Mechanistic Insights on Ternary Ni2−xCoxP for Hydrogen Evolution and Their Hybrids with Graphene as Highly Efficient and Robust Catalysts for Overall Water Splitting

Searching the high‐efficient, stable, and earth‐abundant electrocatalysts to replace the precious noble metals holds the promise for practical utilizations of hydrogen and oxygen evolution reactions (HER and OER). Here, a series of highly active and robust Co‐doped nickel phosphides (Ni_2?xCo_xP) catalysts and their hybrids with reduced graphene oxide (rGO) are developed as bifunctional catalysts for both HER and OER. The Co‐doping in Ni₂P and their hybridization with rGO effectively regulate the catalytic activity of the surface active sites, accelerate the charge transfer, and boost their superior catalytic activity. Density functional theory calculations show that the Co‐doped catalysts deliver the moderate trapping of atomic hydrogen and facile desorption of the generated H₂ due to the H‐poisoned surface active sites of Ni_2?xCo_xP under the real catalytic process. Electrochemical measurements reveal the high HER efficiency and durability of the NiCoP/rGO hybrids in electrolytes with pH 0–14. Coupled with the remarkable and robust OER activity of the NiCoP/rGO hybrids, the practical utilization of the NiCoP/rGO‖NiCoP/rGO for overall water splitting yields a catalytic current density of 10 mA cm^?2 at 1.59 V over 75 h without an obvious degradation and Faradic efficiency of ≈100% in a two‐electrode configuration and 1.0 m KOH.     

Overall Water Splitting Catalyzed Efficiently by an Ultrathin Nanosheet‐Built,Hollow Ni3S2‐Based Electrocatalyst

Making highly efficient catalysts for an overall ?water splitting reaction is vitally important to bring solar/electrical‐to‐hydrogen energy conversion processes into reality. Herein, the synthesis of ultrathin nanosheet‐based, hollow MoO_x/Ni₃S₂ composite microsphere catalysts on nickel foam, using ammonium molybdate as a precursor and the triblock copolymer pluronic P123 as a structure‐directing agent is reported. It is also shown that the resulting materials can serve as bifunctional, non‐noble metal electrocatalysts with high activity and stability for the hydrogen evolution reaction (HER) as well as the oxygen evolution reaction (OER). Thanks to their unique structural features, the materials give an impressive water‐splitting current density of 10 mA cm^?2 at ≈1.45 V with remarkable durability for >100 h when used as catalysts both at the cathode and the anode sides of an alkaline electrolyzer. This performance for an overall water splitting reaction is better than even those obtained with an electrolyzer consisting of noble metal‐based Pt/C and IrO_x/C catalytic couple—the benchmark catalysts for HER and OER, respectively.     

Nanoporous Nitrogen‐Doped Graphene Oxide/Nickel Sulfide Composite Sheets Derived from a Metal‐Organic Framework as an Efficient Electrocatalyst for Hydrogen and Oxygen Evolution

Engineering of controlled hybrid nanocomposites creates one of the most exciting applications in the fields of energy materials and environmental science. The rational design and in situ synthesis of hierarchical porous nanocomposite sheets of nitrogen‐doped graphene oxide (NGO) and nickel sulfide (Ni₇S₆) derived from a hybrid of a well‐known nickel‐based metal‐organic framework (NiMOF‐74) using thiourea as a sulfur source are reported here. The nanoporous NGO/MOF composite is prepared through a solvothermal process in which Ni(II) metal centers of the MOF structure are chelated with nitrogen and oxygen functional groups of NGO. NGO/Ni₇S₆ exhibits bifunctional activity, capable of catalyzing both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) with excellent stability in alkaline electrolytes, due to its high surface area, high pore volume, and tailored reaction interface enabling the availability of active nickel sites, mass transport, and gas release. Depending on the nitrogen doping level, the properties of graphene oxide can be tuned toward, e.g., enhanced stability of the composite compared to commonly used RuO₂ under OER conditions. Hence, this work opens the door for the development of effective OER/HER electrocatalysts based on hierarchical porous graphene oxide composites with metal chalcogenides, which may replace expensive commercial catalysts such as RuO₂ and IrO₂.     

