Novel Biocompatible Polysaccharide‐Based Self‐Healing Hydrogel

A novel biocompatible polysaccharide‐based self‐healing hydrogel, CEC‐l‐OSA‐l‐ADH hydrogel (“l” means “linked‐by”), is developed by exploiting the dynamic reaction of N‐carboxyethyl chitosan (CEC) and adipic acid dihydrazide (ADH) with oxidized sodium alginate (OSA). The self‐healing ability, as demonstrated by rheological recovery, macroscopic observation, and beam‐shaped strain compression measurement, is attributed to the coexistence of dynamic imine and acylhydrazone bonds in the hydrogel networks. The CEC‐l‐OSA‐l‐ADH hydrogel shows excellent self‐healing ability under physiological conditions with a high healing efficiency (up to 95%) without need for any external stimuli. In addition, the CEC‐l‐OSA‐l‐ADH hydrogel exhibits good cytocompatibility and cell release as demonstrated by three‐dimensional cell encapsulation. With these superior properties, the developed hydrogel holds great potential for applications in various biomedical fields, e.g., as cell or drug delivery carriers.     

Injectable Self‐Healing Antibacterial Bioactive Polypeptide‐Based Hybrid Nanosystems for Efficiently Treating Multidrug Resistant Infection,Skin‐Tumor Therapy,and Enhancing Wound Healing

The surgical procedure in skin‐tumor therapy usually results in cutaneous defects, and multidrug‐resistant bacterial infection could cause chronic wounds. Here, for the first time, an injectable self‐healing antibacterial bioactive polypeptide‐based hybrid nanosystem is developed for treating multidrug resistant infection, skin‐tumor therapy, and wound healing. The multifunctional hydrogel is successfully prepared through incorporating monodispersed polydopamine functionalized bioactive glass nanoparticles (BGN@PDA) into an antibacterial F127‐ε‐Poly‐L‐lysine hydrogel. The nanocomposites hydrogel displays excellent self‐healing and injectable ability, as well as robust antibacterial activity, especially against multidrug‐resistant bacteria in vitro and in vivo. The nanocomposites hydrogel also demonstrates outstanding photothermal performance with (near‐infrared laser irradiation) NIR irradiation, which could effectively kill the tumor cell (>90%) and inhibit tumor growth (inhibition rate up to 94%) in a subcutaneous skin‐tumor model. In addition, the nanocomposites hydrogel effectively accelerates wound healing in vivo. These results suggest that the BGN‐based nanocomposite hydrogel is a promising candidate for skin‐tumor therapy, wound healing, and anti‐infection. This work may offer a facile strategy to prepare multifunctional bioactive hydrogels for simultaneous tumor therapy, tissue regeneration, and anti‐infection.     

Self‐Healing,Flexible, and Tailorable Triboelectric Nanogenerators for Self‐Powered Sensors based on Thermal Effect of Infrared Radiation

Self‐healing triboelectric nanogenerators (TENGs) with flexibility, robustness, and conformability are highly desirable for promising flexible and wearable devices, which can serve as a durable, stable, and renewable power supply, as well as a self‐powered sensor. Herein, an entirely self‐healing, flexible, and tailorable TENG is designed as a wearable sensor to monitor human motion, with infrared radiation from skin to promote self‐healing after being broken based on thermal effect of infrared radiation. Human skin is a natural infrared radiation emitter, providing favorable conditions for the device to function efficiently. The reversible imine bonds and quadruple hydrogen bonding (UPy) moieties are introduced into polymer networks to construct self‐healable electrification layer. UPy‐functionalized multiwalled carbon nanotubes are further incorporated into healable polymer to obtain conductive nanocomposite. Driven by the dynamic bonds, the designed and synthesized materials show excellent intrinsic self‐healing and shape‐tailorable features. Moreover, there is a robust interface bonding in the TENG devices due to the similar healable networks between electrification layer and electrode. The output electric performances of the self‐healable TENG devices can almost restore their original state when the damage of the devices occurs. This work presents a novel strategy for flexible devices, contributing to future sustainable energy and wearable electronics.     

