High-efficiency W-band GaAs monolithic frequency multipliers

High efficiency monolithic frequency multipliers have been designed, fabricated, and tested in the W-band. In microwave monolithic integrated circuits (MMICs), transmission lines with various impedances are used not only to transfer the input and output signals, but also to match the impedances of active devices to those of the input and output ports, with open and/or short stubs. Thus, loss in the transmission lines is one of the major limiting factors on circuit efficiencies. This paper presents high-efficiency MMIC frequency doublers with a balanced pair of GaAs Schottky barrier planar diodes operating in the W-band. The geometries of transmission lines were optimized to reduce the loss and thus to improve the efficiency. The demonstrated efficiency of 36.1% is the highest efficiency reported for a diode-based MMIC frequency multiplier in the W-band.     

一种新研制的W频段固态GaN功率放大器毫米波源

介绍了一种新研制的W频段固态GaN功率放大器毫米波源,给出了系统组成与工作原理,提供了其主要部件W频段固态Gunn驱动源、W频段波导-微带转换器、主放大器芯片基本性能及实验测试结果。该固态毫米波源工作频率94 GHz,输出连续波功率大于300 mW,线性增益10 dB,附加效率(PAE)大于16%。在W频段固态毫米波源研制过程中,其单片微波集成电路(MMIC)功率放大器半导体材料选择经历了GaAs、InP到GaN演变,结果清楚表明, W频段毫米波源的GaN MMlC功率放大器输出功率、增益、效率、高温性能要优于其他固态MMIC功率放大器性能。 W频段大功率固态GaN MMlC技术将在毫米波领域带来新的技术革命和应用。     

W及以上波段MMIC放大器的研究进展

在阐述W及以上波段MMIC放大器性能的基础上,回顾了以InP HEMT MMIC放大器为主流技术的W及以上波段MMIC放大器的研究进展,介绍了基于InP HBT、GaAs MHEMT和SbHEMT的MMIC放大器的研制水平,指出目前研制的W及以上波段MMIC放大器的应用领域,突显其在MMIC高端技术领域的重要性.针对欧美国家在该领域飞速发展而我国处于相对劣势的现状,对我国研发W及以上波段MMIC放大器提出初步建议.     

Metamorphic HEMT MMICs and Modules for Use in a High-Bandwidth 210 GHz Radar

In this paper, we present the development of advanced W-band and G-band millimeter-wave monolithic integrated circuits (MMICs) and modules for use in a high-resolution radar system operating at 210 GHz. A W-band frequency multiplier by six as well as a subharmonically pumped 210 GHz dual-gate field-effect transistor (FET) mixer and a 105 GHz power amplifier circuit have been successfully realized using our 0.1 mum InAlAs/InGaAs based depletion-type metamorphic high electron mobility transistor (mHEMT) technology in combination with grounded coplanar circuit topology (GCPW). Additionally, a 210 GHz low-noise amplifier MMIC was fabricated using our advanced 0.05 mum mHEMT technology. To package the circuits, a set of waveguide-to-microstrip transitions has been realized on 50 mum thick quartz substrates, covering the frequency range between 75 and 220 GHz. The presented millimeter-wave components were developed for use in a novel 210 GHz radar demonstrator COBRA-210, which delivers an instantaneous bandwidth of 8 GHz and an outstanding spatial resolution of 1.8 cm.     

Power-amplifier modules covering 70-113 GHz using MMICs

A set of W-band power amplifier (PA) modules using monolithic microwave integrated circuits (MMICs) have been developed for the local oscillators of the far-infrared and sub-millimeter telescope (FIRST). The MMIC PA chips include three driver and three PAs, designed using microstrip lines, and another two smaller driver amplifiers using coplanar waveguides, covering the entire W-band. The highest frequency PA, which covers 100-113 GHz, has a peak power of greater than 250 mW (25 dBm) at 105 GHz, which is the best output power performance for a monolithic amplifier above 100 GHz to date. These monolithic PA chips are fabricated using 0.1-μm AlGaAs/InGaAs/GaAs pseudomorphic T-gate power high electron-mobility transistors on a 2-mil GaAs substrate. The module assembly and testing, together with the system applications, is also addressed in this paper     

