Zr-MOF-Enabled Controllable Ion Sieving and Proton Conductivity in Flow Battery Membrane

Membrane with ordered channels is the key to controlling ion sieving and proton conductivity in flow batteries. However, it remains a great challenge for finely controlling the nanochannels of polymeric membranes. Herein, two types of acid-stable Zr-metal organic framework (MOF-801 and MOF-808) with variable pore structures and channel properties are introduced as fillers into a non-fluorinated sulfonated poly (ether ether ketone) (SPEEK). The membrane incorporated with MOF-801 of a smaller triangular window (≈3.5 Å) successfully translates the molecular sieving property into the flow battery membrane, resulting in enhanced coulombic efficiency (98.5–99.2%) at 40–120 mA cm⁻² compared with the pristine SPEEK membrane (97.1–98.5%). In contrast, more protophilic internal interconnected channels of MOF-808 yield faster proton highway, leading to a significant increase of voltage efficiency (93.7–84.1%) at 40–120 mA cm⁻² compared with the pristine SPEEK membrane (91.7–78.9%). By regulating the ion sieving and proton conductivity, MOF-801/MOF-808 binary composite membrane exhibits synchronously improved performance in the vanadium redox flow battery system. The revealed structure–property relationship in the Zr-MOFs-based membranes provides a general guideline to design new proton exchange membranes with ordered channels for flow battery application.     

Proton Transport from Dendritic Helical‐Pore‐Incorporated Polymersomes

The ability to add synthetic channels to polymersome (polymer vesicle) membranes could lead to novel membrane composites with unique selectivity and permeability. Proton transport through two different synthetic pores, self‐assembled from either a dendritic dipeptide, (6Nf‐3,4‐3,5)12G2‐CH₂‐Boc‐L‐Tyr‐L‐Ala‐OMe, or a dendritic ester, (R)‐4Bp‐3,4‐dm8G1‐COOMe, incorporated into polymersome membranes are studied. Polymersomes provide an excellent platform for studying such transport processes due to their robustness and mechanical and chemical stability compared to liposomes. It is found that the incorporated dendritic dipeptide and dendritic ester assemble into stable helical pores in the poly(ethylene oxide)‐polybutadiene (PEO‐PBD) polymersomes but not in the poly(2‐methyloxazoline)‐poly(dimethylsiloxane)‐poly(2‐methyl oxazoline) (PMOX‐PDMS‐PMOX) polymersomes. The incorporation is confirmed by circular dichroism (CD), changes in purely synthetic mechanical strength (e.g., areal expansion modulus) as assessed by micropipette aspiration, and cryo‐TEM. In addition to the structural analyses, a transport measurement shows the incorporated dendritic helical pores allow facile transport of protons across the polymersome membranes after up to one month of storage. This integration of synthetic porous channels with polymersome substrates could provide a valuable tool for studying active transport processes in a composite membrane. These composites will ultimately expand the family of biologically inspired porous‐membrane mimics.     

Proton Conducting Phase‐Separated Multiblock Copolymers with Sulfonated Poly(phenylene sulfone) Blocks for Electrochemical Applications: Preparation,Morphology, Hydration Behavior,and Transport

A family of multiblock copolymers consisting of alternating fully sulfonated hydrophilic poly(phenylene sulfone) and hydrophobic poly(phenylene ether sulfone) segments are prepared and characterized. The multiblock copolymers are formed by the coupling of preformed hydrophilic and hydrophobic blocks using a specially designed coupling agent. The block lengths (degree of polymerization) of both segment types were varied in order to control the ion exchange capacity. Solution cast films show spontaneous nanophase separation leading to distinct bicontinuous morphologies with correlation lengths around 15 nm. The hydrophobic phase gives the membranes their advantageous viscoelastic properties even at high temperatures under both wet and dry conditions, while proton conductivity takes place within the hydrophilic phase. Since the properties of fully sulfonated poly (phenylene sulfone)s are locally preserved within the hydrophilic domain, the membranes show very high proton conductivity and high hydrolytic stability. The very high degree of water dispersion within the hydrophilic domains leads to very low electro‐osmotic water drag. Because of their superior transport and stability properties these multiblock copolymers have a great potential for use as a substitute for perfluorosulfonic acid membranes which are used as separator materials in electrochemical applications such as polymer electrolyte membrane (PEM) fuel cells and redox flow batteries.     

