BaFe<Subscript>12</Subscript>O<Subscript>19</Subscript> films produced from BaFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> heterostructures

BaFe₁₂O₁₉ hexaferrite films have been produced on thermally oxidized single-crystal silicon (SiO₂/Si) substrates by sequential ion-beam sputtering of BaFe₂O₄ and α-Fe₂O₃ targets in an argon-oxygen atmosphere. Their crystal structure has been studied, and the origin of the impurity phases forming during heat treatment has been identified. The results show that heat treatment may lead to the formation of eutectic melts. As a result, the hexaferrite films may contain spherulites.     

Kinetics of Thermal Transformation of Mg<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript> · 8H<Subscript>2</Subscript>O to Mg<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

The kinetics of thermal dehydration of Mg₃(PO₄)₂ · 8H₂O was investigated using thermogravimetry at four different heating rates. The activation energies of the dehydration step of Mg₃(PO₄)₂ · 8H₂O were calculated through the isoconversional Ozawa and Kissinger-Akahira-Sunose (KAS) methods and iterative methods, which were found to be consistent and indicate a single mechanism. The possible conversion function of the dehydration reaction for Mg₃(PO₄)₂ · 8H₂O has been estimated through the Coats and Redfern integral equation, and a better kinetic model such as random nucleation of the “Avrami–Erofeev equation (A _3/2 model)” was found. The thermodynamic functions (ΔH*, ΔG*, and ΔS*) of the dehydration reaction are calculated by the activated complex theory and indicate that it is a non-spontaneous process when the introduction of heat is not connected.     

Variable—Range hopping in Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> glasses

The dc conductivity of the glasses in the Fe₂O₃-Bi₂O₃-K₂B₄O₇ system was studied at temperatures between 223 and 393 K. At temperatures from 300 to 223 K, T^–1/4 (T is temperature) dependence of the conductivity was found, however, both Mott variable-range hopping and Greaves intermediate range hopping models are found to be applicable. Mott and Greaves parameters analysis gave the density of states at Fermi level N (E_F) = 3.13 × 10²⁰–21.01 × 10²⁰ and 1.93 × 10²¹–16.39 × 10²¹ cm^–3eV^–1 at 240 K, respectively. The variable-range hopping conduction occurred in the temperature range T = 300–223 K, since W_D was found to be large (W_D = 0.08–0.14 eV for these glasses) and dominated the conduction at T < 300 K.     

Phase relations in the K<Subscript>2</Subscript>MoO<Subscript>4</Subscript>–Ln<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript>–Zr(MoO<Subscript>4</Subscript>)<Subscript>2</Subscript> (Ln = La–Lu,Y) systems

We have studied phase relations in the K₂MoO₄–Ln₂(MoO₄)₃–Zr(MoO₄)₂ (Ln = La–Lu, Y) systems by the method of “intersecting cuts,” identified pseudobinary joins in their composition triangles, and constructed their phase compatibility diagrams. The systems have been shown to contain new ternary molybdates with the general formula K₅LnZr(MoO₄)₆ (Ln = Dy–Lu and Y). The thermal characteristics of the synthesized compounds have been studied by differential scanning calorimetry in the temperature range 25–700°C. The new ternary molybdates crystallize in a trigonal structure (sp. gr. R\(\bar 3\)c, Z = 6).     

Crystal structure of a Np(V) sesquioxalate,Na<Subscript>4</Subscript>(NpO<Subscript>2</Subscript>)<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>·2H<Subscript>2</Subscript>O

The crystal structure of a previously unknown Np(V) sesquioxalate, Na₄(NpO₂)₂(C₂O₄)₃·2H₂O was studied. The crystal structure consists of neptunyl(V) cations, sodium cations, oxalate anions, and water molecules of crystallization. Neptunyl(V) cations and oxalate ions form anionic chains [(NpO₂)₂(C₂O₄)₃] _n ^4n? . The coordination polyhedron (CP) of Np (pentagonal bipyramid) contains two apical “yl” oxygen atoms and five equatorial O atoms of three oxalate ions. The CP of Na(1) and Na(2) cations are combined through the common edges into zigzag chains in the [010] direction. Two independent oxalate ions are tridentate and tetradentate ligands.     

Enhanced microwave dielectric properties of Ba<Subscript>0.40</Subscript>Sr<Subscript>0.60</Subscript>TiO<Subscript>3</Subscript>–Zr<Subscript>0.80</Subscript>Sn<Subscript>0.20</Subscript>TiO<Subscript>4</Subscript> composite ceramics

The (1−x) Ba_0.40Sr_0.60TiO₃ (BST)−xZr_0.80Sn_0.20TiO₄ (ZST) composite ceramics with x = 10, 20, 30, and 40 wt% were fabricated by conventional solid-state reaction method. With increasing of ZST content, the dielectric constant of composite ceramics was decreased and dielectric loss increases. The effect of ZnO addition to 70 wt% BST–30 wt% ZST composition on the microstructure and dielectric properties was investigated. The improvements in dielectric constant, dielectric loss, and microwave dielectric properties of composite ceramics can be achieved by ZnO addition. The sample with 98 wt% (70 wt% BST–30 wt% ZST)–2 wt%ZnO composition exhibits promising dielectric properties, with dielectric constant, loss tangent and tunability at 4 kV/mm, of 125, 0.0016 and 12%, at 10 kHz and room temperature. At ~2 GHz, it possesses a dielectric constant of 101 and a Q factor of 187, which makes it a good candidate for tunable microwave device applications.     

CaGa<Subscript>2</Subscript>Se<Subscript>4</Subscript>–GaSe system

The phase relations in the CaGa₂S₄–GaSe system have been studied using differential thermal analysis, X-ray diffraction, microstructural analysis, microhardness tests, and density measurements, and its T–x phase diagram has been mapped out. The CaGa₂S₄–GaSe system has been shown to be a pseudobinary join of the ternary system Ca–Ga–Se. The CaGa₂S₄–GaSe system has been found to contain limited solid solutions based on the constituent selenides. The electrical conductivity of CaGa₂S₄ has been measured and its current–light behavior and photoelectric properties have been studied.     

Microwave dielectric properties of temperature-stable (Mg<Subscript>0.95</Subscript>Co<Subscript>0.05</Subscript>)<Subscript>2</Subscript>TiO<Subscript>4</Subscript>–Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> composite ceramics for LTCC applications

In this paper, the effects of Li₂O–B₂O₃–Bi₂O₃–SiO₂ (LBBS) glass on the phase formation, sintering characteristic, the microstructure and microwave dielectric properties of temperature-stable (Mg_0.95Co_0.05)₂TiO₄–Li₂TiO₃ ceramics were investigated. (Mg_0.95Co_0.05)₂TiO₄–Li₂TiO₃ powders were obtained by using the traditional solid-state process. A small amount of LBBS doping can effectively reduce sintering temperature and promote the densification of the ceramics. X-ray diffraction analysis revealed not only the primary phase (Mg·Co)₂TiO₄ associated with Li₂TiO₃ minor phase but also a third phase (Mg·Co)TiO₃. The dielectric constant and Qf values vary with the doping amount of LBBS and sintering temperatures. With the compensation of the positive temperature coefficient (τ _f ) of Li₂TiO₃ and the negative τ _f of (Mg_0.95Co_0.05)₂TiO₄, the τ _f of the specimens fluctuates around zero. The (Mg_0.95Co_0.05)₂TiO₄ ceramic with 2.5 wt% LBBS addition and sintering at 900?°C for 4 h exhibited excellent microwave dielectric properties: ? _r ?=?19.076, Qf?=?126100 GHz, and τ _f ?=?0.98 ppm/°C.     

Phase Equilibria in the Cu<Subscript>2</Subscript>Se–Cu<Subscript>3</Subscript>AsSe<Subscript>4</Subscript>–Se System and Thermodynamic Properties of Cu<Subscript>3</Subscript>AsSe<Subscript>4</Subscript>

The Cu₂Se–Cu₃AsSe₄–Se system has been studied using differential thermal analysis, X-ray diffraction, and emf measurements on concentration cells using Cu₄RbCl₃I₂ as a solid electrolyte. We have constructed a number of vertical sections through the phase diagram, the room-temperature solid-state phase compatibility diagram, and a projection of the liquidus surface. The primary crystallization fields of the phases present and the types and coordinates of in- and univariant equilibria in the system have been identified. The system has been shown to contain a broad liquid–liquid immiscibility region. Using emf data, we evaluated the standard thermodynamic functions of formation and standard entropy of the Cu₃AsSe₄ compound.     

