Controllable Molecular Doping and Charge Transport in Solution‐Processed Polymer Semiconducting Layers

Here, controlled p‐type doping of poly(2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylene vinylene) (MEH‐PPV) deposited from solution using tetrafluoro‐tetracyanoquinodimethane (F4‐TCNQ) as a dopant is presented. By using a co‐solvent, aggregation in solution can be prevented and doped films can be deposited. Upon doping the current–voltage characteristics of MEH‐PPV‐based hole‐only devices are increased by several orders of magnitude and a clear Ohmic behavior is observed at low bias. Taking the density dependence of the hole mobility into account the free hole concentration due to doping can be derived. It is found that a molar doping ratio of 1 F4‐TCNQ dopant per 600 repeat units of MEH‐PPV leads to a free carrier density of 4 × 10²² m^?3. Neglecting the density‐dependent mobility would lead to an overestimation of the free hole density by an order of magnitude. The free hole densities are further confirmed by impedance measurements on Schottky diodes based on F4‐TCNQ doped MEH‐PPV and a silver electrode.     

Tunable Dopants with Intrinsic Counterion Separation Reveal the Effects of Electron Affinity on Dopant Intercalation and Free Carrier Production in Sequentially Doped Conjugated Polymer Films

Carrier mobility in doped conjugated polymers is limited by Coulomb interactions with dopant counterions. This complicates studying the effect of the dopant's oxidation potential on carrier generation because different dopants have different Coulomb interactions with polarons on the polymer backbone. Here, dodecaborane (DDB)‐based dopants are used, which electrostatically shield counterions from carriers and have tunable redox potentials at constant size and shape. DDB dopants produce mobile carriers due to spatial separation of the counterion, and those with greater energetic offsets produce more carriers. Neutron reflectometry indicates that dopant infiltration into conjugated polymer films is redox‐potential‐driven. Remarkably, X‐ray scattering shows that despite their large 2‐nm size, DDBs intercalate into the crystalline polymer lamellae like small molecules, indicating that this is the preferred location for dopants of any size. These findings elucidate why doping conjugated polymers usually produces integer, rather than partial charge transfer: dopant counterions effectively intercalate into the lamellae, far from the polarons on the polymer backbone. Finally, it is shown that the IR spectrum provides a simple way to determine polaron mobility. Overall, higher oxidation potentials lead to higher doping efficiencies, with values reaching 100% for driving forces sufficient to dope poorly crystalline regions of the film.     

Anisotropy of Charge Transport in a Uniaxially Aligned and Chain‐Extended,High‐Mobility,Conjugated Polymer Semiconductor

Charge transport in the ribbon phase of poly(2,5‐bis(3‐alkylthiophen‐2‐yl)thieno[3,2‐b]thiophene) (PBTTT)—one of the most highly ordered, chain‐extended crystalline microstructures available in a conjugated polymer semiconductor—is studied. Ribbon‐phase PBTTT has previously been found not to exhibit high carrier mobilities, but it is shown here that field‐effect mobilities depend strongly on the device architecture and active interface. When devices are constructed such that the ribbon‐phase films are in contact with either a polymer gate dielectric or an SiO₂ gate dielectric modified by a hydrophobic, self‐assembled monolayer, high mobilities of up to 0.4 cm² V^?1 s^?1 can be achieved, which is comparable to those observed previously in terrace‐phase PBTTT. In uniaxially aligned, zone‐cast films of ribbon‐phase PBTTT the mobility anisotropy is measured for transport both parallel and perpendicular to the polymer chain direction. The mobility anisotropy is relatively small, with the mobility along the polymer chain direction being higher by a factor of 3–5, consistent with the grain size encountered in the two transport directions.     

