Microwave-assisted synthesis of ceria nanoparticles

Nanocrystalline ceria (CeO₂) particles have been successfully prepared by microwave-assisted heating technique from an aqueous solution containing ammonium Ce(IV) nitrate and sodium hydroxide. Further thermal treatment of the as-prepared powder at 500 °C resulted in the formation of the well-crystallized CeO₂ nanoparticles with an average crystal size of about 8 nm, varying with the heating temperature. The as-prepared powder and the CeO₂ nanoparticles were examined using X-ray diffraction (XRD) and transmission electron microscope (TEM) techniques. It was found that the morphologies of the synthesized powder show from rod-like for the as-prepared sample to sphere-like for the heat-treated nanoparticles. Mechanism of CeO₂ nanocrystallite growth during annealing is primarily investigated.     

Preparation and characterization of CeO2 highly dispersed on activated carbon

A new material constituted by cerium dioxide highly dispersed on activated carbon (CeO₂/AC) was prepared by an impregnation method using cerium(III) nitrate as CeO₂ precursor. In order to evaluate the degree of ceria dispersion on the carbon support, CeO₂/AC was characterized by a number of techniques: thermogravimetry coupled with a mass spectrometer (TG-MS), N₂ adsorption at 77 K, temperature-programmed desorption (TPD), temperature-programmed reduction (TPR) and transmission electron microscopy (TEM). The analysis of the decomposition process under inert atmosphere indicated that cerium nitrate decomposes at 440-460 K, with the evolution of NO. Furthermore, this process produces an additional oxidation of the carbon surface (with evolution of N₂O) and the subsequent onset of new oxygen surface groups, detected by means of temperature-programmed desorption. The ceria deposition process takes place with a decrease in the N₂ adsorption capacity of the starting carbon support, and the analysis of the pore size distribution showed that the majority of ceria particles are situated at the most internal part of the carbon porosity. The temperature-programmed reduction profile of CeO₂/AC was very different to that shown by unsupported CeO₂, with only one continuous reduction process at low temperatures (800-900 K). Finally, TEM pictures gave direct evidence that ceria is highly dispersed on the carbon surface, with a narrow CeO₂ particle distribution centred around 3 nm.     

Synthesis of nanocrystalline chromium nitride from ammonolysis of chromium chloride

Nanocrystalline CrN was synthesized from ammonolysis of CrCl₃. The structure and morphology of the products were investigated by XRD, TEM and SAED. The influence of temperature and time on size of particles was also studied by XRD, TEM, SAED. Elemental analysis was carried out to establish the Cr:N atomic ratio of 1.04:1. XPS results further revealed that pure phase were obtained with the Cr:N atomic ratio of 1.05:1.     

Shape controlled synthesis of Cu2O and its catalytic application to synthesize amorphous carbon nanofibers

Octahedral Cu₂O particles and Cu₂O nanowires were synthesized by a simple solution-phase route using N₂H₄·H₂O as reducing agent at room temperature. Amorphous carbon nanofibers were synthesized using octahedral Cu₂O particles and an acetylene gas source at atmospheric pressure. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and thermogravimetric (TG) analysis. SEM and TEM images indicated that most of the obtained octahedral Cu₂O particles had an edge length of 400-700 nm. The obtained nanowires had uniform diameters of about 15 nm, and the length of the nanowires ranged from 5 to 10 μm. The XRD result revealed the amorphous feature of the nanofibers. IR spectrum revealed that the nanofibers consist of -CH, -CH_2, -CC- and -CH₃ groups. The concentrations of N₂H₄·H₂O and NaOH played important roles in controlling the geometric shape of the Cu₂O.     

Preparation and characterization of porous ultrafine Fe2O3 particles

Porous ultrafine Fe₂O₃ particles were prepared by homogeneous precipitation method. Fe³⁺ and urea were chosen as starting materials and anionic surfactant as the template. It is shown that the reaction results in the precipitation of a gelatinous hydrous iron oxide/surfactant mixture, which gives ultrafine Fe₂O₃ particles after drying and calcinations. The products were characterized by XRD, TEM, TG/DTA and BET. Conventional XRD patterns show that the products are mixture of γ-Fe₂O₃ and α-Fe₂O₃ phase after being sintered at 350 °C, and γ-Fe₂O₃ transforms entirely to α-Fe₂O₃ when sintered at 650 °C. The low-angle XRD patterns indicate that the mesostructure can only exist between 350 and 400 °C. TEM results show that the Fe₂O₃ particles have diameters of about 30 nm and lengths ranging from 100 to 120 nm; in each particle, there are several vermiculate-like mesopores with diameter of about 20-25 nm. The BET surface areas in excess of 50 m²/g are obtained after calcinations at 350 °C. The BJH desorption average pore width is around 22 nm, which is in agreement with the TEM results. The results show that anionic surfactant and sintering temperature are important to obtain this special morphology.     