Growth of bulk β-BaB<Subscript>2</Subscript>O<Subscript>4</Subscript> crystals of high optical quality in the BaB<Subscript>2</Subscript>O<Subscript>4</Subscript>-NaBaBO<Subscript>3</Subscript> system

Phase equilibria along the BaB₂O₄-NaBaBO₃ join of the BaO-B 2 O 3 -Na 2 O system are studied by differential thermal analysis and modified visual thermal analysis. The join is shown to be suitable for growing - BaB₂O₄ crystal of high optical quality.Translated from Neorganicheskie Materialy, Vol. 41, No. 1, 2005, pp. 64–69. Original Russian Text Copyright © 2005 by Kokh, Kononova, Fedorov, Bekker, Kuznetsov.     

New NTC thermistors based on LaCrO<Subscript>3</Subscript>–Mg(Al<Subscript>0.7</Subscript>Cr<Subscript>0.3</Subscript>)<Subscript>2</Subscript>O<Subscript>4</Subscript> composite ceramics

In this study, the xLaCrO₃–(1?x)Mg(Al_0.7Cr_0.3)₂O₄ (x?=?0.1, 0.2, 0.3, 0.4) negative temperature coefficient composite ceramics were fabricated through conventional solid state reaction at 1650?°C. X-ray diffraction analysis has revealed that the sintered ceramics are consisted of cubic spinel Mg(Al_0.7Cr_0.3)₂O₄ phase and orthorhombic perovskite LaCrO₃ phase. The obtained values of \({{\rho }_{\text{300}}}\) and \({{B}_{400/800}}\) and \({{E}_{\text{a}}}\) are in the range of 1.55?×?10²–1.41?×?10⁸ Ωcm, 756–11317 K, 0.065–0.976 eV, respectively. The electrical properties of these ceramics can be adjusted by the LaCrO₃ contents. Such ceramics could be suitable for high temperature NTC thermistor application.     

Growth and structure of Mg(Fe<Subscript>0.8</Subscript>Ga<Subscript>0.2</Subscript>)<Subscript>2</Subscript>O<Subscript>4 − δ</Subscript> films

Films 150–200 nm in thickness, with the nominal composition Mg(Fe_0.8Ga_0.2)₂O_{4 − δ} have been grown on (100) single-crystal silicon substrates by ion-beam sputtering in vacuum. The effect of growth and annealing conditions on the crystal structure and morphology of the films has been studied, and the thermal conditions for the growth of spinel-structure films have been optimized.     

Enhanced antibacterial performance of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>–Ag and MnFe<Subscript>2</Subscript>O<Subscript>4</Subscript>–Ag nanocomposites

In this work, we have described the antibacterial activities of Fe₃O₄ nanoparticles with different organic parts, including Humic acid (HA), Nicotinic acid (Nico) and Histidine (His), and the antibacterial activity of MnFe₂O₄ nanoparticles coated with PANI and SiO₂ against different bacteria and some standard antibacterial drugs. The present study revealed that the newly fabricated various Fe₃O₄ and MnFe₂O₄ nanocomposites, when combined with some different organic parts, are superiour antibacterial agents. Also, the synthesized nanocomposites can be easily separated from aqueous solution by magnetic filtration without any contamination of the medium.     

Chemical interaction of InAs,InSb, GaAs,and GaSb with (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>Cr<Subscript>2</Subscript>O<Subscript>7</Subscript>–HBr–C<Subscript>4</Subscript>H<Subscript>6</Subscript>O<Subscript>6</Subscript> etching solutions

This paper presents results on the kinetics and mechanism of the physicochemical interaction of InAs, InSb, GaAs, and GaSb semiconductor surfaces with (NH₄)₂Cr₂O₇–HBr–C₄H₆O₆ etching solutions under reproducible hydrodynamic conditions in the case of laminar etchant flow over a substrate. We have identified regions of polishing and nonpolishing solutions and evaluated the apparent activation energy of the process. The surface morphology of the crystals has been examined by microstructural analysis after chemical etching. The results demonstrate that the presence of C₄H₆O₆ in etchants helps to reduce the overall reaction rate and extend the region of polishing solutions.     

Stability of the LaCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> and LuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> Ions Studied by Mass Spectrometry

The enthalpy stability of the LaCl ₄ ^? and LuCl ₄ ^? ions is assessed using high-temperature mass spectrometry. The enthalpy of Cl^? detachment is determined to be Δ_rH⁰(298.15 K) = 332 ± 10 kJ/mol for LaCl ₄ ^? and 359 ± 10 kJ/mol for LuCl ₄ ^? .     

