共查询到20条相似文献,搜索用时 250 毫秒
1.
多制式数字调制系统的设计与实现 总被引:1,自引:0,他引:1
文章简要介绍了一种利用数字调制芯片HSP50215设计和实现的高速数字调制系统,它可以对数字信号进行多种方式的调制,如BPSK、QPSK、OQPSK、MSK或mQAM。本系统可以用于有线电视信道中各种数字传输方式的研究,稍加修改也可以作为有线电视数字机顶盒或电缆modem系统的调制发送模块。 相似文献
2.
如何为数字卫星接收系统选择合适的低噪声下变频器(LNB)DonFilmer加拿大诺赛特国际有限公司卫星通讯传送系统已逐渐由数字调制的方式如BPSK和QPSK取代传统的FM或FSK模拟调制方式。在同一卫星上,用数字方式调制比模拟方式调制可传送更多的信息... 相似文献
3.
1 概述随着信息时代的来临 ,信息已成为人类社会重要的资源 ,谁拥有传递信息的网络 ,谁在信息市场领域就占据优势。作为国家 3大基础网络之一的有线电视网在传输电视节目上具有绝对优势 ,而如何开展其他信息服务来满足用户的需求 ,是当前各级广电部门都在思考的问题。2 系统选型与定位数据广播从最先的场逆程传输系统 (即VBI系统 )到后来用QPSK方式调制的系统 ,发展到现在开始推广的DVB数据广播系统 ,其优缺点见表 1。表 1DVB -CQPSKVBI传输方式 QAM调制传输QPSK调制传输场逆程传输传输速率 40Mbps 10M7… 相似文献
4.
本文提出了在蜂窝CDMA系统中使用残留边带技术的设想,如果对扩展的基带信号进行BPSK或QPSK调制,则实质上是一种线性调制,而残留边带技术适合于线性调制,可方便地提高用户的数量,用户数量的增多程度要看边带滤波器的性能。 相似文献
5.
Q2368集Chirp,BFSK,MSK,BPSK,QPSK,8-PSK等多种调制于一身,并可精确控制输出频率的相位,同时提供I/Q双通道输出或工作时钟高达130MHz的单路输出。本文详细介绍了Q2368的应用方法,并给出了一个产生Chirp信号的实用电路。 相似文献
6.
本文详细叙述了用于移动通信和个人通信系统的各种数字调制技术。其中包括北美和日本第二代数字蜂窝区移动通信系统使用的移相π/QPSK,以及欧洲GSM系统使用的高斯最小频移键控(GMSK)。本文还简要介绍了未来系统调制方式的研究动态。 相似文献
7.
IJF-OQPSK数字调制器 总被引:1,自引:0,他引:1
无符号间干扰和抖动-交错正交相移键控(IFJ-OQPSK)是现代数字调制技术中的一种新的调制方式。在介绍一种新型集成调制芯片的基础上,给出实现IJF-OQPSK调制器的具体电路。 相似文献
8.
本文针对移动卫星通信信道频带受限(文中称为带限)和非线性同时存在的特点,讨论了几种适用的数字调制解调技术。即交错正交移相键控(OQPSK)、无符号同干扰和抖动-交错正交移相键控(IJF-QOPSK),最小频移健控(MSK)和与编码结合的调制解调技术。并对这些调制解调技术的性能进行了对比分析。 相似文献
9.
正弦移频键控调制信号具有恒包络和平滑的相位变化特性,把它作为直接序列扩频信号的切普基本波形,将使扩频信号具有带外辐射低,而相应的系统受非线性影响小等特点。分析表明,采用SFSK调制的直接序列扩频系统较QPSK-DS/SSMA及MSK-DS/SSMA系统有更好的多址能力。 相似文献
10.
介绍了TCM/8PSK/IDR和QPSK/IDR的工作方式以及主要传输参数,就两者对卫星转发器频带和功率利用率进行了比较;提出了今后国内卫星通信网在现仍体制下采用TCM/8PSK/IDR取代QPSK/IDR的建议。 相似文献
11.
12.
