Facile Synthesis of Hematite Quantum‐Dot/Functionalized Graphene‐Sheet Composites as Advanced Anode Materials for Asymmetric Supercapacitors

For building high‐energy density asymmetric supercapacitors, developing anode materials with large specific capacitance remains a great challenge. Although Fe₂O₃ has been considered as a promising anode material for asymmetric supercapacitors, the specific capacitance of the Fe₂O₃‐based anodes is still low and cannot match that of cathodes in the full cells. In this work, a composite material with well dispersed Fe₂O₃ quantum dots (QDs, ≈2 nm) decorated on functionalized graphene‐sheets (FGS) is prepared by a facile and scalable method. The Fe₂O₃ QDs/FGS composites exhibit a large specific capacitance up to 347 F g^?1 in 1 m Na₂SO₄ between –1 and 0 V versus Ag/AgCl. An asymmetric supercapacitor operating at 2 V is fabricated using Fe₂O₃/FGS as anode and MnO₂/FGS as cathode in 1 m Na₂SO₄ aqueous electrolyte. The Fe₂O₃/FGS//MnO₂/FGS asymmetric supercapacitor shows a high energy density of 50.7 Wh kg^?1 at a power density of 100 W kg^?1 as well as excellent cycling stability and power capability. The facile synthesis method and superior supercapacitive performance of the Fe₂O₃ QDs/FGS composites make them promising as anode materials for high‐performance asymmetric supercapacitors.     

High‐Performance Supercapacitor Applications of NiO‐Nanoparticle‐Decorated Millimeter‐Long Vertically Aligned Carbon Nanotube Arrays via an Effective Supercritical CO2‐Assisted Method

Nickel oxide (NiO) nanoparticles are distributed uniformly in the vertically aligned carbon nanotube arrays (VACNTs) with millimeter thickness by an effective supercritical carbon dioxide‐assisted method. The as‐prepared VACNT/NiO hybrid structures are used as electrodes without binders and conducting additives for supercapacitor applications. Due to the synergetic effects of NiO and VACNTs with nanoporous structures and parallel 1D conductive paths for electrons, the supercapacitors exhibit a high capacitance of 1088.44 F g^?1. Furthermore, an asymmetric supercapacitor is assembled using the as‐synthesized VACNTs/NiO hybrids as the positive electrode and the VACNTs as the negative electrode. Remarkably, the energy density of the asymmetric supercapacitor is as high as 90.9 Wh kg^?1 at 3.2 kW kg^?1 and the maximum power density reaches 25.6 kW kg^?1 at 24.9 Wh kg^?1, which are superior to those of the NiO or VACNTs‐based asymmetric supercapacitors. More importantly, the asymmetric supercapacitors exhibit capacitance retention of 87.1% after 2000 cycles at 5 A g^?1. The work provides a novel approach in decorating highly dense and long VACNTs with active materials, which are promising electrodes for supercapacitors with ultrahigh power density and energy density.     

Flexible Sodium‐Ion Pseudocapacitors Based on 3D Na2Ti3O7 Nanosheet Arrays/Carbon Textiles Anodes

Flexible energy storage devices are critical components for emerging flexible and wearable electronics. Improving the electrochemical performance of flexible energy storage devices depends largely on development of novel electrode architectures and new systems. Here, a new class of flexible energy storage device called flexible sodium‐ion pseudocapacitors is developed based on 3D‐flexible Na₂Ti₃O₇ nanosheet arrays/carbon textiles (NTO/CT) as anode and flexible reduced graphene oxide film (GFs) as cathode without metal current collectors or conducting additives. The NTO/CT anode with advanced electrode architectures is fabricated by directly growing Na₂Ti₃O₇ nanosheet arrays on carbon textiles with robust adhesion through a simple hydrothermal process. The flexible GF//NTO/CT configuration achieves a high energy density of 55 Wh kg^?1 and high power density of 3000 W kg^?1. Taking the fully packaged flexible sodium‐ion pseudocapacitors into consideration, the maximum practical volumetric energy density and power density reach up to 1.3 mWh cm^?3 and 70 mW cm^?3, respectively. In addition, the flexible GF//NTO/CT device demonstrates a stable electrochemical performances with almost 100% capacitance retention under harsh mechanical deformation.     

