Molecular‐Scale Hybridization of Clay Monolayers and Conducting Polymer for Thin‐Film Supercapacitors

Development of electrode materials with well‐defined architectures is a fruitful and profitable approach for achieving highly‐efficient energy storage systems. A molecular‐scale hybrid system is presented based on the self‐assembly of CoNi‐layered double hydroxide (CoNi‐LDH) monolayers and the conducting polymer (poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate), denoted as PEDOT:PSS) into an alternating‐layer superlattice. Owing to the homogeneous interface and intimate interaction, the resulting CoNi‐LDH/PEDOT:PSS hybrid materials possess a simultaneous enhancement in ion and charge‐carrier transport and exhibit improved capacitive properties with a high specific capacitance (960 F g^–1 at 2 A g^–1) and excellent rate capability (83.7% retention at 30 A g^–1). In addition, an in‐plane supercapacitor device with an interdigital design is fabricated based on a CoNi‐LDH/PEDOT:PSS thin film, delivering a significantly enhanced energy and power output (an energy density of 46.1 Wh kg^–1 at 11.9 kW kg^–1). Its application in miniaturized devices is further demonstrated by successfully driving a photodetector. These characteristics demonstrate that the molecular‐scale assembly of LDH monolayers and the conducting polymer is promising for energy storage and conversion applications in miniaturized electronics.     

Indium zinc oxide ohmic contact to poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) induced by UV light

In this research, we investigated the I–V characteristics of ITO/PEDOT:PSS/InZnO devices for two sets of samples. The first set is composed of PEDOT:PSS as-prepared, while the second set is composed of PEDOT:PSS irradiated by UV light source. We found that UV irradiation improves the electrical conductivity of the fabricated devices and yields to ohmic contact. Based on the UPS measurements, it was found that UV irradiation leads to an increase in the work function and the enhancement of electrical conductivity of PEDOT:PSS films. XPS and AFM measurements indicate that conformational changes of the PEDOT:PSS films are responsible for this behavior. We also studied the effect of storage on the electrical properties of our devices. No significant changes of electrical characteristics have been found after storing the devices for a period of 30 days.     

Directional dependence of electron blocking in PEDOT:PSS

The directional dependence of electron blocking by poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated in organic photovoltaic devices. In a conventional OPV architecture we find that a doped interlayer forms between poly(3-hexylthiophene) (P3HT) and the PSS-rich top layer of spin-coated PEDOT:PSS films. In an inverted OPV architecture, we find no mixing between PEDOT:PSS and P3HT, which is due to the lower concentration of PSS in bulk PEDOT:PSS than is found in the PSS-rich top layer. Through electrical measurements of conventional and inverted photovoltaic devices we show that the interlayer is necessary for PEDOT:PSS to be electron blocking. This result implies that PEDOT:PSS is not intrinsically electron blocking and that its directional anisotropy must be considered when comparing the advantages and disadvantages of conventional and inverted architecture photovoltaic devices.     

Mitigating Detrimental Effect of Self-Doping Near the Anode in Highly Efficient Organic Solar Cells

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS⁻ ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL-active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS⁻ ions can also result in local p-doping in the high efficiency donor:non-fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two-component hole transport layer (HTL) consisting of a self-assembled monolayer of 2PACz ([2-(9H-Carbazol-9-yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two-component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p-doped PSS⁻ ion rich region (≈5–10 nm) at the bulk heterojunction-HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm² cells.     

Improved lifetimes of organic solar cells with solution‐processed molybdenum oxide anode‐modifying layers

We report on the use and stability of solution‐processed molybdenum oxide (sMoO_x) thin films as anode‐modifying layers to replace conventionally used poly(3,4‐ethyldioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) layers in poly(3‐hexylthiophene):[6,6]‐phenyl C₆₁ butyric acid methyl ester (P3HT/PC₆₁BM) bulk heterojunction organic solar cells. Our results show that while as prepared devices using the two anode‐modifying layers possess similar performances, the sMoO_x devices exhibit a staggering 20‐fold stability improvement in its performance half‐life compared with PEDOT/PSS devices, ~3400 h versus ~150 h, respectively. A further comparison of the stability between encapsulated and unencapsulated devices demonstrates the necessity for protection from atmospheric moisture and oxygen but again highlights the lucrative nature of sMoO_x as a protective anode‐modifying layer compared with PEDOT/PSS even under ambient conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Flexible Transparent Bifunctional Capacitive Sensors with Superior Areal Capacitance and Sensing Capability based on PEDOT:PSS/MXene/Ag Grid Hybrid Electrodes