Clay Nanosheets in Skeletons of Controlled Phase Inversion Separators for Thermally Stable Li‐Ion Batteries

Phase inversion is a powerful alternative process for preparing ultra‐thin separators for various secondary batteries. Unfortunately, separators prepared from phase inversion generally suffer from uneven pore size and pore size distribution, which frequently results in poor battery performance. Here, a straightforward route is demonstrated to solve the drawbacks of phase‐inversion‐based separators for Li‐ion batteries by means of directly incorporating 2D clay sheets in the skeleton of poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVdF‐HFP) with multiscale pore generation from a simple one‐step solution coating method. Additionally generated pores by the inclusion of 2D nanosheets in PVdF‐HFP skeletons, combined with the multiscale pores (several micrometers + sub‐micrometers) originally generated by means of the controlled phase inversion, can generate additional ionic transport pathways, leading to Li‐ion battery performances better than those of commercialized polyethylene separators. Moreover, the addition of extremely low contents of 2D clay sheets in PVdF‐HFP separators allows thermally stable polymer separators to be realized.     

Sub-2-nm Channels within Covalent Triazine Framework Enable Fast Proton-Selective Transport in Flow Battery Membrane

Ion conductive membranes (ICMs) with robust sub-2-nm channels show high proton transport rate in flow battery, but it remains a great challenge to precisely control the ion sieving of the membranes. Herein, as a promising proton-selective carrier, sulfonated piperazine covalent triazine framework (s-pCTF) with the channel size of ≈1.5 nm and abundant fast proton hopping sites is introduced into sulfonated poly(ether ether ketone) (SPEEK) to fabricate advanced ICM for vanadium flow battery (VFB) application. The interior protoplasmic channels of s-pCTF demonstrate significant Donnan exclusion effect, resulting in a high proton/vanadium ion selectivity in theory (6.22 × 10⁵). Meanwhile, the nitrogen-rich sub-2-nm channels yield fast proton highway, and exterior-grafted sulfonic acid groups further facilitate the proton transfer. By regulating the ion sieving and proton conductivity, the optimal hybrid membrane exhibits synchronously improved battery performance with an enhanced energy efficiency (92.41% to 78.53% at 40–200 mA cm⁻²) and long-term stability for 900 cycles over 400 h (EE: 87.2–85% at 120 mA cm⁻²), outperforming pure SPEEK and Nafion212 membranes. This study validates the applicability of organic porous CTF with sub-2-nm channels and desired functionality in ICMs for high-performance VFB application.     

Positively K+‐Responsive Membranes with Functional Gates Driven by Host–Guest Molecular Recognition

A novel positively K⁺‐responsive membrane with functional gates driven by host‐guest molecular recognition is prepared by grafting poly(N‐isopropylacrylamide‐co‐acryloylamidobenzo‐15‐crown‐5) (poly(NIPAM‐co‐AAB₁₅C₅)) copolymer chains in the pores of porous nylon‐6 membranes with a two‐step method combining plasma‐induced pore‐filling grafting polymerization and chemical modification. Due to the cooperative interaction of host‐guest complexation and phase transition of the poly(NIPAM‐co‐AAB₁₅C₅), the grafted gates in the membrane pores could spontaneously switch from “closed” state to “open” state by recognizing K⁺ ions in the environment and vice versa; while other ions (e.g., Na⁺, Ca²⁺ or Mg²⁺) can not trigger such an ion‐responsive switching function. The positively K⁺‐responsive gating action of the membrane is rapid, reversible, and reproducible. The proposed K⁺‐responsive gating membrane provide a new mode of behavior for ion‐recognizable “smart” or “intelligent” membrane actuators, which is highly attractive for controlled release, chemical/biomedical separations, tissue engineering, sensors, etc.     

