Etching‐Doping Sedimentation Equilibrium Strategy: Accelerating Kinetics on Hollow Rh‐Doped CoFe‐Layered Double Hydroxides for Water Splitting

Exploring highly active and inexpensive bifunctional electrocatalysts for water‐splitting is considered to be one of the prerequisites for developing hydrogen energy technology. Here, an efficient simultaneous etching‐doping sedimentation equilibrium (EDSE) strategy is proposed to design and prepare hollow Rh‐doped CoFe‐layered double hydroxides for overall water splitting. The elaborate electrocatalyst with optimized composition and typical hollow structure accelerates the electrochemical reactions, which can achieve a current density of 10 mA cm^?2 at an overpotential of 28 mV (600 mA cm^?2 at 188 mV) for hydrogen evolution reaction (HER) and 100 mA cm^?2 at 245 mV for oxygen evolution reaction (OER). The cell voltage for overall water splitting of the electrolyzer assembled by this electrocatalyst is only 1.46 V, a value far lower than that of commercial electrolyzer constructed by Pt/C and RuO₂ and most reported bifunctional electrocatalysts. Furthermore, the existence of Fe vacancies introduced by Rh doping and the typical hollow structure are demonstrated to optimize the entire HER and OER processes. EDSE associates doping with template‐directed hollow structures and paves a new avenue for developing bifunctional electrocatalysts for overall water splitting. It is also believed to be practical in other catalysis fields as well.     

Metal‐Organic Frameworks Derived Nanotube of Nickel–Cobalt Bimetal Phosphides as Highly Efficient Electrocatalysts for Overall Water Splitting

The design of highly efficient, stable, and noble‐metal‐free bifunctional electrocatalysts for overall water splitting is critical but challenging. Herein, a facile and controllable synthesis strategy for nickel–cobalt bimetal phosphide nanotubes as highly efficient electrocatalysts for overall water splitting via low‐temperature phosphorization from a bimetallic metal‐organic framework (MOF‐74) precursor is reported. By optimizing the molar ratio of Co/Ni atoms in MOF‐74, a series of Cox Niy P catalysts are synthesized, and the obtained Co4Ni1P has a rare form of nanotubes that possess similar morphology to the MOF precursor and exhibit perfect dispersal of the active sites. The nanotubes show remarkable hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) catalytic performance in an alkaline electrolyte, affording a current density of 10 mA cm^?2 at overpotentials of 129 mV for HER and 245 mV for OER, respectively. An electrolyzer with Co4Ni1P nanotubes as both the cathode and anode catalyst in alkaline solutions achieves a current density of 10 mA cm^?2 at a voltage of 1.59 V, which is comparable to the integrated Pt/C and RuO₂ counterparts and ranks among the best of the metal‐phosphide electrocatalysts reported to date.     

Hierarchical Porous Ni3S4 with Enriched High‐Valence Ni Sites as a Robust Electrocatalyst for Efficient Oxygen Evolution Reaction

Electrochemical water splitting is a common way to produce hydrogen gas, but the sluggish kinetics of the oxygen evolution reaction (OER) significantly limits the overall energy conversion efficiency of water splitting. In this work, a highly active and stable, meso–macro hierarchical porous Ni₃S₄ architecture, enriched in Ni³⁺ is designed as an advanced electrocatalyst for OER. The obtained Ni₃S₄ architectures exhibit a relatively low overpotential of 257 mV at 10 mA cm^?2 and 300 mV at 50 mA cm^?2. Additionally, this Ni₃S₄ catalyst has excellent long‐term stability (no degradation after 300 h at 50 mA cm^?2). The outstanding OER performance is due to the high concentration of Ni³⁺ and the meso–macro hierarchical porous structure. The presence of Ni³⁺ enhances the chemisorption of OH^?, which facilitates electron transfer to the surface during OER. The hierarchical porosity increases the number of exposed active sites, and facilitates mass transport. A water‐splitting electrolyzer using the prepared Ni₃S₄ as the anode catalyst and Pt/C as the cathode catalyst achieves a low cell voltage of 1.51 V at 10 mA cm^?2. Therefore, this work provides a new strategy for the rational design of highly active OER electrocatalysts with high valence Ni³⁺ and hierarchical porous architectures.     