电光强度调制一般是基于线性理论,在某些高精密系统中,其非线性误差分析对于系统的指标评定和误差校正具有一定意义。首先,详细推导了电光强度调制器在一般情况下的光强调制函数,并阐述了工作点的重要性;接着,对标准工作点及其附近的情况进行了非线性误差的计算分析,且分别给出了表达式;然后,从频域的角度讨论高次谐波对调制的影响;最后,在时域上比较不同调制深度下的实际调制和理想调制效果。公式推演和实验分析表明,工作点的高度稳定性和小信号调制可以减小非线性误差,这些误差可以定性定量地表示出来,有望通过补偿的方法提高电光强度调制系统的精度。 相似文献
13.
利用数值模拟的方法研究了电流调制下偏置电流和调制频率对垂直腔面发射半导体激光器(VCSEL)混沌动力学特性的影响.数值模拟结果表明,在一定的调制频率下,偏置电流较大时VCSEL处于稳定的周期一态.偏置电流较小时激光器在调制参数的某些区间会出现阵发混沌;在一定的偏置电流下,调制频率较小时,VCSEL处于稳定的周期一态,调制频率较大时系统在调制参数的某些区间会出现阵发混沌.所以偏置电流和调制频率是影响VCSEL混沌动力学特性的重要参数,可以通过适当控制偏置电流和调制频率找到系统的周期态和混沌态. 相似文献
14.
基于谐波检测的调制光谱技术可以实现气体浓度的高灵敏检测,而最佳分析性能的实现依赖于系统调制参数的优化。研究了基于谐波的红外激光调制光谱信号特征,分析了调制参数与谐波特性的对应关系,针对典型的红外半导体激光光谱气体检测系统开展了实验研究与验证分析,获取了不同调制信号电压的谐波信号特征,分析确定了系统最佳调制参数。 相似文献
15.
Katoh H. 《Proceedings of the IEEE. Institute of Electrical and Electronics Engineers》2006,94(1):289-295
Broadcasting satellite (BS) digital broadcasting of HDTV in Japan is laid down by the ISDB-S international standard. Since it has a unique transmission technique that can use a number of modulation schemes simultaneously in one RF carrier, the most suitable modulation scheme for the broadcast content can be selected even within one RF carrier. In addition, a hierarchical modulation technique that can mitigate rain attenuation can be introduced as an application of this transmission system. This paper shows how the transmission system establishes such a versatile function. 相似文献
16.
17.
《Vehicular Technology, IEEE Transactions on》1981,30(3):102-111
A digital modulation system with compact spectrum and constant envelope is proposed, based on the results of theoretical and experimental studies. This modulation system is suitable for digital mobile communication, which generally is subject to deep and rapid fading. It is characterized with a possibility of practical and stable instrumentation. In the modulator, modulation signal parameters are read out of the memories, by which precise spectrum and waveform can be realized. For the modulator, an orthogonal phase modulation, whose parameters are stable, can be adopted by pertinent parameter design for the modulating signal stored in the memories. The experimental results agree well with the design. 相似文献
18.
In this work, a combined amplitude-phase modulation communication system is considered. Amplitude modulation is used to transmit a voice signal, and phase modulation is used for data transmission. Such a scheme was studied as a possible realization of a data channel between aircraft and ground station, which can be introduced without great modifications of the actual on-board equipment. The performance of the combined modulation system is evaluated through a computer simulation. 相似文献
19.
20.
Low power consumption and high data rate are the most important requirements for the communication system. Especially, very
low power consumption modulation method is required for the short range communication systems such as the medical implantable
communication devices or capsule endoscope, and so on. For the higher data rate, we like to combine the OFDM system into the
QAPM since the OFDM system has higher bandwidth efficiency than a single-carrier system. In this paper, we like to propose
a QAPM (Quadrature amplitude position modulation) method combined with the orthogonal frequency-division multiplexing (OFDM)
system. Next, we analyze the performance of three low-power-consumption modulation schemes: the phase shift position modulation
(PSPM), phase silence shift keying (PSSK), and QAPM using orthogonal frequency-division multiplexing (OFDM) system in the
multi-path channel. These schemes have lower bandwidth efficiency and the higher power efficiency than the existing phase-shift
keying (PSK) and quadrature amplitude modulation (QAM) schemes. It can be shown that they can achieve greater power efficiency
because every modulation symbol has a zero-envelope period as in pulse-position modulation (PPM) techniques. Finally, we compare
the performances of the PSPM, PSSK, and QAPM modulation combined with the OFDM system with regard to bit error rate performance
and throughput. 相似文献