Precise Control of Lamellar Thickness in Highly Oriented Regioregular Poly(3‐Hexylthiophene) Thin Films Prepared by High‐Temperature Rubbing: Correlations with Optical Properties and Charge Transport

Precise control of orientation and crystallinity is achieved in regioregular poly(3‐hexylthiophene) (P3HT) thin films by using high‐temperature rubbing, a fast and effective alignment method. Rubbing P3HT films at temperatures T_R ≥ 144 °C generates highly oriented crystalline films with a periodic lamellar morphology with a dichroic ratio reaching 25. The crystallinity and the average crystal size along the chain axis direction, l_c, are determined by high‐resolution transmission electron microscopy and differential scanning calorimetry. The inverse of the lamellar period l scales with the supercooling and can accordingly be controlled by the rubbing temperature T_R. Uniquely, the observed exciton coupling in P3HT crystals is correlated to the length of the average planarized chain segments l_c in the crystals. The high alignment and crystallinity observed for T_R > 200 °C cannot translate to high hole mobilities parallel to the rubbing because of the adverse effect of amorphous zones interrupting charge transport between crystalline lamellae. Although tie chains bridge successive P3HT crystals through amorphous zones, their twisted conformation restrains interlamellar charge transport. The evolution of charge transport anisotropy is correlated to the evolution of the dominant contact plane from mainly face‐on (T_R ≤ 100 °C) to edge‐on (T_R ≥ 170 °C).     

Effect of Spacer Length of Siloxane‐Terminated Side Chains on Charge Transport in Isoindigo‐Based Polymer Semiconductor Thin Films

A series of isoindigo‐based conjugated polymers (PII2F‐C_mSi, m = 3–11) with alkyl siloxane‐terminated side chains are prepared, in which the branching point is systematically “moved away” from the conjugated backbone by one carbon atom. To investigate the structure–property relationship, the polymer thin film is subsequently tested in top‐contact field‐effect transistors, and further characterized by both grazing incidence X‐ray diffraction and atomic force microscopy. Hole mobilities over 1 cm² V^?1 s^?1 is exhibited for all soluble PII2F‐C_mSi (m = 5–11) polymers, which is 10 times higher than the reference polymer with same polymer backbone. PII2F‐C₉Si shows the highest mobility of 4.8 cm² V^?1 s^?1, even though PII2F‐C₁₁Si exhibits the smallest π–π stacking distance at 3.379 Å. In specific, when the branching point is at, or beyond, the third carbon atoms, the contribution to charge transport arising from π–π stacking distance shortening becomes less significant. Other factors, such as thin‐film microstructure, crystallinity, domain size, become more important in affecting the resulting device's charge transport.     

Highly Efficient Microscopic Charge Transport within Crystalline Domains in a Furan‐Flanked Diketopyrrolopyrrole‐Based Conjugated Copolymer

Elucidating the interrelation between the molecular structure and charge transport properties in conjugated polymer thin films is an essential issue in developing the design principle of high‐performance polymer materials for application in organic electronics. In particular, the backbone planarity is suggested to be a key element that governs the transport performance, especially in recently developed donor–acceptor (D–A)‐type copolymers exhibiting high mobility, whereas the direct evaluation of the intrinsic transport performance, usually realized only within the small crystalline domains, is difficult by using conventional macroscopic measurements. Here, it is demonstrated that a D–A type copolymer, PDPPF‐DTT, which consists of furan‐flanked diketopyrrolopyrrole (DPP) and dithienothiophene (DTT) units in the conjugated backbone, exhibits a highly efficient charge transport performance within the crystalline domains with a remarkably low activation energy of less than 8 meV, based on microscopic measurements using field‐induced electron spin resonance spectroscopy. This high transport performance is primarily caused by the high backbone planarity realized by introducing furan‐flanked DPP and fused dithienothiophene units, which is demonstrated from the density functional theory calculations. This result provides a microscopic indication of the effectiveness of the present molecular design to produce a planar backbone and realize highly efficient charge transport performance.     

Linking Glass-Transition Behavior to Photophysical and Charge Transport Properties of High-Mobility Conjugated Polymers

The measurement of the mechanical properties of conjugated polymers can reveal highly relevant information linking optoelectronic properties to underlying microstructures and the knowledge of the glass transition temperature (T_g) is paramount for informing the choice of processing conditions and for interpreting the thermal stability of devices. In this work, we use dynamical mechanical analysis to determine the T_g of a range of state-of-the-art conjugated polymers with different degrees of crystallinity that are widely studied for applications in organic field-effect transistors. We compare our measured values for T_g to the theoretical value predicted by a recent work based on the concept of effective mobility ζ. The comparison shows that for conjugated polymers with a modest length of the monomer units, the T_g values agree well with theoretically predictions. However, for the near-amorphous, indacenodithiophene–benzothiadiazole family of polymers with more extended backbone units, values for T_g appear to be significantly higher, predicted by theory. However, values for T_g are correlated with the sub-bandgap optical absorption suggesting the possible role of the interchain short contacts within materials’ amorphous domains.     