Promoting Active Sites in Core–Shell Nanowire Array as Mott–Schottky Electrocatalysts for Efficient and Stable Overall Water Splitting

Developing earth‐abundant, active, and robust electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remains a vital challenge for efficient conversion of sustainable energy sources. Herein, metal–semiconductor hybrids are reported with metallic nanoalloys on various defective oxide nanowire arrays (Cu/CuO_x, Co/CoO_x, and CuCo/CuCoO_x) as typical Mott–Schottky electrocatalysts. To build the highway of continuous electron transport between metals and semiconductors, nitrogen‐doped carbon (NC) has been implanted on metal–semiconductor nanowire array as core–shell conductive architecture. As expected, NC/CuCo/CuCoO_x nanowires arrays, as integrated Mott–Schottky electrocatalysts, present an overpotential of 112 mV at 10 mA cm^?2 and a low Tafel slope of 55 mV dec^?1 for HER, simultaneously delivering an overpotential of 190 mV at 10 mA cm^?2 for OER. Most importantly, NC/CuCo/CuCoO_x architectures, as both the anode and the cathode for overall water splitting, exhibit a current density of 10 mA cm^?2 at a cell voltage of 1.53 V with excellent stability due to high conductivity, large active surface area, abundant active sites, and the continuous electron transport from prominent synergetic effect among metal, semiconductor, and nitrogen‐doped carbon. This work represents an avenue to design and develop efficient and stable Mott–Schottky bifunctional electrocatalysts for promising energy conversion.     

Engineering an Earth‐Abundant Element‐Based Bifunctional Electrocatalyst for Highly Efficient and Durable Overall Water Splitting

The simultaneous and efficient evolution of hydrogen and oxygen with earth‐abundant, highly active, and robust bifunctional electrocatalysts is a significant concern in water splitting. Herein, non‐noble metal‐based Ni–Co–S bifunctional catalysts with tunable stoichiometry and morphology are realized. The engineering of electronic structure and subsequent morphological design synergistically contributes to significantly elevated electrocatalytic performance. Stable overpotentials (η₁₀) of 243 mV (vs reversible hydrogen electrode) for oxygen evolution reaction (OER) and 80 mV for hydrogen evolution reaction (HER), as well as Tafel slopes of 54.9 mV dec^?1 for OER and 58.5 mV dec^?1 for HER, are demonstrated. In addition, density functional theory calculations are performed to determine the optimal electronic structure via the electron density differences to verify the enhanced OER activity is related to the Co top site on the (110) surface. Moreover, the tandem bifunctional NiCo₂S₄ exhibit a required voltage of 1.58 V (J = 10 mA cm^?2) for simultaneous OER and HER, and no obvious performance decay is observed after 72 h. When integrated with a GaAs solar cell, the resulting photoassisted water splitting electrolyzer shows a certified solar‐to‐hydrogen efficiency of up to 18.01%, further demonstrating the feasibility of engineering protocols and the promising potential of bifunctional NiCo₂S₄ for large‐scale overall water splitting.     

Unraveling the Synergistic Mechanism of Bi-Functional Nickel–Iron Phosphides Catalysts for Overall Water Splitting

Ni–Fe bimetallic electrocatalysts are expected to replace existing precious metal catalysts for water splitting and achieve industrial applications due to their high intrinsic activity and low cost. However, the mechanism by which Ni and Fe species synergistically enhance catalytic activity remains obscure, which still needs further in-depth study. In this study, a highly active bi-functional electrocatalyst of Ni₂P/FeP heterostructures is constructed on Fe foam (Ni₂P/FeP-FF), clearly illustrating the effect of Ni on Fe species for oxygen evolution reaction (OER) and revealing the true catalytic active phase for hydrogen evolution reaction (HER). The Ni₂P/FeP-FF only needs overpotentials of 217 and 42 mV to reach 10 mA cm⁻² for OER and HER, respectively, exhibiting superior bi-functional activity for overall water splitting. The Ni can elevate the strength of Fe O on Ni₂P/FeP-FF surface and promote the formation of high-valence FeOOH phase during OER, thus enhancing OER performance. Based on first-principles calculations and Raman characterizations, the Ni₂P/Ni(OH)₂ heterojunction evolved from Ni₂P/FeP is identified as the real high active phase for HER. This study not only builds a near-commercial bifunctional electrocatalyst for overall water splitting, but also provides a deep insight for synergistic catalytic mechanism of Ni and Fe species.     

