High‐Throughput Combinatorial Optimizations of Perovskite Light‐Emitting Diodes Based on All‐Vacuum Deposition

Light‐emitting diodes (LEDs) based on lead halide perovskites demonstrate outstanding optoelectronic properties and are strong competitors for display and lighting applications. While previous halide perovskite LEDs are mainly produced via solution processing, here an all‐vacuum processing method is employed to construct CsPbBr₃ LEDs because vacuum processing exhibits high reliability and easy integration with existing OLED facilities for mass production. The high‐throughput combinatorial strategies are further adopted to study perovskite composition, annealing temperature, and functional layer thickness, thus significantly speeding up the optimization process. The best rigid device shows a current efficiency (CE) of 4.8 cd A^?1 (EQE of 1.45%) at 2358 cd m^?2, and best flexible device shows a CE of 4.16 cd A^?1 (EQE of 1.37%) at 2012 cd m^?2 with good bending tolerance. Moreover, by choosing NiO_x as the hole‐injection layer, the CE is improved to 10.15 cd A^?1 and EQE is improved to a record of 3.26% for perovskite LEDs produced by vacuum deposition. The time efficient combinatorial approaches can also be applied to optimize other perovskite LEDs.     

Suppressing Ion Migration Enables Stable Perovskite Light‐Emitting Diodes with All‐Inorganic Strategy

Stability issue is one of the major concerns that limit emergent perovskite light‐emitting diodes (PeLEDs) techniques. Generally, ion migration is considered as the most important origin of PeLEDs degradation. In this work, an all‐inorganic device architecture, LiF/perovskite/LiF/ZnS/ZnSe, is proposed to address this imperative problem. The inorganic (Cs_1?xRb_x)_1?yK_yPbBr₃ perovskite is optimized with achieving a photoluminescence quantum yield of 67%. Depth profile analysis of X‐ray photoelectron spectroscopy indicates that the LiF/perovskite/LiF structure and the ZnS/ZnSe cascade electron transport layers significantly suppress the electric‐field‐induced ion migrations of the perovskite layers, and impede the diffusion of metallic atoms from cathode into perovskites. The as‐prepared PeLEDs display excellent shelf stability (maintaining 90% of the initial external quantum efficiency [EQE] after 264 h) and operational stability (half‐lifetime of about 255 h at an initial luminance of 120 cd m^?2). The devices also exhibit a maximum brightness of 15 6155 cd m^?2 and an EQE of 11.05%.     

All‐Inorganic Perovskite Nanocrystals for High‐Efficiency Light Emitting Diodes: Dual‐Phase CsPbBr3‐CsPb2Br5 Composites

A dual‐phase all‐inorganic composite CsPbBr₃‐CsPb₂Br₅ is developed and applied as the emitting layer in LEDs, which exhibited a maximum luminance of 3853 cd m^–2, with current density (CE) of ≈8.98 cd A^–1 and external quantum efficiency (EQE) of ≈2.21%, respectively. The parasite of secondary phase CsPb₂Br₅ nanoparticles on the cubic CsPbBr₃ nanocrystals could enhance the current efficiency by reducing diffusion length of excitons on one side, and decrease the trap density in the band gap on the other side. In addition, the introduction of CsPb₂Br₅ nanoparticles could increase the ionic conductivity by reducing the barrier against the electronic and ionic transport, and improve emission lifetime by decreasing nonradiative energy transfer to the trap states via controlling the trap density. The dual‐phase all‐inorganic CsPbBr₃‐CsPb₂Br₅ composite nanocrystals present a new route of perovskite material for advanced light emission applications.     

Low Roll‐Off Perovskite Quantum Dot Light‐Emitting Diodes Achieved by Augmenting Hole Mobility

The external quantum efficiencies (EQEs) of perovskite quantum dot light‐emitting diodes (QD‐LEDs) are close to the out‐coupling efficiency limitation. However, these high‐performance QD‐LEDs still suffer from a serious issue of efficiency roll‐off at high current density. More injected carriers produce photons less efficiently, strongly suggesting the variation of ratio between radiative and non‐radiative recombination. An approach is proposed to balance the carrier distribution and achieve high EQE at high current density. The average interdot distance between QDs is reduced and this facilitates carrier transport in QD films and thus electrons and holes have a balanced distribution in QD layers. Such encouraging results augment the proportion of radiative recombination, make devices with peak EQE of 12.7%, and present a great device performance at high current density with an EQE roll‐off of 11% at 500 mA cm^?2 (the lowest roll‐off known so far) where the EQE is still over 11%.     

