Capacitive Enhancement Mechanisms and Design Principles of High‐Performance Graphene Oxide‐Based All‐Solid‐State Supercapacitors

Graphene oxide (GO)‐based all‐solid‐state supercapacitors (GO‐A3Ss) are superior over liquid electrolyte‐based supercapacitors and capable of being integrated on a single chip in various geometry shapes for the use of future smart wearable electronics field as a fast energy storage device, but their capacitance need to be improved. Here, a new approach has been developed for enhancing the capacitive capability of the supercapacitors through molecular dynamics simulations with the first‐principle input. A theoretical model of charge storage is developed to understand the unique capacitive enhancement mechanism and to predict the capacitance of the GO‐A3Ss, which agrees well with the experimental observations. A novel supercapacitor with GO and reduced graphene oxide (rGO) alternatively layered structures is designed based on the model, and its energy density is the highest among conventional supercapacitors using liquid electrolytes and all‐solid‐state supercapacitors using aerogels or hydrogels as the solid‐state electrolyte. Based on the predictions, two new types of high‐performance GO/rGO multilayered capacitors are proposed to meet different practical applications. The results of this work provide an approach for the design of high‐performance all‐solid‐state supercapacitors based on GO and rGO materials.     

Ultralight and Binder‐Free All‐Solid‐State Flexible Supercapacitors for Powering Wearable Strain Sensors

Flexible energy storage devices play a pivotal role in realizing the full potential of flexible electronics. This work presents high‐performance, all‐solid‐state, flexible supercapacitors by employing an innovative multilevel porous graphite foam (MPG). MPGs exhibit superior properties, such as large specific surface area, high electric conductivity, low mass density, high loading efficiency of pseudocapacitive materials, and controlled corrugations for accommodating mechanical strains. When loaded with pseudocapacitive manganese oxide (Mn₃O₄), the MPG/Mn₃O₄ (MPGM) composites achieve a specific capacitance of 538 F g^?1 (1 mV s^?1) and 260 F g^?1 (1 mV s^?1) based on the mass of pure Mn₃O₄ and entire electrode composite, respectively. Both are among the best of Mn₃O₄‐based supercapacitors. The MPGM is mechanically robust and can go through 1000 mechanical bending cycles with only 1.5% change in electric resistance. When integrated as all‐solid‐state symmetric supercapacitors, they offer a full cell specific capacitance as high as 53 F g^?1 based on the entire electrode and retain 80% of capacitance after 1000 continuous mechanical bending cycles. Furthermore, the all‐solid‐state flexible supercapacitors are incorporated with strain sensors into self‐powered flexible devices for detection of both coarse and fine motions on human skins, i.e., those from finger bending and heart beating.     

Foldable All‐Solid‐State Supercapacitors Integrated with Photodetectors

Recent development in flexible electronics has promoted the increasing demand for their energy storage systems that will be lightweight, thin, flexible, and even foldable. Although various flexible supercapacitors recently have been successfully developed, the design and assembly of highly foldable supercapacitors have received less attention. Furthermore, foldable supercapacitors are in general operated independently with other electronics, resulting in some space and energy consumption from the external connection system. Therefore, the authors fabricate the foldable all‐solid‐state integrated devices with supercapacitor and photodetector functions in a simplified and compact configuration based on single‐walled carbon nanotube films and TiO₂ nanoparticles. The integrated devices not only retain the intrinsic capacitance behavior but also show excellent sensitivity of detecting white light. More importantly, the capacitance behavior of integrated devices remains almost unchanged and the photodetector behavior is quite stable even folded by 180° due to their unique integrated configuration. Such rational design of all‐solid‐state integrated devices will pave the way for assembling energy storage devices and other electronics into highly flexible and foldable integrated devices.     

Solid‐State Hybrid Fibrous Supercapacitors Produced by Dead‐End Tube Membrane Ultrafiltration

The development of flexible supercapacitors with high volumetric performance is critically important for portable electronics applications, which are severely volume limited. Here, dead‐end tube membrane (DETM) ultrafiltration is used to produce densely compacted carbon‐nanotube/graphene fibrous films as solid‐state supercapacitor electrodes. DETM is widely used in the water purification industry, but to date its use has not been explored for making supercapacitor electrode materials. Compared with vacuum‐assisted filtration, dead‐end filtration of the mixture through a porous membrane is carried out under much higher pressure, and thus the solvent can be gotten rid of much faster, with less energy consumption and in an environmentally friendly manner. More importantly, phase separation of the solid constituents in the mixture, due to concentration increase, can be suppressed in DETM. Therefore, highly uniform and densely compacted supercapacitor electrodes can be obtained with very high volumetric energy and power density. The volumetric energy density in this work (≈2.7 mWh cm^‐3) is at a higher level than all the all‐solid‐state fibrous supercapacitors reported to date. This can be attributed to the DETM process used, which produces a densely compacted network structure without compromising the availability of electrochemically active surface area.     

A Low‐Cost,Self‐Standing NiCo2O4@CNT/CNT Multilayer Electrode for Flexible Asymmetric Solid‐State Supercapacitors

The demand for a new generation of flexible, portable, and high‐capacity power sources increases rapidly with the development of advanced wearable electronic devices. Here we report a simple process for large‐scale fabrication of self‐standing composite film electrodes composed of NiCo₂O₄@carbon nanotube (CNT) for supercapacitors. Among all composite electrodes prepared, the one fired in air displays the best electrochemical behavior, achieving a specific capacitance of 1,590 F g^?1 at 0.5 A g^?1 while maintaining excellent stability. The NiCo₂O₄@CNT/CNT film electrodes are fabricated via stacking NiCo₂O₄@CNT and CNT alternately through vacuum filtration. Lightweight, flexible, and self‐standing film electrodes (≈24.3 µm thick) exhibit high volumetric capacitance of 873 F cm^?3 (with an areal mass of 2.5 mg cm^?2) at 0.5 A g^?1. An all‐solid‐state asymmetric supercapacitor consists of a composite film electrode and a treated carbon cloth electrode has not only high energy density (≈27.6 Wh kg^?1) at 0.55 kW kg^?1 (including the weight of the two electrodes) but also excellent cycling stability (retaining ≈95% of the initial capacitance after 5000 cycles), demonstrating the potential for practical application in wearable devices.     

Flexible All‐Solid‐State Supercapacitors of High Areal Capacitance Enabled by Porous Graphite Foams with Diverging Microtubes

The practical applications of wearable electronics rely on the successful development of flexible and integrable energy devices with small footprints. This work reports a completely new type of graphite foam made of strategically created superstructures with covalently attached diverging microtubes, and their applications as electrode supports for binder‐free and additive‐free flexible supercapacitors. Because of the enhanced volumetric surface areas compared to conventional graphite foams, a high loading of pseudocapacitive materials (Mn₃O₄, 3.91 mg cm^?2, 78 wt%) is achieved. The supercapacitors provide areal capacitances as high as 820 mF cm^?2 at 1 mV s^?1, while still maintaining high rate capability and 88% retention of capacitance after 3000 continuous charging and discharging cycles. When assembled as all‐solid‐state flexible symmetric supercapacitors, they offer one of the highest full‐cell capacitances (191 mF cm^?2) among similar manganese oxide/graphene foams, and retain 80% capacitance after 1000 mechanical cycles. The potential of such flexible supercapacitors is also manifested by directly powering electric nanomotors that can trace along letters “U” and T,” which is the first demonstration of flexible supercapacitors for wireless/portable nanomanipulation systems. This work could inspire a new paradigm in designing and creating 3D porous micro/nanosuperstructures for an array of self‐powered electronic and nanomechanical applications.     