Efficient and Durable 3D Self‐Supported Nitrogen‐Doped Carbon‐Coupled Nickel/Cobalt Phosphide Electrodes: Stoichiometric Ratio Regulated Phase‐ and Morphology‐Dependent Overall Water Splitting Performance

The construction of a novel 3D self‐supported integrated Ni_xCo_2?xP@NC (0 < x < 2) nanowall array (NA) on Ni foam (NF) electrode constituting highly dispersed Ni_xCo_2?xP nanoparticles, nanorods, nanocapsules, and nanodendrites embedded in N‐doped carbon (NC) NA grown on NF is reported. Benefiting from the collective effects of special morphological and structural design and electronic structure engineering, the Ni_xCo_2?xP@NC NA/NF electrodes exhibit superior electrocatalytic performance for water splitting with an excellent stability in a wide pH range. The optimal NiCoP@NC NA/NF electrode exhibits the best hydrogen evolution reaction (HER) activity in acidic solution so far, attaining a current density of 10 mA cm^?2 at an overpotential of 34 mV. Moreover, the electrode manifests remarkable performances toward both HER and oxygen evolution reaction in alkaline medium with only small overpotentials of 37 mV at 10 mA cm^?2 and 305 mV at 50 mA cm^?2, respectively. Most importantly, when coupling with the NiCoP@NC NA/NF electrode for overall water splitting, an alkali electrolyzer delivers a current density of 20 mA cm^?2 at a very low cell voltage of ≈1.56 V. In addition, the NiCoP@NC NA/NF electrode has outstanding long‐term durability at j = 10 mA cm^?2 with a negligible degradation in current density over 22 h in both acidic and alkaline media.     

Electro‐Oxidation of Ni42 Steel: A Highly Active Bifunctional Electrocatalyst

Janus type water‐splitting catalysts have attracted highest attention as a tool of choice for solar to fuel conversion. AISI Ni42 steel is upon harsh anodization converted into a bifunctional electrocatalyst. Oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are highly efficiently and steadfast catalyzed at pH 7, 13, 14, 14.6 (OER) and at pH 0, 1, 13, 14, 14.6 (HER), respectively. The current density taken from long‐term OER measurements in pH 7 buffer solution upon the electro‐activated steel at 491 mV overpotential (η) is around four times higher (4 mA cm^?2) in comparison with recently developed OER electrocatalysts. The very strong voltage–current behavior of the catalyst shown in OER polarization experiments at both pH 7 and at pH 13 are even superior to those known for IrO₂‐RuO₂. No degradation of the catalyst is detected even when conditions close to standard industrial operations are applied to the catalyst. A stable Ni‐, Fe‐oxide based passivating layer sufficiently protects the bare metal for further oxidation. Quantitative charge to oxygen (OER) and charge to hydrogen (HER) conversion are confirmed. High‐resolution XPS spectra show that most likely γ?NiO(OH) and FeO(OH) are the catalytic active OER and NiO is the catalytic active HER species.     

Regulating the Electronic Structure of CoP Nanosheets by O Incorporation for High‐Efficiency Electrochemical Overall Water Splitting