Synthesis of nanocrystalline yttria doped ceria powder by urea-formaldehyde polymer gel auto-combustion process

Nanocrystalline yttria doped ceria powder has been prepared by auto-combustion of a transparent gel formed by heating an aqueous acidic solution containing methylol urea, urea, cerium(III) nitrate and yttrium(III) nitrate. The TGA and DSC studies showed the combustion reaction of the gel initiated at 225 °C and completed within a short period of time. XRD spectrum of the combustion product reveals the formation of phase pure cubic yttria doped ceria during the combustion process. Loose agglomerate of yttria doped ceria particle obtained by the combustion reaction could be easily deagglomerated by planetary ball milling and the powder obtained contains particles in the size range of 0.05-3.3 μm with D₅₀ value of 0.13 μm. The powder particles are aggregate of nanocrystallites with a wide size range of 14-105 nm. Pellets prepared by pressing the yttria doped ceria powder sintered to 95.2% TD at 1400 °C.     

Preparation and characterization of nanometer-scale powders ceria by electrochemical deposition method

Ceria (CeO₂) nanoparticles of 10-30 nm in average particle size have been synthesized via electrochemical deposition method in cerium(III) chloride solution with an undivided cell as electrochemical cell and ethanol-acetylacetone as additives. X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transformation infrared spectroscopy (FT-IR) and thermal analysis (TG-DTA) are introduced to characterize the samples. The results indicate that the as-prepared powders after being treated at 650 °C are nanocrystalline with the cubic fluorite structure and the sphericity in shape. It is revealed that the size of ceria nanoparticles can be decreased effectively by adding the ethanol-acetylacetone solution. In addition, the possible formed mechanism of CeO₂ nanometer-scale powder. The role of additive is also investigated in this paper.     

Synthesis of nanocrystalline Mo2C via sodium co-reduction of MoCl5 and CBr4 in benzene

Molybdenum carbide (Mo₂C) has been synthesized via a sodium co-reduction of molybdenum pentachloride (MoCl₅) and carbon tetrabromide (CBr₄) in benzene at 350 °C for 12 h. X-ray diffraction (XRD) pattern indicated that the product was mainly hexagonal Mo₂C with a small amount of cubic Mo₂C. The lattice constants of the hexagonal Mo₂C were a=3.009 and c=4.736 Å. Transmission electron microscopy (TEM) study showed that the product consisted of slightly conglomerated particles of about 30 nm in size.     

CeF3 nanoparticles: synthesis and characterization

CeF₃ nanoparticles 5-10 nm in size were prepared using the polyol method. CeCl₃ and HF were heated up in ethylene glycol. At a temperature of 180 °C crystalline CeF₃ nanoparticles were formed. The material was washed with ethanol, centrifugated and dried. The particles were characterized by EDX, XRD and TEM.     

A facile synthesis of novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU nanocomposite

Novel nanorod-assembling hollow nanowires of cadmium sulfide/DBTU (N,N′-dibutylthiourea) nanocomposite were synthesized by reacting CdCl₂ with in situ produced H₂S from reaction of butylamine and carbon disulfide at molar ratio 3:3 of CS₂:BuNH₂ at 50 °C. This product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SEAD), energy dispersive X-ray spectroscopy (EDAX), thermogravimetric (TG), Fourier transform infrared (FTIR) and UV-vis absorption spectra. A plausible mechanism that the extending DBTU molecules in solvent of CS₂ induce the formation of CdS/DBTU nanorods by coordinating with the formed CdS particles, and construct these nanorods to hollow nanowires via molecular interactions is proposed and discussed on the basis of experimental results. Photoluminescence (PL) of CdS/DBTU nanocomposite exhibits increasing emission intensity largely.     