A W-band subharmonically pumped monolithic GaAs-based HEMT gate mixer

A W-band high electron mobility transistor (HEMT) subharmonically pumped (SHP) gate mixer is designed with fixed LO frequency operation. it is fabricated on a 4-mil substrate using 0.15-/spl mu/m GaAs pHEMT monolithic microwave integrated circuit (MMIC) process. the on-wafer measurement results show that the best conversion loss is about 4.7 dB in the W-band, as a 11-dbm 42-GHz low observable (LO) signal is pumped. To our knowledge, this is the first result on low conversion-loss W-band MMIC SHP HEMT gate mixer.     

A flip-chip packaged coplanar 94 GHz amplifier module with efficient suppression of parasitic substrate effects

A flip-chip mounted W-band amplifier module with more than 15 dB gain between 82 and 105 GHz has been developed, based on a 0.15 /spl mu/m GaAs PHEMT technology. To predict the influence of the flip-chip transition, an equivalent circuit model of the flip-chip interconnects was developed. Lossy silicon (n-Si) flip-chip carriers were used to successfully minimize parasitic substrate modes and feed back effects. The flip-chip assembled coplanar 94 GHz amplifier MMIC was packaged in a WR-10 waveguide mount, using CPW-to-waveguide transitions realized on quartz substrates.     

86.5GHz下输出功率257mW的 W波段GaN MMIC放大器

我们报道了一个三级W波段GaN MMIC功率放大器。考虑到W波段MMIC的耦合效应,所有的匹配电路和偏置电路都是先进行电路仿真以后,再用3D电磁场仿真软件进行系统的仿真。此MMIC功率放大器在频率为86.5GHz下输出功率能达到257mW,相应的功率附加效率(PAE)为5.4%,相应的功率增益为6.1dB。功率密度为459 mW/mm。另外,此MMIC功率放大器在83 GHz到90 GHz带宽下有100mW以上的输出功率。以上特性都是在漏极电压为12V时测试得到。     

InAlAs/InGaAs/InP基PHEMTs小信号建模及低噪声应用

利用改进的小信号模型对采用100nmInAlAs/InGaAs/InP工艺设计实现的PHEMTs器件进行建模, 并设计实现了一款W波段单片低噪声放大器进行信号模型的验证。为了进一步改善信号模型低频S参数拟合差的精度, 该小信号模型考虑了栅源和栅漏二极管微分电阻, 在等效电路拓扑中分别用Rfs和Rfd表示.为了验证模型的可行性, 基于该信号模型研制了W波段低噪声放大器单片.在片测试结果表明:最大小信号增益为14.4dB@92.5GHz, 3dB带宽为25GHz@85-110GHz.而且, 该放大器也表现出了良好的噪声特性, 在88GHz处噪声系数为4.1dB, 相关增益为13.8dB.与同频段其他芯片相比, 该放大器单片具有宽3dB带宽和高的单级增益.     

W-band InP HEMT MMICs using finite-ground coplanar waveguide(FGCPW) design

In this paper, we report on the development of W-band monolithic microwave integrated circuit (MMIC) power amplifiers using 0.1-μm AlInAs/GaInAs/InP high electron mobility transistor (HEMT) technology and finite-ground coplanar waveguide (FGCPW) designs. In the device modeling, the Angelov nonlinear HEMT model was employed to predict the large signal performance of the device, and the results were validated by using state-of-the-art vector load-pull measurements. A two-stage single-ended W-band FGCPW MMIC using a 150-μm-wide HEMT as the driver and a 250-μm-wide HEMT for the output stage was designed, fabricated, and tested. The MMIC amplifier demonstrates a maximum output power of 18.6 dBm with 18.2% power-added efficiency and 10.6 dB associated gain at 94 GHz. This result is the best output power to date reported from an InP-based MMIC using FGCPW design at this frequency     