Physically Adsorbed Metal Ions in Porous Supports as Electrocatalysts for Oxygen Evolution Reaction

Developing highly efficient and earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is significantly important for water‐splitting. Here, for the first time it is reported that the physically adsorbed metal ions (PAMI) in porous materials can be served as highly efficient OER electrocatalysts, which provides a universal PAMI method to develop electrocatalysts. This PAMI method can be applied to almost all porous supports, including graphene, carbon nanotubes, C₃N₄, CaCO₃, and porous organic polymers and all the systems exhibit excellent OER performance. In particular, the as‐synthesized Co_0.7Fe_0.3CB exhibits a small overpotential of 295 mV and 350 mV at the current density of 10 mA cm^?2 and 100 mA cm^?2, respectively, which exceeds commercial 40 wt% IrO₂/CB and most reported non‐noble metal‐based OER catalysts. Moreover, the mass activity of Co_0.7Fe_0.3CB reaches 643.4 A g^?1 at the overpotential of 320 mV, which is nearly 4.7 times higher than that of 40 wt% IrO₂/CB. In addition, the advanced ex situ and in situ synchrotron X‐ray characterizations are carried out to unravel the PAMI synthetic process. In short, this PAMI method will break the conversional understanding, i.e., the most OER catalysts are synthesized chemically, because the new PAMI method does not require any chemical synthesis, which therefore opens a new avenue for the development of OER electrocatalysts.     

Fe3C‐Co Nanoparticles Encapsulated in a Hierarchical Structure of N‐Doped Carbon as a Multifunctional Electrocatalyst for ORR,OER, and HER

Rational design of non‐noble metal catalysts with robust and durable electrocatalytic activity for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) is extremely important for renewable energy conversion and storage, regenerative fuel cells, rechargeable metal–air batteries, water splitting etc. In this work, a unique hybrid material consisting of Fe₃C and Co nanoparticles encapsulated in a nanoporous hierarchical structure of N‐doped carbon (Fe₃C‐Co/NC) is fabricated for the first time via a facile template‐removal method. Such an ingenious structure shows great features: the marriage of 1D carbon nanotubes and 2D carbon nanosheets, abundant active sites resulting from various active species of Fe₃C, Co, and NC, mesoporous carbon structure, and intimate integration among Fe₃C, Co, and NC. As a multifunctional electrocatalyst, the Fe₃C‐Co/NC hybrid exhibits excellent performance for ORR, OER, and HER, outperforming most of reported triple functional electrocatalysts. This study provides a new perspective to construct multifunctional catalysts with well‐designed structure and superior performance for clean energy conversion technologies.     

Hierarchical Porous NC@CuCo Nitride Nanosheet Networks: Highly Efficient Bifunctional Electrocatalyst for Overall Water Splitting and Selective Electrooxidation of Benzyl Alcohol

Highly active and stable bifunctional electrocatalysts for overall water splitting are important for clean and renewable energy technologies. The development of energy‐saving electrocatalysts for hydrogen evolution reaction (HER) by replacing the sluggish oxygen evolution reaction (OER) with a thermodynamically favorable electrochemical oxidation (ECO) reaction has attracted increasing attention. In this study, a self‐supported, hierarchical, porous, nitrogen‐doped carbon (NC)@CuCo₂N_x/carbon fiber (CF) is fabricated and used as an efficient bifunctional electrocatalyst for both HER and OER in alkaline solutions with excellent activity and stability. Moreover, a two‐electrode electrolyzer is assembled using the NC@CuCo₂N_x/CF as an electrocatalyst at both cathode and anode electrodes for H₂ production and selective ECO of benzyl alcohol with high conversion and selectivity. The excellent electrocatalytic activity is proposed to be mainly due to the hierarchical architecture beneficial for exposing more catalytic active sites, enhancing mass transport. Density functional theoretical calculations reveal that the adsorption energies of key species can be modulated due to the synergistic effect between CoN and CuN. This work provides a reference for the development of high‐performance bifunctional electrocatalysts for simultaneous production of H₂ and high‐value‐added fine chemicals.     