In‐Plane Assembled Orthorhombic Nb2O5 Nanorod Films with High‐Rate Li+ Intercalation for High‐Performance Flexible Li‐Ion Capacitors

Organic hybrid supercapacitors that consist of a battery electrode and a capacitive electrode show greatly improved energy density, but their power density is generally limited by the poor rate capability of battery‐type electrodes. In addition, flexible organic hybrid supercapacitors are rarely reported. To address the above issues, herein an in‐plane assembled orthorhombic Nb₂O₅ nanorod film anode with high‐rate Li⁺ intercalation to develop a flexible Li‐ion hybrid capacitor (LIC) is reported. The binder‐/additive‐free film exhibits excellent rate capability (≈73% capacity retention with the rate increased from 0.5 to 20 C) and good cycling stability (>2500 times). Kinetic analyses reveal that the high rate performance is mainly attributed to the excellent in‐plane assembly of interconnected single‐crystalline Nb₂O₅ nanorods on the current collector, ensuring fast electron transport, facile Li‐ion migration in the porous film, and greatly reduced ion‐diffusion length. Using such a Nb₂O₅ film as anode and commercial activated carbon as cathode, a flexible LIC is designed. It delivers both high gravimetric and high volumetric energy/power densities (≈95.55 Wh kg^?1/5350.9 W kg^?1; 6.7 mW h cm^?3/374.63 mW cm^?3), surpassing previous typical Li‐intercalation electrode‐based LICs. Furthermore, this LIC device still keeps good electrochemical attributes even under serious bending states (30°–180°).     

Fast and Large Lithium Storage in 3D Porous VN Nanowires–Graphene Composite as a Superior Anode Toward High‐Performance Hybrid Supercapacitors

Li‐ion hybrid capacitors (LIHCs), consisting of an energy‐type redox anode and a power‐type double‐layer cathode, are attracting significant attention due to the good combination with the advantages of conventional Li‐ion batteries and supercapacitors. However, most anodes are battery‐like materials with the sluggish kinetics of Li‐ion storage, which seriously restrict the energy storage of LIHCs at the high charge/discharge rates. Herein, vanadium nitride (VN) nanowire is demonstated to have obvious pseudocapacitive characteristic of Li‐ion storage and can get further gains in energy storage through a 3D porous architecture with the assistance of conductive reduced graphene oxide (RGO). The as‐prepared 3D VN–RGO composite exhibits the large Li‐ion storage capacity and fast charge/discharge rate within a wide working widow from 0.01–3 V (vs Li/Li⁺), which could potentially boost the operating potential and the energy and power densities of LIHCs. By employing such 3D VN–RGO composite and porous carbon nanorods with a high surface area of 3343 m² g^?1 as the anode and cathode, respectively, a novel LIHCs is fabricated with an ultrahigh energy density of 162 Wh kg^?1 at 200 W kg^?1, which also remains 64 Wh kg^?1 even at a high power density of 10 kW kg^?1.     

Three‐Dimensional Co3O4@MnO2 Hierarchical Nanoneedle Arrays: Morphology Control and Electrochemical Energy Storage

In this paper, a highly ordered three‐dimensional Co₃O₄@MnO₂ hierarchical porous nanoneedle array on nickel foam is fabricated by a facile, stepwise hydrothermal approach. The morphologies evolution of Co₃O₄ and Co₃O₄@MnO₂ nanostructures upon reaction times and growth temperature are investigated in detail. Moreover, the as‐prepared Co₃O₄@MnO₂ hierarchical structures are investigated as anodes for both supercapacitors and Li‐ion batteries. When used for supercapacitors, excellent electrochemical performances such as high specific capacitances of 932.8 F g^?1 at a scan rate of 10 mV s^?1 and 1693.2 F g^?1 at a current density of 1 A g^?1 as well as long‐term cycling stability and high energy density (66.2 W h kg^?1 at a power density of 0.25 kW kg^?1), which are better than that of the individual component of Co₃O₄ nanoneedles and MnO₂ nanosheets, are obtained. The Co₃O₄@MnO₂ NAs are also tested as anode material for LIBs for the first time, which presents an improved performance with high reversible capacity of 1060 mA h g^?1 at a rate of 120 mA g^?1, good cycling stability, and rate capability.     

