Intensity-referenced and temperature-independent curvature-sensing concept based on chirped fiber Bragg gratings

An intensity-referenced temperature-independent curvature-measurement technique that uses a smart composite that comprises two chirped fiber Bragg gratings is demonstrated. The two gratings are embedded on opposite sides of the composite laminate and act simultaneously as curvature sensors and as wavelength discriminators, enabling a temperature-independent intensity-based scheme to measure radius of curvature. Also, the system's performance is independent of arbitrary power losses that are induced in the lead fibers to the sensing head. It is demonstrated that the measurement range depends on the relative positions of the chirped fiber Bragg gratings and on their spectral bandwidths. By using two chirped fiber Bragg gratings with bandwidths W1 = 2.8 nm and W2 = 3.7 nm and with central wavelengths at lambda 01 = 1560.3 nm and lambda 02 = 1563.7 nm, we obtained a resolution of 1.6 mm/square root of Hz for the measurement of the radius of curvature (approximately R = 350 mm) over the measurement range 190 mm < R < infinity.     

Distributed measurement of static strain in an optical fiber with multiple bragg gratings at nominally equal wavelengths

The Fourier transform relationship between the reflected light froma Bragg grating and the complex spatial modulation of the Bragg grating is used to produce a distributed strain sensing system. A tunable external cavity diode laser along with a reference reflector in anoptical fiber are used to produce a measurement of the phase and amplitude of the reflected light from the modulated Bragg grating as a function of wavelength. The system is demonstrated with 22 Bragg gratings in a single fiber on a cantilever beam and compared with foil strain gauge readings.     

温度应变同时测量的光纤光栅系统的研究

为了同时传感温度和应变,在同一根光纤的两个不同地方写入相同的Bragg光栅,设计制成一种特殊机构的传感系统。由于测量结构特殊,两处光纤光栅的反射峰具有成比例的应变响应系数和不同的温度响应,测出温度后,应变也同时算出。实际测量表明,该系统结构简单,测量精度高,能进行实时测量。     

Strain and damage monitoring of CFRP in impact loading using a fiber Bragg grating sensor system

A fiber-optic system featuring strain measurement and ultrasonic detection was constructed with fiber Bragg gratings based on wavelength–light intensity conversion technique. This fiber Bragg grating sensing system consists of a broadband light source, a broadband optical filter for strain measurement and a narrowband tunable filter for ultrasonic detection. The system was applied to strain measurement in impact loading to carbon fiber-reinforced plastics and the subsequent impact damage detection. Experimental results demonstrated that fiber Bragg grating sensors could measure strain with higher resolution compared with conventional strain gauges. Furthermore, ultrasonic inspection in which ultrasonic sensitivity was maximized by controlling the transmissive wavelength of the tunable filter could detect a 6.3 × 9 mm² impact damage.     

Hybrid Wavelength-Time-Domain Interrogation System for Multiplexed Fiber Bragg Sensors Using a Strain-Tuned Erbium-Doped Fiber Laser

A system for the interrogation of fiber Bragg grating (FBG) sensors using a strain-tuned EDF laser with linear cavity is described. An optical switch is spliced to one end of the laser cavity and connects one of two high-strength draw-tower fiber Bragg gratings (DTGs). The gratings are simultaneously tuned by a stretching device and act as the end reflector of the laser cavity. By applying a ramp signal to the actuator synchronized to the optical switch, the laser signal sweeps over two different wavelength intervals, depending on the connected DTG. This approach represents a hybrid wavelength-time-domain interrogation for multiplexed sensors and doubles the number of sensors that may be addressed when compared with single DTG scanning. In addition, the use of the DTG allows a fivefold increase in the strain tuned wavelength interval over standard fiber Bragg gratings. An example application is demonstrated where temperature inside an electrical motor is measured during operation.     

Femtosecond laser-inscribed fiber Bragg gratings for strain monitoring in power cables of offshore wind turbines

A fiber Bragg grating sensor system used for monitoring the effects of strain on the power cable of an offshore wind turbine is presented. The Bragg grating structure was inscribed into coated nonphotosensitive standard telecommunication fibers using an IR femtosecond laser and the point-by-point writing technique. Because of the presence of the protective coating of the fiber, the mechanical stability of the resultant sensor device is better than that of a sensor consisting of a bare fiber. A system containing this sensing element was to our knowledge for the first time successfully installed and tested in an offshore wind turbine prototype (REpower 6M, REpower Systems, AG, Germany) in February 2010, near Ellh?ft (Germany). The fabrication process of the fiber Bragg gratings, measurement results of the online monitoring, and a comparison between the sensor signal and commonly used sensing techniques are presented.     