Composite Colloidal Gels Made of Bisphosphonate‐Functionalized Gelatin and Bioactive Glass Particles for Regeneration of Osteoporotic Bone Defects

Injectable composite colloidal gels are developed for regeneration of osteoporotic bone defects through a bottom‐up assembly from bisphosphonate‐functionalized gelatin and bioactive glass particles. Upon bisphosphonate functionalization, gelatin nanoparticles show superior adhesion toward bioactive glass particles, resulting in elastic composite gels. By tuning their composition, these composite colloidal gels combine mechanical robustness with self‐healing ability. The composite colloidal gels support cell proliferation and differentiation in vitro without requiring any osteogenic supplement. In vivo evaluation of the composite colloidal gels reveals their capacity to support the regeneration of osteoporotic bone defects. Furthermore, the bisphosphonate modification of gelatin induces a therapeutic effect on the peri‐implantation region by enhancing the bone density of the osteoporotic bone tissue. Consequently, these composite colloidal gels offer new therapeutic opportunities for treatment of osteoporotic bone defects.     

Protein‐Based Hydrogels that Actuate Self‐Folding Systems

An approach to build a chemomechatronic system inspired by self‐folding robots is described. This system, which comprises a protein‐based hydrogel bound to a low‐profile laminate, responds to different aqueous environments by undergoing geometric transformations. This response is dependent on the thickness and stiffness of the templating hydrogel, which directly regulates the diffusion of water into and out of the platform to initiate its reversible shape changes. When modified to include more complex geometries, these controllable shape changes can also be used to selectively trigger multiple folding events, illustrating a new platform for chemically initiated mechatronic devices. Together, these data show how compositionally discrete components are physically, chemically, and mechanically coupled together to generate a new actuator for biohybrid self‐folding systems.     

Deciphering,Designing, and Realizing Self‐Folding Biomimetic Microstructures Using a Mass‐Spring Model and Inkjet‐Printed,Self‐Folding Hydrogels

Flat, organic microstructures that can self‐fold into 3D microstructures are promising for tissue regeneration, for being capable of distributing living cells in 3D while forming highly complex, biomimetic architectures to assist cells in performing regeneration. However, the design of self‐folding microstructures is difficult due to a lack of understanding of the underlying formation mechanisms. This study helps bridge this gap by deciphering the dynamics of the self‐folding using a mass‐spring model. This numerical study reveals that self‐folding procedure is multi‐modal, which can become random and unpredictable by involving the interplays between internal stresses, external stimulation, imperfection, and self‐hindrance of the folding body. To verify the numerical results, bilayered, hydrogel‐based micropatterns capable of self‐folding are fabricated using inkjet‐printing and tested. The experimental and numerical results are consistent with each other. The above knowledge is applied to designing and fabricating self‐folding microstructures for tissue‐engineering, which successfully creates 3D, cell‐scaled, and biomimetic microstructures, such as microtubes, branched microtubes, and hollow spheres. Embedded in self‐folded microtubes, human mesenchymal stem cells proliferate and form linear cell‐organization mimicking the cell morphology in muscles and tendons. The above knowledge and study platforms can greatly contribute to the research on self‐folding microstructures and applications to tissue regeneration.     

Acylhydrazones as Reversible Covalent Crosslinkers for Self‐Healing Polymers

The utilization of dynamic covalent and noncovalent bonds in polymeric materials offers the possibility to regenerate mechanical damage, inflicted on the material, and is therefore of great interest in the field of self‐healing materials. For the design of a new class of self‐healing materials, methacrylate containing copolymers with acylhydrazones as reversible covalent crosslinkers are utilized. The self‐healing polymer networks are obtained by a bulk polymerization of an acylhydrazone crosslinker and commercially available methacrylates as comonomers to fine‐tune the T_g of the systems. The influence of the amount of acylhydrazone crosslinker and the self‐healing behavior of the polymers is studied in detail. Furthermore, the basic healing mechanism and the corresponding mechanical properties are analyzed.     