Metal‐Organic Frameworks Derived Nanotube of Nickel–Cobalt Bimetal Phosphides as Highly Efficient Electrocatalysts for Overall Water Splitting

The design of highly efficient, stable, and noble‐metal‐free bifunctional electrocatalysts for overall water splitting is critical but challenging. Herein, a facile and controllable synthesis strategy for nickel–cobalt bimetal phosphide nanotubes as highly efficient electrocatalysts for overall water splitting via low‐temperature phosphorization from a bimetallic metal‐organic framework (MOF‐74) precursor is reported. By optimizing the molar ratio of Co/Ni atoms in MOF‐74, a series of Cox Niy P catalysts are synthesized, and the obtained Co4Ni1P has a rare form of nanotubes that possess similar morphology to the MOF precursor and exhibit perfect dispersal of the active sites. The nanotubes show remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic performance in an alkaline electrolyte, affording a current density of 10 mA cm^?2 at overpotentials of 129 mV for HER and 245 mV for OER, respectively. An electrolyzer with Co4Ni1P nanotubes as both the cathode and anode catalyst in alkaline solutions achieves a current density of 10 mA cm^?2 at a voltage of 1.59 V, which is comparable to the integrated Pt/C and RuO₂ counterparts and ranks among the best of the metal‐phosphide electrocatalysts reported to date.     

Fe3O4‐Decorated Co9S8 Nanoparticles In Situ Grown on Reduced Graphene Oxide: A New and Efficient Electrocatalyst for Oxygen Evolution Reaction

Cobalt sulfide materials have attracted enormous interest as low‐cost alternatives to noble‐metal catalysts capable of catalyzing both oxygen reduction and oxygen evolution reactions. Although recent advances have been achieved in the development of various cobalt sulfide composites to expedite their oxygen reduction reaction properties, to improve their poor oxygen evolution reaction (OER) activity is still challenging, which significantly limits their utilization. Here, the synthesis of Fe₃O₄‐decorated Co₉S₈ nanoparticles in situ grown on a reduced graphene oxide surface (Fe₃O₄@Co₉S₈/rGO) and the use of it as a remarkably active and stable OER catalyst are first reported. Loading of Fe₃O₄ on cobalt sulfide induces the formation of pure phase Co₉S₈ and highly improves the catalytic activity for OER. The composite exhibits superior OER performance with a small overpotential of 0.34 V at the current density of 10 mA cm^?2 and high stability. It is believed that the electron transfer trend from Fe species to Co₉S₈ promotes the breaking of the Co–O bond in the stable configuration (Co–O–O superoxo group), attributing to the excellent catalytic activity. This development offers a new and effective cobalt sulfide‐based oxygen evolution electrocatalysts to replace the expensive commercial catalysts such as RuO₂ or IrO₂.     

Autogenous Growth of Hierarchical NiFe(OH)x/FeS Nanosheet‐On‐Microsheet Arrays for Synergistically Enhanced High‐Output Water Oxidation

Practical electrochemical water splitting requires cost‐effective electrodes capable of steadily working at high output, leading to the challenges for efficient and stable electrodes for the oxygen evolution reaction (OER). Herein, by simply using conductive FeS microsheet arrays vertically pre‐grown on iron foam (FeS/IF) as both substrate and source to in situ form vertically aligned NiFe(OH)_x nanosheets arrays, a hierarchical electrode with a nano/micro sheet‐on‐sheet structure (NiFe(OH)_x/FeS/IF) can be readily achieved to meet the requirements. Such hierarchical electrode architecture with a superhydrophilic surface also allows for prompt gas release even at high output. As a result, NiFe(OH)_x/FeS/IF exhibits superior OER activity with an overpotential of 245 mV at 50 mA cm^?2 and can steadily output 1000 mA cm^?2 at a low overpotential of 332 mV. The water‐alkali electrolyzer using NiFe(OH)_x/FeS/IF as the anode can deliver 10 mA cm^?2 at 1.50 V and steadily operate at 300 mA cm^?2 with a small cell voltage for 70 h. Furthermore, a solar‐driven electrolyzer using the developed electrode demonstrates an exceptionally high solar‐to‐hydrogen efficiency of 18.6%. Such performance together with low‐cost Fe‐based materials and facile mass production suggest the present strategy may open up opportunities for rationally designing hierarchical electrocatalysts for practical water splitting or diverse applications.     