Fabrication of nanocomposite particles with superparamagnetic and luminescent functionalities

A new kind of superparamagnetic luminescent nanocomposite particles has been synthesized using a modified Stöber method combined with an electrostatic assembly process. Fe₃O₄ superparamagnetic nanoparticles were coated with uniform silica shell, and then 3-aminopropyltrimethoxysilane was used to terminate the silica surface with amino groups. Finally, negatively charged CdSe quantum dots (QDs) were assembled onto the surface of the amino-terminated SiO₂/Fe₃O₄ nanoparticles through electrostatic interactions. X-ray diffraction (XRD), transmission electron microscopy (TEM), microelectrophoresis, UV-vis absorption and emission spectroscopy and magnetometry were applied to characterize the nanocomposite particles. Dense CdSe QDs were immobilized on the silica surface. The thickness of silica shell was about 35 nm and the particle size of the final products was about 100 nm. The particles exhibited favorable superparamagnetic and photoluminescent properties.     

Growth of single and double walled carbon nanotubes over Co/V/MgO catalysts

High quality single walled carbon nanotubes (SWCNTs) and double walled carbon nanotubes (DWCNTs) were synthesized on Co/V/MgO catalysts by catalytic decomposition of CH₄ in H₂. Raman spectroscopy data revealed that the diameters of as-prepared SWCNTs are 1.28 and 0.73 nm. The diameter value of DWCNTs from Raman analysis also showed a narrow diameter distribution. Using field emission transmission electron microscopy (TEM), it was found that the diameter of carbon nanotubes can be controlled mainly by adjusting the molar ratio of Co–V versus the MgO support. The structure properties of catalysts were examined by X-ray diffraction (XRD). The formation of C₇V₈ may play an important role in preserving carbon in the catalyst particle and favoring the dissociation balance of CH₄.     

Synthesis and characterization of nickel ferrite magnetic nanoparticles

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared by a polyvinyl alcohol (PVA) assisted sol-gel auto-combustion method. The structure, composition, morphology and magnetic properties of the gel precursor are characterized by powder XRD, FT-IR, TGA, HR-SEM, TEM, HR-TEM and VSM. XRD confirms the formation of single-phase nickel ferrite with space group of Fd3m and inverse spinel structure. The vibration properties of nanoparticles are analysed by FT-IR spectrum. The thermal decomposition of the gel precursors is investigated by TGA. HR-SEM and TEM images show that the particles have spherical shape with particle size in the range of ∼30 nm and consistent with XRD result. The magnetic properties of these nanoparticles are studied for confirming the ferromagnetic behaviour at room temperature.     

Synthesis of Ag modified vanadium oxide nanotubes and their antibacterial properties

Vanadium oxide nanotubes (VO_x-NTs) modified by highly dispersed Ag nanoparticles have been synthesized via a facile silver-mirror reaction. The crucial factors that affected the preparation of the Ag modified vanadium oxide nanotubes (Ag/VO_x-NTs) have been also studied. The dispersion and structure of Ag nanoparticles in the obtained materials were characterized by transmission electron microscopy (TEM), electron diffraction (ED) and X-ray diffraction (XRD). The results showed the distribution and size of the formed Ag particles were greatly influenced by the concentration of AgNO₃ solution. Typically, Ag nanoparticles were well dispersed on the VO_x-NTs with the size range from 3 to 10 nm. The corresponding antibacterial tests demonstrated the as-synthesized Ag/VO_x-NTs exhibited strong antibacterial activity against Escherichia coli (E. coli).     

The interaction of oxygen with high loaded Ru/γ-Al2O3 catalyst

The interaction of oxygen with the Ru/γ-Al₂O₃ catalyst comprising metal particle with sizes of 1-16 nm, was examined over a temperature range 20-400 °C. The catalyst loaded with 10.8 wt.% Ru was prepared by incipient wetness from RuCl₃ precursor. The structure of the Cl-containing catalyst and the catalyst after elimination Cl⁻ ions was characterized using H₂ and O₂ chemisorption, O₂ uptake, BET, XRD and TEM. The Cl⁻ ions in the catalyst decreased the H₂ and O₂ chemisorption capacity of Ru and caused large discrepancies between the mean particle size calculated from gas chemisorption and from TEM. Exposure to O₂ at 100-200 °C caused oxidation of small Ru particles, while larger particles were covered with very thin Ru_xO_y skin (undetected by XRD and TEM). The O/Ru ratio increased up to 200 °C implying high affinity of the small Ru particles to oxygen. Oxidation at 250 °C led to the formation of poorly crystalline RuO₂ particles with a mean size of 4 nm, and coverage of large Ru particles with 1.6 nm thick oxide layer. At 300 and 400 °C crystallization of the RuO₂ phase, as well as significant agglomeration of oxide particles was observed. However, even at 400 °C, metallic Ru was detected by XRD, TEM and SAED suggesting that large metal particles were not fully oxidized under the used conditions. Also, the O₂ uptake at 400 °C was lower than expected for oxidation of Ru metal to RuO₂. For the catalyst after elimination Cl ions the O₂ uptake (O/Ru ratio = 1.50) was higher, than for sample with large amount of Cl ions (O/Ru ratio = 1.34), indicating that the presence of Cl inhibits ruthenium oxidation in the Ru/Al₂O₃ catalyst.     

