m‐Indolocarbazole Derivative as a Universal Host Material for RGB and White Phosphorescent OLEDs

The host materials designed for highly efficient white phosphorescent organic light‐emitting diodes (PhOLEDs) with power efficiency (PE) >50 lm W^‐1 and low efficiency roll‐off are very rare. In this work, three new indolocarbazole‐based materials (ICDP, 4ICPPy, and 4ICDPy) are presented composed of 6,7‐dimethylindolo[3,2‐a]carbazole and phenyl or 4‐pyridyl group for hosting blue, green, and red phosphors. Among this three host materials, 4ICDPy‐based devices reveal the best electroluminescent performance with maximum external quantum efficiencies (EQEs) of 22.1%, 27.0%, and 25.3% for blue (FIrpic), green (fac‐Ir(ppy)₃), and red ((piq)₂Ir(acac)) PhOLEDs. A two‐color and single‐emitting‐layer white organic light‐emitting diode hosted by 4ICDPy with FIrpic and Ir(pq)₃ as dopants achieves high EQE of 20.3% and PE of 50.9 lm W^?1 with good color stability; this performance is among the best for a single‐emitting‐layer white PhOLEDs. All 4ICDPy‐based devices show low efficiency roll‐off probably due to the excellent balanced carrier transport arisen from the bipolar character of 4ICDPy.     

New Solution‐Processable Electron Transport Materials for Highly Efficient Blue Phosphorescent OLEDs

Several new solution‐processable organic semiconductors based on dendritic oligoquinolines were synthesized and were used as electron‐transport and hole‐blocking materials to realize highly efficient blue phosphorescent organic light‐emitting diodes (PhOLEDs). Various substitutions on the quinoline rings while keeping the central meta‐linked tris(quinolin‐2‐yl)benzene gave electron transport materials that combined wide energy gap (>3.3 eV), moderate electron affinity (2.55‐2.8 eV), and deep HOMO energy level (<‐6.08 eV) with electron mobility as high as 3.3 × 10^?3 cm² V^?1 s^?1. Polymer‐based PhOLEDs with iridium (III) bis(4,6‐(di‐fluorophenyl)pyridinato‐N,C^2′)picolinate (FIrpic) blue triplet emitter and solution‐processed oligoquinolines as the electron‐transport layers (ETLs) gave luminous efficiency of 30.5 cd A^?1 at a brightness of 4130 cd m^?2 with an external quantum efficiency (EQE) of 16.0%. Blue PhOLEDs incorporating solution‐deposited ETLs were over two‐fold more efficient than those containing vacuum‐deposited ETLs. Atomic force microscopy imaging shows that the solution‐deposited oligoquinoline ETLs formed vertically oriented nanopillars and rough surfaces that enable good ETL/cathode contacts, eliminating the need for cathode interfacial materials (LiF, CsF). These solution‐processed blue PhOLEDs have the highest performance observed to date in polymer‐based blue PhOLEDs.     

Synthesis and Characterization of Red‐Emitting Iridium(III) Complexes for Solution‐Processable Phosphorescent Organic Light‐Emitting Diodes

A new series of highly efficient red‐emitting phosphorescent Ir(III) complexes, (Et‐CVz‐PhQ)₂Ir(pic‐N‐O), (Et‐CVz‐PhQ)₂Ir(pic), (Et‐CVz‐PhQ)₂Ir(acac), (EO‐CVz‐PhQ)₂Ir(pic‐N‐O), (EO‐CVz‐PhQ)₂Ir(pic), and (EO‐CVz‐PhQ)₂Ir(acac), based on carbazole (CVz)‐phenylquinoline (PhQ) main ligands and picolinic acid N‐oxide (pic‐N‐O), picolinic acid (pic), and acetylacetone (acac) ancillary ligands, are synthesized for phosphorescent organic light‐emitting diodes (PhOLEDs), and their photophysical, electrochemical, and electroluminescent (EL) properties are investigated. All of the Ir(III) complexes have high thermal stability and emit an intense red light with an excellent color purity at CIE coordinates of (0.65,0.34). Remarkably, high‐performance solution‐processable PhOLEDs were fabricated using Ir(III) complexes with a pic‐N‐O ancillary ligand with a maximum external quantum efficiency (5.53%) and luminance efficiency (8.89 cd A^?1). The novel use of pic‐N‐O ancillary ligand in the synthesis of phosphorescent materials is reported. The performance of PhOLEDs using these Ir(III) complexes correlates well with the results of density functional theory calculations.     