Promoting Active Sites in Core–Shell Nanowire Array as Mott–Schottky Electrocatalysts for Efficient and Stable Overall Water Splitting

Developing earth‐abundant, active, and robust electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remains a vital challenge for efficient conversion of sustainable energy sources. Herein, metal–semiconductor hybrids are reported with metallic nanoalloys on various defective oxide nanowire arrays (Cu/CuO_x, Co/CoO_x, and CuCo/CuCoO_x) as typical Mott–Schottky electrocatalysts. To build the highway of continuous electron transport between metals and semiconductors, nitrogen‐doped carbon (NC) has been implanted on metal–semiconductor nanowire array as core–shell conductive architecture. As expected, NC/CuCo/CuCoO_x nanowires arrays, as integrated Mott–Schottky electrocatalysts, present an overpotential of 112 mV at 10 mA cm^?2 and a low Tafel slope of 55 mV dec^?1 for HER, simultaneously delivering an overpotential of 190 mV at 10 mA cm^?2 for OER. Most importantly, NC/CuCo/CuCoO_x architectures, as both the anode and the cathode for overall water splitting, exhibit a current density of 10 mA cm^?2 at a cell voltage of 1.53 V with excellent stability due to high conductivity, large active surface area, abundant active sites, and the continuous electron transport from prominent synergetic effect among metal, semiconductor, and nitrogen‐doped carbon. This work represents an avenue to design and develop efficient and stable Mott–Schottky bifunctional electrocatalysts for promising energy conversion.     

Controlled Fabrication of Hierarchically Structured Nitrogen‐Doped Carbon Nanotubes as a Highly Active Bifunctional Oxygen Electrocatalyst

Hierarchically structured nitrogen‐doped carbon nanotube (NCNT) composites, with copper (Cu) nanoparticles embedded uniformly within the nanotube walls and cobalt oxide (Co_xO_y) nanoparticles decorated on the nanotube surfaces, are fabricated via a combinational process. This process involves the growth of Cu embedded CNTs by low‐ and high‐temperature chemical vapor deposition, post‐treatment with ammonia for nitrogen doping of these CNTs, precipitation‐assisted separation of NCNTs from cobalt nitrate aqueous solution, and finally thermal annealing for Co_xO_y decoration. Theoretical calculations show that interaction of Cu nanoparticles with CNT walls can effectively decrease the work function of CNT surfaces and improve adsorption of hydroxyl ions onto the CNT surfaces. Thus, the activities of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are significantly enhanced. Because of this benefit, further nitrogen doping, and synergistic coupling between Co_xO_y and NCNTs, Cu@NCNT/Co_xO_y composites exhibit ORR activity comparable to that of commercial Pt/C catalysts and high OER activity (outperforming that of IrO₂ catalysts). More importantly, the composites display superior long‐term stability for both ORR and OER. This simple but general synthesis protocol can be extended to design and synthesis of other metal/metal oxide systems for fabrication of high‐performance carbon‐based electrocatalysts with multifunctional catalytic activities.     

