Activity of different zeolite-supported Ni catalysts for methane reforming with carbon dioxide

The catalytic performance of Ni based on various types of zeolites (zeolite A, zeolite X, zeolite Y, and ZSM-5) prepared by incipient wetness impregnation has been investigated for the catalytic carbon dioxide reforming of methane into synthesis gas at 700 °C, at atmospheric pressure, and at a CH₄/CO₂ ratio of 1. It was found that Ni/zeolite Y showed better catalytic performance than the other types of studied zeolites. In addition, the stability of the Ni/zeolite Y was greatly superior to that of the other catalysts. A weight of Ni loading at 7 wt.% showed the best catalytic activity on each zeolite support; however, the 7% Ni catalysts produced a higher amount of coke than that of two other Ni loadings, 3 and 5%.     

Methane reforming reaction with carbon dioxide over SBA-15 supported Ni-Mo bimetallic catalysts

A series of mesoporous molecular sieves SBA-15 supported Ni-Mo bimetallic catalysts (xMo1Ni, Ni = 12 wt.%, Mo/Ni atomic ratio = x, x = 0, 0.3, 0.5, 0.7) were prepared using co-impregnation method for carbon dioxide reforming of methane. The catalytic performance of these catalysts was investigated at 800 °C, atmospheric pressure, GHSV of 4000 ml·g_cat^− 1·h^− 1 and a V(CH₄)/(CO₂) ratio of 1 without dilute gas. The result indicated that the Ni-Mo bimetallic catalysts had a little lower initial activity compared with Ni monometallic catalyst, but it kept very stable performance under the reaction conditions. In addition, the Ni-Mo bimetallic catalyst with Mo/Ni atomic ratio of 0.5 showed high activity, superior stability and the lowest carbon deposition rate (0.00073g_c·g_cat^− 1·h^− 1) in 600-h time on stream. The catalysts were characterized by power X-ray diffraction, N₂-physisorption, H₂-TPR, CO₂-TPD, TG and TEM. The results indicate that the Ni-Mo bimetallic catalysts have smaller metal particle, higher metal dispersion, stronger basicity, metal-support interaction and Mo₂C species. It is concluded that Mo species in the Ni-Mo bimetallic catalysts play important roles in reducing effectively the amount of carbon deposition, especially the amount of shell-like carbon deposition.     

Improved resistance against coke deposition of titania supported cobalt and nickel bimetallic catalysts for carbon dioxide reforming of methane

The catalytic behavior of bi-metallic Co–Ni/TiO₂ catalysts for CO₂ reforming of CH₄ to synthesis gas was investigated under atmospheric pressure with a particular attention to carbon deposition. The catalysts with optimized Co/Ni ratios showed high catalytic stability towards the reaction with very little amount of deposited carbon at a wide range of reaction temperature (773–1123 K). The results suggest that adjusting of composition of the active metals (Co and Ni) can kinetically control the elementary steps (formation of carbon species and its removal by oxygen species) of CH₄/CO₂ reaction.     

MCM-41 supported PdNi catalysts for dry reforming of methane

A series of bimetallic PdNi catalysts supported on mesoporous MCM-41 with different Ni content (Ni/Si ratio of 0.2–0.4) was synthesized. The effect of Pd addition to Ni-containing catalysts as well as the effect of the Ni content on the surface and catalytic properties of the catalysts was studied. The samples were characterized using various techniques, such as energy-dispersive X-ray spectroscopy, N₂ adsorption–desorption isotherms, X-ray diffraction, thermogravimetric and differential analyses, X-ray photoelectron spectroscopy, high resolution transmission electron microscopy and temperature-programmed reduction. Reforming of methane with carbon dioxide was used as a test reaction. The results indicated that the addition of a small amount of Pd (0.5%) to Ni-containing catalysts leads to formation of small nano-sized, easy reducible NiO particles. Agglomeration of NiO as well as of metallic nickel phase over PdNi samples increased with increasing the Ni content. Formation of filamentous carbon over surface of spent monometallic Ni and bimetallic PdNi catalyst was observed. In spite of filamentous carbon deposition, the catalytic activity and stability of bimetallic PdNi catalysts are higher than those of monometallic Ni one. Within bimetallic system, the PdNi catalyst with Ni/Si ratio of 0.3 revealed the best performance and stability caused by presence of small nickel particles well dispersed on the catalyst surface.     