W频段机场异物探测雷达收发前端

主要介绍了一种用于机场异物探测雷达的W频段调频连续波( FMCW)收发前端的研究工作。基于波导T形接头的等效计算公式,对W频段波导合成电路进行了集中参数的电路建模,通过优化设计波导合成电路的参数,提高了波导合成电路的容差特性,解决了W频段波导功率合成电路加工精度要求高的问题,实现了W频段4路功率合成;采用低损耗的石英基材设计开发了微带薄膜滤波器技术,实现了W频段FMCW雷达接收前端的一体化集成设计;通过对低噪声放大器芯片键和金丝的匹配设计,实现了W频段收发前端的低噪声接收。最终实现的W频段FMCW收发前端的发射功率优于360 mW,接收机噪声系数优于5 dB。研制的收发前端为W频段FMCW雷达提供了一种有效的射频前端的解决方案。     

Coplanar millimeter-wave ICs for W-band applications using 0.15μm pseudomorphic MODFETs

A small signal S-parameter and noise model for the cascode MODFET has been validated up to 120 GHz, allowing predictable monolithic microwave integrated circuit (MMIC) design up to W-band. The potential of coplanar waveguide technology to build compact, high performance system modules is demonstrated by means of passive and active MMIC components. The realized passive structures comprise a Wilkinson combiner/divider and a capacitively loaded ultra miniature branch line coupler. For both building blocks, very good agreement between the measured and modeled data is achieved up to 120 GHz. Based on the accurate design database, two versions of compact integrated amplifiers utilizing cascode devices for application in the 90-120 GHz frequency range were designed and fabricated. The MMICs have 26.3 dB and 20 dB gain at 91 GHz and 110 GHz, respectively. A noise figure of 6.4 dB was measured at 110 GHz. The 90-100 GHz amplifier was integrated with an MMIC tunable oscillator resulting in a W-band source delivering more than 6 dBm output power from 94 to 98 GHz     

Low phase noise millimeter-wave frequency sources using InP-basedHBT MMIC technology

A family of millimeter-wave sources based on InP heterojunction bipolar transistor (HBT) monolithic microwave/millimeter-wave integrated circuit (MMIC) technology has been developed. These sources include 40-GHz, 46-GHz, 62-GHz MMIC fundamental mode oscillators, and a 95-GHz frequency source module using a 23.8-GHz InP HBT MMIC dielectric resonator oscillator (DRO) in conjunction with a GaAs-based high electron mobility transistor (HEMT) MMIC frequency quadrupler and W-band output amplifiers. Good phase noise performance was achieved due to the low 1/f noise of the InP-based HBT devices. To our knowledge, this is the first demonstration of millimeter-wave sources using InP-based HBT MMIC's     

W频段机场异物探测雷达收发前端

主要介绍了一种用于机场异物探测雷达的W频段调频连续波（FMCW）收发前端的研究工作。基于波导T形接头的等效计算公式,对W频段波导合成电路进行了集中参数的电路建模,通过优化设计波导合成电路的参数,提高了波导合成电路的容差特性,解决了W频段波导功率合成电路加工精度要求高的问题,实现了W频段4路功率合成;采用低损耗的石英基材设计开发了微带薄膜滤波器技术,实现了W频段FMCW雷达接收前端的一体化集成设计;通过对低噪声放大器芯片键和金丝的匹配设计,实现了W频段收发前端的低噪声接收。最终实现的W频段FMCW收发前端的发射功率优于360 mW,接收机噪声系数优于5 dB。研制的收发前端为W频段FMCW雷达提供了一种有效的射频前端的解决方案。     