Unexpected Sole Enol‐Form Emission of 2‐(2′‐Hydroxyphenyl)oxazoles for Highly Efficient Deep‐Blue‐Emitting Organic Electroluminescent Devices

Considerable efforts have been devoted to the development of highly efficient blue light‐emitting materials. However, deep‐blue fluorescence materials that can satisfy the Commission Internationale de l'Eclairage (CIE) coordinates of (0.14, 0.08) of the National Television System Committee (NTSC) standard blue and, moreover, possess a high external quantum efficiency (EQE) over 5%, remain scarce. Here, the unusual luminescence properties of triphenylamine‐bearing 2‐(2′‐hydroxyphenyl)oxazoles ( 3a–3c ) and their applications in organic light‐emitting diodes (OLEDs) are reported as highly efficient deep‐blue emitters. The 3a ‐based device exhibits a high spectral stability and an excellent color purity with a narrow full‐width at half‐maximum of 53 nm and the CIE coordinates of (0.15, 0.08), which is very close to the NTSC standard blue. The exciton utilization of the device closes to 100%, exceeding the theoretical limit of 25% in conventional fluorescent OLEDs. Experimental data and theoretical calculations demonstrate that 3a possesses a highly hybridized local and charge‐transfer excited state character. In OLEDs, 3a exhibits a maximum luminance of 9054 cd m^?2 and an EQE up to 7.1%, which is the first example of highly efficient blue OLEDs based on the sole enol‐form emission of 2‐(2′‐hydroxyphenyl)azoles.     

Rational Molecular Design for Deep‐Blue Thermally Activated Delayed Fluorescence Emitters

By simple modification of the functional groups on the donor unit, the thermally activated delayed fluorescence (TADF) properties of emitters can easily be manipulated. A series of deep blue to blue emissive TADF derivatives is developed, capable of deep‐blue emissions from 403 to 460 nm in toluene. Deep‐blue organic light‐emitting diodes (OLEDs) based on this series of TADF emitters are fabricated, resulting in an electroluminescence peak at 428 nm and a high external quantum efficiency of up to 10.3%. One deep‐blue OLED has achieved the commission internationale de l'eclairage (CIE) coordinates of (0.156, 0.063), which is among the best reported TADF performances for deep‐blue OLEDs with CIE_y < 0.07.     

Achieving Highly Efficient Fluorescent Blue Organic Light‐Emitting Diodes Through Optimizing Molecular Structures and Device Configuration

Based on the results of first‐principles calculations of the electronic properties of blue light‐emitting materials, the molecular structures of oligofluorenes are optimized by incorporating electron‐withdrawing groups into the molecules to balance hole and electron injection and transport for organic light‐emitting diodes (OLEDs). The result is a remarkable improvement in the maximum external quantum efficiency (EQE) of the undoped device from 2.0% to 4.99%. Further optimization of the device configurations and processing procedures, e.g., by changing the thickness of the emitting layer and through thermal annealing treatments, leads to a very high maximum EQE of 7.40% for the undoped sky‐blue device. Finally, by doping the emitter in a suitable host material, 4,4’‐bis(carbazol‐9‐yl)biphenyl (CBP), at the optimal concentration of 6%, pure blue emission with extremely high maximum EQE of 9.40% and Commission Internationale de l’Eclairage (CIE) coordinates of (0.147, 0.139) is achieved.     

Bisanthracene‐Based Donor–Acceptor‐type Light‐Emitting Dopants: Highly Efficient Deep‐Blue Emission in Organic Light‐Emitting Devices

Deep‐blue fluorescent compounds are particularly important in organic light‐emitting devices (OLEDs). A donor–accepotor (DA)‐type blue‐emitting compound, 1‐(10‐(4‐methoxyphenyl)anthracen‐9‐yl)‐4‐(10‐(4‐cyanophenyl)anthracen‐9‐yl)benzene ( BD3 ), is synthesized, and for comparison, a nonDA‐type compound, 1,4‐bis(10‐phenylanthracene‐9‐yl)benzene ( BD1 ) and a weak DA‐type compound, 1‐(10‐phenylanthracen‐9‐yl)‐4‐(10‐(4‐cyanophenyl)anthracen‐9‐yl)‐benzene ( BD2 ), are also synthesized. The twisted conformations of the two anthracene units in the compounds, confirmed by single crystal X‐ray analysis, effectively prevent π‐conjugation, and the compound shows deep‐blue photoluminescence (PL) with a high PL quantum efficiency, almost independent of the solvent polarity, resulting from the absence of an intramolecular charge transfer state. The DA‐type molecule BD3 in a non‐doped device exhibits a maximum external quantum efficiency (EQE) of 4.2% with a slight roll‐off, indicating good charge balance due to the DA‐type molecular design. In the doped device with 4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl (CBP) host, the BD3 exhibits higher EQE than 10% with Commission International de L'Eclairge (CIE) coordinates of (0.15, 0.06) and a narrow full‐width at half‐maximum of 45 nm, which is close to the CIE of the high definition television standard blue.     

High‐Efficiency Deep‐Blue Light‐Emitting Diodes Based on Phenylquinoline/Carbazole‐Based Compounds

Highly efficient deep‐blue fluorescent materials based on phenylquinoline–carbazole derivatives (PhQ‐CVz, MeO‐PhQ‐CVz, and CN‐PhQ‐CVz) are synthesized for organic light‐emitting diodes (OLEDs). The materials form high‐quality amorphous thin films by thermal evaporation and the energy levels can be easily adjusted by the introduction of different electron‐donating and electron‐withdrawing groups on carbazoylphenylquinoline. Non‐doped deep‐blue OLEDs that use PhQ‐CVz as the emitter show bright emission (Commission Internationale de L'Éclairage (CIE) coordinates, x = 0.156, y = 0.093) with an external quantum efficiency of 2.45%. Furthermore, the material works as an excellent host material for 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl dopant to get high‐performance OLEDs with excellent deep‐blue CIE coordinates (x = 0.155, y = 0.157), high power efficiency (5.98 lm W^?1), and high external quantum efficiency (5.22%).     

High‐Efficiency and Color Stable Blue‐Light‐Emitting Polymers and Devices

Novel fluorene‐based blue‐light‐emitting copolymers with an ultraviolet‐blue‐light (UV‐blue‐light) emitting host and a blue‐light emitting component, 4‐N,N‐diphenylaminostilbene (DPS) have been designed and synthesized by using the palladium‐ catalyzed Suzuki coupling reaction. It was found that both copolymers poly [2,7‐(9,9‐dioctylfluorene)‐alt‐1,3‐(5‐carbazolphenylene)] (PFCz) DPS1 and PFCz‐DPS1‐OXD show pure blue‐light emission even with only 1 % DPS units because of the efficient energy transfer from the UV‐blue‐light emitting PFCz segments to the blue‐light‐emitting DPS units. Moreover, because of the efficient energy transfer/charge trapping in these copolymers, PFCz‐DPS1 and PFCz‐DPS1‐OXD show excellent device performance with a very stable pure blue‐light emission. By using a neutral surfactant poly[9,9‐bis(6'‐(diethanolamino)hexyl)‐fluorene] (PFN‐OH) as the electron injection layer, the device based on PFCz‐DPS1‐OXD5 with the configuration of ITO/PEDOT:PSS/PVK/polymer/PFN‐OH/Al showed a maximum quantum efficiency of 2.83 % and a maximum luminous efficiency of 2.50 cd A^–1. Its CIE 1931 chromaticity coordinates of (0.156, 0.080) match very well with the NTSC standard blue pixel coordinates of (0.14, 0.08). These results indicate that this kind of dopant/host copolymer could be a promising candidate for blue‐light‐emitting polymers with high efficiency, good color purity, and excellent color stability.     