Scalable All‐Evaporation Fabrication of Efficient Light‐Emitting Diodes with Hybrid 2D–3D Perovskite Nanostructures

Quasi‐2D (Q2D) lead halide perovskites have emerged as promising materials for light‐emitting diodes (LEDs) due to their tunable emission, slowed‐down carrier diffusion, and improved stability. However, they are primarily fabricated through solution methods, which hinders its large‐scale manufacture and practical applications. Physical‐vapor‐deposition (PVD) methods have well demonstrated the capability for reproducible, scalable, and layer‐by‐layer fabrication of high quality organic/inorganic thin films. Herein, for the first time, the full‐evaporation fabrication of organic–inorganic hybrid ((BA)₂Cs_n?1Pb_nBr_3n+1) Q2D–3D PeLEDs is demonstrated. The morphology and crystal phase of the perovskite are controlled from 3D to 2D by modulating material composition, annealing temperature, and film thicknesses. The confinement of carriers in 3D layers and the energy funnel effect are discovered and discussed. Importantly, a record high external quantum efficiency (EQE) of 5.3% based on evaporation method is achieved. Moreover, a centimeter‐scale PeLED (1.5 cm × 2 cm) is obtained. Furthermore, the T₅₀ lifetime of the device with an initial brightness of 100 cd m^?2 is found to be 90 min with a thin layer PMMA passivation, which is among the longest for all PVD processed PeLEDs. Overall, this work casts a solid stepping stone towards the fabrication of high‐performance PeLEDs on a large‐scale.     

All‐Inorganic CsPbI3 Perovskite Phase‐Stabilized by Poly(ethylene oxide) for Red‐Light‐Emitting Diodes

Despite the excellent photoelectronic properties of the all‐inorganic cesium lead iodide (CsPbI₃) perovskite, which does not contain volatile and hygroscopic organic components, only a few CsPbI₃ devices are developed mainly owing to the frequent formation of an undesirable yellow δ‐phase at room temperature. Herein, it is demonstrated that a small quantity of poly(ethylene oxide) (PEO) added to the precursor solution effectively inhibits the formation of the yellow δ‐phase during film preparation, and promotes the development of a black α‐phase at a low crystallization temperature. A systematic study reveals that a thin, dense, pinhole‐free CsPbI₃ film is produced in the α‐phase and is stabilized with PEO that effectively reduces the grain size during crystallization. A thin α‐phase CsPbI₃ film with excellent photoluminescence is successfully employed in a light‐emitting diode with an inverted configuration of glass substrate/indium tin oxide/zinc oxide/poly(ethyleneimine)/α‐CsPbI₃/poly(4‐butylphenyl‐diphenyl‐amine)/WO₃/Al, yielding the characteristic red emission of the perovskite film at 695 nm with brightness, external quantum efficiency, and emission band width of ≈101 cd m^?2, 1.12%, and 32 nm, respectively.     

Organometal Halide Perovskite Quantum Dot Light‐Emitting Diodes

Organometal halide perovskites quantum dots (OHP‐QDs) with bright, color‐tunable, and narrow‐band photoluminescence have significant advantages in display, lighting, and laser applications. Due to sparse concentrations and difficulties in the enrichment of OHP‐QDs, production of large‐area uniform films of OHP‐QDs is a challenging task, which largely impedes their use in electroluminescence devices. Here, a simple dip‐coating method has been reported to effectively fabricate large‐area uniform films of OHP‐QDs. Using this technique, multicolor OHP‐QDs light‐emitting diodes (OQ‐LEDs) emitting in blue, blue‐green, green, orange, and red color have been successfully produced by simply tuning the halide composition or size of QDs. The blue, green, and red OQ‐LEDs exhibited, respectively, a maximum luminance of 2673, 2398, and 986 cd m^?2 at a current efficiency of 4.01, 3.72, and 1.52 cd A^?1, and an external quantum efficiency of 1.38%, 1.06%, and 0.53%, which are much better than most LEDs based on OHP films. The packaged OQ‐LEDs show long‐term stability in air (humidity ≈50%) for at least 7 d. The results demonstrate the great potential of the dip‐coating method to fabricate large‐area uniform films for various QDs. The high‐efficiency OQ‐LEDs also demonstrate the promising potential of OHP‐QDs for low‐cost display, lighting, and optical communication applications.     