Atomic‐Scale CoOx Species in Metal–Organic Frameworks for Oxygen Evolution Reaction

The activity of electrocatalysts strongly depends on the number of active sites, which can be increased by downsizing electrocatalysts. Single‐atom catalysts have attracted special attention due to atomic‐scale active sites. However, it is a huge challenge to obtain atomic‐scale CoO_x catalysts. The Co‐based metal–organic frameworks (MOFs) own atomically dispersed Co ions, which motivates to design a possible pathway to partially on‐site transform these Co ions to active atomic‐scale CoO_x species, while reserving the highly porous features of MOFs. In this work, for the first time, the targeted on‐site formation of atomic‐scale CoO_x species is realized in ZIF‐67 by O₂ plasma. The abundant pores in ZIF‐67 provide channels for O₂ plasma to activate the Co ions in MOFs to on‐site produce atomic‐scale CoO_x species, which act as the active sites to catalyze the oxygen evolution reaction with an even better activity than RuO₂.     

Electronic and Vacancy Engineering of Mo–RuCoOx Nanoarrays for High-Efficiency Water Splitting (Adv. Funct. Mater. 40/2023)

Exploring efficient strategies to achieve novel high-efficiency catalysts for water splitting is of great significance to develop hydrogen energy technology. Herein, unique molybdenum (Mo)-doped ruthenium–cobalt oxide (Mo–RuCoO_x) nanosheet arrays are prepared as a high-performance bifunctional electrocatalyst toward hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through combining electronic and vacancy engineering. Theoretical calculations and experimental results reveal that the incorporation of Ru and Mo can effectively tune the electronic structure, and the controllable Mo dissolution coupling with the oxygen vacancy generation during surface reconstruction is able to optimize the adsorption energy of hydrogen/oxygen intermediates, thus greatly accelerating the kinetics for both HER and OER. As a result, the Mo–RuCoO_x nanoarrays exhibit remarkably low overpotentials of 41 and 156 mV at 10 mA cm⁻² for HER and OER in 1 m KOH, respectively. Furthermore, the two-electrode electrolyzer assembled by the Mo–RuCoO_x nanoarrays requires a cell voltage as low as 1.457 V to achieve 10 mA cm⁻² for alkaline overall water splitting. This work holds great promise to develop novel and highly active electrocatalysts for future energy conversion applications.     

Engineering an Earth‐Abundant Element‐Based Bifunctional Electrocatalyst for Highly Efficient and Durable Overall Water Splitting

The simultaneous and efficient evolution of hydrogen and oxygen with earth‐abundant, highly active, and robust bifunctional electrocatalysts is a significant concern in water splitting. Herein, non‐noble metal‐based Ni–Co–S bifunctional catalysts with tunable stoichiometry and morphology are realized. The engineering of electronic structure and subsequent morphological design synergistically contributes to significantly elevated electrocatalytic performance. Stable overpotentials (η₁₀) of 243 mV (vs reversible hydrogen electrode) for oxygen evolution reaction (OER) and 80 mV for hydrogen evolution reaction (HER), as well as Tafel slopes of 54.9 mV dec^?1 for OER and 58.5 mV dec^?1 for HER, are demonstrated. In addition, density functional theory calculations are performed to determine the optimal electronic structure via the electron density differences to verify the enhanced OER activity is related to the Co top site on the (110) surface. Moreover, the tandem bifunctional NiCo₂S₄ exhibit a required voltage of 1.58 V (J = 10 mA cm^?2) for simultaneous OER and HER, and no obvious performance decay is observed after 72 h. When integrated with a GaAs solar cell, the resulting photoassisted water splitting electrolyzer shows a certified solar‐to‐hydrogen efficiency of up to 18.01%, further demonstrating the feasibility of engineering protocols and the promising potential of bifunctional NiCo₂S₄ for large‐scale overall water splitting.     

Sub-2 nm Thiophosphate Nanosheets with Heteroatom Doping for Enhanced Oxygen Electrocatalysis