The exploration of earth‐abundant and high‐efficiency bifunctional electrocatalysts for overall water splitting is of vital importance for the future of the hydrogen economy. Regulation of electronic structure through heteroatom doping represents one of the most powerful strategies to boost the electrocatalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, a rational design of O‐incorporated CoP (denoted as O‐CoP) nanosheets, which synergistically integrate the favorable thermodynamics through modification of electronic structures with accelerated kinetics through nanostructuring, is reported. Experimental results and density functional theory simulations manifest that the appropriate O incorporation into CoP can dramatically modulate the electronic structure of CoP and alter the adsorption free energies of reaction intermediates, thus promoting the HER and OER activities. Specifically, the optimized O‐CoP nanosheets exhibit efficient bifunctional performance in alkaline electrolyte, requiring overpotentials of 98 and 310 mV to deliver a current density of 10 mA cm^?2 for HER and OER, respectively. When served as bifunctional electrocatalysts for overall water splitting, a low cell voltage of 1.60 V is needed for achieving a current density of 10 mA cm^?2. This proposed anion‐doping strategy will bring new inspiration to boost the electrocatalytic performance of transition metal–based electrocatalysts for energy conversion applications.     

Overall Water Splitting Catalyzed Efficiently by an Ultrathin Nanosheet‐Built,Hollow Ni3S2‐Based Electrocatalyst

Making highly efficient catalysts for an overall ?water splitting reaction is vitally important to bring solar/electrical‐to‐hydrogen energy conversion processes into reality. Herein, the synthesis of ultrathin nanosheet‐based, hollow MoO_x/Ni₃S₂ composite microsphere catalysts on nickel foam, using ammonium molybdate as a precursor and the triblock copolymer pluronic P123 as a structure‐directing agent is reported. It is also shown that the resulting materials can serve as bifunctional, non‐noble metal electrocatalysts with high activity and stability for the hydrogen evolution reaction (HER) as well as the oxygen evolution reaction (OER). Thanks to their unique structural features, the materials give an impressive water‐splitting current density of 10 mA cm^?2 at ≈1.45 V with remarkable durability for >100 h when used as catalysts both at the cathode and the anode sides of an alkaline electrolyzer. This performance for an overall water splitting reaction is better than even those obtained with an electrolyzer consisting of noble metal‐based Pt/C and IrO_x/C catalytic couple—the benchmark catalysts for HER and OER, respectively.     

Autogenous Growth of Hierarchical NiFe(OH)x/FeS Nanosheet‐On‐Microsheet Arrays for Synergistically Enhanced High‐Output Water Oxidation

Practical electrochemical water splitting requires cost‐effective electrodes capable of steadily working at high output, leading to the challenges for efficient and stable electrodes for the oxygen evolution reaction (OER). Herein, by simply using conductive FeS microsheet arrays vertically pre‐grown on iron foam (FeS/IF) as both substrate and source to in situ form vertically aligned NiFe(OH)_x nanosheets arrays, a hierarchical electrode with a nano/micro sheet‐on‐sheet structure (NiFe(OH)_x/FeS/IF) can be readily achieved to meet the requirements. Such hierarchical electrode architecture with a superhydrophilic surface also allows for prompt gas release even at high output. As a result, NiFe(OH)_x/FeS/IF exhibits superior OER activity with an overpotential of 245 mV at 50 mA cm^?2 and can steadily output 1000 mA cm^?2 at a low overpotential of 332 mV. The water‐alkali electrolyzer using NiFe(OH)_x/FeS/IF as the anode can deliver 10 mA cm^?2 at 1.50 V and steadily operate at 300 mA cm^?2 with a small cell voltage for 70 h. Furthermore, a solar‐driven electrolyzer using the developed electrode demonstrates an exceptionally high solar‐to‐hydrogen efficiency of 18.6%. Such performance together with low‐cost Fe‐based materials and facile mass production suggest the present strategy may open up opportunities for rationally designing hierarchical electrocatalysts for practical water splitting or diverse applications.     