Ambipolar Charge Transport in Air‐Stable Polymer Blend Thin‐Film Transistors

Ambipolar thin‐film transistors based on a series of air‐stable, solution‐processed blends of an n‐type polymer poly(benzobisimidazobenzophenanthroline) (BBL) and a p‐type small molecule, copper phthalocyanine (CuPc) are demonstrated, where all fabrication and measurements are performed under ambient conditions. The hole mobilities are in the range of 6.0 × 10^–6 to 2.0 × 10^–4 cm² V^–1 s^–1 and electron mobilities are in the range of 2.0 × 10^–6 to 3.0 × 10^–5 cm² V^–1 s^–1, depending on the blend composition. UV‐vis spectroscopy and electron diffraction show crystallization of CuPc in the metastable α‐crystal form within the semicrystalline BBL matrix. These CuPc domains develop into elongated ribbon‐like crystalline nanostructures when the blend films are processed in methanol, but not when they are processed in water. On methylene chloride vapor annealing of the blend films, a phase transformation of CuPc from the α‐form to the β‐form is observed, as shown by optical absorption spectroscopy and electron diffraction. Ambipolar charge transport is only observed in the blend films where CuPc crystallized in the elongated ribbon‐like nanostructures (α‐form). Ambipolar behavior is not observed with CuPc in the β‐polymorph. Unipolar hole mobilities as high as 2.0 × 10^–3 cm² V^–1 s^–1 are observed in these solution‐processed blend field‐effect transistors (FETs) on prolonged treatment in methanol, comparable to previously reported hole mobilities in thermally evaporated CuPc FETs. These results show that ambipolar charge transport and carrier mobilities in multicomponent organic semiconductors are intricately related to the phase‐separated nanoscale and crystalline morphology.     

Mechanism of Crystallization and Implications for Charge Transport in Poly(3‐ethylhexylthiophene) Thin Films

In this work, crystallization kinetics and aggregate growth of poly(3‐ethylhexylthiophene) (P3EHT) thin films are studied as a function of film thickness. X‐ray diffraction and optical absorption show that individual aggregates and crystallites grow anisotropically and mostly along only two packing directions: the alkyl stacking and the polymer chain backbone direction. Further, it is also determined that crystallization kinetics is limited by the reorganization of polymer chains and depends strongly on the film thickness and average molecular weight. Time‐dependent, field‐effect hole mobilities in thin films reveal a percolation threshold for both low and high molecular weight P3EHT. Structural analysis reveals that charge percolation requires bridged aggregates separated by a distance of ≈2–3 nm, which is on the order of the polymer persistence length. These results thus highlight the importance of tie molecules and inter‐aggregate distance in supporting charge percolation in semiconducting polymer thin films. The study as a whole also demonstrates that P3EHT is an ideal model system for polythiophenes and should prove to be useful for future investigations into crystallization kinetics.     

Quantifying the Energy Barriers and Elucidating the Charge Transport Mechanisms across Interspherulite Boundaries in Solution‐Processed Organic Semiconductor Thin Films

Grain boundaries act as bottlenecks to charge transport in devices comprising polycrystalline organic active layers. To improve device performance, the nature and resulting impact of these boundaries must be better understood. The densities and energy levels of shallow traps within and across triethylsilylethynyl anthradithiophene (TES ADT) spherulites are quantified. The trap density is 7 × 10¹⁰ cm^?2 in devices whose channels reside within a single spherulite and up to 3 × 10¹¹ cm^?2 for devices whose channels span a spherulite boundary. The activation energy for charge transport, E_A, increases from 34 meV within a spherulite to 50–66 meV across a boundary, depending on the angle of molecular mismatch. Despite being molecular in nature, these E_A’s are more akin to those found for charge transport in polymer semiconductors. Presumably, trapped TES ADT at the boundary can electrically connect neighboring spherulites, similar to polymer chains connecting crystallites in polymer semiconductor thin films.     