Developing an efficient bifunctional electrocatalyst with accelerated kinetics is important but challenging for rechargeable metal-air batteries. In this study, a series of anion-regulated sub-2 nm ultrathin thiophosphate nanosheets (NiPS_3–xSe_x NSs) is rationally designed and synthesized as bifunctional oxygen evolution/reduction reaction (OER/ORR) electrocatalysts for Zn-air batteries. The increase of nominal Se dopants (0 ≤ x ≤ 0.5) leads to the expansion of (001) crystal plane spacing and partially disordered structure generation after the incorporation of Se to pristine NiPS₃. More importantly, electronic structures of active sites can be reasonably regulated via coordination of the interaction between anions and cations. Density functional theory calculations reveal that such tailored electronic structures reduce the overpotential of the thermodynamic barriers step for both OER and ORR as well as shorten energy bandgap, which can accelerate reaction kinetics in electrocatalytic processes and enhance electrical conductivity. Consequently, the obtained NiPS_3–xSe_x NSs exhibit low OER overpotential (250 mV) and positive ORR onset potential (0.94 V), large power density (152 mW cm⁻²), and robust stability (96 h cycle) for Zn-air devices, far exceeding that of precious metal catalysts. This study provides a novel tactic to design earth-abundant and highly efficient bifunctional electrocatalysts for metal-air battery technologies.     

Self‐Powered Water‐Splitting Devices by Core–Shell NiFe@N‐Graphite‐Based Zn–Air Batteries

Development of highly efficient and low‐cost multifunctional electrocatalysts for the oxygen evolution reaction (OER), the oxygen reduction reaction (ORR), and the hydrogen evolution reaction is urgently required for energy storage and conversion applications, such as in Zn–air batteries and water splitting to replace very expansive noble metal catalysts. Here, the new core–shell NiFe@N‐graphite electrocatalysts with excellent electrocatalytic activity and stability toward OER and ORR are reported and the Ni_0.5Fe_0.5@N‐graphite electrocatalyst is applied as the air electrode in Zn–air batteries. The respective liquid Zn–air battery shows a large open‐circuit potential of 1.482 V and a small charge–discharge voltage gap of 0.12 V at 10 mA cm⁻², together with excellent cycling stability even after 40 h at 20 mA cm⁻². Interestingly, the all‐solid‐like Zn–air battery thus derived shows a highly desired mechanical flexibility, whereby little change is observed in the voltage when bent into different angles. Using the same Ni_0.5Fe_0.5@N‐graphite electrode, a self‐driven water‐splitting device, which is powered by two Zn–air batteries in‐series, is constructed. The present study opens a new opportunity for the rational design of metal@N‐graphite‐based catalysts of core–shell structures for electrochemical catalysts and renewable energy applications.     

Orienting Active Crystal Planes of New Class Lacunaris Fe2PO5 Polyhedrons for Robust Water Oxidation in Alkaline and Neutral Media

Developing efficient and stable oxygen evolution reaction (OER) electrocatalysts is essential for realizing sustainable energy conversion, such as solar fuels. Although modulating active sites and electron transfer is of great significance to boost electrocatalysis activity, it still remains a big challenge to desirably actualize this goal. Herein, engineering of active sites and electronic framework is implemented via oriented modulation of crystal planes and construction of lacunaris architecture supported by ammonification‐elicited simultaneous incorporation of nitrogen and oxygen‐defect strategy. The new class porous nitrogen‐incorporated Fe₂PO₅ with oxygen‐defect (N‐Fe₂PO_5–x) polyhedron with dominantly exposed {110} reactive facets exhibits superior performance toward water oxidation, achieving current densities of 10 mA cm^?2 at quite low overpotentials of 235 and 315 mV in alkaline and neutral media, respectively. Furthermore, density functional theoretical calculations reveal the energetically favorable {110} planes of lower absorption energy of intermediates and remolding of electronic density framework arising from the ammoniated elicitation process, contributing to excellent OER performance of lacunaris N‐Fe₂PO_5–x polyhedrons. This work may offer a feasible guideline for regulating active sites and electron transfer to develop low‐cost and highly efficient OER electrocatalysts in energy conversion systems.     