Highly Efficient Self‐Healable and Dual Responsive Cellulose‐Based Hydrogels for Controlled Release and 3D Cell Culture

To face the increasing demand of self‐healing hydrogels with biocompatibility and high performances, a new class of cellulose‐based self‐healing hydrogels are constructed through dynamic covalent acylhydrazone linkages. The carboxyethyl cellulose‐graft‐dithiodipropionate dihydrazide and dibenzaldehyde‐terminated poly(ethylene glycol) are synthesized, and then the hydrogels are formed from their mixed solutions under 4‐amino‐DL‐phenylalanine (4a‐Phe) catalysis. The chemical structure, as well as microscopic morphologies, gelation times, mechanical and self‐healing performances of the hydrogels are investigated with ¹H NMR, Fourier transform infrared spectroscopy, atomic force microscopy, rheological and compression measurements. Their gelation times can be controlled by varying the total polymer concentration or 4a‐Phe content. The resulted hydrogels exhibit excellent self‐healing ability with a high healing efficiency (≈96%) and good mechanical properties. Moreover, the hydrogels display pH/redox dual responsive sol‐gel transition behaviors, and are applied successfully to the controlled release of doxorubicin. Importantly, benefitting from the excellent biocompatibility and the reversibly cross‐linked networks, the hydrogels can function as suitable 3D culture scaffolds for L929 cells, leading to the encapsulated cells maintaining a high viability and proliferative capacity. Therefore, the cellulose‐based self‐healing hydrogels show potential applications in drug delivery and 3D cell culture for tissue engineering.     

Physical Double‐Network Hydrogel Adhesives with Rapid Shape Adaptability,Fast Self‐Healing,Antioxidant and NIR/pH Stimulus‐Responsiveness for Multidrug‐Resistant Bacterial Infection and Removable Wound Dressing

Developing physical double‐network (DN) removable hydrogel adhesives with both high healing efficiency and photothermal antibacterial activities to cope with multidrug‐resistant bacterial infection, wound closure, and wound healing remains an ongoing challenge. An injectable physical DN self‐healing hydrogel adhesive under physiological conditions is designed to treat multidrug‐resistant bacteria infection and full‐thickness skin incision/defect repair. The hydrogel adhesive consists of catechol–Fe³⁺ coordination cross‐linked poly(glycerol sebacate)‐co‐poly(ethylene glycol)‐g‐catechol and quadruple hydrogen bonding cross‐linked ureido‐pyrimidinone modified gelatin. It possesses excellent anti‐oxidation, NIR/pH responsiveness, and shape adaptation. Additionally, the hydrogel presents rapid self‐healing, good tissue adhesion, degradability, photothermal antibacterial activity, and NIR irradiation and/or acidic solution washing‐assisted removability. In vivo experiments prove that the hydrogels have good hemostasis of skin trauma and high killing ratio for methicillin‐resistant staphylococcus aureus (MRSA) and achieve better wound closure and healing of skin incision than medical glue and surgical suture. In particular, they can significantly promote full‐thickness skin defect wound healing by regulating inflammation, accelerating collagen deposition, promoting granulation tissue formation, and vascularization. These on‐demand dissolvable and antioxidant physical double‐network hydrogel adhesives are excellent multifunctional dressings for treating in vivo MRSA infection, wound closure, and wound healing.     

Protein Fragment Reconstitution as a Driving Force for Self‐Assembling Reversible Protein Hydrogels

Due to their potential biomedical applications, protein‐based hydrogels have attracted considerable interest. Although various methods have been developed to engineer self‐assembling, physically‐crosslinked protein hydrogels, exploring novel driving forces to engineer such hydrogels remains challenging. Protein fragment reconstitution, also known as fragment complementation, is a self‐assembling mechanism by which protein fragments can reconstitute the folded conformation of the native protein when split into two halves. Although it has been used in biophysical studies and bioassays, fragment reconstitution has not been explored for hydrogel construction. Using a small protein GL5 as a model, which is capable of fragment reconstitution to reconstitute the folded GL5 spontaneously when split into two halves, GN and GC, we demonstrate that protein fragment reconstitution is a novel driving force for engineering self‐assembling reversible protein hydrogels. Fragment reconstitution between GN and GC crosslinks GN and GC‐containing proteins into self‐assembling reversible protein hydrogels. These novel hydrogels show temperature‐dependent reversible sol‐gel transition, and excellent property against erosion in water. Since many proteins can undergo fragment reconstitution, we anticipate that such fragment reconstitution may offer a general driving force for engineering protein hydrogels from a variety of proteins, and thus significantly expanding the ‘toolbox’ currently available in the field of biomaterials.     

