共查询到20条相似文献,搜索用时 62 毫秒
1.
本文说明了传统留银声迹还音的基本原理和缺点;介绍了向青染料声迹和红光还音转换的方法和步骤;阐述了染料声迹和红光还音技术的开发、研究与应用;概述了美国电影业实施转换的整个过程;介绍了我国红光还音的进展;最后提出了结论和建议供业界参考。 相似文献
2.
背景为了保证电影声迹在未来的某个时间转换为青染料声迹和提高模拟还音头的质量与可靠性,杜比实验公司为放映机制造厂设计和提供了红光LED照明光源。目前这种装置已安装了数千套,大部分装备在新的放映机上并应用在电影院中。转换为青染料声迹的可能性由于采用红光光源而得以实现,这是杜比公司、柯达公司和特艺色公司在联合项目中获得的成果,并得到美国大多数电影公司和洗印厂的支持。尽管最终会全部安装红光还音头以保证电影声迹转为青染料声迹,但目前我们却处于过渡阶段,还需要保留使用传统的银质声迹。这个阶段的缺点是由于使用… 相似文献
3.
从20世纪90年代,杜比实验室的工程师们提出用新的红光光源来识读青染料声迹之后,好莱坞为此专门成立了电影行业组织——染料声迹委员会,在全世界全力推动青染料声迹的普及和红光还音的有序转换开始,至今已经过去了十几个年头。 相似文献
4.
本文较详细地叙述了从标准的再显影声迹、高品红染料声迹转换到青染料无银声迹的过程中所涉及的技术和设备。包括声迹的还音、红光LED的类型及在制作声迹时声底、声正的密度确定、印片滤色片的选用等。 相似文献
5.
本文较详细地叙述了从标准的再显影声迹、高品红染料声迹转换到青染料无银声迹的过程中所涉及的技术和设备。包括声迹的还音、红光LED的类型及在制作声迹时声底、声正的密度确定、印片滤色片的选用等。 相似文献
6.
推广青染料无银模拟声迹和红光还音主要是为了解决洗印厂的环保问题,并能降低制作成本,同时还可以提高影院的还音质量。制作声迹使用的印片滤色片应采用专用的红色滤色片,并在ECP-2D工艺加工,声迹不必进行再显影。确定声底和声正的最佳目标密度值,必须通过交叉调幅对消分贝的测试而定。在实际生产中,声迹只控制青染料密度值,密度值允许误差±0.10。青染料无银模拟声迹只能由红光还音,如果用白光还音,信号电平会低于-12dB。本文主要从6个方面对35mm电影发行拷贝青染料无银模拟声迹的制作技术进行了较详细的分析。 相似文献
7.
8.
在杜比公司于 90年代初成功地将数字声迹印制在胶片的染料层上之后 ,为了降低 SR· D还音系统的制片成本 ,还研制出了可以同时读取数字声迹和模拟声迹的双红光还音头。由于红光还音头不仅可以读取银质声迹 ,同时也可以读取无银染料声迹 ,因此 ,使得人们想到能否把无银声迹也印制到胶片的染料层上 ,从而省掉拷贝声迹制做过程中留银的再显影工艺。这样 ,既可简化制片工艺、降低制做成本 ,又能减少污染 ,促进电影行业对环境的保护。为此 ,杜比 (Dolby)、柯达 (Kodak)以及特艺色 (Technicolor)等公司联合发起和成立了“染料声迹委员会 (Dye … 相似文献
9.
由于环境保护的原因和要求 ,胶片电影正逐步从留银染料声迹和少量留银的高品红声迹向无银青染料声迹过渡。白炽灯光源组成的激励还音系统对青染料声迹带还音效果极差 ,所以白炽灯光源组成的激励还音系统将被红光组成的激励还音系统所替代。目前 ,国内所用的红光激励还音系统大都采用杜比公司的产品。它是由LED红光管、隙缝、光电池、信号放大器及“专用电源”组成的后置式激励还音系统 ,既满足数码还音(SR/D)的要求 ,也可用于普通声及模拟 (SR )立体声的还音。我公司近年来所生产的放映机均采用白炽灯光源组成的前置式激励还音系统 ,如… 相似文献
10.
为了满足环保的需要,并与国际接轨,我国电影拷贝的留银声迹向青染料声迹过渡已势在必行。青染料声迹拷贝要求放映机必须采用红光还音。因此,从2002年开始,我国各家35mm固定放映机生产厂都推出新机型,对放映机的还音系统重新设计,全部将白光还音改为红光还音,推动了我国电影放映技术的进步。但另一方面,我国城乡还有大量旧型放映机,它们又怎样去适应这一发展形势呢? 相似文献
11.
12.
13.
Yongkang Chen Mike Bacich Cory Nardin Albert Sitorus Mark M. Weislogel 《Microgravity science and technology》2005,17(4):14-24
The behavior of wall-bound drops and bubbles is fundamental to many natural and industrial processes. Key characteristics
of such capillary systems include interface shape and stability for a variety of gravity levels and orientations. Significant
solutions are in hand for axisymmetric pendent drops for a variety of uniform boundary conditions along the contact line with
gravity acting normal to a planar wall. The special case of a wall-bound drop or bubble that is also pinned at an edge (i.e.
a ‘wall-edge-bound’ drop) is considered here where numerical solutions are obtained for interface shape and stability as functions
of drop volume, contact angle, fluid properties, and uniform gravity vector. For a semi-infinite zero-thickness planar wall
(plate), a critical contact angle is identified below which wall-edge-bound drops are always stable. The critical contact
angle is computed as a function of the gravity vector. The numerical procedure, which makes no account for contact angle hysteresis,
predicts that such wall-edge-bound drops are unconditionally unstable for any gravity field with a component that is tangent
to the wall while inwardly normal to the edge. Select experiments are conducted that support the conclusions drawn from the
numerical results. 相似文献
14.
15.
《Measurement Techniques》1975,18(12):1719-1725
16.
We have synthesized a variety of alkali-metal and ammonium fluorosulfatometallates (titanates, zirconates, and hafnates). The alkali fluorosulfatozirconates and fluorosulfatohafnates have been shown to exhibit efficient roentgenoluminescence (RL) in the UV through visible spectral region, with a maximum at 390–440 nm. Their RL spectra depend significantly on their composition (cation, anion, and water content), coordination of KF and K2SO4, and relative amounts of fluorine and SO4 groups. We have examined the effect of heat treatment on the RL of these compounds. The rubidium and cesium fluorosulfatozirconates Rb3Zr2F9SO4 · 2H2O, Cs2ZrF2(SO4)2 · 2H2O, Cs8Zr4F2(SO4)11 · 16H2O, and Cs2ZrF4SO4 offer the most efficient RL. 相似文献
17.
18.
19.
热交换器是将不同温度介质之间的热量通过热传导的形式,由高温介质传递给低温介质,使介质达到生产所需温度的工艺设备,也可作为一种节能设备使用.通过对不同热交换器的结构分析,总结不同热交换器的优缺点、适用环境,为生产工艺设计人员及设备制造单位在选择可降低能耗、提高效率的设备上提供参考. 相似文献
20.
A. M. Grishin 《Journal of Engineering Physics and Thermophysics》2001,74(4):895-903
Basic definitions and concepts of the physicomathematical theory of natural catastrophes are given. Possibilities of mathematical modeling of natural and technogenic catastrophes are discussed in the context of the theory of heat and mass transfer and the mechanics of reacting media. The importance of taking into account conjugate heat and mass exchange in modeling catastrophes is emphasized. A formula for evaluating the probability of a collisional catastrophe is given. 相似文献