Study of Configuration Differentia and Highly Efficient,Deep‐Blue,Organic Light‐Emitting Diodes Based on Novel Naphtho[1,2‐d]imidazole Derivatives

Two novel naphtho[1,2‐d]imidazole derivatives are developed as deep‐blue, light‐emitting materials for organic light‐emitting diodes (OLEDs). The 1H‐naphtho[1,2‐d]imidazole based compounds exhibit a significantly superior performance than the 3H‐naphtho[1,2‐d]imidazole analogues in the single‐layer devices. This is because they have a much higher capacity for direct electron‐injection from the cathode compared to their isomeric counterparts resulting in a ground‐breaking EQE (external quantum efficiency) of 4.37% and a low turn‐on voltage of 2.7 V, and this is hitherto the best performance for a non‐doped single‐layer fluorescent OLED. Multi‐layer devices consisting of both hole‐ and electron‐transporting layers, result in identically excellent performances with EQE values of 4.12–6.08% and deep‐blue light emission (Commission Internationale de l'Eclairage (CIE) y values of 0.077–0.115) is obtained for both isomers due to the improved carrier injection and confinement within the emissive layer. In addition, they showed a significantly better blue‐color purity than analogous molecules based on benzimidazole or phenanthro[9,10‐d]imidazole segments.     

Molecular Engineering of Blue Fluorescent Molecules Based on Silicon End‐Capped Diphenylaminofluorene Derivatives for Efficient Organic Light‐Emitting Materials

Blue fluorescent materials based on silicone end‐capped 2‐diphenylaminofluorene derivatives are synthesized and characterized. These materials are doped into a 2‐methyl‐9,10‐di‐[2‐naphthyl]anthracene host as blue dopant materials in the emitting layer of organic light‐emitting diode devices bearing a structure of ITO/DNTPD (60 nm)/NPB (30 nm)/emitting layer (30 nm)/Alq₃ (20 nm)/LiF (1.0 nm)/Al (200 nm). All devices exhibit highly efficient blue electroluminescence with high external quantum efficiencies (3.47%–7.34% at 20 mA cm^?2). The best luminous efficiency of 11.2 cd A^?1 and highest quantum efficiency of 7.34% at 20 mA cm^?2 are obtained in a device with CIE coordinates (0.15, 0.25). A deep‐blue OLED with CIE coordinates (0.15, 0.14) exhibits a luminous efficiency of 3.70 cd A^?1 and quantum efficiency of 3.47% at 20 mA cm^?2.     

A Light‐Blue Phosphorescent Dendrimer for Efficient Solution‐Processed Light‐Emitting Diodes

We describe the preparation of a dendrimer that is solution‐processible and contains 2‐ethylhexyloxy surface groups, biphenyl‐based dendrons, and a fac‐tris[2‐(2,4‐difluorophenyl)pyridyl]iridium(III ) core. The homoleptic complex is highly luminescent and the color of emission is similar to the heteroleptic iridium(III ) complex, bis[2‐(2,4‐difluorophenyl)pyridyl]picolinate iridium(III ) (FIrpic). To avoid the change in emission color that would arise from attaching a conjugated dendron to the ligand, the conjugation between the dendron and the ligand is decoupled by separating them with an ethane linkage. Bilayer devices containing a light‐emitting layer comprised of a 30 wt.‐% blend of the dendrimer in 1,3‐bis(N‐carbazolyl)benzene (mCP) and a 1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene electron‐transport layer have external quantum and power efficiencies, respectively, of 10.4 % and 11 lm W^–1 at 100 cd m^–2 and 6.4 V. These efficiencies are higher than those reported for more complex device structures prepared via evaporation that contain FIrpic blended with mCP as the emitting layer, showing the advantage of using a dendritic structure to control processing and intermolecular interactions. The external quantum efficiency of 10.4 % corresponds to the maximum achievable efficiency based on the photoluminescence quantum yield of the emissive film and the standard out‐coupling of light from the device.     

An Exciplex Forming Host for Highly Efficient Blue Organic Light Emitting Diodes with Low Driving Voltage

The exciplex forming co‐host with phosphorescent dopant system has potential to realize highly efficient phosphorescent organic light emitting didoes (PhOLEDs). However, the exciplex forming co‐host for blue phosphorescent OLEDs has been rarely introduced because of higher triplet level of the blue dopant than green and red dopants. In this work, a novel exciplex forming co‐host with high triplet energy level is developed by mixing a phosphine oxide based electron transporting material, PO‐T2T, and a hole transporting material, N,N′‐dicarbazolyl‐3,5‐benzene (mCP). Photo‐physical analysis shows that the exciplexes are formed efficiently in the host and the energy transfer from the exciplex to blue phosphorescent dopant (iridium(III)bis[(4,6‐difluorophenyl)‐pyridinato‐N,C2′]picolinate; FIrpic) is also efficient, enabling the triplet harvest without energy loss. As a result, an unprecedented high performance blue PhOLED with the exciplex forming co‐host is demonstrated, showing a maximum external quantum efficiency (EQE) of 30.3%, a maximum power efficiency of 66 lm W^?1, and low driving voltage of 2.75 at 100 cd m^?2, 3.29 V at 1000 cd m^?2, and 4.65 V at 10 000 cd m^?2, respectively. The importance of the exciton confinement in the exciplex forming co‐host is further investigated which is directly related to the performance of PhOLEDs.     

Solution‐Processed,Alkali Metal‐Salt‐Doped,Electron‐Transport Layers for High‐Performance Phosphorescent Organic Light‐Emitting Diodes

High‐performance, blue, phosphorescent organic light‐emitting diodes (PhOLEDs) are achieved by orthogonal solution‐processing of small‐molecule electron‐transport material doped with an alkali metal salt, including cesium carbonate (Cs₂CO₃) or lithium carbonate (Li₂CO₃). Blue PhOLEDs with solution‐processed 4,7‐diphenyl‐1,10‐phenanthroline (BPhen) electron‐transport layer (ETL) doped with Cs₂CO₃ show a luminous efficiency (LE) of 35.1 cd A^?1 with an external quantum efficiency (EQE) of 17.9%, which are two‐fold higher efficiency than a BPhen ETL without a dopant. These solution‐processed blue PhOLEDs are much superior compared to devices with vacuum‐deposited BPhen ETL/alkali metal salt cathode interfacial layer. Blue PhOLEDs with solution‐processed 1,3,5‐tris(m‐pyrid‐3‐yl‐phenyl)benzene (TmPyPB) ETL doped with Cs₂CO₃ have a luminous efficiency of 37.7 cd A^?1 with an EQE of 19.0%, which is the best performance observed to date in all‐solution‐processed blue PhOLEDs. The results show that a small‐molecule ETL doped with alkali metal salt can be realized by solution‐processing to enhance overall device performance. The solution‐processed metal salt‐doped ETLs exhibit a unique rough surface morphology that facilitates enhanced charge‐injection and transport in the devices. These results demonstrate that orthogonal solution‐processing of metal salt‐doped electron‐transport materials is a promising strategy for applications in various solution‐processed multilayered organic electronic devices.     

Efficient Nondoped Blue Fluorescent Organic Light‐Emitting Diodes (OLEDs) with a High External Quantum Efficiency of 9.4% @ 1000 cd m−2 Based on Phenanthroimidazole−Anthracene Derivative

Organic light‐emitting diodes (OLEDs) can promise flexible, light weight, energy conservation, and many other advantages for next‐generation display and lighting applications. However, achieving efficient blue electroluminescence still remains a challenge. Though both phosphorescent and thermally activated delayed fluorescence materials can realize high‐efficiency via effective triplet utilization, they need to be doped into appropriate host materials and often suffer from certain degree of efficiency roll‐off. Therefore, developing efficient blue‐emitting materials suitable for nondoped device with little efficiency roll‐off is of great significance in terms of practical applications. Herein, a phenanthroimidazole?anthracene blue‐emitting material is reported that can attain high efficiency at high luminescence in nondoped OLEDs. The maximum external quantum efficiency (EQE) of nondoped device is 9.44% which is acquired at the luminescence of 1000 cd m^?2. The EQE is still as high as 8.09% even the luminescence reaches 10 000 cd m^?2. The maximum luminescence is ≈57 000 cd m^?2. The electroluminescence (EL) spectrum shows an emission peak of 470 nm and the Commission International de L'Eclairage (CIE) coordinates is (0.14, 0.19) at the voltage of 7 V. To the best of the knowledge, this is among the best results of nondoped blue EL devices.     