Physically Adsorbed Metal Ions in Porous Supports as Electrocatalysts for Oxygen Evolution Reaction

Developing highly efficient and earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is significantly important for water‐splitting. Here, for the first time it is reported that the physically adsorbed metal ions (PAMI) in porous materials can be served as highly efficient OER electrocatalysts, which provides a universal PAMI method to develop electrocatalysts. This PAMI method can be applied to almost all porous supports, including graphene, carbon nanotubes, C₃N₄, CaCO₃, and porous organic polymers and all the systems exhibit excellent OER performance. In particular, the as‐synthesized Co_0.7Fe_0.3CB exhibits a small overpotential of 295 mV and 350 mV at the current density of 10 mA cm^?2 and 100 mA cm^?2, respectively, which exceeds commercial 40 wt% IrO₂/CB and most reported non‐noble metal‐based OER catalysts. Moreover, the mass activity of Co_0.7Fe_0.3CB reaches 643.4 A g^?1 at the overpotential of 320 mV, which is nearly 4.7 times higher than that of 40 wt% IrO₂/CB. In addition, the advanced ex situ and in situ synchrotron X‐ray characterizations are carried out to unravel the PAMI synthetic process. In short, this PAMI method will break the conversional understanding, i.e., the most OER catalysts are synthesized chemically, because the new PAMI method does not require any chemical synthesis, which therefore opens a new avenue for the development of OER electrocatalysts.     

Cobalt–Cobalt Phosphide Nanoparticles@Nitrogen‐Phosphorus Doped Carbon/Graphene Derived from Cobalt Ions Adsorbed Saccharomycete Yeasts as an Efficient,Stable, and Large‐Current‐Density Electrode for Hydrogen Evolution Reactions

Development of electrocatalysts for hydrogen evolution reaction (HER) with low overpotential and robust stability remains as one of the most serious challenges for energy conversion. Herein, a serviceable and highly active HER electrocatalyst with multilevel porous structure (Co‐Co₂P nanoparticles@N, P doped carbon/reduced graphene oxides (Co‐Co₂P@NPC/rGO)) is synthesized by Saccharomycete cells as template to adsorb metal ions and graphene nanosheets as separating agent to prevent aggregation, which is composed of Co‐Co₂P nanoparticles with size of ≈104.7 nm embedded into carbonized Saccharomycete cells. The Saccharomycete cells provide not only carbon source to produce carbon shells, but also phosphorus source to prepare metal phosphides. In order to realize the practicability and permanent stability, the binderless and 3D electrodes composed of obtained Co‐Co₂P@NPC/rGO powder are constructed, which possess a low overpotential of 61.5 mV (achieve 10 mA cm^?2) and the high current density with extraordinary catalytic stability (1000 mA cm^?2 for 20 h) in 0.5 m H₂SO₄. The preparation process is appropriate for synthesizing various metal or metal phosphide@carbon electrocatalysts. This work may provide a biological template method for rational design and fabrication of various metals or metal compounds@carbon 3D electrodes with promising applications in energy conversion and storage.     

Single-Atom Co-Decorated MoS2 Nanosheets Assembled on Metal Nitride Nanorod Arrays as an Efficient Bifunctional Electrocatalyst for pH-Universal Water Splitting

The commercialization of electrochemical water splitting technology requires electrocatalysts that are cost-effective, highly efficient, and stable. Herein, an advanced bifunctional electrocatalyst based on single-atom Co-decorated MoS₂ nanosheets grown on 3D titanium nitride (TiN) nanorod arrays (CoSAs-MoS₂/TiN NRs) has been developed for overall water splitting in pH-universal electrolytes. When applied as a self-standing cathodic electrode, the CoSAs-MoS₂/TiN NRs requires overpotentials of 187.5, 131.9, and 203.4 mV to reach a HER current density of 10 mA cm^–2 in acidic, alkaline, and neutral conditions, respectively, which are superior to the most previously reported non-noble metal HER electrocatalysts at the same current density. The CoSAs-MoS₂/TiN NRs anodic electrode also shows low OER overpotentials of 454.9, 340.6, and 508.0 mV, respectively, at a current density of 10 mA cm^–2 in acidic, alkaline, and neutral mediums, markedly outperforming current OER catalysts reported elsewhere. More importantly, an electrolyzer delivered from the cathodic and anodic CoSAs-MoS₂/TiN NRs electrodes exhibits an extraordinary overall water splitting performance with good stability and durability in pH-universal conditions.     