Nongeminate Recombination and Charge Transport Limitations in Diketopyrrolopyrrole‐Based Solution‐Processed Small Molecule Solar Cells

Charge transport and nongeminate recombination are investigated in two solution‐processed small molecule bulk heterojunction solar cells consisting of diketopyrrolopyrrole (DPP)‐based donor molecules, mono‐DPP and bis‐DPP, blended with [6,6]‐phenyl‐C71‐butyric acid methyl ester (PCBM). While the bis‐DPP system exhibits a high fill factor (62%) the mono‐DPP system suffers from pronounced voltage dependent losses, which limit both the fill factor (46%) and short circuit current. A method to determine the average charge carrier density, recombination current, and effective carrier lifetime in operating solar cells as a function of applied bias is demonstrated. These results and light intensity measurements of the current‐voltage characteristics indicate that the mono‐DPP system is severely limited by nongeminate recombination losses. Further analysis reveals that the most significant factor leading to the difference in fill factor is the comparatively poor hole transport properties in the mono‐DPP system (2 × 10^?5 cm² V^?1 s^?1 versus 34 × 10^?5 cm² V^?1 s^?1). These results suggest that future design of donor molecules for organic photovoltaics should aim to increase charge carrier mobility thereby enabling faster sweep out of charge carriers before they are lost to nongeminate recombination.     

Doping Indium Oxide Films with Amino-Polymers of Varying Nitrogen Content Markedly Affects Charge Transport and Mechanical Flexibility

Here, correlations between polymer structure and charge transport in solution-processed indium oxide, In₂O₃:polymer blend flexible thin film transistors (TFTs) are investigated using four polymers having electron-donating amine functionalities (polyethyleneimine (PEI), poly(allylamine), polyethyleneimine ethoxylated (PEIE), and PVP-NH₂ (PVP; poly(4-vinylphenol)), and two PEI-PEIE mixtures) with varied atomic amine nitrogen content (N%) of 12.6, 9.1, 6.9, 2.6, respectively. These amino-polymers influence the semiconducting oxide film TFT electron mobilities via a delicate interplay of electron transfer/doping, charge generation/trap-filling, film morphological/microstructural variations, which depend on the polymer structure, thermal stability, and N%, as well as the polymer content of the In₂O₃ precursor and the carbon residue content in In₂O₃. Thus, increasing the N% from 0.0% in the control PVP to 12.6% in PEI increases the electron doping capacity, the polymer content of the blend formulation, and the blend TFT field-effect mobility. Optimal polymer incorporation invariably enhances charge transport by as much as ≈2×, leading to a maximum carrier mobility of 8.47 ± 0.73 cm² V⁻¹ s⁻¹ on rigid Si/SiO_x substrates and a remarkable 31.24 ± 0.41 cm² V⁻¹ s⁻¹ on mechanically flexible polyimide/Au/F:AlO_x substrates with Al contacts. Furthermore, all of the polymers equally enhance the mechanical durability of the corresponding In₂O₃:polymer blend TFTs with respect to mechanical stress.     

Impact of Nonfullerene Molecular Architecture on Charge Generation,Transport, and Morphology in PTB7‐Th‐Based Organic Solar Cells

Despite the rapid development of nonfullerene acceptors (NFAs), the fundamental understanding on the relationship between NFA molecular architecture, morphology, and device performance is still lacking. Herein, poly[[4,8‐bis[5‐(2‐ethylhexyl)thiophene‐2‐yl]benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]‐thieno[3,4‐b]thiophenediyl]] (PTB7‐Th) is used as the donor polymer to compare an NFA with a 3D architecture (SF‐PDI4) to a well‐studied NFA with a linear acceptor–donor–acceptor (A–D–A) architecture (ITIC). The data suggest that the NFA ITIC with a linear molecular structure shows a better device performance due to an increase in short‐circuit current ( J_sc) and fill factor (FF) compared to the 3D SF‐PDI4. The charge generation dynamics measured by femtosecond transient absorption spectroscopy (TAS) reveals that the exciton dissociation process in the PTB7‐Th:ITIC films is highly efficient. In addition, the PTB7‐Th:ITIC blend shows a higher electron mobility and lower energetic disorder compared to the PTB7‐Th:SF‐PDI4 blend, leading to higher values of J_sc and FF. The compositional sensitive resonant soft X‐ray scattering (R‐SoXS) results indicate that ITIC molecules form more pure domains with reduced domain spacing, resulting in more efficient charge transport compared with the SF‐PDI4 blend. It is proposed that both the molecular structure and the corresponding morphology of ITIC play a vital role for the good solar cell device performance.     