Flexible transparent supercapacitors (FTSs) have aroused considerable attention. Nonetheless, balancing energy storage capability and transparency remains challenging. Herein, a new type of FTSs with both excellent energy storage and superior transparency is developed based on PEDOT:PSS/MXene/Ag grid ternary hybrid electrodes. The hybrid electrodes can synergistically utilize the high optoelectronic properties of Ag grids, the excellent capacitive performance of MXenes, and the superior chemical stability of PEDOT:PSS, thus, simultaneously demonstrating excellent optoelectronic properties (T: ≈89%, R_s: ≈39 Ω sq⁻¹), high areal specific capacitance, superior mechanical softness, and excellent anti-oxidation capability. Due to the excellent comprehensive performances of the hybrid electrodes, the resulting FTSs exhibit both high optical transparency (≈71% and ≈60%) and large areal specific capacitance (≈3.7 and ≈12 mF cm⁻²) besides superior energy storage capacity (P: 200.93, E: 0.24 µWh cm⁻²). Notably, the FTSs show not only excellent energy storage but also exceptional sensing capability, viable for human activity recognition. This is the first time to achieve FTSs that combine high transparency, excellent energy storage and good sensing all-in-one, which make them stand out from conventional flexible supercapacitors and promising for next-generation smart flexible energy storage devices.     

Effect of Hydrogen Bonding on a Value of an Open Circuit Potential of Poly-(3,4-ethylenedioxythiophene) as a Beneficial Mode for Energy Storage Devices

Poly(3,4-ethylenedioxythiophene) is one of the semiconducting polymers that has attracted attention as electroactive materials for many different applications such as electrochromic devices, light-emitting diodes, biosensors, and supercapacitors. The fundamental understanding of the origin of its energy storage ability will lead to the proper design of such devices. Generally, the charge storage in supercapacitors is due to the formation of an electrical double layer and/or redox reactions. Recently, it is shown that the formation of cation radicals in PEDOT is induced by the hydrogen-bond formation between formic acid and polymer during electrochemical polymerization. The induced cation radicals play a major role in the charge storage ability of PEDOT, as studied in the current work. Furthermore, the presence of hydrogen bonds in PEDOT leads to the stable in time open circuit potential of 900 mV. This new knowledge leads to the designing of a symmetrical supercapacitor based on PEDOT as active material where hydrogen-bonds play a crucial role in the improved performance of the device.     

High‐Performance Ultrathin Flexible Solid‐State Supercapacitors Based on Solution Processable Mo1.33C MXene and PEDOT:PSS

MXenes, a young family of 2D transition metal carbides/nitrides, show great potential in electrochemical energy storage applications. Herein, a high performance ultrathin flexible solid‐state supercapacitor is demonstrated based on a Mo_1.33C MXene with vacancy ordering in an aligned layer structure MXene/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) composite film posttreated with concentrated H₂SO₄. The flexible solid‐state supercapacitor delivers a maximum capacitance of 568 F cm^?3, an ultrahigh energy density of 33.2 mWh cm^?3 and a power density of 19 470 mW cm^?3. The Mo_1.33C MXene/PEDOT:PSS composite film shows a reduction in resistance upon H₂SO₄ treatment, a higher capacitance (1310 F cm^?3) and improved rate capabilities than both pristine Mo_1.33C MXene and the nontreated Mo_1.33C/PEDOT:PSS composite films. The enhanced capacitance and stability are attributed to the synergistic effect of increased interlayer spacing between Mo_1.33C MXene layers due to insertion of conductive PEDOT, and surface redox processes of the PEDOT and the MXene.     