A Cobalt‐Based Amorphous Bifunctional Electrocatalysts for Water‐Splitting Evolved from a Single‐Source Lazulite Cobalt Phosphate

Over the years, cobalt phosphates (amorphous or crystalline) have been projected as one of the most significant and promising classes of nonprecious catalysts and studied exclusively for the electrocatalytic and photocatalytic oxygen evolution reaction (OER). However, their successful utilization of hydrogen evolution reaction (HER) and the reaction of overall water‐splitting is rather unexplored. Herein, presented is a crystalline cobalt phosphate, Co₃(OH)₂(HPO₄)₂, structurally related to the mineral lazulite, as an efficient precatalyst for OER, HER, and water electrolysis in alkaline media. During both electrochemical OER and HER, the Co₃(OH)₂(HPO₄)₂ nanostructure was completely transformed in situ into porous amorphous CoO_x (OH) films that mediate efficient OER and HER with extremely low overpotentials of only 182 and 87 mV, respectively, at a current density of 10 mA cm^?2. When assemble as anode and cathode in a two‐electrode alkaline electrolyzer, unceasing durability over 10 days is achieved with a final cell voltage of 1.54 V, which is superior to the recently reported effective bifunctional electrocatalysts. The strategy to achieve more active sites for oxygen and hydrogen generation via in situ oxidation or reduction from a well‐defined inorganic material provides an opportunity to develop cost‐effective and efficient electrocatalysts for renewable energy technologies.     

Cobalt‐Doping in Molybdenum‐Carbide Nanowires Toward Efficient Electrocatalytic Hydrogen Evolution

Efficient hydrogen evolution reaction (HER) over noble‐metal‐free electrocatalysts provides one of the most promising pathways to face the energy crisis. Herein, facile cobalt‐doping based on Co‐modified MoO_x–amine precursors is developed to optimize the electrochemical HER over Mo₂C nanowires. The effective Co‐doping into Mo₂C crystal structure increases the electron density around Fermi level, resulting in the reduced strength of Mo–H for facilitated HER kinetics. As expected, the Co‐Mo₂C nanowires with an optimal Co/Mo ratio of 0.020 display a low overpotential (η₁₀ = 140 and 118 mV for reaching a current density of –10 mA cm^?2; η₁₀₀ = 200 and 195 mV for reaching a current density of –100 mA cm^?2), a small Tafel slope (39 and 44 mV dec^?1), and a low onset overpotential (40 and 25 mV) in 0.5 m H₂SO₄ and 1.0 m KOH, respectively. This work highlights a feasible strategy to explore efficient electrocatalysts via engineering on composition and nanostructure.     

Bifunctional Nickel Phosphide Nanocatalysts Supported on Carbon Fiber Paper for Highly Efficient and Stable Overall Water Splitting

Self‐supported electrodes comprising carbon fiber paper (CP) integrated with bifunctional nickel phosphide (Ni‐P) electrocatalysts are fabricated by electrodeposition of Ni on functionalized CP, followed by a convenient one‐step phosphorization treatment in phosphorus vapor at 500 °C. The as‐fabricated CP@Ni‐P electrode exhibits excellent electrocatalytic performance toward hydrogen evolution in both acidic and alkaline solutions, with only small overpotentials of 162 and 250 mV, respectively, attaining a cathodic current density of 100 mA cm^?2. Furthermore, the CP@Ni‐P electrode also exhibits superior catalytic performance toward oxygen evolution reaction (OER). An exceptionally high OER current of 50.4 mA cm^?2 is achieved at an overpotential of 0.3 V in 1.0 m KOH. The electrode can sustain 10 mA cm^?2 for 180 h with only negligible degradation, showing outstanding durability. Detailed microstructural and compositional studies reveal that upon OER in alkaline solution the surface Ni‐P is transformed to NiO covered with a thin Ni(OH)_x layer, forming a Ni‐P/NiO/Ni(OH)_x heterojunction, which presumably enhances the electrocatalytic performance for OER. Given the well‐defined bifunctionality, a full alkaline electrolyzer is constructed using two identical CP@Ni‐P electrodes as cathode and anode, respectively, which can realize overall water splitting with efficiency as high as 91.0% at 10 mA cm^?2 for 100 h.     