A Novel Ultra‐hydrophobic Surface: Statically Non‐wetting but Dynamically Non‐sliding

In this study, we report the fabrication of a novel surface with both morphology and composition heterogeneities by casting polymer blend solution. The resultant poly (methyl methacrylate) (PMMA) and amphiphilic polyurethane (A‐PU) surface has a rough structure on microscale and separated hydrophobic and hydrophilic nanodomains as well. On this surface, water drop shows a static CA about 160° but the drop is pinned on the surface at any titled angles. This phenomenon can be ascribed to the special surface characters as the air trapped in the porous surface and hydrophobic domains repel the water, leading to a very high static CA, whereas the hydrophilic domains contacting with water at the interface, though being restrained to a little fraction by the surface roughness, adhere the drop. In addition, by adding the third component, hydrophobic fluorinated polyurethane, in the blend, the formed PMMA/A‐PU/F‐PU blend surfaces show CA about 160° but the SA be able to rationally tune from small to large by adjusting the ratio of A‐PU to F‐PU. Our method provides a novel approach for controlling surface morphology, composition and corresponding surface adhesion, and may find many applications in various fields.     

Advanced Charged Sponge‐Like Membrane with Ultrahigh Stability and Selectivity for Vanadium Flow Batteries

Advanced charged sponge‐like porous membranes with ultrahigh stability and selectivity are designed and fabricated for vanadium flow battery (VFB) applications. The designed porous membranes are fabricated via constructing positively charged cross‐linked networks on the pore walls of polysulfone membranes. The charge density of the pore walls can be tuned by changing the crosslinking time. The positively charged pore walls can effectively retain vanadium ions via Donnan exclusion, hence keeping extremely high selectivity, while the crosslinked network effectively increases the membrane stability. As a result, the designed membranes exhibit an outstanding performance, combining extremely high selectivity and stability. The single cell assembled with the prepared porous membrane shows a columbic efficiency of 99% and an energy efficiency of 86% at a current density of 80 mA cm^?2, which is much higher than Nafion 115 (93.5%; 82.3%). A battery assembled with the prepared membrane shows a stable battery performance over more than 6000 cycles, which is by far the longest record for porous membranes ever reported. These results indicate that advanced, charged, sponge‐like, porous membranes with a crosslinked pore‐wall structure are highly promising for VFB applications.     

Ultrathin,Organic, Semiconductor/Polymer Blends by Scanning Corona‐Discharge Coating for High‐Performance Organic Thin‐Film Transistors

A new thin‐film coating process, scanning corona‐discharge coating (SCDC), to fabricate ultrathin tri‐isopropylsilylethynyl pentacene (TIPS‐PEN)/amorphous‐polymer blend layers suitable for high‐performance, bottom‐gate, organic thin‐film transistors (OTFTs) is described. The method is based on utilizing the electrodynamic flow of gas molecules that are corona‐discharged at a sharp metallic tip under a high voltage and subsequently directed towards a bottom electrode. With the static movement of the bottom electrode, on which a blend solution of TIPS‐PEN and an amorphous polymer is deposited, SCDC provides an efficient route to produce uniform blend films with thicknesses of less than one hundred nanometers, in which the TIPS‐PEN and the amorphous polymer are vertically phase‐separated into a bilayered structure with a single‐crystalline nature of the TIPS‐PEN. A bottom‐gate field‐effect transistor with a blend layer of TIPS‐PEN/polystyrene (PS) (90/10 wt%) operated at ambient conditions, for example, indeed exhibits a highly reliable device performance with a field‐effect mobility of approximately 0.23 cm² V^?1 s^?1: two orders of magnitude greater than that of a spin‐coated blend film. SCDC also turns out to be applicable to other amorphous polymers, such as poly(α‐methyl styrene) and poly(methyl methacrylate) and, readily combined with the conventional transfer‐printing technique, gives rise to micropatterned arrays of TIPS‐PEN/polymer films.     

Surface‐Directed Phase Separation of Conjugated Polymer Blends for Efficient Light‐Emitting Diodes