Flexible Solid‐State Supercapacitors with Enhanced Performance from Hierarchically Graphene Nanocomposite Electrodes and Ionic Liquid Incorporated Gel Polymer Electrolyte

High energy density, durability, and flexibility of supercapacitors are required urgently for the next generation of wearable and portable electronic devices. Herein, a novel strategy is introduced to boost the energy density of flexible soild‐state supercapacitors via rational design of hierarchically graphene nanocomposite (GNC) electrode material and employing an ionic liquid gel polymer electrolyte. The hierarchical graphene nanocomposite consisting of graphene and polyaniline‐derived carbon is synthesized as an electrode material via a scalable process. The meso/microporous graphene nanocomposites exhibit a high specific capacitance of 176 F g^?1 at 0.5 A g^?1 in the ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) with a wide voltage window of 3.5 V, good rate capability of 80.7% in the range of 0.5–10 A g^?1 and excellent stability over 10 000 cycles, which is attributed to the superior conductivity (7246 S m^?1), and quite large specific surface area (2416 m² g^?1) as well as hierarchical meso/micropores distribution of the electrode materials. Furthermore, flexible solid‐state supercapacitor devices based on the GNC electrodes and gel polymer electrolyte film are assembled, which offer high specific capacitance of 180 F g^?1 at 1 A g^?1, large energy density of 75 Wh Kg^?1, and remarkable flexible performance under consecutive bending conditions.     

General Method for Large‐Area Films of Carbon Nanomaterials and Application of a Self‐Assembled Carbon Nanotube Film as a High‐Performance Electrode Material for an All‐Solid‐State Supercapacitor

Rational assembly of carbon nanostructures into large‐area films is a key step to realize their applications in ubiquitous electronics and energy devices. Here, a self‐assembly methodology is devised to organize diverse carbon nanostructures (nanotubes, dots, microspheres, etc.) into homogeneous films with potentially infinite lateral dimensions. On the basis of studies of the redox reactions in the systems and the structures of films, the spontaneous deposition of carbon nanostructures onto the surface of the copper substrate is found to be driven by the electrical double layer between copper and solution. As a notable example, the as‐assembled multiwalled carbon nanotube (MWCNT) films display exceptional properties. They are a promising material for flexible electronics with superior electrical and mechanical compliance characteristics. Finally, two kinds of all‐solid‐state supercapacitors based on the self‐assembled MWCNT films are fabricated. The supercapacitor using carbon cloth as the current collector delivers an energy density of 3.5 Wh kg^?1 and a power density of 28.1 kW kg^?1, which are comparable with the state‐of‐the‐art supercapacitors fabricated by the costly single‐walled carbon nanotubes and arrays. The supercapacitor free of foreign current collector is ultrathin and shows impressive volumetric energy density (0.58 mWh cm^?3) and power density (0.39 W cm^?3) too.     

An Interface‐Induced Co‐Assembly Approach Towards Ordered Mesoporous Carbon/Graphene Aerogel for High‐Performance Supercapacitors

Hierarchically porous composites with mesoporous carbon wrapping around the macroporous graphene aerogel can combine the advantages of both components and are expected to show excellent performance in electrochemical energy devices. However, the fabrication of such composites is challenging due to the lack of an effective strategy to control the porosity of the mesostructured carbon layers. Here an interface‐induced co‐assembly approach towards hierarchically mesoporous carbon/graphene aerogel composites, possessing interconnected macroporous graphene networks covered by highly ordered mesoporous carbon with a diameter of ≈9.6 nm, is reported. And the orientation of the mesopores (vertical or horizontal to the surface of the composites) can be tuned by the ratio of the components. As the electrodes in supercapacitors, the resulting composites demonstrate outstanding electrochemical performances. More importantly, the synthesis strategy provides an ideal platform for hierarchically porous graphene composites with potential for energy storage and conversion applications.     