Fiber-Bragg-grating force sensor based on a wavelength-switching actively mode-locked erbium-doped fiber laser

A fiber-Bragg-grating (FBG) transverse-force sensor based on a wavelength-switching actively mode-locked erbium-doped fiber laser is proposed, in which a FBG is used as both the sensing element and the wavelength-selection element of the laser. When a force is applied to the FBG, the induced birefringence in the FBG causes the laser to emit pulses at two close wavelengths, whose separation is proportional to the applied force. To suppress the interference between the two wavelengths, the laser is made to emit at the two wavelengths alternately by use of a polarization-switching technique. The wavelength separation is converted into a time difference by transmission of the laser pulses through a dispersive single-mode fiber, so the wavelength measurement is replaced by the less-expensive time measurement. The output of the sensor is insensitive to temperature and axial strain changes along the FBG. To interrogate similar FBG sensing elements connected in series it is necessary only to change the modulating frequency of an electro-optic modulator to select the corresponding laser cavity. The practicability of this approach was demonstrated experimentally with two multiplexed sensing elements.     

Simultaneous determination of curvature,plane of curvature,and temperature by use of a miniaturized sensing head based on fiber Bragg gratings

We present what we believe to be a novel miniaturized sensor configuration based on fiber Bragg gratings for simultaneous measurement of curvature and temperature in smart structures and composite materials. Because of the particular geometry of the sensing head, it is possible not only to measure the radius of curvature but also to determine the plane of curvature. We arrange three Bragg gratings in the vertices of the smallest equilateral triangle that can be defined by the cross sections of the fibers. The set is then inserted into a glue-filled capillary stainless-steel tube to provide both suitable protection for the Bragg sensors and rotational symmetry to the sensing head. This tube also ensures isolation from axial strain, allowing for the additional determination of temperature. The proposed sensing head is particularly well suited for applications in smart structures because it can be embedded along any layer of a composite material (including the neutral line) without special concern for the relative orientation of the Bragg gratings and the composite layers. We can also use this sensing configuration to implement more-sophisticated sensors dedicated, for example, to the measurement of multiaxial acceleration or flow and temperature.     

Pressure Vessel Wall Thinning Detection Using Multiple Pairs of Fiber Bragg Gratings For Unbalanced Strain Measurements

This paper proposes a method for using a pair of identical fiber Bragg gratings to measure the unbalanced strain factor in an isothermal-mechanical system. Cascading two identical fiber Bragg gratings, the unbalanced strain factor caused by the disturbance can be interrogated from the peak difference of the two reflecting Bragg wavelengths. If the mechanical system is in an isothermal environment, the thermal variations in the Bragg grating detection system can be automatically compensated. To verify the feasibility of the unbalanced strain detection using a pair of fiber Bragg gratings, the wall-thinning monitor in a pressure vessel system was investigated. The proposed technique is easy to install, immune to electro-magnetic and thermal interference, and highly sensitive in-time to remote monitoring for fiber optic smart structures.A finite element model (FEM) is used to simulate the wall thinning in a pressure vessel system. The minimum detectable unbalanced strain and cross-talk between two reflecting Bragg wavelengths were investigated.ROC Revised for Journal of Nondestructive Evaluation, 2000     

Intracore fiber bragg gratings for strain measurement in embedded composite structures

An intracore Bragg grating written on a photosensitive fiber core is used for strain measurement in composite specimens under load. The strain information is directly related to the absolute change in the Bragg-reflected wavelength. Fiber Bragg grating (FBG) sensors (fibers with intracore gratings) are thus sensitive to strain that is caused by changes in temperature as well as to load-induced changes. Thus these sensors can be made to be independent of source intensity variations and losses. FBG sensors used for load-induced strain sensing in composite structures and the effects of temperature on them are discussed. A detailed account of the use of such embedded structures as self-monitoring nondestructive testing devices is given.     

光纤Bragg光栅用于动态应变测试的研究进展

应变测量是光纤光栅的主要应用之一。概述了光纤Bragg光栅（FBG）在不同时期和领域用于动态应 变测试的研究进展;阐述了传感头、信号的解调方法和工程应用;评述了基于光纤Bragg光栅的动态应变测试方 法和解调技术;比较了各自的优缺点和目前所能达到的测试范围     

Bragg intragrating structural sensing

When a fiber-optic intracore Bragg grating is subject to an appreciable strain gradient, its reflective spectrum will not only be shifted but also be distorted because of the chirp of the grating. We employed the J-matrix formalism to calculate the influence of different strain gradients on the reflective spectra of Bragg gratings and have undertaken experiments to test these calculations. The results of these experiments have confirmed that intracore Bragg gratings can be used to evaluate strain gradients and can be thought of as quasi-distributed strain sensors. This adds a new dimension to structural sensing, permitting measurements in any situation where strain gradients exist. It also provides a warning of any sensor/host debonding.     