Effect of alkaline earth promoters (MgO,CaO, and BaO) on the activity and coke formation of Ni catalysts supported on nanocrystalline Al2O3 in dry reforming of methane

Ni/Al₂O₃ promoted catalysts with alkaline earth metal oxides (MgO, CaO, and BaO) were prepared and employed in dry reforming of methane (DRM). The catalysts were prepared by impregnation method and characterized by XRD, BET, TPR, TPO, and SEM techniques. The obtained results showed that the addition of MgO, CaO, and BaO as promoter decreased the surface area of catalysts (S_BET). The catalysis results exhibited that adding alkaline earth promoters (MgO, CaO, and BaO) enhanced the catalytic activity and the highest activity was observed for the MgO promoted catalyst. TPR analysis showed that addition of MgO increased the reducibility of nickel catalyst and decreased the reduction temperature of NiO species. The TPO analysis revealed that addition of promoters decreased the amount of deposited coke; and among the studied promoters, MgO has the most promotional effect for suppressing the carbon formation. SEM analysis confirmed the formation of whisker type carbon over the spent catalysts.     

Promotion of active nickel catalysts in methane dry reforming reaction by aluminum addition

Mixed LaNi_xAl_1−xO₃perovskite oxides have been prepared by a sol–gel related method and characterized by X-ray diffraction (XRD), specific surface area measurements and scanning electron microscopy (SEM) coupled to an energy dispersive X-ray spectrometer (EDS) shows the possibility to obtain a solid solution of LaNi_xAl_1−xO₃ (0.1x0.9) with propionic acid as solvent. These systems are highly efficient catalysts for syngas production in dry reforming of methane.     

Thermodynamic analysis of dry autothermal reforming of glycerol

Dry autothermal reforming of glycerol uses a combination of dry (CO₂) reforming and partial oxidation reactions to produce syngas rich product stream. Thermodynamic equilibrium data for dry autothermal reforming of glycerol was generated for temperature range 600-1000 K, 1 bar pressure, OCGR [feed O₂/C (C of glycerol only) ratio] 0.1 to 0.5 and CGR [feed CO₂/glycerol ratio] 1 to 5 and analyzed. The objective of the paper is to identify the thermodynamic domain of the process operation, study the variation of product distribution pattern and describe the optimum conditions to maximize yield of the desired product and minimize the undesired product formation. Higher OCGR and higher CGR yielded a syngas ratio (∼ 1), with lower carbon and methane formation, while lower CGR and lower OCGR yielded good hydrogen and total hydrogen, with low water and CO₂ production. The best thermoneutral condition for DATR of glycerol operation was seen at a temperature of 926.31 K at 1 bar pressure, OCGR = 0.3 and CGR = 1 that gave 2.67 mol of hydrogen, 4.8 mol of total hydrogen with negligible methane and carbon formations.     

Strontium carbonate supported cobalt catalyst for dry reforming of methane under pressure

Catalytic performance of Co–SrO catalyst for dry reforming of methane was investigated at 1 MPa, 1023 K. The catalyst prepared by oxalate co-precipitation method or citric acid method showed a steady activity for dry reforming of methane under pressure. The importance and stability of cobalt metal with strontium carbonate were suggested for the Co–SrO catalyst, and thus it should be denoted as Co–SrCO₃. In addition, cobalt supported on strontium carbonate prepared by impregnation method (Co/SrCO₃) showed the comparable activity with high tolerance to oxidative atmosphere under reaction conditions.     

Thermogravimetric analyses and catalytic behaviors of zirconia-supported nickel catalysts for carbon dioxide reforming of methane

Carbon dioxide reforming of methane has been performed over zirconia-supported nickel catalysts. Temperature-programmed surface reactions (TPSR) with CH₄ and CO₂ have also been investigated over the catalysts by means of thermogravimetric analysis technique to explore the behavior of carbon formation during the reaction. The effect of the modification of the zirconia support on supported Ni catalysts reveals that the ceria-doped zirconia support exhibits high catalyst stability against high temperature aging test as well as high resistance to coke formation. Moreover, simultaneous alteration of the support and Ni surface of Ni/ZrO₂ with a Ce modifier and a Ca promoter led to a high performance catalyst, Ni-Ca/Ce-ZrO₂, revealing high activity as well as high stability in the CO₂ reforming of methane.     