Micromachined W-band filters

Results are presented for high performance planar W-band filters based on silicon micromachining techniques common in microsensor fabrication. Two types of micromachined planar transmission lines are studied: microshield line and shielded membrane microstrip (SMM) line. In both of these structures, the conducting lines are suspended on thin dielectric membranes. These transmission lines are essentially “floating” in air, possess negligible levels of dielectric loss, and do not suffer from the parasitic effects of radiation and dispersion. A 90 GHz low pass filter and several 95 GHz bandpass filters are tested and display excellent performance which cannot be achieved with traditional substrate supported circuits in CPW or microstrip configurations. A full-wave finite-difference time-domain (FDTD) technique verifies the measured performance of the W-band circuits and provides a basis for comparison between the performances of membrane supported circuits and equivalent substrate supported circuits     

High-Performance 94-GHz Single-Balanced Diode Mixer Using Disk-Shaped GaAs Schottky Diodes

We present a high-performance 94-GHz single-balanced monolithic millimeter-wave integrated-circuit (MMIC) mixer using the disk-shaped GaAs Schottky diodes grown on an n/$hbox{n}+$ epitaxial structure. Due to the superior characteristics of the GaAs diodes with high diode-to-diode uniformity, the mixer shows a conversion loss of 5.5 dB at 94 GHz, a 1-dB compression point $(P_{1 hbox{-}{rm dB}})$ of 5 dBm, and high local-oscillator to radio-frequency isolation above 30 dB in an RF frequency range of 91–97 GHz. To our knowledge, the fabricated mixer shows the best performance in terms of conversion loss at 94 GHz and $P_{1 hbox{-}{rm dB}}$ among the W-band MMIC mixers without amplifier circuits.      

微波单片集成电路的成品率优化

采用建立管芯等效电路模型、灵敏度分析以及统计勘探法对微波单片集成电路进行成品率优化，并编制了软件，加入到ＧａＡｓＩＣＣＡＤ系统中。应用该软件对Ｘ波段低噪声ＭＭＩＣ、超宽带ＭＭＩＣ放大器进行了设计，成品率有较大的提高，电路性能有所改善。     

A W-band source module using MMIC's

A W-band source module providing 4-GHz tuning bandwidth (92.5-96.5 GHz) has been developed. This module consists of three MMIC chips: a 23.5 GHz HBT VCO, a 23.5-94 GHz HEMT frequency quadrupler and a W-band three-stage HEMT output amplifier, all fabricated in TRW production lines. It exhibits a measured output power of 3 dBm at 94-95 GHz and a 3-dB tuning bandwidth greater than 3 GHz, with a phase noise of -92 dBc/Hz at 1 MHz offset. This work demonstrates a new and efficient way to implement high performance W-band source. Its wide tuning bandwidth with good phase noise performance, as well as design simplicity, makes this approach attractive for many W-band system applications     

基于InP HBT工艺的高功率高谐波抑制W波段宽带八倍频器MMIC

基于0.7μm InP HBT工艺,设计实现了一种高功率高谐波抑制比的W波段倍频器MMIC。电路二倍频单元采用有源推推结构,通过3个二倍频器单元级联形成八倍频链,并在链路的输出端加入输出缓冲放大器,进一步提高倍频输出功率。常温25℃状态下,当输入信号功率为0 dBm时,倍频器MMIC在78.4~96.0 GHz输出频率范围内,输出功率大于10 dBm,谐波抑制度大于50 dBc。芯片面积仅为2.22 mm²,采用单电源+5 V供电。     

A 77-GHz MMIC power amplifier for automotive radar applications

A MMIC 77-GHz two-stage power amplifier (PA) is reported in this letter. This MMIC chip demonstrated a measured small signal gain of over 10 dB from 75 GHz to 80 GHz with 18.5-dBm output power at 1 dB compression. The maximum small signal gain is above 12 dB from 77 to 78 GHz. The saturated output power is better than 21.5 dBm and the maximum power added efficiency is 10% between 75 GHz and 78 GHz. This chip is fabricated using 0.1-/spl mu/m AlGaAs/InGaAs/GaAs PHEMT MMIC process on 4-mil GaAs substrate. The output power performance is the highest among the reported 4-mil MMIC GaAs HEMT PAs at this frequency and therefore it is suitable for the 77-GHz automotive radar systems and related transmitter applications in W-band.