Interface Molecular Engineering for Laminated Monolithic Perovskite/Silicon Tandem Solar Cells with 80.4% Fill Factor

A multipurpose interconnection layer based on poly(3,4‐ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS), and d ‐sorbitol for monolithic perovskite/silicon tandem solar cells is introduced. The interconnection of independently processed silicon and perovskite subcells is a simple add‐on lamination step, alleviating common fabrication complexities of tandem devices. It is demonstrated experimentally and theoretically that PEDOT:PSS is an ideal building block for manipulating the mechanical and electrical functionality of the charge recombination layer by controlling the microstructure on the nano‐ and mesoscale. It is elucidated that the optimal functionality of the recombination layer relies on a gradient in the d ‐sorbitol dopant distribution that modulates the orientation of PEDOT across the PEDOT:PSS film. Using this modified PEDOT:PSS composite, a monolithic two‐terminal perovskite/silicon tandem solar cell with a steady‐state efficiency of 21.0%, a fill factor of 80.4%, and negligible open circuit voltage losses compared to single‐junction devices is shown. The versatility of this approach is further validated by presenting a laminated two‐terminal monolithic perovskite/organic tandem solar cell with 11.7% power conversion efficiency. It is envisioned that this lamination concept can be applied for the pairing of multiple photovoltaic and other thin film technologies, creating a universal platform that facilitates mass production of tandem devices with high efficiency.     

Anode Interfacial Tuning via Electron‐Blocking/Hole‐Transport Layers and Indium Tin Oxide Surface Treatment in Bulk‐Heterojunction Organic Photovoltaic Cells

The effects of anode/active layer interface modification in bulk‐heterojunction organic photovoltaic (OPV) cells is investigated using poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and/or a hole‐transporting/electron‐blocking blend of 4,4′‐bis[(p‐trichlorosilylpropylphenyl)‐phenylamino]biphenyl (TPDSi₂) and poly[9,9‐dioctylfluorene‐co‐N‐[4‐(3‐methylpropyl)]‐diphenylamine] (TFB) as interfacial layers (IFLs). Current–voltage data in the dark and AM1.5G light show that the TPDSi₂:TFB IFL yields MDMO‐PPV:PCBM OPVs with substantially increased open‐circuit voltage (V_oc), power conversion efficiency, and thermal stability versus devices having no IFL or PEDOT:PSS. Using PEDOT:PSS and TPDSi₂:TFB together in the same cell greatly reduces dark current and produces the highest V_oc (0.91 V) by combining the electron‐blocking effects of both layers. ITO anode pre‐treatment was investigated by X‐ray photoelectron spectroscopy to understand why oxygen plasma, UV ozone, and solvent cleaning markedly affect cell response in combination with each IFL. O₂ plasma and UV ozone treatment most effectively clean the ITO surface and are found most effective in preparing the surface for PEDOT:PSS deposition; UV ozone produces optimum solar cells with the TPDSi₂:TFB IFL. Solvent cleaning leaves significant residual carbon contamination on the ITO and is best followed by O₂ plasma or UV ozone treatment.     

Over 16.7% Efficiency Organic‐Silicon Heterojunction Solar Cells with Solution‐Processed Dopant‐Free Contacts for Both Polarities

Realization of synchronous improvement in optical management and electrical engineering is necessary to achieve high‐performance photovoltaic device. However, inherent challenges are faced in organic‐silicon heterojunction solar cells (HSCs) due to the poor contact property of polymer on structured silicon surface. Herein, a remarkable efficiency boost from 12.6% to over 16.7% in poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/n‐silicon (PEDOT:PSS/n‐Si) HSCs by independent optimization of hole‐/electron‐selective contacts only relying on solution‐based processes is realized. A bilayer PEDOT:PSS film with different functionalizations is utilized to synchronously realize conformal contact and effective carrier collection on textured Si surface, making the photogenerated carriers be well separated at heterojunction interface. Meanwhile, fullerene derivative is used as electron‐transporting layer at the rear n‐Si/Al interface to reduce the contact barrier. The study of carriers' transport and independent optimization on separately contacted layers may lead to an effective and simplified path to fabricate high‐performance organic‐silicon heterojunction devices.     

High efficiency arrays of polymer solar cells fabricated by spray‐coating in air

We present bulk heterojunction organic solar cells fabricated by spray‐casting both the PEDOT:PSS hole‐transport layer (HTL) and active PBDTTT‐EFT:PC₇₁BM layers in air. Devices were fabricated in a (6 × 6) array across a large‐area substrate (25 cm²) with each pixel having an active area of 6.45 mm². We show that the film uniformity and operational homogeneity of the devices are excellent. The champion device with spray cast active layer on spin cast PEDOT:PSS had an power conversion efficiency (PCE) of 8.75%, and the best device with spray cast active layer and PEDOT:PSS had a PCE of 8.06%. The impacts of air and light exposure of the active layer on device performance are investigated and found to be detrimental. Copyright © 2015 John Wiley & Sons, Ltd.     