Mechanistic Insights on Ternary Ni2−xCoxP for Hydrogen Evolution and Their Hybrids with Graphene as Highly Efficient and Robust Catalysts for Overall Water Splitting

Searching the high‐efficient, stable, and earth‐abundant electrocatalysts to replace the precious noble metals holds the promise for practical utilizations of hydrogen and oxygen evolution reactions (HER and OER). Here, a series of highly active and robust Co‐doped nickel phosphides (Ni_2?xCo_xP) catalysts and their hybrids with reduced graphene oxide (rGO) are developed as bifunctional catalysts for both HER and OER. The Co‐doping in Ni₂P and their hybridization with rGO effectively regulate the catalytic activity of the surface active sites, accelerate the charge transfer, and boost their superior catalytic activity. Density functional theory calculations show that the Co‐doped catalysts deliver the moderate trapping of atomic hydrogen and facile desorption of the generated H₂ due to the H‐poisoned surface active sites of Ni_2?xCo_xP under the real catalytic process. Electrochemical measurements reveal the high HER efficiency and durability of the NiCoP/rGO hybrids in electrolytes with pH 0–14. Coupled with the remarkable and robust OER activity of the NiCoP/rGO hybrids, the practical utilization of the NiCoP/rGO‖NiCoP/rGO for overall water splitting yields a catalytic current density of 10 mA cm^?2 at 1.59 V over 75 h without an obvious degradation and Faradic efficiency of ≈100% in a two‐electrode configuration and 1.0 m KOH.     

Bifunctional Heterostructure Assembly of NiFe LDH Nanosheets on NiCoP Nanowires for Highly Efficient and Stable Overall Water Splitting

3D hierarchical heterostructure NiFe LDH@NiCoP/NF electrodes are prepared successfully on nickel foam with special interface engineering and synergistic effects. This research finds that the as‐prepared NiFe LDH@NiCoP/NF electrodes have a more sophisticated inner structure and intensive interface than a simple physical mixture. The NiFe LDH@NiCoP/NF electrodes require an overpotential as low as 120 and 220 mV to deliver 10 mA cm^?2 for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in 1 m KOH, respectively. Tafel and electrochemical impedance spectroscopy further reveal a favorable kinetic during electrolysis. Specifically, the NiFe LDH@NiCoP/NF electrodes are simultaneously used as cathode and anode for overall water splitting, which requires a cell voltage of 1.57 V at 10 mA cm^?2. Furthermore, the synergistic effect of the heterostructure improves the structural stability and promotes the generation of active phases during HER and OER, resulting in excellent stability over 100 h of continuous operation. Moreover, the strategy and interface engineering of the introduced heterostructure can also be used to prepare other bifunctional and cost‐efficient electrocatalysts for various applications.     

Bimetal Schottky Heterojunction Boosting Energy‐Saving Hydrogen Production from Alkaline Water via Urea Electrocatalysis

Hydrogen production via water electrocatalysis is limited by the sluggish anodic oxygen evolution reaction (OER) that requires a high overpotential. In response, a urea‐assisted energy‐saving alkaline hydrogen‐production system has been investigated by replacing OER with a more oxidizable urea oxidation reaction (UOR). A bimetal heterostructure CoMn/CoMn₂O₄ as a bifunctional catalyst is constructed in an alkaline system for both urea oxidation and hydrogen evolution reaction (HER). Based on the Schottky heterojunction structure, CoMn/CoMn₂O₄ induces self‐driven charge transfer at the interface, which facilitates the absorption of reactant molecules and the fracture of chemical bonds, therefore triggering the decomposition of water and urea. As a result, the heterostructured electrode exhibits ultralow potentials of ?0.069 and 1.32 V (vs reversible hydrogen electrode) to reach 10 mA cm^?2 for HER and UOR, respectively, in alkaline solution, and the full urea electrolysis driven by CoMn/CoMn₂O₄ delivers 10 mA cm^?2 at a relatively low potential of 1.51 V and performs stably for more than 15 h. This represents a novel strategy of Mott–Schottky hybrids in electrocatalysts and should inspire the development of sustainable energy conversion by combining hydrogen production and sewage treatment.