共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
3.
Z. P. Luo Yali Tang Z. Wu M. J. Kramer R. W. McCallum 《Materials Characterization》1999,43(5):293-301
The dislocation structures of an industrial single-crystal γ + γ′ two-phase alloy DD3 after tensile deformation from room temperature to 1273K were studied by transmission electron microscopy. The strength of this alloy decreased with an increase in the temperature, and showed a strength peak at 1033K. At room temperature, the dislocations shearing the γ′ particles were found to be 1/3<112> partial dislocations on the dodecahedral slip system <112>{111}. Some dislocation pairs on the cubic <110>{100} system that blocked the glide of dislocations were found at a medium temperature of 873K. As a result, dislocation bands were formed. Shearing of γ′ particles by 1/3<112> partial dislocations on the dodecahedral slip system <112>{111} was also found at this temperature. At the peak temperature of 1033K, because of the strong interaction between dislocations on the {111} and {100} planes, the extent of dislocation bands with high dislocation densities was extensive. The 1/3<112> partial dislocations on the dodecahedral slip system <112>{111} also existed. When the temperature reached the high temperature of 1133K, the range of dislocation bands was limited. The γ′ particles were sheared by <110> dislocation pairs on the octagonal <110>{111} system and the cubic <110>{100} system. At 1273K, the regular hexagonal dislocation networks were formed in the γ matrix and at the γ/γ′ interface. The Burgers vectors of the network were found to be b1 = 1/2[110], b2 = 1/2[1–10], b3 = [100], and the last one was formed by the reaction of b1 + b2 → b3. Dislocations shearing the γ′ particles were found to be <110> dislocation pairs on the octagonal system <110>{111} and cubic slip system <110>{100} at 1273K. 相似文献
4.
M.A. Saettel A. Sellam A. Nourreddine A. Pape 《Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment》2008,590(1-3):151
The RaMsEs Group (Radioprotection et Mesures Environnementales) of the IPHC performs research and offers services mainly in the field of radioactivity measurements and sample analysis. This report will describe some of our recent experience using a semiautomatic evaporation system to prepare large area thin deposits for total α and β counting and gives experimental and simulated results for the autoabsorption coefficients. 相似文献
5.
Bin Liu Yunping Li Hiroaki Matsumoto Yuichiro Koizumi Yong Liu Akihiko Chiba 《Advanced Engineering Materials》2012,14(9):785-789
This study reports a novel forging process to fabricate bulk fine‐grained (grain size ≈ 1 µm) Ti–6Al–4V alloy, in which temperatures near the β transus (Tβ) and strain rates around 0.15 s?1 are used for the deformation. The formation of fine‐grained microstructure is mainly result from the deformation‐induced precipitation of α grains from the β matrix. 相似文献
6.
Hiroshi Miyahara Morishige Mizuno Tamaki Watanabe 《Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment》1985,228(2-3):397-401
An attempt is made to calculate an efficiency function applicable to 4πβ-γ coincidence measurements as the first stage of evaluating the order of the polynomial of the fitting function. For this purpose, the β-ray energy spectra and self-absorptions of spherical particle sources are calculated by the Monte Carlo simulation under the continuous slowing down approximation. On the other hand, it is shown that three sets of absorption coefficients and partial intensity ratios corresponding to a β-ray group give analytically the self-absorption for the same particle sources. Finally, we show that the efficiency functions applicable to 59Fe and 134Cs are easily obtained by using the energy spectra or self-absorptions. 相似文献
7.
Knowledge of the machining parameters for titanium aluminides of the type γ-TiAl is essential for the acceptance and application of this new heat-resistant light-weight material for high performance components in automobile and aircraft engines. This work evaluates drilling, turning, sawing, milling, electroerosion, grinding, and high-pressure water-jetting of primary castings. The results indicate that there is a potential for each machining process, but a high quality of surface finish can only be achieved by some of the processes. 相似文献
8.