A Simple Electrode‐Level Chemical Presodiation Route by Solution Spraying to Improve the Energy Density of Sodium‐Ion Batteries

The formation of a solid electrolyte interface (SEI) on the surface of a carbon anode consumes the active sodium ions from the cathode and reduces the energy density of sodium‐ion batteries (SIBs). Herein, a simple electrode‐level presodiation strategy by spraying a sodium naphthaline (Naph‐Na) solution onto a carbon electrode is reported, which compensates the initial sodium loss and improves the energy density of SIBs. After presodiation, an SEI layer is preformed on the surface of carbon anode before battery cycling. It is shown that a large irreversible capacity of 60 mAh g^?1 is replenished and 20% increase of the first‐cycle Coulombic efficiency is achieved for a hard carbon anode using this presodiation strategy, and the energy density of a Na_0.9[Cu_0.22Fe_0.30Mn_0.48]O₂||carbon full cell is increased from 141 to 240 Wh kg^?1 by using the presodiated carbon anode. This simple and scalable electrode‐level chemical presodiation route also shows generality and value for the presodiation of other anodes in SIBs.     

Understanding Origin of Voltage Hysteresis in Conversion Reaction for Na Rechargeable Batteries: The Case of Cobalt Oxides

Conversion reaction electrodes offer a high specific capacity in rechargeable batteries by utilizing wider valence states of transition metals than conventional intercalation‐based electrodes and have thus been intensively studied in recent years as potential electrode materials for high‐energy‐density rechargeable batteries. However, several issues related to conversion reactions remain poorly understood, including the polarization or hysteresis during charge/discharge processes. Herein, Co₃O₄ in Na cells is taken as an example to understand the aforementioned properties. The large hysteresis in charge/discharge profiles is revealed to be due to different electrochemical reaction paths associated with respective charge and discharge processes, which is attributed to the mobility gap among inter‐diffusing species in a metal oxide compound during de/sodiation. Furthermore, a Co₃O₄–graphene nanoplatelet hybrid material is demonstrated to be a promising anode for Na rechargeable batteries, delivering a capacity of 756 mAh g^?1 with a good reversibility and an energy density of 96 Wh kg^?1 (based on the total electrode weight) when combined with a recently reported Na₄Fe₃(PO₄)₂(P₂O₇) cathode.     

Dual‐Salt Mg‐Based Batteries with Conversion Cathodes

Mg batteries as the most typical multivalent batteries are attracting increasing attention because of resource abundance, high volumetric energy density, and smooth plating/stripping of Mg anodes. However, current limitations for the progress of Mg batteries come from the lack of high voltage electrolytes and fast Mg‐insertable structure prototypes. In order to improve their energy or power density, hybrid systems combining Li‐driven cathode reaction with Mg anode process appear to be a potential solution by bypassing the aforementioned limitations. Here, FeS _x (x = 1 or 2) is employed as conversion cathode with 2–4 electron transfers to achieve a maximum energy density close to 400 Wh kg^?1, which is comparable with that of Li‐ion batteries but without serious dendrite growth and polysulphide dissolution. In situ formation of solid electrolyte interfaces on both sulfide and Mg electrodes is likely responsible for long‐life cycling and suppression of S‐species passivation at Mg anodes. Without any decoration on the cathode, electrolyte additive, or anode protection, a reversible capacity of more than 200 mAh g^?1 is still preserved for Mg/FeS₂ after 200 cycles.     