Highly Efficient and Water‐Insensitive Self‐Healing Elastomer for Wet and Underwater Electronics

Integrating self‐healing capabilities into soft electronic devices increases their durability and long‐term reliability. Although some advances have been made, the use of self‐healing electronics in wet and/or (under)water environments has proven to be quite challenging, and has not yet been fully realized. Herein, a new highly water insensitive self‐healing elastomer with high stretchability and mechanical strength that can reach 1100% and ≈6.5 MPa, respectively, is reported. The elastomer exhibits a high (>80%) self‐healing efficiency (after ≈ 24 h) in high humidity and/or different (under)water conditions without the assistance of an external physical and/or chemical triggers. Soft electronic devices made from this elastomer are shown to be highly robust and able to recover their electrical properties after damages in both ambient and aqueous conditions. Moreover, once operated in extreme wet or underwater conditions (e.g., salty sea water), the self‐healing capability leads to the elimination of significant electrical leakage that would be caused by structural damages. This highly efficient self‐healing elastomer can help extend the use of soft electronics outside of the laboratory and allow a wide variety of wet and submarine applications.     

Autonomic Self‐Repairing Glassy Materials

A new process that enables glassy materials to self‐repair from mechanical damage is presented in this paper. Contrary to intrinsic self‐healing, which involves overheating to enable crack healing by glass softening, this process is based on an extrinsic effect produced by vanadium boride (VB) particles dispersed within the glass matrix. Self‐repair is obtained through the oxidation of VB particles, and thus without the need to increase the operating temperature. The VB healing agent is selected for its capacity to oxidize at a lower temperature than the softening point of the glass. Thermogravimetric analyses indeed show that VB oxidation is rapid and occurs below the glass transition temperature. Solid‐state nuclear magnetic resonance spectroscopy indicates that VB is oxidized into V₂O₅ and B₂O₃, which enable the local formation of glass. The autonomic self‐healing effect is demonstrated by an in situ experiment visualized using an environmental scanning electron microscope. It is shown that a crack could be healed by the VB oxidation products.     

Developments and Challenges in Self‐Healing Antifouling Materials

Self‐healing antifouling materials have gained rapidly increasing interest over the past decade and have been studied and used in a rapidly increasing range of applications. Recent developments and challenges in self‐healing antifouling materials are summarized in four sections: first, the different mechanisms for both antifouling and self‐healing are briefly discussed. Second, three main categories of self‐healing antifouling materials based on surface replenishing and dynamic covalent and noncovalent interactions are discussed, with a focus on the preparation, characterization, and central characteristics of different self‐healing antifouling materials. Third, different types of potential applications of self‐healing antifouling materials are summarized, such as injectable hydrogels and oil/water separations. Finally, a summary of future development of the field is provided, and a number of critical limitations that are still outstanding are highlighted.     

A Novel Design Strategy for Fully Physically Linked Double Network Hydrogels with Tough,Fatigue Resistant,and Self‐Healing Properties