A field deployable, multiplexed Bragg grating sensor system used in an extensive highway bridge monitoring evaluation tests

A multiplexed optical fiber Bragg grating sensor system with a measurement bandwidth of up to 200 Hz enabling dynamic loading events, e.g., road traffic, to be observed has been designed, installed, and tested over an 18-month period on a 346-m road bridge in Norway, for design verification and structural integrity monitoring purposes. A network of 32 fiber Bragg sensors was surface bonded along with a corresponding set of resistive strain gauges for comparative tests to be made. The wavelength data were calibrated against two thermally stabilized (/spl sim/0.15 pm) reference gratings, which rejected common mode noise and provided absolute wavelength scaling. These data provides independent strain and temperature information. Long-term test results showed good linearity and repeatability of <10 /spl mu//spl epsiv/ over the test period with a precision of /spl plusmn/5 /spl mu//spl epsiv/ and a resolution of /spl plusmn/1 /spl mu//spl epsiv/. The readings from the FBG sensors were comparable to those from the foil gauge sensors to within /spl plusmn/4 /spl mu//spl epsiv/.     

Multiplexed Long-Base Flexible Optical Fiber Extensometers and Temperature Bragg Sensors Interrogated by Low-Coherence Interferometry

We present a novel concept of quasi-distributed flexible optical fiber extensometers fully compensated from thermal variations. Developed for structural health monitoring applications, the sensors are composed of a combination of intrinsic Fabry-Perot cavities as long-base extensometers, and point-like Bragg gratings inserted along the same fiber used as temperature sensors. This configuration enables a high degree of multiplexing, thus quasi-distributed sensing, and very efficient temperature compensation. Both types of sensors are read by a fiber-optic low-coherence interferometer, used in an original way to measure simultaneously the length variations of the cavities and the wavelength shifts of the Bragg gratings. Finally, we present the experimental validation of the whole measurement system, suitable for concrete structures instrumentation, as it includes an original optical fiber sheath packaging the optical fiber as a flexible sensor.     

Fiber grating sensing interrogation based on an InGaAs photodiode linear array

We present a new method of the fiber grating sensing interrogation technique by utilizing an indium gallium arsenide photodiode linear array and blazed fiber Bragg gratings. An interrogation system based on an InGaAs photodiode linear array is designed, and the system performance is analyzed. The interrogation system shows a good prospect for smart sensing.     

Dual temperature and strain measurement with the combined fluorescence lifetime and Bragg wavelength shift approach in doped optical fiber

We have constructed fiber-optic sensors to measure temperature and strain by combining the properties of fiber Bragg gratings with the fluorescent lifetimes of various doped fibers. Sensors have been made with the fiber Bragg grating written directly into the doped fiber to ensure the collocation of the strain and temperature measurement points. Results are compared with those obtained previously from a Bragg grating written into standard photosensitive fiber spliced to doped fiber. Standard deviation errors of 7 microepsilon and 0.8 degrees C have been obtained for strain and temperature ranges of up to 1860 microepsilon and 120 degrees C, respectively.     

Cavity-ring-down principle for fiber-optic resonators: experimental realization of bending loss and evanescent-field sensing

A novel measurement principle for fiber-optic sensing is presented. Use of a cavity-ring-down scheme enables measurements of minute optical losses in high-finesse fiber-optic cavities. The loss may be induced by evanescent-field absorption, fiber bending, fiber degradation, Bragg gratings, or any other effect that might change the fiber transmission or cavity reflector properties. The principle is proved to be rather insensitive to ambient perturbations such as temperature changes. A high-sensitivity measurement of loss due to bending is presented as a proof-of-principle. With a cavity finesse of 627 a sensitivity for induced loss of 108 ppm (4.68 x 10(-4) dB) is achieved. Preliminary measurements of evanescent-field absorption are also discussed.     

A Novel Fiber-Optic Tapered Long-Period Grating Sensor for Pressure Monitoring

The method and the required installations for fabricating tapered long-period fiber gratings can be simpler than that of standard fiber Bragg gratings, and the fabrication process is faster. To our knowledge, the tapered long-period fiber grating pressure sensor is presented here for the first time. In this paper, the fabrication method for tapered long-period fiber gratings, the sensing principle, the sensor structure, the measurement setup, and the preliminary results are presented and discussed. The pressure sensitivity of the sensor is as high as 5.1 pm/bar.     

Multiplexing Scheme for Self-Interfering Long-Period Fiber Gratings Using a Low-Coherence Reflectometry

A novel multiplexing scheme based on a low-coherence reflectometry (LCR) is proposed for a sensing array (in parallel) of self-interfering long-period fiber gratings (SI-LPGs). Each SI-LPG sensor consists of an LPG and a section of fiber with a highly reflective end (mirror). The spectral information of each LPG is sensitive to some parameters of the surrounding measurand and can be reconstructed from the corresponding subreflectograms (obtained by the LCR) through a fast Fourier transformation. The sensing signals of multiple SI-LPG sensors can be multiplexed if the length of the fiber section in each sensor is set to a different value. Experiments of measuring the surrounding temperature at different sensors are demonstrated to show the good performance of our multiplexing system.