Context: The process of vibrating-mesh nebulization is affected by sample physicochemical properties. Exemplary, electrolyte supplementation of diverse formulations facilitated the delivery of adequate aerosols for deep lung deposition.

Objective: This study addressed the impact of storage conditions of poly(lactide-co-glycolide) nanosuspension on aerosol properties when nebulized by the eFlow®rapid.

Materials and methods: First, purified nanosuspensions were supplemented with electrolytes (i.e. sodium chloride, lactic and glycolic acid). Second, the degradable nanoparticles (NP) were incubated at different temperatures (i.e. 4, 22 and 36?°C) for up to two weeks. The effect of formulation supplementation and storage on aerosol characteristics was studied by laser diffraction and correlated with the sample conductivity.

Results and discussion: Nebulization of purified nanosuspensions resulted in droplet diameters of >7.0?µm. However, electrolyte supplementation and storage, which led to an increase in sample conductivity (>10–20?µS/cm), were capable of providing smaller droplet diameters during vibrating-mesh nebulization (≤5.0?µm). No relevant change of NP properties (i.e. size, morphology, remaining mass and molecular weight of the employed polymer) was observed when incubated at 22?°C for two weeks.

Conclusion: Sample aging is an alternative to electrolyte supplementation in order to ameliorate the aerosol characteristics of degradable NP formulations when nebulized by vibrating-mesh technology.