White Organic Light‐Emitting Diodes with Evenly Separated Red,Green, and Blue Colors for Efficiency/Color‐Rendition Trade‐Off Optimization

A novel yellowish‐green triplet emitter, bis(5‐(trifluoromethyl)‐2‐p‐tolylpyridine) (acetylacetonate)iridium(III) (1), was conveniently synthesized and used in the fabrication of both monochromatic and white organic light‐emitting diodes (WOLEDs). At the optimal doping concentration, monochromatic devices based on 1 exhibit a high efficiency of 63 cd A^?1 (16.3% and 36.6 lm W^?1) at a luminance of 100 cd m^?2. By combining 1 with a phosphorescent sky‐blue emitter, bis(3,5‐difluoro‐2‐(2‐pyridyl)phenyl)‐(2‐carboxypyridyl)iridium(III) (FIrPic), and a red emitter, bis(2‐benzo[b]thiophen‐2‐yl‐pyridine)(acetylacetonate)iridium(III) (Ir(btp)₂(acac)), the resulting electrophosphorescent WOLEDs show three evenly separated main peaks and give a high efficiency of 34.2 cd A^?1 (13.2% and 18.5 lm W^?1) at a luminance of 100 cd m^?2. When 1 is mixed with a deep‐blue fluorescent emitter, 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl (BCzVBi), and Ir(btp)₂(acac), the resulting hybrid WOLEDs demonstrate a high color‐rendering index of 91.2 and CIE coordinates of (0.32, 0.34). The efficient and highly color‐pure WOLEDs based on 1 with evenly separated red, green, blue peaks and a high color‐rendering index outperform those of the state‐of‐the‐art emitter, fac‐tris(2‐phenylpyridine)iridium(III) (Ir(ppy)₃), and are ideal candidates for display and lighting applications.     

High‐Performance Red,Green, and Blue Electroluminescent Devices Based on Blue Emitters with Small Singlet–Triplet Splitting and Ambipolar Transport Property

Two coordination complex emitters as well as host materials Be(PPI)₂ and Zn(PPI)₂ (PPI = 2‐(1‐phenyl‐1H‐phenanthro[9,10‐d]imidazol‐2‐yl)phenol) are designed, synthesized, and characterized. The incorporation of the metal atom leads to a twisted conformation and rigid molecular structure, which improve the thermal stability of Be(PPI)₂ and Zn(PPI)₂ with high T_d and T_g at around 475 and 217 °C, respectively. The introduction of the electron‐donating phenol group results in the emission color shifting to the deep‐blue region and the emission maximum appears at around 429 nm. This molecular design strategy ensures that the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) HOMO and LUMO of Be(PPI)₂ and Zn(PPI)₂ localize on the different moieties of the molecules. Therefore, the two complexes have an ambipolar transport property and a small singlet–triplet splitting of 0.35 eV for Be(PPI)₂ and 0.21 eV for Zn(PPI)₂. An undoped deep‐blue fluorescent organic light‐emitting device (OLED) that uses Be(PPI)₂ as emitter exhibits a maximum power efficiency of 2.5 lm W^?1 with the CIE coordinates of (0.15, 0.09), which are very close to the National Television Standards Committee (NTSC) blue standard (CIE: 0.14, 0.08). Green and red phosphorescent OLEDs (PhOLEDs) that use Be(PPI)₂ and Zn(PPI)₂ as host materials show high performance. Highest power efficiencies of 67.5 lm W^?1 for green PhOLEDs and 21.7 lm W^?1 for red PhOLEDs are achieved. In addition, the Be(PPI)₂‐based devices show low‐efficiency roll‐off behavior, which is attributed to the more balanced carrier‐transport property of Be(PPI)₂.     