The ability to control organic‐organic interfaces in conjugated polymer blends is critical for further device improvement. Here, we control the phase separation in blends of poly(9,9‐di‐n‐octylfluorene‐alt‐benzothiadiazole) (F8BT) and poly(9,9‐di‐n‐octylfluorene‐alt‐(1,4‐phenylene‐((4‐sec‐butylphenyl)imino)‐1,4‐phenylene) (TFB) via chemical modification of the substrate by microcontact printing of octenyltrichlorosilane molecules. The lateral phase‐separated structures in the blend film closely replicate the underlying micrometer‐scale chemical pattern. We found nanometer‐scale vertical segregation of the polymers within both lateral domains, with regions closer to the substrate being substantially pure phases of either polymer. Such phase separation has important implications for the performance of light‐emitting diodes fabricated using these patterned blend films. In the absence of a continuous TFB wetting layer at the substrate interface, as typically formed in spin‐coated blend films, charge carrier injection is confined in the well‐defined TFB‐rich domains. This confinement leads to high electroluminescence efficiency, whereas the overall reduction in the roughness of the patterned blend film results in slower decay of device efficiency at high voltages. In addition, the amount of surface out‐coupling of light in the forward direction observed in these blend devices is found to be strongly correlated to the distribution of periodicity of the phase‐separated structures in the active layer.     

The Influence of the Solvent Evaporation Rate on the Phase Separation and Electrical Performances of Soluble Acene‐Polymer Blend Semiconductors

The phase‐separation characteristics of spin‐cast difluorinated‐triethylsilylethynyl anthradithiophene (F‐TESADT)/poly(methyl methacrylate) (PMMA) blends are investigated with the aim of fabricating transistors with a high field‐effect mobility and stability. It is found that the presence of PMMA in the F‐TESADT/PMMA blends prevents dewetting of F‐TESADT from the substrate and provides a platform for F‐TESADT molecules to segregate and crystallize at the air–film interface. By controlling the solvent evaporation rate of the spin‐cast blend solution, it is possible to regulate the phase separation of the two components, which in turn determines the structural development of the F‐TESADT crystals on PMMA. At a low solvent evaporation rate, a bilayer structure consisting of highly ordered F‐TESAT crystals on the top and low‐trap PMMA dielectric on the bottom can be fabricated by a one‐step spin‐casting process. The use of F‐TESADT/PMMA blend films in bottom gate transistors produces much higher field‐effect mobilities and greater stability than homo F‐TESADT films because the phase‐separated interface provides an efficient pathway for charge transport.     

Polymer‐Based Organic Field‐Effect Transistors with Active Layers Aligned by Highly Hydrophobic Nanogrooved Surfaces

In this study, polymer‐based organic field‐effect transistors (OFETs) that exhibit alignment‐induced mobility enhancement, very small device‐to‐device variation, and high operational stability are successfully fabricated by a simple coating method of semiconductor solutions on highly hydrophobic nanogrooved surfaces. The highly hydrophobic nanogrooved surfaces (water contact angle >110°) are effective at inducing unidirectional alignment of polymer backbone structures with edge‐on orientation and are advantageous for realizing high operational stability because of their water‐repellent nature. The dewetting of the semiconductor solution is a critical problem in the thin film formation on highly hydrophobic surfaces. Dewetting during spin coating is suppressed by surrounding the hydrophobic regions with hydrophilic ones under appropriate designs. For the OFET array with an aligned terrace‐phase active layer of poly(2,5‐bis(3‐hexadecylthiophene‐2‐yl)thieno[3,2‐b]thiophene), the hole mobility in the saturation regime of 30 OFETs with channel current direction parallel to the nanogrooves is 0.513 ± 0.018 cm² V^?1 s^?1, which is approximately double that of the OFETs without nanogrooves, and the intrinsic operational stability is comparable to the operational stability of amorphous‐silicon field‐effect transistors. In other words, alignment‐induced mobility enhancement and high operational stability are successfully achieved with very small device‐to‐device variation. This coating method should be a promising means of fabricating high‐performance OFETs.     

Beetle‐Inspired Assembly of Heterostructured Lamellar Membranes with Polymer Cluster–Patterned Surface for Enhanced Molecular Permeation

2D lamellar membranes hold great promise in efficient molecular separations of liquid and gas mixtures. However, the simultaneous realization of high permeation and precise sieving (i.e., overcoming the permeation–rejection tradeoff) of membranes poses a great challenge. Inspired by the structures and functions of the beetle's back, the heterostructured lamellar membranes fabricated through facile and controllable electrostatic atomization method are reported. Particularly, hydrophobic polymer clusters are patterned on hydrophilic laminate (graphene oxide) surfaces to realize the hydrophilic/hydrophobic heterostructure. It shows that the fast dissolution for nonpolar solvents is achieved by the strong affinity polymer clusters, and the ultralow‐barrier diffusion is achieved by the weak affinity laminate channels. Therefore, the permeance is remarkably enhanced (over 7 times for nonpolar solvents), while fully retaining membrane rejection. In contrast, hydrophilic clusters are patterned on hydrophobic laminate (reduced graphene oxide) surfaces and exhibit similar behaviors toward polar solvents. Furthermore, the lamellar membrane displays highly ordered layer‐by‐layer stacking, affording precise molecular rejection. Besides, the lamellar membrane acquires lower thermodynamic energy and hence superior stability under ultrasonic and strong acid or alkali environments, manifesting great potential for long‐term practical operation.     