Evaluation of the economic and environmental impact of combining dry reforming with steam reforming of methane

Lately, there has been considerable interest in the development of more efficient processes to generate syngas, an intermediate in the production of fuels and chemicals, including methanol, dimethyl ether, ethylene, propylene and Fischer–Tropsch fuels. Steam methane reforming (SMR) is the most widely applied method of producing syngas from natural gas. Dry reforming of methane (DRM) is a process that uses waste carbon dioxide to produce syngas from natural gas. Dry reforming alone has not yet been implemented commercially; however, a combination of steam methane reforming and dry reforming of methane (SMR + DRM) has been used in industry for several years.     

Combined catalytic partial oxidation and CO2 reforming of methane over supported cobalt catalysts

The combined partial oxidation and CO₂ reforming of methane to synthesis gas was investigated over the reduced Co/MgO, Co/CaO, and Co/SiO₂ catalysts. Only Co/MgO has proved to be a highly efficient and stable catalyst. It provided about 94–95% yields to H₂ and CO at the high space velocity of 105000 mlg^–1h^–1 and for feed ratios CH₄/CO₂/O₂=4/2/1, without any deactivation for a period of study of 110 h. In contrast, the reduced Co/CaO and Co/SiO₂ provided no activity for the formation of H₂ and CO. The structure and reducibility of the calcined catalysts were examined using X-ray diffraction and temperature-programmed reduction, respectively. A solid solution of CoO and MgO, which was difficult to reduce, was identified in the 800°C calcined MgO-supported catalyst. The strong interactions induced by the formation of the solid solution are responsible for its superior activity in the combined reaction. The effects of reaction temperature, space velocity, and O₂/CO₂ ratio in the feed gases (while keeping the C/O ratio constant at 1/1) were investigated over the Co/MgO catalyst. The H₂/CO ratio in the product of the combined reaction increased with increasing O₂/CO₂ ratio in the feed.     

Carbon-free dry reforming of methane to syngas over NdCoO3 perovskite-type mixed metal oxide catalyst

CoNdO_x (Co/Nd = 1) is a highly promising catalyst for the carbon-free CO₂ reforming of methane. Influence of the Co/Nd ratio on the catalyst performance in the CO₂ reforming and also on the crystalline phases and reduction by temperature programmed reduction (TPR) of the CoNdO_x catalyst has also been investigated. The CoNdO_x (CoNd = 1.0) catalyst consisted of mainly NdCoO₃ perovskite-type mixed metal oxide and it showed not only a high resistance to carbon formation at different process conditions (viz. temperature = 750–900 °C and gas hourly space velocity (GHSV) = 10000–50000 cm³ g^–1 h^–1) but also high activity and selectivity in the CO₂ reforming process. The high resistance to carbon formation for this catalyst is attributed mostly to strong metal (Co°)–support (Nd₂O₃) interactions.     

Mechanistic aspects of carbon dioxide reforming of methane to synthesis gas over Ni catalysts

A study of the kinetic isotope effect (CH₄/CO₂ CD₄/CO₂) for carbon dioxide reforming of methane to synthesis gas shows that an isotope effect exists with k_{CH 4}/k_{CD 4} ratio of 1.05–1.97, depending on reaction temperature and catalyst applied. The attainment of stable performance over Ni/La₂O₃ catalyst is found to be related to the strong chemisorption of CO₂, weak chemisorption of CH₄ and slow rate of CH_x formation, and fast rate for CH_x removal by oxidation.     

CH4/CD4 isotope effects in the carbon dioxide reforming of methane to syngas over SiO2-supported nickel catalysts

By performing the CH₄ + CO₂ and CD₄ + CO₂ reactions alternately over SiO₂-supported nickel catalysts in a pulse micro-reactor, normal deuterium isotope effects on both the methane conversion reaction and on the CO formation reaction have been observed in the process of CO₂ reforming of methane. Based on the observed CH₄/CD₄ isotope effects, the pathways for the formation of CO are discussed.     

Stable carbon dioxide reforming of methane over modified Ni/Al2O3 catalysts

CO₂ reforming of methane was studied over modified Ni/Al₂O₃ catalysts. The metal modifiers were Co, Cu, Zr, Mn, Mo, Ti, Ag and Sn. Relative to unmodified Ni/Al₂O₃, catalysts modified with Co, Cu and Zr showed slightly improved activity, while other promoters reduced the activity of CO₂ reforming. Mn-promoted catalyst showed a remarkable reduction in coke deposition, while entailing only a small reduction in catalytic activity compared to unmodified catalyst. The catalysts prepared at high calcination temperatures showed higher activity than those prepared at low calcination temperature. The Mn-promoted catalyst showed very low coke deposition even in the absence of diluent gas and the activity changed only slightly during 100 h operation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Energy efficient methane-to-syngas conversion with low H2/CO ratio by simultaneous catalytic reactions of methane with carbon dioxide and oxygen

By simultaneous reactions of methane with CO₂ and O₂ over NiO-CaO catalyst under certain reaction conditions, it is possible to convert methane into syngas with low H₂/CO ratio (1 2/CO <2) at above 95% conversion, with 100% CO selectivity and above 90% H₂ selectivity and also with very high CO productivity without catalyst deactivation due to coking for a long period, in a most energy efficient and safe manner, requiring little or no external energy.     