MO‐Co@N‐Doped Carbon (M = Zn or Co): Vital Roles of Inactive Zn and Highly Efficient Activity toward Oxygen Reduction/Evolution Reactions for Rechargeable Zn–Air Battery

A highly efficient bifunctional oxygen catalyst is required for practical applications of fuel cells and metal–air batteries, as oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are their core electrode reactions. Here, the MO‐Co@N‐doped carbon (NC, M = Zn or Co) is developed as a highly active ORR/OER bifunctional catalyst via pyrolysis of a bimetal metal–organic framework containing Zn and Co, i.e., precursor (CoZn). The vital roles of inactive Zn in developing highly active bifunctional oxygen catalysts are unraveled. When the precursors include Zn, the surface contents of pyridinic N for ORR and the surface contents of Co–N_x and Co³⁺/Co²⁺ ratios for OER are enhanced, while the high specific surface areas, high porosity, and high electrochemical active surface areas are also achieved. Furthermore, the synergistic effects between Zn‐based and Co‐based species can promote the well growth of multiwalled carbon nanotubes (MWCNTs) at high pyrolysis temperatures (≥700 °C), which is favorable for charge transfer. The optimized CoZn‐NC‐700 shows the highly bifunctional ORR/OER activity and the excellent durability during the ORR/OER processes, even better than 20 wt% Pt/C (for ORR) and IrO₂ (for OER). CoZn‐NC‐700 also exhibits the prominent Zn–air battery performance and even outperforms the mixture of 20 wt% Pt/C and IrO₂.     

A Cobalt‐Based Amorphous Bifunctional Electrocatalysts for Water‐Splitting Evolved from a Single‐Source Lazulite Cobalt Phosphate

Over the years, cobalt phosphates (amorphous or crystalline) have been projected as one of the most significant and promising classes of nonprecious catalysts and studied exclusively for the electrocatalytic and photocatalytic oxygen evolution reaction (OER). However, their successful utilization of hydrogen evolution reaction (HER) and the reaction of overall water‐splitting is rather unexplored. Herein, presented is a crystalline cobalt phosphate, Co₃(OH)₂(HPO₄)₂, structurally related to the mineral lazulite, as an efficient precatalyst for OER, HER, and water electrolysis in alkaline media. During both electrochemical OER and HER, the Co₃(OH)₂(HPO₄)₂ nanostructure was completely transformed in situ into porous amorphous CoO_x (OH) films that mediate efficient OER and HER with extremely low overpotentials of only 182 and 87 mV, respectively, at a current density of 10 mA cm^?2. When assemble as anode and cathode in a two‐electrode alkaline electrolyzer, unceasing durability over 10 days is achieved with a final cell voltage of 1.54 V, which is superior to the recently reported effective bifunctional electrocatalysts. The strategy to achieve more active sites for oxygen and hydrogen generation via in situ oxidation or reduction from a well‐defined inorganic material provides an opportunity to develop cost‐effective and efficient electrocatalysts for renewable energy technologies.     

Multifunctional Mo–N/C@MoS2 Electrocatalysts for HER,OER, ORR,and Zn–Air Batteries

Replacement of noble‐metal platinum catalysts with cheaper, operationally stable, and highly efficient electrocatalysts holds huge potential for large‐scale implementation of clean energy devices. Metal–organic frameworks (MOFs) and metal dichalcogenides (MDs) offer rich platforms for design of highly active electrocatalysts owing to their flexibility, ultrahigh surface area, hierarchical pore structures, and high catalytic activity. Herein, an advanced electrocatalyst based on a vertically aligned MoS₂ nanosheet encapsulated Mo–N/C framework with interfacial Mo–N coupling centers is reported. The hybrid structure exhibits robust multifunctional electrocatalytic activity and stability toward the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction. Interestingly, it further displays high‐performance of Zn–air batteries as a cathode electrocatalyst with a high power density of ≈196.4 mW cm^?2 and a voltaic efficiency of ≈63 % at 5 mA cm^?2, as well as excellent cycling stability even after 48 h at 25 mA cm^?2. Such outstanding electrocatalytic properties stem from the synergistic effect of the distinct chemical composition, the unique three‐phase active sites, and the hierarchical pore framework for fast mass transport. This work is expected to inspire the design of advanced and performance‐oriented MOF/MD hybrid‐based electrocatalysts for wider application in electrochemical energy devices.