Controlled Incorporation of Ni(OH)2 Nanoplates Into Flowerlike MoS2 Nanosheets for Flexible All‐Solid‐State Supercapacitors

In this work, self‐supporting three‐dimensional hierarchical nanostructured MoS₂@Ni(OH)₂ nanocomposites are synthesized via a facile single‐mode microwave hydrothermal technique. The fabricated MoS₂@Ni(OH)₂ nanocomposites for supercapacitors in aqueous electrolyte exhibit higher specific capacitance and better cyclic stability than those of MoS₂ and Ni(OH)₂ due to the pronounced synergistic effect between MoS₂ and Ni(OH)₂. Further, the flexible all‐solid‐state supercapcitor is readily constructed by composing the PVA/KOH gel electrolyte in between two MoS₂@Ni(OH)₂ electrodes on the flexible PET substrates. The resulting supercapacitors can operate at high rate up to 1000 V/s, have excellent long‐life cycling stability, retaining 94.2% of the initial capacitance after 9000 cycles, and mechanical flexibility during extreme bending, respectively. Thereby, the MoS₂@Ni(OH)₂ nanocomposites are a promising electrode materials for flexible long‐life cycling all‐solid‐sate supercapacitors.     

Microporosity‐Controlled Synthesis of Heteroatom Codoped Carbon Nanocages by Wrap‐Bake‐Sublime Approach for Flexible All‐Solid‐State‐Supercapacitors

Heteroatom‐doped carbon nanomaterials with high surface area and tunable microporosity are important but they generally require difficult and multistep syntheses. Herein, a simple and straightforward strategy is introduced that involves a wrap‐bake‐sublime approach to synthesize microporosity controlled and heteroatom codoped carbon nanocages. A zinc‐containing zeolitic imidazolate framework (ZIF‐8) core is wrapped in a cross‐linked oligomer containing nitrogen and phosphorus, oligo(cyclotriphosphazene‐co‐hexahydroxytriphenylene) (OCHT). As‐synthesized core–shell ZIF‐8‐OCHT nanoparticles are baked at high temperatures to sublimate zinc through OCHT shell, resulting in a porous structure. Meanwhile, hollow cavities are introduced into N,P codoped carbon nanocages (NPCNs) via the sacrificial nature of ZIF‐8 template. The microporosity is finely tuned by controlling thickness of the OCHT shell during synthesis of the core–shell nanoparticles, since the sublimation tendency of zinc component at high temperatures depends on the thickness of OCHT shell. A systematic correlation between the electrochemical performance of NPCNs and their microporosity is confirmed. Furthermore, the electrochemical performance of the NPCNs is related to the degree of heteroatom codoping. The approach is successfully scaled‐up without compromising their electrochemical performance. Finally, a symmetric and flexible all‐solid‐state‐supercapacitor with high energy and power density, and a long‐term cycleability is demonstrated (75% capacitance retention after 20 000 cycles).     

All‐Solid‐State Asymmetric Supercapacitors with Metal Selenides Electrodes and Ionic Conductive Composites Electrolytes

All‐solid‐state flexible asymmetric supercapacitors (ASCs) are developed by utilization of graphene nanoribbon (GNR)/Co_0.85Se composites as the positive electrode, GNR/Bi₂Se₃ composites as the negative electrode, and polymer‐grafted‐graphene oxide membranes as solid‐state electrolytes. Both GNR/Co_0.85Se and GNR/Bi₂Se₃ composite electrodes are developed by a facile one‐step hydrothermal growth method from graphene oxide nanoribbons as the nucleation framework. The GNR/Co_0.85Se composite electrode exhibits a specific capacity of 76.4 mAh g^?1 at a current density of 1 A g^?1 and the GNR/Bi₂Se₃ composite electrode exhibits a specific capacity of 100.2 mAh g^?1 at a current density of 0.5 A g^?1. Moreover, the stretchable membrane solid‐state electrolytes exhibit superior ionic conductivity of 108.7 mS cm^?1. As a result, the flexible ASCs demonstrate an operating voltage of 1.6 V, an energy density of 30.9 Wh kg^?1 at the power density of 559 W kg^?1, and excellent cycling stability with 89% capacitance retention after 5000 cycles. All these results demonstrate that this study provides a simple, scalable, and efficient approach to fabricate high performance flexible all‐solid‐state ASCs for energy storage.     