Preparation and characterization of the TiO2 ultrafine particles by detonation method

Utilizing the raw materials of TiOSO₄, NaOH, NH₄NO₃ and RDX, the TiO₂ ultrafine particles were prepared under high pressure and high temperature by detonation method. The structure, composition and size distribution of the TiO₂ ultrafine particles were systematically characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results indicated the as-prepared TiO₂ ultrafine particles exhibited spherical-like grains and that the average size of particles was 25 ± 5 nm. After being heated at 700 °C for 1 h, TiO₂ particles have entirely completed the anatase-rutile phase transition, which means that detonation method can effectively enhance the anatase-rutile phase transition by lowering the transition temperature. The size of TiO₂ nanoparticles can be effectively controlled because the as-prepared nanoparticles do not have enough time to grow to large and perfect crystallites during the detonation process.     

Macroporous TiO2/carbon composites prepared via a simple soaking process

A new-type composite photocatalyst of three-dimensional ordered macroporous (3DOM) TiO₂/C was prepared and tested in this paper. 3DOM carbon materials were first prepared by colloidal crystal templating process, and then the sols of TiO₂ from tetrabutyl titanate were infiltrated in the macroporous structures via capillary force. After calcinations at nitrogen flow, TiO₂/C composite materials were prepared. The obtained samples were analyzed by SEM, TEM, XRD and BET. The results indicated that macroporous TiO₂/C can remain the three-dimensional ordered structure and TiO₂ nanoparticles distributed in the interior of macropores uniformly. Eventually, 3DOM TiO₂/C materials were used as a new-type photocatalysts to decompose the methyl orange solution under ultraviolet light, which displayed excellent catalytic activity and regenerative ability.     

A mild solvothermal route to α-Fe2O3 nanoparticles

A mild solvothermal route has been developed to synthesize α-Fe₂O₃ nanoparticles using Fe(NO₃)₃ as a starting material. The results from XRD and TEM indicate the α-Fe₂O₃ powders possess a rhombohedrally centered hexagonal structure, and the size of particles from alcohothermal method at 160 °C is about 50-100 nm.     

The reaction of ceria coatings on mica with H2S: An in-situ X-ray diffraction study

Thin layers of ceria were deposited on the surface of mica platelets in solution. The reaction of such particles with hydrogen sulfide yields a red colored special effect pigment. The ceria layer reacts with H₂S to produce a variety of sulfide and oxysulfide phases. The reaction path discovered in situ by time and temperature resolved X-ray diffraction is CeO₂→CeS₂→C-Ce₂S₃→Ce₁₀S₁₄O. The reaction itself is extremely variable depending on gas flow, heating rates and decomposition atmospheres. Effects on the thin film are recorded by scanning electron microscopy (SEM) and revealed a destruction of the layer once red Ce₁₀S₁₄O was formed. The product layer then reveals the typical nonwetting behaviour of a liquid on a surface.     

Photocatalytic decomposition of methylene blue on nanocrystalline titania prepared by different methods

Nanocrystalline particles of pure anatase titania were prepared by two different methods. One is the sol-gel method at ambient temperature using ultrasonication (TiO₂-SG-US) and conventional stirring method (TiO₂-SG-S) and the other by surfactant assisted hydrothermal synthesis (TiO₂-HT). More uniform distribution/dispersion of the nanoparticles (SEM), marginally higher surface area, better thermal stability and phase purity are some of the advantages of preparation of nanocrystalline titania by sol gel ultrasonication method and hydrothermal synthesis method. The behavior of anatase titania in photocatalytic decomposition of methylene blue in aqueous medium was studied as a function of the method of preparation and the crystallite size. The nanoparticles prepared by ultrasonication method were more effective than both, the sample prepared by conventional stirring method and commercial Degussa P-25. The higher photocatalytic activity of TiO₂-SG-US is attributed to the more uniform size of the particles as compared to TiO₂-SG-S samples. Both TEM and XRD data on TiO₂-HT samples reveal a uniform and nanocrystalline TiO₂ particles, which showed photocatalytic activity in both UV and visible region although brookite phase was also present.