Hierarchical Engineering of Porous P2‐Na2/3Ni1/3Mn2/3O2 Nanofibers Assembled by Nanoparticles Enables Superior Sodium‐Ion Storage Cathodes

Layered transition metal oxides (TMOs) are appealing cathode candidates for sodium‐ion batteries (SIBs) by virtue of their facile 2D Na⁺ diffusion paths and high theoretical capacities but suffer from poor cycling stability. Herein, taking P2‐type Na_2/3Ni_1/3Mn_2/3O₂ as an example, it is demonstrated that the hierarchical engineering of porous nanofibers assembled by nanoparticles can effectively boost the reaction kinetics and stabilize the structure. The P2‐Na_2/3Ni_1/3Mn_2/3O₂ nanofibers exhibit exceptional rate capability (166.7 mA h g^?1 at 0.1 C with 73.4 mA h g^?1 at 20 C) and significantly improved cycle life (≈81% capacity retention after 500 cycles) as cathode materials for SIBs. The highly reversible structure evolution and Ni/Mn valence change during sodium insertion/extraction are verified by in operando X‐ray diffraction and ex situ X‐ray photoelectron spectroscopy, respectively. The facilitated electrode process kinetics are demonstrated by an additional study using the electrochemical measurements and density functional theory computations. More impressively, the prototype Na‐ion full battery built with a Na_2/3Ni_1/3Mn_2/3O₂ nanofibers cathode and hard carbon anode delivers a promising energy density of 212.5 Wh kg^?1. The concept of designing a fibrous framework composed of small nanograins offers a new and generally applicable strategy for enhancing the Na‐storage performance of layered TMO cathode materials.     

A High Energy Density Asymmetric Supercapacitor from Nano‐architectured Ni(OH)2/Carbon Nanotube Electrodes

The demand for advanced energy storage devices such as supercapacitors and lithium‐ion batteries has been increasing to meet the application requirements of hybrid vehicles and renewable energy systems. A major limitation of state‐of‐art supercapacitors lies in their relatively low energy density compared with lithium batteries although they have superior power density and cycle life. Here, we report an additive‐free, nano‐architectured nickel hydroxide/carbon nanotube (Ni(OH)₂/CNT) electrode for high energy density supercapacitors prepared by a facile two‐step fabrication method. This Ni(OH)₂/CNT electrode consists of a thick layer of conformable Ni(OH)₂ nano‐flakes on CNT bundles directly grown on Ni foams (NFs) with a very high areal mass loading of 4.85 mg cm^?2 for Ni(OH)₂. Our Ni(OH)₂/CNT/NF electrode demonstrates the highest specific capacitance of 3300 F g^?1 and highest areal capacitance of 16 F cm^?2, to the best of our knowledge. An asymmetric supercapacitor using the Ni(OH)₂/CNT/NF electrode as the anode assembled with an activated carbon (AC) cathode can achieve a high cell voltage of 1.8 V and an energy density up to 50.6 Wh/kg, over 10 times higher than that of traditional electrochemical double‐layer capacitors (EDLCs).     

Molecular Design of Mesoporous NiCo2O4 and NiCo2S4 with Sub‐Micrometer‐Polyhedron Architectures for Efficient Pseudocapacitive Energy Storage

Spinel‐type NiCo₂O₄ (NCO) and NiCo₂S₄ (NCS) polyhedron architectures with sizes of 500–600 nm and rich mesopores with diameters of 1–2 nm are prepared facilely by the molecular design of Ni and Co into polyhedron‐shaped zeolitic imidazolate frameworks as solid precursors. Both as‐prepared NCO and NCS nanostructures exhibit excellent pseudocapacitance and stability as electrodes in supercapacitors. In particular, the exchange of O^2? in the lattice of NCO with S^2? obviously improves the electrochemical performance. NCS shows a highly attractive capacitance of 1296 F g^?1 at a current density of 1 A g^?1, ultrahigh rate capability with 93.2% capacitance retention at 10 A g^?1, and excellent cycling stability with a capacitance retention of 94.5% after cycling at 1 A g^?1 for 6000 times. The asymmetric supercapacitor with an NCS negative electrode and an active carbon positive electrode delivers a very attractive energy density of 44.8 Wh kg^?1 at power density 794.5 W kg^?1, and a favorable energy density of 37.7 Wh kg^?1 is still achieved at a high power density of 7981.1 W kg^?1. The specific mesoporous polyhedron architecture contributes significantly to the outstanding electrochemical performances of both NCO and NCS for capacitive energy storage.     