Wood‐Inspired Morphologically Tunable Aligned Hydrogel for High‐Performance Flexible All‐Solid‐State Supercapacitors

Oriented microstructures are widely found in various biological systems for multiple functions. Such anisotropic structures provide low tortuosity and sufficient surface area, desirable for the design of high‐performance energy storage devices. Despite significant efforts to develop supercapacitors with aligned morphology, challenges remain due to the predefined pore sizes, limited mechanical flexibility, and low mass loading. Herein, a wood‐inspired flexible all‐solid‐state hydrogel supercapacitor is demonstrated by morphologically tuning the aligned hydrogel matrix toward high electrode‐materials loading and high areal capacitance. The highly aligned matrix exhibits broad morphological tunability (47–12 µm), mechanical flexibility (0°–180° bending), and uniform polypyrrole loading up to 7 mm thick matrix. After being assembled into a solid‐state supercapacitor, the areal capacitance reaches 831 mF cm^?2 for the 12 µm matrix, which is 259% times of the 47 µm matrix and 403% times of nonaligned matrix. The supercapacitor also exhibits a high energy density of 73.8 µWh cm^?2, power density of 4960 µW cm^?2, capacitance retention of 86.5% after 1000 cycles, and bending stability of 95% after 5000 cycles. The principle to structurally design the oriented matrices for high electrode material loading opens up the possibility for advanced energy storage applications.     

Strong,Machinable Carbon Aerogels for High Performance Supercapacitors

Designing macroscopic, 3D porous conductive materials with high mechanical strength is of great importance in many fields, including energy storage, catalysis, etc. This study reports a novel approach to fabricate polyaniline‐coated 3D carbon x‐aerogels, a special type of aerogels with mechanically strong, highly cross‐linked structure that allows the originally brittle aerogels machinable. This approach is accomplished by introducing a small amount of graphene into the sol–gel process of resorcinol and formaldehyde, followed by physical activation and subsequent cross‐linking with polyaniline via electropolymerization. The resulting x‐aerogels are not only porous and conductive, but also mechanically robust with high compressibility and fast recovery. The strong combination of these properties makes the x‐aerogels promising for high performance supercapacitors that are designed to provide additional functionality for wearable and portable electronics. Such multi‐functionality leads to a significant increase in electrochemical performance, in particular high volumetric capacitance, which results from the more densely packed electroactive structure in three dimensions. More importantly, monoliths of carbon x‐aerogels are machinable into thin slices without losing their properties, thus enabling effective integration into devices with different sizes and shapes.     

Self‐Powered Electronics by Integration of Flexible Solid‐State Graphene‐Based Supercapacitors with High Performance Perovskite Hybrid Solar Cells

To develop high‐capacitance flexible solid‐state supercapacitors and explore its application in self‐powered electronics is one of ongoing research topics. In this study, self‐stacked solvated graphene (SSG) films are reported that have been prepared by a facile vacuum filtration method as the free‐standing electrode for flexible solid‐state supercapacitors. The highly hydrated SSG films have low mass loading, high flexibility, and high electrical conductivity. The flexible solid‐state supercapacitors based on SSG films exhibit excellent capacitive characteristics with a high gravimetric specific capacitance of 245 F g^?1 and good cycling stability of 10 000 cycles. Furthermore, the flexible solid‐state supercapacitors are integrated with high performance perovskite hybrid solar cells (pero‐HSCs) to build self‐powered electronics. It is found that the solid‐state supercapacitors can be charged by pero‐HSCs and discharged from 0.75 V. These results demonstrate that the self‐powered electronics by integration of the flexible solid‐state supercapacitors with pero‐HSCs have great potential applications in storage of solar energy and in flexible electronics, such as portable and wearable personal devices.     