Double network (DN) hydrogels with two strong asymmetric networks being chemically linked have demonstrated their excellent mechanical properties as the toughest hydrogels, but chemically linked DN gels often exhibit negligible fatigue resistance and poor self‐healing property due to the irreversible chain breaks in covalent‐linked networks. Here, a new design strategy is proposed and demonstrated to improve both fatigue resistance and self‐healing property of DN gels by introducing a ductile, nonsoft gel with strong hydrophobic interactions as the second network. Based on this design strategy, a new type of fully physically cross‐linked Agar/hydrophobically associated polyacrylamide (HPAAm) DN gels are synthesized by a simple one‐pot method. Agar/HPAAm DN gels exhibit excellent mechanical strength and high toughness, comparable to the reported DN gels. More importantly, because the ductile and tough second network of HPAAm can bear stress and reconstruct network structure, Agar/HPAAm DN gels also demonstrate rapid self‐recovery, remarkable fatigue resistance, and notable self‐healing property without any external stimuli at room temperature. In contrast to the former DN gels in both network structures and underlying association forces, this new design strategy to prepare highly mechanical DN gels provides a new avenue to better understand the fundamental structure‐property relationship of DN hydrogels, thus broadening current hydrogel research and applications.     

3D Molecularly Functionalized Cell‐Free Biomimetic Scaffolds for Osteochondral Regeneration

Clinically, cartilage damage is frequently accompanied with subchondral bone injuries caused by disease or trauma. However, the construction of biomimetic scaffolds to support both cartilage and subchondral bone regeneration remains a great challenge. Herein, a novel strategy is adopted to realize the simultaneous repair of osteochondral defects by employing a self‐assembling peptide hydrogel (SAPH) FEFEFKFK (F, phenylalanine; E, glutamic acid; K, lysine) to coat onto 3D‐printed polycaprolactone (PCL) scaffolds. Results show that the SAPH‐coated PCL scaffolds exhibit highly improved hydrophilicity and biomimetic extracellular matrix (ECM) structures compared to PCL scaffolds. In vitro experiments demonstrate that the SAPH‐coated PCL scaffolds promote the proliferation and osteogenic differentiation of rabbit bone mesenchymal stem cells (rBMSCs) and maintain the chondrocyte phenotypes. Furthermore, 3% SAPH‐coated PCL scaffolds significantly induce simultaneous regeneration of cartilage and subchondral bone after 8‐ and 12‐week implantation in vivo, respectively. Mechanistically, by virtue of the enhanced deposition of ECM in SAPH‐coated PCL scaffolds, SAPH with increased stiffness facilitates and remodels the microenvironment around osteochondral defects, which may favor simultaneous dual tissue regeneration. These findings indicate that the 3% SAPH provides efficient and reliable modification on PCL scaffolds and SAPH‐coated PCL scaffolds appear to be a promising biomaterial for osteochondral defect repair.     

Self‐Adaptive All‐In‐One Delivery Chip for Rapid Skin Nerves Regeneration by Endogenous Mesenchymal Stem Cells

Skin wound therapy aims not only to restore skin protection but also to recover excitation functions through nerve regeneration. During the restoration of skin nerves, the recruitment of endogenous stem cells and promotion of neuronal regeneration on site work stepwise are foundations of in situ regeneration. However, current therapeutic systems usually execute each process separately, leading to limited regeneration and recovery of excitation functions. Herein, a novel self‐adaptive all‐in‐one delivery chip (G:P:Al‐Chip) is constructed that combines therapeutic protein release, gene delivery, and electrical conduction in a single microfluidic chip by 3D coaxial printing. G:P:Al‐Chip consists of an outer conductive hydrogel shell anchored with chemokine and an inner microchannel filled with enzyme‐initiated vector/plasmid DNAs microcomplexes. G:P:Al‐Chip delivers chemokine, functional plasmid DNAs, and promotes electrical conduction with a self‐adaptive program that significantly enhances the recruitment of endogenous mesenchymal stem cells and promotes neuronal regeneration. G:P:Al‐Chip is shown to enhance nerve regeneration with excitation functions within 23 days. G:P:Al‐Chip organizes recruitment and neuronal regeneration cues along with bioelectrical signal in one degradable chip for accelerated skin nerve regeneration.     