Overcoming the Unfavorable Kinetics of Na3V2(PO4)2F3//SnPx Full‐Cell Sodium‐Ion Batteries for High Specific Energy and Energy Efficiency

In this work, a full‐cell sodium‐ion battery (SIB) with a high specific energy approaching 300 Wh kg^?1 is realized using a sodium vanadium fluorophosphate (Na₃V₂(PO₄)₂F₃, NVPF) cathode and a tin phosphide (SnP_x) anode, despite both electrode materials having greatly unbalanced specific capacities. The use of a cathode employing an areal loading more than eight times larger than that of the anode can be achieved by designing a nanostructured nanosized NVPF (n‐NVPF) cathode with well‐defined particle size, porosity, and conductivity. Furthermore, the high rate capability and high potential window of the full‐cell can be obtained by tuning the Sn/P ratio (4/3, 1/1, and 1/2) and the nanostructure of an SnP_x/carbon composite anode. As a result, the full‐cell SIBs employing the nanostructured n‐NVPF cathode and the SnP_x/carbon composite anode (Sn/P = 1/1) exhibit outstanding specific energy (≈280 Wh kg^?1_{(cathode+anode)}) and energy efficiency (≈78%); furthermore, the results are comparable to those of state‐of‐the‐art lithium‐ion batteries.     

A High‐Energy Li‐Ion Battery Using a Silicon‐Based Anode and a Nano‐Structured Layered Composite Cathode

High capacity electrodes based on a Si composite anode and a layered composite oxide cathode, Ni‐rich Li[Ni_0.75Co_0.1Mn_0.15]O₂, are evaluated and combined to fabricate a high energy lithium ion battery. The Si composite anode, Si/C‐IWGS (internally wired with graphene sheets), is prepared by a scalable sol–gel process. The Si/C‐IWGS anode delivers a high capacity of >800 mAh g^?1 with an excellent cycling stability of up to 200 cycles, mainly due to the small amount of graphene (～6 wt%). The cathode (Li[Ni_0.75Co_0.1Mn_0.15]O₂) is structurally optimized (Ni‐rich core and a Ni‐depleted shell with a continuous concentration gradient between the core and shell, i.e., a full concentration gradient, FCG, cathode) so as to deliver a high capacity (>200 mAh g^?1) with excellent stability at high voltage (～4.3 V). A novel lithium ion battery system based on the Si/C‐IWGS anode and FCG cathode successfully demonstrates a high energy density (240 Wh kg^?1 at least) as well as an unprecedented excellent cycling stability of up to 750 cycles between 2.7 and 4.2 V at 1C. As a result, the novel battery system is an attractive candidate for energy storage applications demanding a high energy density and long cycle life.     

A Low‐Cost,Self‐Standing NiCo2O4@CNT/CNT Multilayer Electrode for Flexible Asymmetric Solid‐State Supercapacitors

The demand for a new generation of flexible, portable, and high‐capacity power sources increases rapidly with the development of advanced wearable electronic devices. Here we report a simple process for large‐scale fabrication of self‐standing composite film electrodes composed of NiCo₂O₄@carbon nanotube (CNT) for supercapacitors. Among all composite electrodes prepared, the one fired in air displays the best electrochemical behavior, achieving a specific capacitance of 1,590 F g^?1 at 0.5 A g^?1 while maintaining excellent stability. The NiCo₂O₄@CNT/CNT film electrodes are fabricated via stacking NiCo₂O₄@CNT and CNT alternately through vacuum filtration. Lightweight, flexible, and self‐standing film electrodes (≈24.3 µm thick) exhibit high volumetric capacitance of 873 F cm^?3 (with an areal mass of 2.5 mg cm^?2) at 0.5 A g^?1. An all‐solid‐state asymmetric supercapacitor consists of a composite film electrode and a treated carbon cloth electrode has not only high energy density (≈27.6 Wh kg^?1) at 0.55 kW kg^?1 (including the weight of the two electrodes) but also excellent cycling stability (retaining ≈95% of the initial capacitance after 5000 cycles), demonstrating the potential for practical application in wearable devices.     