9.
Limei Cha Thomas Schmoelzer Zaoli Zhang Svea Mayer Helmut Clemens Peter Staron Gerhard Dehm 《Advanced Engineering Materials》2012,14(5):299-303
In situ heating transmission electron microscopy (TEM) was used to investigate the initial stage of γ‐TiAl lamellae formation in an intermetallic Ti–45Al–7.5Nb alloy (in at.%). The material was heat treated and quenched in a non‐equilibrium state to consist mainly of supersaturated, ordered α2‐Ti3Al grains. Subsequently, specimens were annealed inside a TEM up to 750 °C. The in situ TEM study revealed that ultra‐fine γ‐TiAl laths precipitate in the α2‐matrix at ≈730 °C which exhibit the classical Blackburn orientation relationship, i.e. (0001)α2//(111)γ and [$11{\bar {2}}0$ ]α2//<110]γ. The microstructural development observed in the in situ TEM experiment is compared to results from conventional ex situ TEM studies. In order to investigate the precipitation behavior of the γ‐phase with a complementary method, in situ high energy X‐ray diffraction experiments were performed which confirmed the finding that γ‐laths start to precipitate at ≈730 °C from the supersaturated α2‐matrix. 相似文献
10.
M. Stalder S. Vogel M. A. M. Bourke J. G. Maldonado D. J. Thoma V. W. Yuan 《Materials Science and Engineering: A》2000,280(2)
Coupons of austenitic 304 stainless steel (γ) were transformed to approximately 90% martensite (α′) and 10% austenite by rolling at 77 K. Subsequently the reverse α′→γ transformation was instigated by heating the coupons to 680°C. The retransformation was monitored, in situ, by dilatometry and neutron Bragg edge diffraction (BED). Results from the two techniques show good agreement and suggest that the transformation kinetics are best described by two Avrami exponents, n=2.5 and n=0.2 respectively. A limited discussion of the lattice parameter evolution during the transformation is included. Possible mechanisms for growth dynamics and stress relaxation are discussed. 相似文献
11.
12.
A comparison is made between the measured α/β phase fractions in Ti-6246 using X-ray diffraction (XRD) and electron microscopy. Image analysis of SEM and TEM images was compared to the phase fraction estimate obtained using electron backscattered diffraction, lab and high-energy synchrotron XRD. There was a good agreement between the electron microscopic and diffraction techniques, provided that the microstructural parameters of grain size and texture are estimated correctly when using quantitative Rietveld refinement. 相似文献
13.
14.
Good machinability and formability of technical brasses α + β have to be preserved when alternative modifications are developed instead of alloying with toxic lead. Several model brasses of this type, which exhibit satisfactory machinability, are creep tested at 780 °C to compare their high temperature formability. The observed stationary creep rate and local ductility may highly differ for various alloy types. To characterize the impact of individual additions, superposition laws for the respective quantities are proposed and applied to the measured values. The strong effect of even small amounts of some additions on the creep rate and the boundary component of ductility is suggested to be due to segregation phenomenon. Rigid particles, such as phosphides, enhance significantly the creep resistance of the material, though restrict the macroscopic stability of plastic flow. On the other hand, the contribution of liquid particles to the creep damage may be effectively obstructed by phosphides. 相似文献
15.
The effects of thermally induced cyclic γ ? ε transformation on microstructures and shape memory effect (SME) are investigated in a quenched Fe14Mn5.5Si8.0Cr5.0Ni alloy. The results show that the annealing at 773 K remarkably improves the SME in the quenched alloy. One thermal cycling between 290 and 773 K remarkably increases the SME, but the further thermal cycling hardly improves the SME. The reason is that the amount of thermal ε martensite remarkably reduces after annealing at 773 K, but it hardly changes with the further increase of thermal cycling between 290 and 773 K. The pre‐existing thermal ε martensite not only prevents the occurrence of stress‐induced ε martensitic transformation but also promotes the formation of α′ martensite. 相似文献
16.