Lipid‐Containing Polymer Vesicles with pH/Ca2+‐Ion‐Manipulated,Size‐Selective Permeability

Polymeric vesicles attained from the self‐assembly of distearin (a diacylglycerol lipid)‐conjugated poly(acrylic acid) (PAAc) with various distearin contents in the aqueous phase show the capability of control over the vesicular‐wall permeability to hydrophilic solutes of varying sizes by a simple manipulation of the external pH. The pH sensitivity of the vesicle membranes in size‐selective permeability is largely dependent upon the lipid content of copolymer. By the addition of CaCl₂ in aqueous vesicle suspensions, the pH‐evolved assembly structure and the membrane permeability can be immobilized with promoted resistance to further pH alteration, along with an additional counterion screening effect that reduces the pH required for the onset of polar solutes of certain sizes to pass through the membranes. Small‐angle X‐ray scattering (SAXS) measurements of the vesicle structure in the aqueous phase indicate that the pH‐regulated permeability to polar solutes is virtually governed by the extent of hydration and swelling of the vesicle membranes, and the lipid residues within each vesicle wall are packed into the ≈4–5 repeating lamellar islet structure surrounded by PAAc segments.     

Processing and Low Voltage Switching of Organic Ferroelectric Phase‐Separated Bistable Diodes

The processing of solution‐based binary blends of the ferroelectric random copolymer poly(vinylidene fluoride‐trifluoroethylene) P(VDF‐TrFE) and the semiconducting polymer poly(9,9‐dioctylfluorenyl‐2,7‐diyl) (PFO) applied by spin‐coating and wire‐bar coating is investigated. By systematic variation of blend composition, solvent, and deposition temperature it is shown that much smoother blend films can be obtained than reported thus far. At a low PFO:P(VDF‐TrFE) ratio the blend film consists of disk‐shaped PFO domains embedded in a P(VDF‐TrFE) matrix, while an inverted structure is obtained in case the P(VDF‐TrFE) is the minority component. The microstructure of the phase separated blend films is self‐affine. From this observation and from the domain size distribution it is concluded that the phase separation occurs via spinodal decomposition, irrespectively of blend ratio. This is explained by the strong incompatibility of the two polymers expressed by the binary phase diagram, as constructed from thermal analysis data. Time resolved numerical simulation of the microstructure evolution during de‐mixing qualitatively shows how an elevated deposition temperature has a smoothening effect as a result of the reduction of the repulsion between the blend components. The small roughness allowed the realization of bistable rectifying diodes that switch at low voltages with a yield of 100%. This indicates that memory characteristics can be tailored from the outset while processing parameters can be adjusted according to the phase behavior of the active components.     

Ambipolar Charge Transport in Air‐Stable Polymer Blend Thin‐Film Transistors

Ambipolar thin‐film transistors based on a series of air‐stable, solution‐processed blends of an n‐type polymer poly(benzobisimidazobenzophenanthroline) (BBL) and a p‐type small molecule, copper phthalocyanine (CuPc) are demonstrated, where all fabrication and measurements are performed under ambient conditions. The hole mobilities are in the range of 6.0 × 10^–6 to 2.0 × 10^–4 cm² V^–1 s^–1 and electron mobilities are in the range of 2.0 × 10^–6 to 3.0 × 10^–5 cm² V^–1 s^–1, depending on the blend composition. UV‐vis spectroscopy and electron diffraction show crystallization of CuPc in the metastable α‐crystal form within the semicrystalline BBL matrix. These CuPc domains develop into elongated ribbon‐like crystalline nanostructures when the blend films are processed in methanol, but not when they are processed in water. On methylene chloride vapor annealing of the blend films, a phase transformation of CuPc from the α‐form to the β‐form is observed, as shown by optical absorption spectroscopy and electron diffraction. Ambipolar charge transport is only observed in the blend films where CuPc crystallized in the elongated ribbon‐like nanostructures (α‐form). Ambipolar behavior is not observed with CuPc in the β‐polymorph. Unipolar hole mobilities as high as 2.0 × 10^–3 cm² V^–1 s^–1 are observed in these solution‐processed blend field‐effect transistors (FETs) on prolonged treatment in methanol, comparable to previously reported hole mobilities in thermally evaporated CuPc FETs. These results show that ambipolar charge transport and carrier mobilities in multicomponent organic semiconductors are intricately related to the phase‐separated nanoscale and crystalline morphology.     

