基于仿人体血管路径WSN故障容错路由算法研究

为提高无线传感器网络(WSN)故障容错性和传输稳定性,实现网络负载均衡,提出了一种仿人体血管路径的WSN故障容错路由算法.通过研究人体血管路径特性,将其引入到WSN故障容错路由设计中,在对网络节点分区域进行等级标定的基础上实行能耗均衡的静态分簇;运用改进的蚁群算法生成节点路径并计算各路径信息素值,以确定传输路径选择概率并建立仿血管拓扑结构路由.理论与仿真结果表明,此算法具有良好的性能.     

一种WSN中分簇路由算法的改进

在无线传感器网络中,基于分簇的路由协议对提高网络的寿命有着重要作用,LEACH是一种应用比较广泛的层次路由协议。本文提出一种新的基于最优分簇的无线传感器网络分簇路由（LEACH-O）算法,在簇的形成过程考虑到节点的集中程度和节点的剩余能量,从而减少传感器节点的能量消耗,优化资源利用率。仿真实表明,与传统的LEACH算法相比,该算法配传感器节点间数据传输提供了高效路由,从而延长网络的生命周期。     

一种节能和时延保证的无线传感器QoS路由算法

无线传感器网络中实时数据（如视频、语音、图像）的传输对时延和抖动比较敏感,文章在充分考虑无线传感器节点能量受限的基础上,针对实时业务对时延的要求提出一种路由算法,该算法在路径创建和维护的过程中考虑时延和节点剩余能量来选择下一跳节点,在路由更新阶段对失效的节点进行标记,能够简化重新建立有效路由的步骤,从而减少路由建立时间,保证了传输的可靠性。仿真结果表明该路由算法既延长了无线传感器网络的生命周期,又能更好地满足实时数据的传输。     

无线传感器网络动态分簇路由BWAS的算法研究

为加快无线传感器网络(WSN)路径搜索速度,减少了路径寻优能量消耗,提出了基于最优-最差蚂蚁系统(BWAS)算法的无线传感器网络动态分簇路由算法。该算法是基于WSN动态分簇能量管理模式,在簇头节点间运用BWAS算法搜寻从簇头节点到汇聚节点的多跳最优路径,以多跳接力方式将数据发送至汇聚节点。BWAS算法在路径搜寻过程中评价出最优-最差蚂蚁,引入奖惩机制,加强搜寻过程的指导性。结合动态分簇能量管理,避免网络连续过度使用某个节点,均衡了网络节点能量消耗。通过与基于蚁群算法(ACS)路由算法仿真比较,本算法减缓了网络节点的能量消耗,延长了网络寿命,在相同时间里具有较少的死亡节点,具有较强的鲁棒性。     

基于BWAS的无线传感器网络静态分簇路由算法

为提高路径搜索效率,避免动态分簇较多的能量消耗,提出了基于最优-最差蚂蚁系统(BWAS)的无线传感器网络静态分簇路由算法.BWAS是对蚁群算法的改进,在路径搜寻过程中评价出最优最差蚂蚁,引入奖惩机制,加快了路径搜索速度.通过无线传感器网络静态分簇、簇内动态选举簇头,在簇头节点间运用BWAS算法搜寻从簇头节点到汇聚节点的多跳最优路径,能减少路径寻优能量消耗,实现均衡能量管理,延长网络寿命,且具有较强的鲁棒性.通过与基于BWAS的动态分簇和基于蚁群算法的动态分簇路由的仿真实验相比较,证实了本算法的有效性.     

k跳受限泛洪的能量平衡组播路由算法

组播路由算法(Energy-Balanced Multicast Routing,EBMR)把无线传感器网络节点的剩余能量作为建立组播路由的重要因子,在不引入过长路径的同时优先选择剩余能量高的节点作为组播数据转发节点,构建组播能量平衡树(EB-Tree),从网络能量均衡消耗的角度来延长了无线传感器网络的生存时间.针对EBMR算法路由开销较大的问题,提出了k跳受限泛洪的能量平衡组播路由算法k-EBMR,控制组播路由报文在k跳范围内传播,并且研究了影响算法性能的关键因子的选取.仿真实验表明,与EBMR算法相比,k-EBMR算法较大程度上降低了路由控制报文的传输,提高了节点能量有效使用性,进一步延长了网络生存时间.     

基于簇结构的无线传感器网络路由研究综述

介绍了典型分簇无线传感器网络路由协议的分类,总结了分簇路由协议的研究进展。针对无线传感器网络从同构型网络向异构型网络发展的趋势和特点,指出了路由协议向节点间相互协作的发展方向,并且在设计路由协作算法时可采用与无线传感器网络极为相似的多Agent系统模型。     

无线传感器网络中一种基于能量策略的路由算法

介绍了无线传感器网络(Wireless Sensor Network, WSN)的概念和特点,在此基础上针对无线传感器网络的特点提出了一种能量效率高和能量消耗平衡的路由新算法:最小能耗路由和节点能量最大路由周期轮转。给出了在WSN中多点对一点通信的最小能耗路径和节点能量最大路径的矩阵算法。     

基于遗传聚类的无线传感器负载均衡路由算法

通常的无线传感器分簇网络存在节点负载不均衡的问题。为均衡各节点能量消耗,延长网络生存周期,将K均值算法与遗传算法相结合,提出一种负载均衡的无线传感器网络路由算法,算法利用遗传算法的全局寻优能力以克服传统K均值算法的局部性和对初始中心的敏感性,实现了传感器网络节点自适应成簇与各节点负载均衡。仿真实验表明,该算法显著延长了网络寿命,相对于其他分簇路由算法,其网络生存时间延长了约43%。     

基于遗传聚类的无线传感器负载均衡路由算法

通常的无线传感器分簇网络存在节点负载不均衡的问题。为均衡各节点能量消耗,延长网络生存周期,将K均值算法与遗传算法相结合,提出一种负载均衡的无线传感器网络路由算法,算法利用遗传算法的全局寻优能力以克服传统K均值算法的局部性和对初始中心的敏感性,实现了传感器网络节点自适应成簇与各节点负载均衡。仿真实验表明,该算法显著延长了网络寿命,相对于其他分簇路由算法,其网络生存时间延长了约43%。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks