Modified Interface Properties of Au/<Emphasis Type="Italic">n</Emphasis>-type GaN Schottky Junction with a High-<Emphasis Type="Italic">k</Emphasis> Ba<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>TiO<Subscript>3</Subscript> Insulating Layer

The interface properties of a Au/n-GaN Schottky junction (SJ) were modified by placing a high-k barium strontium titanate (Ba_0.6Sr_0.4TiO₃) insulating layer between the Au and n-GaN semiconductor. The surface morphology, chemical composition, and electrical properties of Au/Ba_0.6Sr_0.4TiO₃ (BST)/n-GaN metal/insulator/semiconductor (MIS) junctions were explored by atomic force microscopy, energy-dispersive x-ray spectroscopy, current–voltage (I–V) and capacitance–voltage (C–V) techniques. The electrical results of the MIS junction are correlated with the SJ and discussed further. The MIS junction exhibited an exquisite rectifying nature compared to the SJ. An average barrier height (BH) and ideality factors were extracted to be 0.77 eV, 1.62 eV and 0.92 eV, 1.95 for the SJ and MIS junction, respectively. The barrier was raised by 150 meV for the MIS junction compared to the MS junction, implying that the BH was effectively altered by the BST insulating layer. The BH values extracted by I–V, Cheung’s and Norde functions were nearly equal to one another, indicating that the techniques applied here were dependable and suitable. The frequency-dependent properties of the SJ and MIS junction were explored and discussed. It was found that the interface state density of the MIS junction was smaller than the SJ. This implies that the BST layer plays an imperative role in the decreased N_SS. Poole–Frenkel emission was the prevailed current conduction mechanism in the reverse-bias of both the SJ and MIS junction.     

SiO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> layer formation during plasma sputtering of Si and SiO<Subscript>2</Subscript> targets

Deposition of SiO _x layers of variable composition onto silicon wafers was performed by co-sputtering of spaced Si and SiO₂ targets in argon plasma. Coordinate dependences of the thickness and refractive index of separately deposited Si and SiO₂ layers and the SiO _x layer grown during co-sputtering of targets were determined using optical techniques. It was shown that the SiO _x layer composition is not equal to a simple sum of thicknesses of separately deposited Si and SiO₂ layers. The coordinate dependences of the Si and SiO₂ layer thicknesses were calculated. To fit the calculated and experimental data, it is necessary to assume that no less than 10% of silicon is converted to dioxide during co-sputtering. A comparison of the coordinate dependences of the IR absorbance in SiO₂ and SiO _x layers with experimental ellipsometric data confirmed the presence of excess oxygen in the SiO _x layer. Taking into account such partial oxidation of sputtered silicon, composition isolines in the substrate plane were calculated. After annealing of the SiO _x layer at 1200°C, photoluminescence was observed in a wafer area predicted by calculations, which was caused by the formation of quantum-size Si nanocrystallites. The photoluminescence intensity was maximum at x = 1.78 ± 0.3, which is close to the composition optimum for ion-beam synthesis of nanocrystals.     

Structural and Electrical Properties of Ag/<Emphasis Type="Italic">n</Emphasis>-TiO<Subscript>2</Subscript>/<Emphasis Type="Italic">p</Emphasis>-Si/Al Heterostructure Fabricated by Pulsed Laser Deposition Technique

We have investigated the structural and electrical characteristics of the Ag/n-TiO₂/p-Si/Al heterostructure. Thin films of pure TiO₂ were deposited on p-type silicon (100) by optimized pulsed laser ablation with a KrF-excimer laser in an oxygen-controlled environment. X-ray diffraction analysis showed the formation of crystalline TiO₂ film having a tetragonal texture with a strong (210) plane as the preferred direction. High purity aluminium and silver metals were deposited to obtain ohmic contacts on p-Si and n-TiO₂, respectively. The current–voltage (I–V) characteristics of the fabricated heterostructure were studied by using thermionic emission diffusion mechanism over the temperature range of 80–300 K. Parameters such as barrier height and ideality factor were derived from the measured I–V data of the heterostructure. The detailed analysis of I–V measurements revealed good rectifying behavior in the inhomogeneous Ag/n-TiO₂/p-Si(100)/Al heterostructure. The variations of barrier height and ideality factor with temperature and the non-linearity of the activation energy plot confirmed that barrier heights at the interface follow Gaussian distributions. The value of Richardson’s constant was found to be 6.73 × 10⁵ Am^?2 K^?2, which is of the order of the theoretical value 3.2 × 10⁵ Am^?2 K^?2. The capacitance–voltage (C–V) measurements of the heterostructure were investigated as a function of temperature. The frequency dependence (Mott–Schottky plot) of the C–V characteristics was also studied. These measurements indicate the occurrence of a built-in barrier and impurity concentration in TiO₂ film. The optical studies were also performed using a UV–Vis spectrophotometer. The optical band gap energy of TiO₂ films was found to be 3.60 eV.     

Amorphization of the surface region in epitaxial <Emphasis Type="Italic">n</Emphasis>-GaAs treated with atomic hydrogen

It was found that the atomic-hydrogen treatment of n-GaAs epitaxial samples having initially high-quality surfaces both with a SiO₂ protective film on the n-layer surface and without it can lead to the amorphization of these surfaces and a thin (≈7 nm) surface layer, which is accompanied by the formation of a hydride phase. The lack of a hydrogen sublattice in the near-surface layer can imply that the main driving forces in the amorphization of epitaxial n-GaAs are short-range chemical interactions between hydrogen atoms and also between hydrogen atoms and atoms of the basic matrix of the crystal.     

Role of Si-doped Al<Subscript>0.3</Subscript>Ga<Subscript>0.7</Subscript>As layers in the high-frequency conductivity of GaAs/Al<Subscript>0.3</Subscript>Ga<Subscript>0.7</Subscript>As heterostructures under conditions of the quantum hall effect

The complex high-frequency conductivity of GaAs/Al_0.3Ga_0.7As heterostructures that are δ-doped and modulation-doped with silicon was investigated by acoustic methods under conditions of the integer quantum Hall effect. Both the real (σ₁) and imaginary (σ₂) parts of the complex conductivity σ(ω, H)=σ_i?iσ₂ were determined from the dependences of the absorption and velocity of surface acoustic waves on magnetic field. It is shown that, in the heterostructures with electron density n_s=(1.3–7)×10¹¹ cm^?2 and mobility μ=(1–2)×10⁵ cm²/(V s), the high-frequency conductivity near the centers of the Hall plateau is due to electron hopping between localized states. It is established that, with filling numbers 2 and 4, the conductivity of the Al_0.3Ga_0.7As:Si layer efficiently shunts the high-frequency hopping conductivity of the two-dimensional interface layer. A method of separating the contributions of the interface and Al_0.3Ga_0.7As:Si layers to the hopping conductivity σ(ω, H) is developed. The localization length of electrons in the interface layer is determined on the basis of the nearest neighbor hopping model. It is shown that, near the centers of the Hall plateau, both σ(ω, H) and n_s depend on the cooling rate of a GaAs/Al_0.3Ga_0.7As sample. As a result, the sample “remembers” the cooling conditions. Infrared light and static strain also change both σ(ω, H) and n_s. We attribute this behavior to the presence of two-electron defects (so-called DX^? centers) in the Al_0.3Ga_0.7As:Si layer.     

The qualitative difference between mechanisms of electroforming in Si-SiO<Subscript>2</Subscript>-W structures based on <Emphasis Type="Italic">n</Emphasis>-Si and <Emphasis Type="Italic">p</Emphasis>-Si

The experimental results of studying electroforming in open Si-SiO₂-W sandwich structures that have an SiO₂ layer approximately 20 nm thick are reported. It is noted that these processes are radically different for p-Si and n-Si. In the former case, the current-voltage characteristic is N-shaped, which is typical of electroforming. In the latter case, the dependence is S-shaped, which is typical of an electrical breakdown with thermal instability. The mechanisms of the above processes are discussed. The noted distinction can be associated with the fact that it is not the hole flow but only the electron flow across the structure that leads to the decomposition of molecules on the surface of the insulating gap and to the formation of conducting-phase particles from these molecules.     

Electronic Processes in CdIn<Subscript>2</Subscript>Te<Subscript>4</Subscript> Crystals

The results of investigations of electrical, optical, and photoelectric properties of CdIn₂Te⁴ crystals, which were grown by the Bridgman method are presented. It is shown that electrical conductivity is determined mainly by electrons with the effective mass m_n = 0.44m₀ and the mobility 120–140 cm²/(V s), which weakly depends on temperature. CdIn₂Te₄ behaves as a partially compensated semiconductor with the donor-center ionization energy E_d = 0.38 eV and the compensation level K = N_a/N_d = 0.36. The absorption-coefficient spectra at the energy hν < E_g = 1.27 eV are subject to the Urbach rule with a typical energy of 18–25 meV. The photoconductivity depends on the sample thickness. The diffusion length, the charge-carrier lifetime, and the surface-recombination rate are determined from the photoconductivity spectra.     

Electrical and photoelectric properties of <Emphasis Type="Italic">n</Emphasis>-TiN/<Emphasis Type="Italic">p</Emphasis>-Hg<Subscript>3</Subscript>In<Subscript>2</Subscript>Te<Subscript>6</Subscript> heterostructures

n-TiN/p-Hg₃In₂Te₆ heterostructures are fabricated by depositing a thin n-type titanium nitride (TiN) film onto prepared p-type Hg₃In₂Te₆ plates using reactive magnetron sputtering. Their electrical and photoelectric properties are studied. Dominant charge-transport mechanisms under forward bias are analyzed within tunneling-recombination and tunneling models. The fabricated n-TiN/p-Hg₃In₂Te₆ structures have the following photoelectric parameters at an illumination intensity of 80 mW/cm²: the open-circuit voltage is V_OC = 0.52 V, the short-circuit current is I_SC = 0.265 mA/cm², and the fill factor is FF = 0.39.     

<Emphasis Type="Italic">E</Emphasis><Subscript>0</Subscript> photoreflectance spectra of semiconductor structures with a high density of interface states

The results of a photoreflectance spectroscopy study of Ga₂Se₃/n-GaAs samples prepared by long-term annealing of GaAs wafers (n≈10¹⁷ cm⁻³) in a Se-vapor atmosphere are presented. It was established that no photovoltage appears in the interface region of these structures under illumination. Photogeneration of the charge carriers in the substrate does not lead to a change in the Fermi level position at the interface, with only the depth of the space-charge region being modulated. The quantitative analysis of the spectra also indicates that the growth of a thick (∼ 1 μm) Ga₂Se₃ layer does not result in the expected shift of the Fermi level position in comparison to the natural oxide-covered surface. __________ Translated from Fizika i Tekhnika Poluprovodnikov, Vol. 36, No. 7, 2002, pp. 838–842. Original Russian Text Copyright ? 2002 by Kuz’menko, Domashevskaya.     

Effect of copper doping on kinetic phenomena in <Emphasis Type="Italic">n</Emphasis>-Bi<Subscript>2</Subscript>Te<Subscript>2.85</Subscript>Se<Subscript>0.15</Subscript>

In single crystals of copper-doped and undoped Bi₂Te_2.85Se_0.15 solid solutions with an electron concentration close to 1 × 10¹⁹ cm^?3, the temperature dependences are investigated for the Hall (R ₁₂₃, R ₃₂₁) and Seebeck (S ₁₁) kinetic coefficients, the electrical-conductivity (σ ₁₁), Nernst-Ettingshausen (Q ₁₂₃), and thermalconductivity (k ₁₁) coefficients in the temperature range of 77–400 K. The absence of noticeable anomalies in the temperature dependences of the kinetic coefficients makes it possible to use the one-band model when analyzing the experimental results. Within the framework of the one-band model, the effective mass of density of states (m _d ≈ 0.8m ₀), the energy gap (ε_g ≈ 0.2 eV), and the effective scattering parameter (r _eff ≈ 0.2) are estimated. The obtained value of the parameter r _eff is indicative of the mixed electron-scattering mechanism with the dominant scattering by acoustic phonons. Data on the thermal conductivity and the lattice resistivity obtained by subtracting the electron contribution according to the Wiedemann-Franz law are presented.     

Effect of thallium doping on the mobility of electrons in Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> and holes in Sb<Subscript>2</Subscript>Te<Subscript>3</Subscript>

The Shubnikov–de Haas effect and the Hall effect in n-Bi_2–xTl_xSe₃ (x = 0, 0.01, 0.02, 0.04) and p-Sb_2–xTl_xTe₃ (x = 0, 0.005, 0.015, 0.05) single crystals are studied. The carrier mobilities and their changes upon Tl doping are calculated by the Fourier spectra of oscillations. It is found shown that Tl doping decreases the electron concentration in n-Bi_2–xTl_xSe₃ and increases the electron mobility. In p-Sb_2–xTl_xTe₃, both the hole concentration and mobility decrease upon Tl doping. The change in the crystal defect concentration, which leads to these effects, is discussed.     

Energy spectrum of charge carriers in Ag<Subscript>2</Subscript>Te

On the basis of investigations of the temperature and concentration dependences of kinetic coefficients (the Hall coefficientR, the electrical conductivity σ, and thermopower α₀) in n-type Ag₂Te, it is established that Ag atoms in Ag₂Te create the shallow donor levels located at a distance of (0.002?7 × 10^?5 T) eV from the bottom of the conduction band. It is shown that silver telluride has n-type conductivity starting with the deficiency of Ag ≥ 0.01 at % in the stoichiometric composition, and it is practically impossible to achieve the stoichiometric composition in Ag₂Te.     

Modification of Au-Ti(W,Cr, TiB<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)-GaAs contacts properties caused by external influences

In this paper it is considered an influence of gamma-radiation ⁶⁰Co, microwave and ultrasonic processing on electro-physical properties and relaxation of internal stresses in Au-Ti(W, Cr, TiB _x )-GaAs contacts, based on GaAs plate, containing n-n ⁺ structures of GaAs. Correlation between radius of curvature of GaAs plates and contact parameters is detected. It is shown experimentally, that modification of electro-physical parameters of diodes with Schottky barrier, based on GaAs is specified by internal stresses relaxation in gallium arsenide structures with contacts.     

Effect of ZnO Nanoparticles on the Sintering Behavior and Physical Properties of Bi<Subscript>0.5</Subscript>(Na<Subscript>0.8</Subscript>K<Subscript>0.2</Subscript>)<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript> Lead-Free Ceramics

Sintered Bi_0.5(Na_0.8K_0.2)_0.5TiO₃ + x wt.% ZnO nanoparticle (BNKT–xZnO_n) ceramics have been fabricated by conventional annealing with the aid of ultrasound waves for preliminary milling. Because of the presence of the liquid Bi₂O₃–ZnO phase at the eutectic point of 738°C, the sintering temperature decreased from 1150°C to 1000°C, and the morphology phase boundary of BNKT–xZnO_n ceramics can be clarified by two separated peaks at (002)_T and (200)_T of 2θ in the x-ray diffraction (XRD) patterns. The improvement of ferroelectric properties has been obtained for BNZT–0.2 wt.% ZnO_n ceramics by the increase of remanent polarization up to 20.4 μC/cm² and a decrease of electric coercive field down to 14.2 kV/cm. The piezoelectric parameters of the ceramic included a piezoelectric charge constant of d ₃₁ = 78 pC/N; electromechanical coupling factors k _p = 0.31 and k _t = 0.34, larger than the values of 42 pC/N, 0.12 and 0.13, respectively, were obtained for the BNKT ceramics.     

Optical Properties of K<Subscript>2</Subscript>O-Li<Subscript>2</Subscript>O-WO<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> Glasses: Evidence of Mixed Alkali Effect

Glass with compositions xK₂O-(30 ? x)Li₂O-10WO₃-60B₂O₃ for 0 ≤ x ≤ 30 mol.% have been prepared using the normal melt quenching technique. The optical reflection and absorption spectra were recorded at room temperature in the wavelength range 300–800 nm. From the absorption edge studies, the values of the optical band gap (E _opt) and Urbach energy (ΔE) have been evaluated. The values of E _opt and ΔE vary non-linearly with composition parameter, showing the mixed alkali effect. The dispersion of the refractive index is discussed in terms of the single oscillator Wemple Di-Domenico model.     

Effects of Nb Content on the Ferroelectric and Dielectric Properties of Nb/Nd-Co-doped Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript> Thin Films

Nd/Nb-co-substituted Bi_3.15Nd_0.85Ti_3?x Nb _x O₁₂ (BNTN _x , x = 0.01, 0.03, 0.05 and 0.07) thin films were grown on Pt/Ti/SiO₂/Si (100) substrates by chemical solution deposition. The effects of Nb content on the micro-structural, dielectric, ferroelectric, leakage current and capacitive properties of the BNTN _x thin films were investigated. A low-concentration substitution with Nb ions in BNTN _x can greatly enhance its remanent polarization (2P _r) and reduce the coercive field (2E _c) compared with those of Bi₄Ti₃O₁₂ (BIT) thin film. The highest 2P _r (71.4 μC/cm²) was observed in the BNTN_0.03 thin film when the 2E _c was 202 kV/cm. Leakage currents of all the films were on the order of 10^?6 to 10^?5 A/cm², and the BNTN_0.03 thin film has a minimum leakage current (2.1 × 10^?6 A/cm²) under the high electric field (267 kV/cm). Besides, the C–V curve of the BNTN_0.03 thin film is the most symmetrical, and the maximum tunability (21.0%) was also observed in this film. The BNTN_0.03 thin film shows the largest dielectric constant and the lowest dielectric loss and its maximum Curie temperature is 410 ± 5°C.     

<Emphasis Type="Italic">p</Emphasis><Superscript>+</Superscript>-Si-<Emphasis Type="Italic">n</Emphasis>-CdF<Subscript>2</Subscript> heterojunctions

Boron diffusion and the vapor-phase deposition of silicon layers are used to prepare ultrashallow p⁺-n junctions and p⁺-Si-n-CdF₂ heterostructures on an n-CdF₂ crystal surface. Forward portions of the I–V characteristics of the p⁺-n junctions and p⁺-Si-n-CdF₂ heterojunctions reveal the CdF₂ band gap (7.8 eV), as well as allow the identification of the valence-band structure of cadmium fluoride crystals. Under conditions in which forward bias is applied to the p⁺-Si-n-CdF₂ heterojunctions, electroluminescence spectra are measured for the first time in the visible spectral region.     

Analog/RF Study of Self-aligned In<Subscript>0.53</Subscript>Ga<Subscript>0.47</Subscript>As MOSFET with Scaled Gate Length

This study presents the impact of gate length scaling on analog and radio frequency (RF) performance of a self- aligned multi-gate n-type In_0.53Ga_0.47As metal oxide semiconductor field effect transistor. The device is fabricated using a self-aligned method, air-bridge technology, and 8 nm thickness of the Al₂O₃ oxide layer with different gate lengths. The transconductance-to-normalized drain current ratio (g _m/I _D) method is implemented to investigate analog parameters. Moreover, g _m and drain conductance (g _D) as key parameters in analog performance of the device are evaluated with g _m/I _D and gate length variation, where g _m and g _D are both showing enhancement due to scaling of the gate length. Early voltage (V _EA) and intrinsic voltage gain (A _V) value presents a decreasing trend by shrinking the gate length. In addition, the results of RF measurement for cut-off and maximum oscillation frequency for devices with different gate lengths are compared.     

Electrical and thermoelectric properties of <Emphasis Type="Italic">p</Emphasis>-Ag<Subscript>2</Subscript>Te

Temperature dependences of the Hall coefficient R, electrical conductivity σ, and thermopower α₀ are investigated in the range of 4–300 K. The specific features observed in temperature dependences R(T), σ(T), and α₀(T) are interpreted in the context of a model with two types of charge carriers.     

Interphase interactions and features of structural relaxation in TiB<Subscript>x</Subscript>-<Emphasis Type="Italic">n</Emphasis>-GaAs (InP,GaP, 6<Emphasis Type="Italic">H</Emphasis>-SiC) contacts subjected to active treatment

The results of experimental studies of interphase interactions in TiB_x-n-GaAs (GaP, InP, 6H-SiC) contacts stimulated by external effects are described. These effects are rapid thermal annealing at temperatures as high as 1000°C, microwave treatment at f=2.5 GHz, and ⁶⁰Co γ radiation in the range of doses 10⁵–10⁷ rad. Possible thermal and athermal relaxation mechanisms of internal stresses are considered. It is shown that thermally stable TiB_x-n-GaAs (GaP, InP, 6H-SiC) interfaces can be formed.