Counterion Control and the Spectral Signatures of Polarons,Coupled Polarons,and Bipolarons in Doped P3HT Films

When an electron is removed from a conjugated polymer, such as poly(3-hexylthiophene-2,5-diyl) (P3HT), the remaining hole and associated change in the polymer backbone structure from aromatic to quinoidal are referred to as a polaron. Bipolarons are created by removing the unpaired electron from an already-oxidized polymer segment. In electrochemically-doped P3HT films, polarons, and bipolarons are readily observed, but in chemically-doped P3HT films, bipolarons rarely form. This is explained by studying the effects of counterion position on the formation of polarons, strongly coupled polarons, and bipolarons using both spectroscopic and X-ray diffraction experiments and time-dependent density functional theory calculations. The counterion positions control whether two polarons spin-pair to form a bipolaron or whether they strongly couple without spin-pairing are found. When two counterions lie close to the same polymer segment, bipolarons can form, with an absorption spectrum that is blueshifted from that of a single polaron. Otherwise, polarons at high concentrations do not spin-pair, but instead J-couple, leading to a redshifted absorption spectrum. The counterion location needed for bipolaron formation is accompanied by a loss of polymer crystallinity. These results explain the observed formation order of single polarons, coupled single polarons, and singlet bipolarons in electrochemically- and chemically-doped conjugated polymers.     

Highly Efficient Charge Transport in a Quasi‐Monolayer Semiconductor on Pure Polymer Dielectric

The study of monolayer organic field‐effect transistors (MOFETs) provides an effective way to investigate the intrinsic charge transport of semiconductors. To date, the research based on organic monolayers on polymeric dielectrics lays far behind that on inorganic dielectrics and the realization of a bulk‐like carrier mobility on pure polymer dielectrics is still a formidable challenge for MOFETs. Herein, a quasi‐monolayer coverage of pentacene film with orthorhombic phase is grown on the poly (amic acid) (PAA) dielectric layer. More significantly, charge density redistribution occurs at the interface between the pentacene and PAA caused by electron transfer from pentacene to the PAA dielectric layer, which is verified by theoretical simulations and experiments. As a consequence, an enhanced hole accumulation layer is formed and pentacene‐based MOFETs on pure polymer dielectrics exhibit bulk‐like carrier mobilities of up to 13.7 cm² V^?1 s^?1 from the saturation region at low V_GS, 9.1 cm² V^?1 s^?1 at high V_GS and 7.6 cm² V^?1 s^?1 from the linear region, which presents one of the best results of previously reported MOFETs so far and indicates that the monolayer semiconductor growing on pure polymer dielectric could produce highly efficient charge transport.     

Effect of Charge Density on Energy‐Transfer Properties of Cationic Conjugated Polymers

Cationic conjugated polymers (CCPs) with different charge densities are synthesized via Suzuki polymerization. The CCPs show similar optical properties in aqueous solutions but obvious difference in fluorescence resonance energy transfer (FRET) to Texas Red‐labeled single‐stranded DNA (ssDNA‐TR). Both CCP and TR fluorescence quenching are revealed to influence the energy‐transfer process. The difference in quantum yields of CCP/ssDNA complexes highlights the importance of polymer side‐chain structures and charge density. A CCP with a high charge density and ethylene oxide as the side chain provides the highest quantum yield for CCP/ssDNA complexes, which favors FRET. TR quenching within the CCP/ssDNA complexes is predominantly determined by the CCP charge density. In contrast to the other two polymers, the CCP with low charge density provides the most‐intense polymer‐sensitized TR emission, which is due to the collective response of more optically active polymer units around TR and the minimized TR self‐quenching within the CCP/ssDNA‐TR complexes. These studies provide a new guideline for improving the signal amplification of conjugated‐polymer‐based optical sensors.     