D. Peri C. M. Wyandt R. W. Cleary A. H. Hikal A. B. Jones 《Drug development and industrial pharmacy》1994,20(8):1401-1410
Tolnaftate, an antifungal agent, was found to form inclusion complexes with both β-cyclodextrin (β-CD) and hydroxypropyl β-cyclodextrins (HPBCDs) with two different degrees of substitution [HPBCD(A)-8% and HPBCD(B)-3%]. Complex formation in the solution state was studied using phase solubility and spectral shift methods. Solid complexes were prepared by the coprecipitation method. Solubilities and dissolution rates were determined for each solid complex, its corresponding physical mixture, and free drug. The increase in solubility of tolnaftate with added HPBCD was found to be significantly greater than with added β-CD. For both HPBCD(A) and HPBCD(B), over the concentration range 0-0.05 M. 1:1 complexes with stability constants of 1460 ± 139 M-1 and 1860 ± 165 M-1 were observed, respectively. Over the β-CD concentration range 0-0.02 M, a 1:1 complex with a stability constant of 1190 ± 105 M-1 was observed. At higher HPBCD concentrations, the increase in solubility was observed to show a positive deviation from linearity (type Ap phase diagram). Using the spectral method, in a 2 5% v/v methanol in water system, the stability constants were determined to be 1020 ± 150 M-1 1110 ± 120 M-1 and 1100 ± 260 M-1 for HPBCD(A), HPBCD(B) and β-CD, respectively. The solid complexes prepared showed improved dissolution over physical mixtures and free drug. 相似文献
17.
M. Fröhlich A. Ebach‐Stahl R. Braun C. Leyens 《Materialwissenschaft und Werkstofftechnik》2007,38(9):667-673
Engine designers show continued interest in γ‐TiAl based titanium aluminides as light–weight structural materials to be used at moderately elevated temperatures. Although alloy development has made significant progress in terms of mechanical properties and environmental resistance, protective coatings have been developed that help to extend the lifetime of these alloys significantly. The major challenge of coating development is to prevent the formation of fast growing titania. Furthermore, changes of coating chemistries at high temperatures have to be considered in order to avoid rapid degradation of the coatings due to interdiffusion between substrate and coating. The paper describes recent work of the authors on different coatings produced by means of magnetron sputter technique. Thin ceramic Ti‐Al‐Cr‐Y‐N layers tested at 900 °C exhibited poor oxidation resistance. In contrast, intermetallic Ti‐Al‐Cr, Si‐based and aluminum rich Ti‐Al coatings were tested at exposure temperatures up to 950 °C for 1000h resulting in reasonable and partially excellent oxidation behaviour. 相似文献
18.
19.
A. Strondl R. Fischer G. Frommeyer A. Schneider 《Materials Science and Engineering: A》2008,480(1-2):138-147
Samples with a composition similar to the nickel-based superalloy Inconel alloy 718 were produced by electron beam melting of prealloyed powder and investigated with respect to type and composition of the strengthening precipitates. The matrix consists of γ grains orientated in nearly the same direction, almost like a single crystal. Coarse precipitates (<2 μm), mostly of the (Ti,Nb)(C,N,B) type with B1 structure, are aligned along the growth direction. TEM and APFIM investigations of the γ matrix revealed very fine γ″ precipitates of around 5–10 nm in size. Additionally, at small angle grain boundaries, coarser γ″ precipitates of 50–100 nm in size have been observed. The 0 01 γ//0 0 1 γ″ and {1 0 0} γ//{1 0 0} γ″ orientation relationship between γ and γ″, known from literature [M. Sundararaman, P. Mukhopadhyay, Mater. Charact. 31 (1993) 191–196], was confirmed. Some γ′ precipitates of 2–5 nm in size were observed by means of FIM. 相似文献