甲烷二氧化碳重整镍基催化剂的研究

采用浸渍法制备不同组成催化剂Ni-M/γ-Al₂O₃（M=Zr、Co、Mg、Nd）,通过固定床反应装置考察不同助剂、助剂含量和反应温度对催化剂活性的影响,并对催化剂进行X射线衍射表征。结果表明,14Ni-5Mg/γ-Al₂O₃的催化活性较好,随着反应温度的升高,甲烷转化率和CO收率均升高,反应温度升至800 ℃时,甲烷转化率达97.54%。采用共沉淀法制备载体、浸渍法制备的催化剂14Ni/MgO-Al₂O₃,在反应温度800 ℃、压力1.013 kPa、n(CO₂)∶n(CH₄)=1.2和催化剂用量0.5 g条件下,CO收率高于14Ni-5Mg/γ-Al₂O₃催化剂,但甲烷转化率略低。     

Effects of preparation methods on the properties of cobalt/carbon catalyst for methane reforming with carbon dioxide to syngas

The effect of different preparation methods on the physicochemical property, reforming reactivity, stability and carbon deposition resistance of cobalt/carbon catalyst was investigated through fixed bed flow reaction. The catalysts were prepared by the impregnation and characterized by the XRD and scanning electron microscopy (SEM). The result indicated that the active components of cobalt/carbon catalyst prepared by using ultrasonic wave distributed evenly, activity was high and the loading time was short. The Co/Carbon catalyst prepared by incipient-wetness impregnation, 10 wt% loading and 300 °C calcination, achieved the best activity. Furthermore, the effect of reaction temperature, air speed and CH₄/CO₂ ratio on the catalyst activity and CO/H₂ ratio in products was investigated. It was found that the conversion of CO₂ and CH₄ increased with the increasing of reaction temperature. However, the conversion of CO₂ and CH₄ increased first and then decreased with the increasing of air speed. With the increasing of CH₄/CO₂ in feed gas, both the catalyst activity and the CO/H₂ ratio in products decreased.     

Cobalt–magnesia catalyst by oxalate co-precipitation method for dry reforming of methane under pressure

Catalytic performance of cobalt–magnesia catalyst prepared by oxalate co-precipitation method (Co–MgO) was investigated for dry reforming of methane at 1 MPa, 1023 K. Co–MgO (7 mol% Co) showed stable activity at such high space velocity as 400,000 cm³ h⁻¹ g⁻¹ whereas reactor was plugged during the reforming reaction with 10 mol% Co–MgO, and the activity of Co–MgO with Co content less than 6 mol% gradually decreased by the oxidation of cobalt species. Well-balanced cobalt content is essential for high and stable activity.     

非金属氮掺杂活性炭催化剂制备及其催化CH4-CO2重整反应

采用硝酸和尿素联合对活性炭进行改性,制备了富含氮元素的氮掺杂活性炭,考察了孔结构、氮含量和氮种类（吡啶氮、吡咯氮和石墨氮）对CH₄-CO₂重整反应催化性能的影响。采用BET、SEM、EA、FTIR、XPS、CO₂-TPD和TG表征手段对反应前后催化剂的物理化学性质进行了表征,对引入活性炭表面的含氮官能团的种类及其在重整过程中所起的作用进行了分析。相比于未改性的原活性炭,硝酸和尿素同时改性制备的氮掺杂活性炭（AC-U.NA）引入了更多的羟基官能团和含氮官能团。特别是通过两者共同改性后,所制备的氮掺杂活性炭引入的吡啶氮官能团比例明显提高,为CH₄-CO₂重整反应提供了更多的活性位点,初始CH₄和CO₂转化率达到55.94%和66.46%。同时经过两者联合改性后,所制备的AC-U.NA材料表面具有极性,不仅有利于酸性CO₂分子的吸附和活化,而且有利于CO₂消碳反应,减少了积炭的生成,对所制备的非金属重整催化剂的活性和抗积炭性具有重要的意义。