A High‐Performance Graphene Oxide‐Doped Ion Gel as Gel Polymer Electrolyte for All‐Solid‐State Supercapacitor Applications

A high‐performance graphene oxide (GO)‐doped ion gel (P(VDF‐HFP)‐EMIMBF₄‐GO gel) is prepared by exploiting copolymer (poly(vinylidene fluoride‐hexafluoro propylene), P(VDF‐HFP)) as the polymer matrix, ionic liquid (1‐ethyl‐3‐methylimidazolium tetrafluoroborate, EMIMBF₄) as the supporting electrolyte, and GO as the ionic conducting promoter. This GO‐doped ion gel demonstrates significantly improved ionic conductivity compared with that of pure ion gel without the addition of GO, due to the homogeneously distributed GO as a 3D network throughout the GO‐doped ion gel by acting like a ion “highway” to facilitate the ion transport. With the incorporation of only a small amount of GO (1 wt%) in ion gel, there has been a dramatic improvement in ionic conductivity of about 260% compared with that of pure ion gel. In addition, the all‐solid‐state supercapacitor is fabricated and measured at room temperature using the GO‐doped ion gel as gel polymer electrolyte, which demonstrates more superior electrochemical performance than the all‐solid‐state supercapacitor with pure ion gel and the conventional supercapacitor with neat EMIMBF₄, in the aspect of smaller internal resistance, higher capacitance performance, and better cycle stability. These excellent performances are due to the high ionic conductivity, excellent compatibility with carbon electrodes, and long‐term stability of the GO‐doped ion gel.     

A Continuous Carbon Nitride Polyhedron Assembly for High‐Performance Flexible Supercapacitors

Flexible supercapacitors with high power density, flexibility, and durability have shown enormous potential for smart electronics. Here, a continuous graphitic carbon nitride polyhedron assembly for flexible supercapacitor that is prepared by pyrolysis of carbon nanotubes wired zeolitic imidazolate framework‐8 (ZIF‐8) composites under nitrogen is reported. It exhibits a high specific capacitance of 426 F g^?1 at current density of 1 A g^?1 in 1 m H₂SO₄ and excellent stability over 10 000 cycles. The remarkable performance results from the continuous hierarchical structure with average pore size of 2.5 nm, high nitrogen‐doping level (17.82%), and large specific surface area (920 m² g^?1). Furthermore, a flexible supercapacitor is developed by constructing the assembly with interpenetrating polymer network electrolyte. Stemming from the synergistic effect of high‐performance electrode and highly ion‐conductive electrolyte, superior energy density of 59.40 Wh kg^?1 at 1 A g^?1 is achieved. The device maintains a stable energy supply under cyclic deformations, showing wide application in flexible and even wearable conditions. The work paves a new way for designing pliable electrode with excellent electronic and mechanic property for long‐lived flexible energy storage devices.     

All‐Purpose Electrode Design of Flexible Conductive Scaffold toward High‐Performance Li–S Batteries

The main obstacles that hinder the development of efficient lithium sulfur (Li–S) batteries are the polysulfide shuttling effect in sulfur cathode and the uncontrollable growth of dendritic Li in the anode. An all‐purpose flexible electrode that can be used both in sulfur cathode and Li metal anode is reported, and its application in wearable and portable storage electronic devices is demonstrated. The flexible electrode consists of a bimetallic CoNi nanoparticle‐embedded porous conductive scaffold with multiple Co/Ni‐N active sites (CoNi@PNCFs). Both experimental and theoretical analysis show that, when used as the cathode, the CoNi and Co/Ni‐N active sites implanted on the porous CoNi@PNCFs significantly promote chemical immobilization toward soluble lithium polysulfides and their rapid conversion into insoluble Li₂S, and therefore effectively mitigates the polysulfide shuttling effect. Additionally, a 3D matrix constructed with porous carbonous skeleton and multiple active centers successfully induces homogenous Li growth, realizing a dendrite‐free Li metal anode. A Li–S battery assembled with S/CoNi@PNCFs cathode and Li/CoNi@PNCFs anode exhibits a high reversible specific capacity of 785 mAh g^?1 and long cycle performance at 5 C (capacity fading rate of 0.016% over 1500 cycles).