Highly Efficient Non‐Doped Blue‐Light‐Emitting Diodes Based on an Anthrancene Derivative End‐Capped with Tetraphenylethylene Groups

A novel blue‐emitting material, 2‐tert‐butyl‐9,10‐bis[4‐(1,2,2‐triphenylvinyl)phenyl]anthracene ( TPVAn ), which contains an anthracene core and two tetraphenylethylene end‐capped groups, has been synthesized and characterized. Owing to the presence of its sterically congested terminal groups, TPVAn possesses a high glass transition temperature (155 °C) and is morphologically stable. Organic light‐emitting diodes (OLEDs) utilizing TPVAn as the emitter exhibit bright saturated‐blue emissions (Commission Internationale de L'Eclairage (CIE) chromaticity coordinates of x = 0.14 and y = 0.12) with efficiencies as high as 5.3 % (5.3 cd A^–1)—the best performance of non‐doped deep blue‐emitting OLEDs reported to date. In addition, TPVAn doped with an orange fluorophore served as an authentic host for the construction of a white‐light‐emitting device that displayed promising electroluminescent characteristics: the maximum external quantum efficiency reached 4.9 % (13.1 cd A^–1) with CIE coordinates located at (0.33, 0.39).     

Unexpected Propeller‐Like Hexakis(fluoren‐2‐yl)benzene Cores for Six‐Arm Star‐Shaped Oligofluorenes: Highly Efficient Deep‐Blue Fluorescent Emitters and Good Hole‐Transporting Materials

Grafting six fluorene units to a benzene ring generates a new highly twisted core of hexakis(fluoren‐2‐yl)benzene. Based on the new core, six‐arm star‐shaped oligofluorenes from the first generation T1 to third generation T3 are constructed. Their thermal, photophysical, and electrochemical properties are studied, and the relationship between the structures and properties is discussed. Simple double‐layer electroluminescence (EL) devices using T1–T3 as non‐doped solution‐processed emitters display deep‐blue emissions with Commission Internationale de l'Eclairage (CIE) coordinates of (0.17, 0.08) for T1 , (0.16, 0.08) for T2 , and (0.16, 0.07) for T3 . These devices exhibit excellent performance, with maximum current efficiency of up to 5.4 cd A^?1, and maximum external quantum efficiency of up to 6.8%, which is the highest efficiency for non‐doped solution‐processed deep‐blue organic light‐emitting diodes (OLEDs) based on starburst oligofluorenes, and is even comparable with other solution‐processed deep‐blue fluorescent OLEDs. Furthermore, T2‐ and T3‐ based devices show striking blue EL color stability independent of driving voltage. In addition, using T0–T3 as hole‐transporting materials, the devices of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS)/ T0–T3 /tris(8‐hydroxyquinolinato)aluminium (Alq₃)/LiF/Al achieve maximum current efficiencies of 5.51–6.62 cd A^?1, which are among the highest for hole‐transporting materials in identical device structure.     

Solution‐Processible Phosphorescent Blue Dendrimers Based on Biphenyl‐Dendrons and Fac‐tris(phenyltriazolyl)iridium(III) Cores

Solution‐processible saturated blue phosphorescence is an important goal for organic light‐emitting diodes (OLEDs). Fac‐tris(5‐aryltriazolyl)iridium(III) complexes can emit blue phosphorescence at room temperature. Mono‐ and doubly dendronized fac‐tris(1‐methyl‐5‐phenyl‐3‐n‐propyl‐1H‐[1,2,4]triazolyl)iridium(III) 1 and fac‐tris{1‐methyl‐5‐(4‐fluorophenyl)‐3‐n‐propyl‐1H‐[1,2,4]triazolyl}iridium(III) 4 with first generation biphenyl‐based dendrons were prepared. The dendrimers emitted blue light at room temperature and could be solution processed to form thin films. The doubly dendronized 3 had a film photoluminescence quantum yield of 67% and Commission Internationale de l'Eclairage (CIE) coordinates of (0.17, 0.33). OLEDs comprised of a neat film of dendrimer 3 and an electron transport layer achieved a brightness of 142 cd m^?2 at 3.8 V with an external quantum efficiency of 7.9%, and CIE coordinates of (0.18, 0.35). Attachment of the fluorine atom to the emissive core had the effect of moving the luminescence to shorter wavelengths but also quenched the luminescence of the mono‐ and doubly dendronized dendrimers.