Multi‐Length Scale Porous Polymers

Thin films with porosities spanning from the nanoscopic to the macroscopic are obtained by combining breath figures (BFs), micrometer‐sized surface cavities arising from the condensation of water on the surface of a film as solvent evaporates rapidly, with the nanoscopic morphology inherent to block copolymers. Using chloroform as a solvent for polystyrene‐b‐poly methyl methacrylate (PS‐b‐PMMA) block copolymers (BCPs), micrometer‐sized pores arise from the formation of the BFs, while nanoscopic pores are generated by the removal of the PMMA by deep UV‐irradiation, which also crosslinks the PS. Solvent retention, though, limits its utility. This is overcome using PS‐b‐poly(n‐butyl methacrylate) dissolved in dichloromethane where, again, multi‐length scales of porosity are achieved by a selective removal of one component of BCPs. Arrays of nanopores on the surface of a film can also be obtained by swelling the hydrophilic component block of PS‐b‐poly(ethyleneoxide) (PEO) with water vapor, under controlled humidity. Simultaneously, large pores can be obtained by macrophase separation between BCPs and water, which leads to multi‐length scale porous films.     

Pseudobilayer Vesicle Formation via Layer‐by‐Layer Assembly of Hydrophobically Modified Polymers on Sacrificial Substrates

A bilayer of a hydrophobically modified polyelectrolyte, octadecyl poly(acrylamide) (PAAm), sandwiched between the layers of a hydrophilic polyelectrolyte, poly(ethyleneimine) (PEI), is prepared by the sequential electrostatic–hydrophobic–electrostatic‐interaction‐driven self‐assembly on planar and colloid substrates. This process results in a PEI/[PAAm]₂/PEI‐multilayer‐coated substrate. The removal of a PAA/PEI/[PAAm]₂/PEI‐multilayer‐coated decomposable colloidal template produces hollow capsules. Irregular hydrophobic domains of the [PAAm]₂ bilayer in the PEI/[PAAm]₂/PEI‐multilayer capsule are infiltrated with a lipid to obtain a uniform, distinct hydrophobic layer, imparting the capsule with a pseudobilayer vesicle structure.     

High‐Yield Fabrication,Activation, and Characterization of Carbon Nanotube Ion Channels by Repeated Voltage‐Ramping of Membrane‐Capillary Assembly

The interior channels of carbon nanotubes are promising for studying transport of individual molecules in a 1D confined space. However, experimental investigations of the interior transport have been limited by the extremely low yields of fabricated nanochannels and their characterization. Here, this challenge is addressed by assembling nanotube membranes on glass capillaries and employing a voltage‐ramping protocol. Centimeter‐long carbon nanotubes embedded in an epoxy matrix are sliced to hundreds of 10 µm‐thick membranes containing essentially identical nanotubes. The membrane is attached to glass capillaries and dipped into analyte solution. Repeated ramping of the transmembrane voltage gradually increases ion conductance and activates the nanotube ion channels in 90% of the membranes; 33% of the activated membranes exhibit stochastic pore‐blocking events caused by cation translocation through the interiors of the nanotubes. Since the membrane‐capillary assembly can be handled independently of the analyte solution, fluidic exchange can be carried out simply by dipping the capillary into a solution of another analyte. This capability is demonstrated by sequentially measuring the threshold transmembrane voltages and ion mobilities for K⁺, Na⁺, and Li⁺. This approach, validated with carbon nanotubes, will save significant time and effort when preparing and testing a broad range of solid‐state nanopores.