High‐Performance Metal‐Free Solar Cells Using Stamp Transfer Printed Vapor Phase Polymerized Poly(3,4‐Ethylenedioxythiophene) Top Anodes

The use of vapor phase polymerized poly(3,4‐ethylenedioxythiophene) (VPP‐PEDOT) as a metal‐replacement top anode for inverted solar cells is reported. Devices with both i) standard bulk heterojunction blends of poly(3‐hexylthiophene) (P3HT) donor and 1‐(3‐methoxycarbonyl)‐propyl‐1‐phenyl‐(6,6)C₆₀ (PCBM) soluble fullerene acceptor and ii) hybrid inorganic/organic TiO₂/P3HT acceptor/donor active layers are studied. Stamp transfer printing methods are used to deposit both the VPP‐PEDOT top anode and a work function enhancing PEDOT:polystyrenesulphonate (PEDOT:PSS) interlayer. The metal‐free devices perform comparably to conventional devices with an evaporated metal top anode, yielding power conversion efficiencies of 3% for bulk heterojunction blend and 0.6% for organic/inorganic hybrid structures. These encouraging results suggest that stamp transfer printed VPP‐PEDOT provides a useful addition to the electrode materials tool‐box available for low temperature and non‐vacuum solar cell fabrication.     

A Simple Cu(II) Polyelectrolyte as a Method to Increase the Work Function of Electrodes and Form Effective p-Type Contacts in Perovskite Solar Cells

One effective strategy to improve the performance of perovskite solar cells (PSCs) is to develop new hole transport layers (HTLs). In this work, a simple polyelectrolyte HTL, copper (II) poly(styrene sulfonate) (Cu:PSS), which comprises easily reduced Cu²⁺ counter-ions with an anionic PSS polyelectrolyte backbone is investigated. Photoelectron spectroscopy reveals an increase in the work function of the anode and upward band bending effect upon incorporation of Cu:PSS in PSC devices. Cu:PSS shows a synergistic effect when mixed with polyethylenedioxythiophene: polystyrenesulfonate (PEDOT:PSS) in various proportions and results in a decrease in the acidity of PEDOT:PSS as well as reduced hysteresis in completed devices. Cu:PSS functions effectively as a HTL in PSCs, with device parameters comparable to PEDOT:PSS, while mixtures of Cu:PSS with PEDOT:PSS shows greatly improved performance compared to PEDOT:PSS alone. Optimized devices incorporating Cu:PSS/PEDOT:PSS mixtures show an improvement in efficiency from 14.35 to 19.44% using a simple CH₃NH₃PbI₃ active layer in an inverted (P-I-N) geometry, which is one of the highest values yet reported for this type of device. It is expected that this type of HTL can be employed to create p-type contacts and improve performance in other types of semiconducting devices as well.     

Achieving High Efficiency and Improved Stability in ITO‐Free Transparent Organic Light‐Emitting Diodes with Conductive Polymer Electrodes

Efficient transparent organic light‐emitting diodes (OLEDs) with improved stability based on conductive, transparent poly(3,4‐ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) electrodes are reported. Based on optical simulations, the device structures are carefully optimized by tuning the thickness of doped transport layers and electrodes. As a result, the performance of PEDOT:PSS‐based OLEDs reaches that of indium tin oxide (ITO)‐based reference devices. The efficiency and the long‐term stability of PEDOT:PSS‐based OLEDs are significantly improved. The structure engineering demonstrated in this study greatly enhances the overall performances of ITO‐free transparent OLEDs in terms of efficiency, lifetime, and transmittance. These results indicate that PEDOT:PSS‐based OLEDs have a promising future for practical applications in low‐cost and flexible device manufacturing.     

Near‐Infrared Absorbing Polymeric Nanoparticles as a Versatile Drug Carrier for Cancer Combination Therapy

Poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS) nanoparticles, after being coated with polyethylene glycol (PEG), are used as a drug carrier to load various types of aromatic therapeutic molecules, including chemotherapy drugs doxorubicin (DOX) and SN38, as well as a photodynamic agent chlorin e6 (Ce6), through π–π stacking and hydrophobic interaction. Interesting functionalities of PEDOT:PSS‐PEG as an unique versatile drug delivery platform are discovered. Firstly, for water‐insoluble drugs such as SN38, the loading on PEDOT:PSS‐PEG dramatically enhances its water solubility, while maintaining its cytotoxicity to cancer cells. Secondly, the delivery of Ce6 by PEDOT:PSS‐PEG is able to remarkably accelerate the cellular uptake of Ce6 molecules, and thus offers improved photodynamic therapeutic efficacy. Using DOX‐loaded PEDOT:PSS‐PEG as the model system, it is demonstrated that the photothermal effect of PEDOT:PSS‐PEG can be utilized to promote the delivery of this chemotherapeutic agent, achieving a combined photothermal‐ and chemotherapy with an obvious synergistic cancer killing effect. Moreover, it is also shown that multiple types of therapeutic agents could be simultaneously loaded on PEDOT:PSS‐PEG nanoparticles and delivered into cancer cells. This work highlights the great potential of NIR‐absorbing polymeric nanoparticles as multifunctional drug carriers for potential cancer combination therapy with high efficacy.     

Interface Modification to Improve Hole‐Injection Properties in Organic Electronic Devices

The performance of organic electronic devices is often limited by injection. In this paper, improvement of hole injection in organic electronic devices by conditioning of the interface between the hole‐conducting layer (buffer layer) and the active organic semiconductor layer is demonstrated. The conditioning is performed by spin‐coating poly(9,9‐dioctyl‐fluorene‐co‐N‐ (4‐butylphenyl)‐diphenylamine) (TFB) on top of the poly(3,4‐ethylene dioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) buffer layer, followed by an organic solvent wash, which results in a TFB residue on the surface of the PEDOT:PSS. Changes in the hole‐injection energy barriers, bulk charge‐transport properties, and current–voltage characteristics observed in a representative PFO‐based (PFO: poly(9,9‐dioctylfluorene)) diode suggest that conditioning of PEDOT:PSS surface with TFB creates a stepped electronic profile that dramatically improves the hole‐injection properties of organic electronic devices.     

Formation of Nanoislands on Conducting Poly(3,4‐ethylenedioxythiophene) Films by High‐Energy‐Ion Irradiation: Applications as Field Emitters and Capacitor Electrodes

Nanoislands have been fabricated on the surface of conducting poly(3,4‐ethylenedioxythiophene) (PEDOT) films doped with poly(4‐styrenesulfonate) (PSS) using high‐energy (≈ 1–3 MeV) Cl²⁺ ion irradiation. Scanning electron microscopy and atomic force microscopy confirm the direct formation of nanoislands with diameters ranging from 50 to 300 nm and heights ranging from 40 to 120 nm. From our analysis, we propose that the formation of nanoislands might be due to micelle formation of the polymeric stabilizer poly(sodium 4‐styrenesulfonate) (PSS‐Na) surrounding the nuclei in the PEDOT/PSS via the high‐energy‐ion irradiation. We observe similar results for high‐energy‐ion irradiated polyaniline doped with PSS‐Na. On using the nanoislands as nanotip emitters of a field‐emission display, an increase in the current density of about five orders of magnitude is observed. Cyclic voltammetry of the PEDOT/PSS electrode with the nanoislands as the electrode shows enhanced capacitance compared with that of the PEDOT/PSS film that contains no nanostructure.     

Effect of the Ionic Conductivity on the Performance of Polyelectrolyte‐Based Supercapacitors

In the emerging technology field of printed electronics, circuits are envisioned to be powered with printed energy sources, such as printed batteries and printed supercapacitors (SCs). For manufacturing and reliability issues, solid electrolytes are preferred instead of liquid electrolytes. Here, a solid‐state, polyanionic proton conducting electrolyte, poly(styrenesulfonic acid) (PSS:H), is demonstrated for the first time as an effective ion conducting electrolyte medium in SCs with electrodes based on carbon nanotube (CNT) networks. The effect of the ionic conductivity in the PSS:H film of those SCs is studied at different levels of relative humidity (RH) with impedance spectroscopy, cyclic voltammetry, and galvanostatic charge‐discharge techniques. High capacitance values (85 F g^?1 at 80% RH) are obtained for these SCs due to the extremely high effective electrode area of the CNTs and the enhanced ionic conductivity of the PSS:H film at increasing RH level. The charging dynamics are primarily limited by the ionic conductivity of the electrolyte rather than a poor contact between the electrolyte and the CNT electrodes. The use of polyelectrolytes in SCs provides high mechanical strength and flexibility, while maintaining a high capacitance value, enabling a new generation of printable solid‐state charge storage devices.