Reaction of CaAl<Subscript>4</Subscript>O<Subscript>7</Subscript> with (0001)-oriented α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Reactions between thin films of CA₂ and (0001)-oriented α-Al₂O₃ have been studied using a combination of microscopy techniques. Thin films of amorphous CA₂ were deposited on sapphire substrates by pulsed-laser deposition at 900 °C in an oxygen ambient atmosphere. After deposition, the reaction couples were heat treated in air for various times either at 1300 or 1400 °C. Atomic-force microscopy was used to monitor changes in the microstructure of the films. Interfaces between the different regions were examined by transmission electron microscopy (TEM) of cross-sectional samples prepared by focused ion-beam milling. The CA₂ films had dewetted the substrate surface as a result of the heat treatment. An interfacial reaction layer was observed between the dewetted CA₂ droplets and the substrate. The structure of this reaction layer was found to be consistent with γ-Al₂O₃ by computer analysis of high-resolution TEM images. There is a perfect epitaxy between the interfacial layer and the substrate. For the samples heat treated for longer times, hexagonal features were found on the substrate surface. The presence of these features on (0001)-oriented α-Al₂O₃ suggests that CA₆ platelets form by the transformation of the interfacial reaction layer. The results are discussed in relation to the crystallization behavior of the various calcium aluminate phases and the equilibrium-phase diagram of the CaO–Al₂O₃ system.     

Phase equilibria in the system “CaAl<Subscript>2</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript>”-Na<Subscript>2</Subscript>Al<Subscript>2</Subscript>Si<Subscript>3</Subscript>O<Subscript>10</Subscript>-H<Subscript>2</Subscript>O

The phase equilibria in the “CaAl₂Si₃O₁₀”-Na₂Al₂Si₃O₁₀-H₂O system are analyzed using structural and thermal analysis data, and the ideal gonnardite structure is modeled. The results suggest that, to ensure a better correlation with the structures of the zeolites in this series, a new structural model of the gonnardite-based solid solution must be selected, with the structure rotated through 45° about the c axis in the ab plane.     

Phase equilibria in the Tl<Subscript>5</Subscript>Te<Subscript>3</Subscript>–Tl<Subscript>9</Subscript>BiTe<Subscript>6</Subscript>–Tl<Subscript>9</Subscript>TbTe<Subscript>6</Subscript> system

Phase equilibria in the Tl₅Te₃–Tl₉BiTe₆–Tl₉TbTe₆ system have been studied using differential thermal analysis, X-ray diffraction, and microhardness measurements. We have mapped out a number of vertical sections, the 760-K isothermal section of its phase diagram, and projections of its liquidus and solidus surfaces. The composition dependences of lattice parameters and microhardness have been obtained. The system has been shown to contain a continuous series of solid solutions, which crystallize in a tetragonal structure (Tl₅Te₃ type, sp. gr. I4/mcm).     

Ca<Subscript>4</Subscript>La<Subscript>2</Subscript>Ti<Subscript>5</Subscript>O<Subscript>17</Subscript>: a novel low loss dielectric ceramics in the CaO–La<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2 </Subscript>system

A novel low loss dielectric material Ca₄La₂Ti₅O₁₇ was prepared by solid state ceramic route. The structure and microstructure of the Ca₄La₂Ti₅O₁₇ ceramics was investigated using XRD, SEM and EDX techniques. XRD result showed cubic perovskite like structure for Ca₄La₂Ti₅O₁₇ ceramics. The ceramics were sintered in the temperature range of 1,450–1575 °C. The microwave dielectric properties of the material were investigated using a network analyzer in the frequency range of 3–6 GHz. The variation in microwave dielectric properties of the Ca₄La₂Ti₅O₁₇ ceramics with sintering temperature was correlated with bulk density of the material. Ca₄La₂Ti₅O₁₇ has ε_r of 73, Q_uxf of 16,000 at 3.3 GHz, and τ_f of 127 ppm/°C at the optimized sintering temperature of 1,550 °C/4h.     

High- and low-temperature X-ray diffraction studies of aluminate spinels in the CoAl<Subscript>2</Subscript>O<Subscript>4</Subscript>–NiAl<Subscript>2</Subscript>O<Subscript>4</Subscript> system

Co _x Ni_1–x Al₂O₄ (x = 0, 0.25, 0.5, 0.75, 1) aluminate spinels have been prepared by solid-state reactions and their crystal structures have been refined by the Rietveld method. We have analyzed whether the results are consistent with theoretical relationships stemming from the hard sphere model. Using high- and low-temperature X-ray diffraction measurements, we have obtained the temperature dependences of the unit-cell parameters for the synthesized compounds and determined their thermal expansion coefficients. The rate of cation exchange reactions has been shown to be very slow at temperatures below 200°C.