A High‐Energy Lithium‐Ion Capacitor by Integration of a 3D Interconnected Titanium Carbide Nanoparticle Chain Anode with a Pyridine‐Derived Porous Nitrogen‐Doped Carbon Cathode

Lithium‐ion capacitors (LICs) are hybrid energy storage devices that have the potential to bridge the gap between conventional high‐energy lithium‐ion batteries and high‐power capacitors by combining their complementary features. The challenge for LICs has been to improve the energy storage at high charge?discharge rates by circumventing the discrepancy in kinetics between the intercalation anode and capacitive cathode. In this article, the rational design of new nanostructured LIC electrodes that both exhibit a dominating capacitive mechanism (both double layer and pseudocapacitive) with a diminished intercalation process, is reported. Specifically, the electrodes are a 3D interconnected TiC nanoparticle chain anode, synthesized by carbothermal conversion of graphene/TiO₂ hybrid aerogels, and a pyridine‐derived hierarchical porous nitrogen‐doped carbon (PHPNC) cathode. Electrochemical properties of both electrodes are thoroughly characterized which demonstrate their outstanding high‐rate capabilities. The fully assembled PHPNC//TiC LIC device delivers an energy density of 101.5 Wh kg^?1 and a power density of 67.5 kW kg^?1 (achieved at 23.4 Wh kg^?1), and a reasonably good cycle stability (≈82% retention after 5000 cycles) within the voltage range of 0.0?4.5 V.     

Fabrication and Shell Optimization of Synergistic TiO2‐MoO3 Core–Shell Nanowire Array Anode for High Energy and Power Density Lithium‐Ion Batteries

A novel synergistic TiO₂‐MoO₃ (TO‐MO) core–shell nanowire array anode has been fabricated via a facile hydrothermal method followed by a subsequent controllable electrodeposition process. The nano‐MoO₃ shell provides large specific capacity as well as good electrical conductivity for fast charge transfer, while the highly electrochemically stable TiO₂ nanowire core (negligible volume change during Li insertion/desertion) remedies the cycling instability of MoO₃ shell and its array further provides a 3D scaffold for large amount electrodeposition of MoO₃. In combination of the unique electrochemical attributes of nanostructure arrays, the optimized TO‐MO hybrid anode (mass ratio: ca. 1:1) simultaneously exhibits high gravimetric capacity (ca. 670 mAh g^?1; approaching the hybrid's theoretical value), excellent cyclability (>200 cycles) and good rate capability (up to 2000 mA g^?1). The areal capacity is also as high as 3.986 mAh cm^?2, comparable to that of typical commercial LIBs. Furthermore, the hybrid anode was assembled for the first time with commercial LiCoO₂ cathode into a Li ion full cell, which shows outstanding performance with maximum power density of 1086 W kg_total ^?1 (based on the total mass of the TO‐MO and LiCoO₂) and excellent energy density (285 Wh kg_total ^?1) that is higher than many previously reported metal oxide anode‐based Li full cells.     

Kinetics Enhanced Nitrogen‐Doped Hierarchical Porous Hollow Carbon Spheres Boosting Advanced Potassium‐Ion Hybrid Capacitors

Potassium‐ion hybrid capacitors (PIHCs) shrewdly combine a battery‐type anode and a capacitor‐type cathode, exhibiting an energy density close to that of potassium ion batteries and a comparable power density of supercapacitors. However, the rosy scenario is compromised by the sluggish kinetics in the PIHCs device. Herein, the kinetics enhanced nitrogen‐doped hierarchical porous hollow carbon spheres (NHCS) are synthesized and successfully applied to PIHCs. As for the K half‐cell, NHCS anchored with sodium alginate delivers excellent electrochemical performance. Further evaluation shows that the binder can significantly affect the potassium storage performance of NHCS by adjusting the coatability and ionic conductivity of the NHCS anode. Moreover, kinetic analysis and density functional theory calculations reveal the origin of the superior electrochemical properties of NHCS. As expected, an advanced PIHC device is assembled with a NHCS anode and an activated NHCS cathode, demonstrating an exceptionally high energy/power density (114.2 Wh kg^?1 and 8203 W kg^?1), along with a long‐life capability. The successful construction of high‐performance PIHCs in this work opens a new avenue for the development and application of PIHCs in the future.     

Stabilizing Solid Electrolyte Interphases on Both Anode and Cathode for High Areal Capacity,High‐Voltage Lithium Metal Batteries with High Li Utilization and Lean Electrolyte

High‐energy‐density lithium metal batteries are considered the most promising candidates for the next‐generation energy storage systems. However, conventional electrolytes used in lithium‐ion batteries can hardly meet the demand of the lithium metal batteries due to their intrinsic instability for Li metal anodes and high‐voltage cathodes. Herein, an ester‐based electrolyte with tris(trimethylsilyl)phosphate additive that can form stable solid electrolyte interphases on the anode and cathode is reported. The additive decomposes before the ester solvent and enables the formation of P‐ and Si‐rich interphases on both electrodes that are ion conductive and robust. Thus, lithium metal batteries with a high‐specific‐energy of 373 Wh kg^?1 can exhibit a long lifespan of over 80 cycles under practical conditions, including a low negative/positive capacity ratio of 2.3, high areal capacity of 4.5 mAh cm^?2 for cathode, high‐voltage of 4.5 V, and lean electrolyte of 2.8 µL mAh^?1. A 4.5 V pouch cell is further assembled to demonstrate the practical application of the tris(trimethylsilyl)phosphate additive with an areal capacity of 10.2 and 9.4 mAh cm^?2 for the anode and cathode, respectively. This work is expected to provide an effective electrolyte optimizing strategy compatible with current lithium ion battery manufacturing systems and pave the way for the next‐generation Li metal batteries with high specific energy and energy density.     

Engineering MoS2 Nanosheets on Spindle‐Like α‐Fe2O3 as High‐Performance Core–Shell Pseudocapacitive Anodes for Fiber‐Shaped Aqueous Lithium‐Ion Capacitors

Fiber‐shaped aqueous lithium‐ion capacitors (FALICs) featured with high energy and power densities together with outstanding safety characteristics are emerging as promising electrochemical energy‐storage devices for future portable and wearable electronics. However, the lack of high‐capacitance fibrous anodes is a major bottleneck to achieve high performance FALICs. Here, hierarchical MoS₂@α‐Fe₂O₃ core–shell heterostructures consisting of spindle‐shaped α‐Fe₂O₃ cores and MoS₂ nanosheet shells on a carbon nanotube fiber (CNTF) are successfully fabricated. Originating from the unique core/shell architecture and prominent synergetic effects for multi‐components, the resulting MoS₂@α‐Fe₂O₃/CNTF anode delivers a remarkable specific capacitance of 2077.5 mF cm^?2 (554.0 F cm^?3) at 2 mA cm^?2, substantially outperforming most of the previously reported fibrous anode materials. Further density functional theory calculations reveal that the MoS₂@α‐Fe₂O₃ nano‐heterostructure possesses better electrical conductivity and stronger adsorption energy of Li⁺ than those of the individual MoS₂ and α‐Fe₂O₃. By paring with the self‐standing LiCoO₂/CNTF battery‐type cathode, a prototype quasi‐solid‐state FALIC with a maximum operating voltage of 2.0 V is constructed, achieving impressive specific capacitance (253.1 mF cm^?2) and admirable energy density (39.6 mWh cm^?3). Additionally, the newly developed FALICs can be woven into the flexible textile to power wearable electronics. This work presents a novel effective strategy to design high‐performance anode materials for next‐generation wearable ALICs.