Stoichiometry Control for the Tuning of Grain Passivation and Domain Distribution in Green Quasi‐2D Metal Halide Perovskite Films and Light‐Emitting Diodes

Quasi‐2D metal halide perovskite films are promising for efficient light‐emitting diodes (LEDs), because of their efficient radiative recombination and suppressed trap‐assisted quenching compared with pure 3D perovskites. However, because of the multidomain polycrystalline nature of solution‐processed quasi‐2D perovskite films, the composition engineering always impacts the emitting properties with complicated mechanisms. Here, defect passivation and domain distribution of quasi‐2D perovskite films prepared with various precursor compositions are systematically studied. As a result, in perovskite films prepared from stoichiometric quasi‐2D precursor compositions, large organic ammonium cations function well as passivators. In comparison, precursor compositions of simply adding large organic halide salt into a 3D perovskite precursor ensure not only the defect passivation but also the effective formation of quasi‐2D perovskite domains, avoiding unfavorable appearance of low‐order domains. Quasi‐2D perovskite films fabricated with a well‐designed precursor composition achieve a high photoluminescence quantum yield of 95.3% and an external quantum efficiency of 14.7% in LEDs.     

Candle Light‐Style Organic Light‐Emitting Diodes

In response to the call for a physiologically‐friendly light at night that shows low color temperature, a candle light‐style organic light emitting diode (OLED) is developed with a color temperature as low as 1900 K, a color rendering index (CRI) as high as 93, and an efficacy at least two times that of incandescent bulbs. In addition, the device has a 80% resemblance in luminance spectrum to that of a candle. Most importantly, the sensationally warm candle light‐style emission is driven by electricity in lieu of the energy‐wasting and greenhouse gas emitting hydrocarbon‐burning candles invented 5000 years ago. This candle light‐style OLED may serve as a safe measure for illumination at night. Moreover, it has a high color rendering index with a decent efficiency.     

Localized Surface Plasmon Enhanced All‐Inorganic Perovskite Quantum Dot Light‐Emitting Diodes Based on Coaxial Core/Shell Heterojunction Architecture

This work presents a strategy of combining the concepts of localized surface plasmons (LSPs) and core/shell nanostructure configuration in a single perovskite light‐emitting diode (PeLED) to addresses simultaneously the emission efficiency and stability issues facing current PeLEDs' challenges. Wide bandgap n‐ZnO nanowires and p‐NiO are employed as the carrier injectors, and also the bottom/upper protection layers to construct coaxial core/shell heterostructured CsPbBr₃ quantum dots LEDs. Through embedding plasmonic Au nanoparticles into the device and thickness optimization of the MgZnO spacer layer, an emission enhancement ratio of 1.55 is achieved. The best‐performing plasmonic PeLED reaches up a luminance of 10 206 cd m^?2, an external quantum efficiency of ≈4.626%, and a current efficiency of 8.736 cd A^?1. The underlying mechanisms for electroluminescence enhancement are associated with the increased spontaneous emission rate and improved internal quantum efficiency induced by exciton–LSP coupling. More importantly, the proposed PeLEDs, even without encapsulation, present a substantially improved operation stability against water and oxygen degradation (30‐day storage in air ambient, 85% humidity) compared with any previous reports. It is believed that the experimental results obtained will provide an effective strategy to enhance the performance of PeLEDs, which may push forward the application of such kind of LEDs.     

Metal Halide Perovskite Light‐Emitting Devices: Promising Technology for Next‐Generation Displays

As the requirements and expectation for displays in society are growing, higher standards of the display technology are proposed, including wider color gamut, higher color purity, and higher resolution. The recent emergence of light‐emitting halide perovskites has come with numerous advantages, such as high charge‐carrier mobility, tunable emission wavelength, narrow emission linewidth, and intrinsically high photoluminescence quantum yield. Recent advancement of perovskite‐based light‐emitting diodes (PeLEDs) as a promising technology for next‐generation displays is reviewed. Here, how the attractive optical and electrical properties of perovskite materials can be translated into high PeLED performance are discussed, and working mechanisms and optimization approaches of both perovskite materials and the respective devices are analyzed. On the material side this includes the control of size and composition of perovskites grains and nanocrystals, surface and interface passivation, doping and alloying, while on the device side this includes the interfacial engineering and energy level adjustments, and photon emission enhancement. Several challenges such as performance of blue PeLEDs, the environmental and operational stability of PeLEDs, and the toxicity issues of lead halide perovskites are discussed, and perspectives on future developments of perovskite materials and PeLEDs for the display technology are offered.     