Photoconductivity of a Low‐Bandgap Conjugated Polymer

The photoconductive properties of a novel low‐bandgap conjugated polymer, poly[2,6‐(4,4‐bis‐(2‐ethylhexyl)‐4H‐cyclopenta[2,1‐b;3,4‐b′]dithiophene)‐alt‐4,7‐(2,1,3‐benzothiadiazole)], PCPDTBT, with an optical energy gap of E_g ～ 1.5 eV, have been studied. The results of photoluminescence and photoconductivity measurements indicate efficient electron transfer from PCPDTBT to PCBM ([6,6]‐phenyl‐C61 butyric acid methyl ester, a fullerene derivative), where PCPDTBT acts as the electron donor and PCBM as the electron acceptor. Electron‐transfer facilitates charge separation and results in prolonged carrier lifetime, as observed by fast (t > 100 ps) transient photoconductivity measurements. The photoresponsivities of PCPDTBT and PCPDTBT:PCBM are comparable to those of poly(3‐hexylthiophene), P3HT, and P3HT:PCBM, respectively. Moreover, the spectral sensitivity of PCPDTBT:PCBM extends significantly deeper into the infrared, to 900 nm, than that of P3HT. The potential of PCPDTBT as a material for high‐efficiency polymer solar cells is discussed.     

A Versatile Method to Fabricate Highly In‐Plane Aligned Conducting Polymer Films with Anisotropic Charge Transport and Thermoelectric Properties: The Key Role of Alkyl Side Chain Layers on the Doping Mechanism

A general method is proposed to produce oriented and highly crystalline conducting polymer layers. It combines the controlled orientation/crystallization of polymer films by high‐temperature rubbing with a soft‐doping method based on spin‐coating a solution of dopants in an orthogonal solvent. Doping rubbed films of regioregular poly(3‐alkylthiophene)s and poly(2,5‐bis(3‐dodecylthiophen‐2‐yl)thieno[3,2‐b ]thiophene) with 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane (F₄TCNQ) yields highly oriented conducting polymer films that display polarized UV–visible–near‐infrared (NIR) absorption, anisotropy in charge transport, and thermoelectric properties. Transmission electron microscopy and polarized UV–vis–NIR spectroscopy help understand and clarify the structure of the films and the doping mechanism. F₄TCNQ^? anions are incorporated into the layers of side chains and orient with their long molecular axis perpendicular to the polymer chains. The ordering of dopant molecules depends closely on the length and packing of the alkyl side chains. Increasing the dopant concentration results in a continuous variation of unit cell parameters of the doped phase. The high orientation results in anisotropic charge conductivity (σ) and thermoelectric properties that are both enhanced in the direction of the polymer chains (σ = 22 ± 5 S cm^?1 and S = 60 ± 2 µV K^?1). The method of fabrication of such highly oriented conducting polymer films is versatile and is applicable to a large palette of semiconducting polymers.     

Revealing the Interplay between Charge Transport,Luminescence Efficiency,and Morphology in Organic Light‐Emitting Diode Blends

Phosphorescent emissive materials in organic light‐emitting diodes (OLEDs) manufactured using evaporation are usually blended with host materials at a concentration of 3–15 wt% to avoid concentration quenching of the luminescence. Here, experimental measurements of hole mobility and photoluminescence are related to the atomic level morphology of films created using atomistic nonequilibrium molecular dynamics simulations mimicking the evaporation process with similar guest concentrations as those used in operational test devices. For blends of fac‐tris[2‐phenylpyridinato‐C2,N]iridium(III) [Ir(ppy)₃] in tris(4‐carbazoyl‐9‐ylphenyl)amine (TCTA), it is found that clustering of the Ir(ppy)₃ (surface of the molecules within ≈0.4 nm) in the simulated films is directly relatable to the experimentally‐measured hole mobility. Films containing 1–10 wt% of Ir(ppy)₃ in TCTA have a mobility of up to two orders of magnitude lower (≈10^?6 cm² V^?1 s^?1) than the neat TCTA film, which is consistent with the Ir(ppy)₃ molecules acting as hole traps due to their smaller ionization potential. Comparison of the simulated film morphologies with the measured photoluminescence properties shows that for luminescence quenching to occur, the Ir(ppy)₃ molecules have to have their ligands partially overlapping. Thus, the results show that the effect of guest interactions on charge transport and luminescence are markedly different for OLED light‐emitting layers.