Reinforcement of Shear Thinning Protein Hydrogels by Responsive Block Copolymer Self‐Assembly

Shear thinning hydrogels are promising materials that exhibit rapid self‐healing following the cessation of shear, making them attractive for applications including injectable biomaterials. Here, self‐assembly is demonstrated as a strategy to introduce a reinforcing network within shear thinning artificially engineered protein gels, enabling a responsive transition from an injectable state at low temperatures with a low yield stress to a stiffened state at physiological temperatures with resistance to shear thinning, higher toughness, and reduced erosion rates and creep compliance. Protein‐polymer triblock copolymers capable of the responsive self‐assembly of two orthogonal networks are synthesized. Midblock association forms a shear‐thinning network, while endblock aggregation at elevated temperatures introduces a second, independent physical network into the protein hydrogel. These reversible crosslinks introduce extremely long relaxation times and lead to a five‐fold increase in the elastic modulus, significantly larger than is expected from transient network theory. Thermoresponsive reinforcement reduces the high temperature creep compliance by over four orders of magnitude, decreases the erosion rate by at least a factor of five, and increases the yield stress by up to a factor of seven. Combined with the demonstrated potential of shear thinning artificial protein hydrogels for various uses, this reinforcement mechanism broadens the range of applications that can be addressed with shear‐thinning physical gels.     

Tacky Elastomers to Enable Tear‐Resistant and Autonomous Self‐Healing Semiconductor Composites

Mechanical failure of π‐conjugated polymer thin films is unavoidable under cyclic loading conditions, due to intrinsic defects and poor resistance to crack propagation. Here, the first tear‐resistant and room‐temperature self‐healable semiconducting composite is presented, consisting of conjugated polymers and butyl rubber elastomers. This new composite displays both a record‐low elastic modulus (<1 MPa) and ultrahigh deformability with fracture strain above 800%. More importantly, failure behavior is not sensitive to precut notches under deformation. Autonomous self‐healing at room temperature, both mechanical and electronic, is demonstrated through the physical contact of two separate films. The composite film also shows device stability in the ambient environment over 5 months due to much‐improved barrier property to both oxygen and water. Butyl rubber is broadly applicable to various p‐type and n‐type semiconducting polymers for fabricating self‐healable electronics to provide new resilient electronics that mimic the tear resistance and healable property of human skin.     

Full Recovery of Fracture Toughness Using a Nontoxic Solvent‐Based Self‐Healing System

Two significant advances are reported for solvent‐based self‐healing of epoxy materials. First, an autonomic system yielding complete recovery of fracture toughness after crack propagation was achieved by embedding microcapsules containing a mixture of epoxy monomer and solvent into an epoxy matrix. Healing with epoxy‐solvent microcapsules is superior to capsules that contain solvent alone, and multiple healing events are reported for this system. Second, efficient healing is reported for new solvents, including aromatic esters, which are significantly less toxic than the previously employed solvent, chlorobenzene. Preliminary aging studies using either chlorobenzene or ethyl phenylacetate as the solvent demonstrate the stability of the epoxy‐solvent system under ambient conditions for at least one month.     

Tough and Self‐Recoverable Thin Hydrogel Membranes for Biological Applications

Tough and self‐recoverable hydrogel membranes with micrometer‐scale thickness are promising for biomedical applications, which, however, rarely be realized due to the intrinsic brittleness of hydrogels. In this work, for the first time, by combing noncovalent DN strategy and spin‐coating method, we successfully fabricated thin (thickness: 5–100 µm), yet tough (work of extension at fracture: 10⁵–10⁷ J m^?3) and 100% self‐recoverable hydrogel membranes with high water content (62–97 wt%) in large size (≈100 cm²). Amphiphilic triblock copolymers, which form physical gels by self‐assembly, were used for the first network. Linear polymers that physically associate with the hydrophilic midblocks of the first network, were chosen for the second network. The inter‐network associations serve as reversible sacrificial bonds that impart toughness and self‐recovery properties on the hydrogel membranes. The excellent mechanical properties of these obtained tough and thin gel membranes are comparable, or even superior to many biological membranes. The in vitro and in vivo tests show that these hydrogel membranes are biocompatible, and postoperative nonadhesive to neighboring organs. The excellent mechanical and biocompatible properties make these thin hydrogel membranes potentially suitable for use as biological or postoperative antiadhesive membranes.