Alternating‐Current MXene Polymer Light‐Emitting Diodes

MXenes (Ti₃C₂) are 2D transition‐metal carbides and carbonitrides with high conductivity and optical transparency. However, transparent MXene electrodes suitable for polymer light‐emitting diodes (PLEDs) have rarely been demonstrated. With the discovery of the excellent electrical stability of MXene under an alternating current (AC), herein, PLEDs that employ MXene electrodes and exhibit high performance under AC operation (AC MXene PLEDs) are presented. The PLED exhibits a turn‐on voltage, current efficiency, and brightness of 2.1 V, 7 cd A^?1, and 12 547 cd m^?2, respectively, when operated under AC with a frequency of 1 kHz. The results indicate that the undesirable electric breakdown associated with heat arising from the poor interface of the MXene with a hole transport layer in the direct‐current mode is efficiently suppressed by the transient injection of carriers accompanied by the alternating change of the electric polarity under the AC, giving rise to reliable light emission with a high efficiency. The solution‐processable MXene electrode can be readily fabricated on a flexible polymer substrate, allowing for the development of a mechanically flexible AC MXene PLED with a higher performance than flexible PLEDs employing solution‐processed nanomaterial‐based electrodes such as carbon nanotubes, reduced graphene oxide, and Ag nanowires.     

Solution‐Processed Extremely Efficient Multicolor Perovskite Light‐Emitting Diodes Utilizing Doped Electron Transport Layer

A specially designed n‐type semiconductor consisting of Ca‐doped ZnO (CZO) nanoparticles is used as the electron transport layer (ETL) in high‐performance multicolor perovskite light‐emitting diodes (PeLEDs) fabricated using an all‐solution process. The band structure of the ZnO is tailored via Ca doping to create a cascade of conduction energy levels from the cathode to the perovskite. This energy band alignment significantly enhances conductivity and carrier mobility in the CZO ETL and enables controlled electron injection, giving rise to sub‐bandgap turn‐on voltages of 1.65 V for red emission, 1.8 V for yellow, and 2.2 V for green. The devices exhibit significantly improved luminance yields and external quantum efficiencies of, respectively, 19 cd A^?1 and 5.8% for red emission, 16 cd A^?1 and 4.2% for yellow, and 21 cd A^?1 and 6.2% for green. The power efficiencies of these multicolor devices demonstrated in this study, 30 lm W^?1 for green light‐emitting PeLED, 28 lm W^?1 for yellow, and 36 lm W^?1 for red are the highest to date reported. In addition, the perovskite layers are fabricated using a two‐step hot‐casting technique that affords highly continuous (>95% coverage) and pinhole‐free thin films. By virtue of the efficiency of the ETL and the uniformity of the perovskite film, high brightnesses of 10 100, 4200, and 16,060 cd m^?2 are demonstrated for red, yellow, and green PeLEDs, respectively. The strategy of using a tunable ETL in combination with a solution process pushes perovskite‐based materials a step closer to practical application in multicolor light‐emitting devices.     

Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes Based on Potassium Passivated Nanocrystals

Metal halide perovskites have aroused tremendous interest in the past several years for their promising applications in display and lighting. However, the development of blue perovskite light‐emitting diodes (PeLEDs) still lags far behind that of their green and red cousins due to the difficulty in obtaining high‐quality blue perovskite emissive layers. In this study, a simple approach is conceived to improve the emission and electrical properties of blue perovskites. By introducing an alkali metal ion to occupy some sites of peripheral suspended organic ligands, the nonradiative recombination is suppressed, and, consequently, blue CsPb(Br/Cl)₃ nanocrystals with a high photoluminescence quantum efficiency of 38.4% are obtained. The introduced K⁺ acts as a new type of metal ligand, which not only suppresses nonradiative pathways but also improves the charge carrier transport of the perovskite nanocrystals. With further engineering of the device structure to balance the charge injection rate, a spectrally stable and efficient blue PeLED with a maximum external quantum efficiency of 1.96% at the emission peak of 477 nm is fabricated.     

Facile Assembly of High‐Quality Organic–Inorganic Hybrid Perovskite Quantum Dot Thin Films for Bright Light‐Emitting Diodes

Organic‐inorganic hybrid perovskite (CH₃NH₃PbX₃, X = Cl, Br or I) quantum dots (QDs) have shown superior optoelectronic properties and have been regarded as a most ideal material for next‐generation optoelectronic devices, particularly for QDs‐based light‐emitting diodes (QLEDs). However, there are only a few reports on CH₃NH₃PbX₃ QLEDs and the reported performance is still very poor, primarily due to the difficulties in the fabrication of high‐quality compact QDs thin films. In this work, an electric‐field‐assisted strategy is developed for efficient fabrication of uniform CH₃NH₃PbBr₃ QDs thin films with high photoluminescence quantum yields (PLQY, 80%–90%) from dilute CH₃NH₃PbBr₃ QDs suspensions (≈0.1 mg mL^‐1) within 5 mins. Benefited from the high‐quality CH₃NH₃PbBr₃ QDs thin films, the corresponding QLEDs deliver a highly bright green emission with maximum luminances of 12450 cd m². Furthermore, a current efficiency of 12.7 cd A^‐1, a power efficiency of 9.7 lm W^‐1, and an external quantum efficiency (EQE) of 3.2% were acheived by enhancing the hole injection. This performance represents the best results for CH₃NH₃PbBr₃ QDs‐based QLEDs reported to date. These results indicate an important progress in the fabrication of high‐performance CH₃NH₃PbX₃ QLEDs and demonstrate their huge potential for next‐generation displays and lighting.     

Efficient Blue Perovskite Light‐Emitting Diodes Boosted by 2D/3D Energy Cascade Channels

Lead halide perovskite, as an emerging semiconductor, provides a fire‐new opportunity for high‐definition display and solid‐state lighting. Earthshaking improvements are implemented in green, red, and near‐infrared perovskite light‐emitting diodes (PeLEDs). However, blue PeLEDs are still far behind in performance, which restricts the development of PeLEDs in practical applications. Herein, a facile energy cascade channel strategy via one‐step self‐organized and controllable 2D/3D perovskite preparation by introducing guanidine hydrobromide (GABr) is developed that greatly improves the efficiency of blue PeLEDs. The 2D/3D perovskite structure boosts the energy cascade to induce energy transfer from the wide into the narrow bandgap domains and inhibit free charge diffusion, which increases the density of electrons and holes, and enhances the radiative recombination. Profiting from this energy cascade channels, the external quantum efficiency of blue PeLEDs, emitting at 492 nm, is considerably enhanced from 1.5% of initial blue device to 8.2%. In addition, device operating stability under ambient conditions is also improved by 2.6‐fold. The one‐step self‐organized 2D/3D hybrid perovskites induced by GABr pave a new and simple route toward high‐performance blue emission PeLEDs.     

Co‐Interlayer Engineering toward Efficient Green Quasi‐Two‐Dimensional Perovskite Light‐Emitting Diodes

With respect to three‐dimensional (3D) perovskites, quasi‐two‐dimensional (quasi‐2D) perovskites have unique advantages in light‐emitting devices (LEDs), such as strong exciton binding energy and good phase stability. Interlayer ligand engineering is a key issue to endow them with these properties. Rational design principles for interlayer materials and their processing techniques remain open to investigation. A co‐interlayer engineering strategy is developed to give efficient quasi‐2D perovskites by employing phenylbutylammonium bromide (PBABr) and propylammonium bromide (PABr) as the ligand materials. Preparation of these co‐interlayer quasi‐2D perovskite films is simple and highly controllable without using antisolvent treatment. Crystallization and morphology are readily manipulated by tuning the ratio of co‐interlayer components. Various optical techniques, including steady and ultrafast transient absorption and photoluminescence spectroscopies, are used to investigate their excitonic properties. Photoluminescence quantum yield (PLQY) of the perovskite film is dramatically improved to 89% due to the combined optimization of exciton binding energy and suppression of trap state formation. Accordingly, a high current efficiency of 66.1 cd A^?1 and an external quantum efficiency of 15.1% are achieved for green co‐interlayer quasi‐2D perovskite LEDs without using any light out‐coupling techniques, indicating that co‐interlayer engineering is a simple and effective approach to develop high‐performance perovskite electroluminescence devices.