Analysis of E-H plane tee junction using avariational formulation

A three-port equivalent network for an E-H plane tee junction is determined taking into account the effect of waveguide wall thickness and considering the contribution of the dominant mode to the imaginary part of the self-reaction. The parameters of the three-port equivalent network are determined. From a knowledge of the equivalent network parameters, the net impedance loading, reflection coefficient, and coupling are evaluated for an E-H plane tee junction. A comparison between theoretical and experimental results is also presented     

S matrix of slot-coupled H-plane tee junctionusing rectangular waveguides

Complex scattering matrix parameters of a slot-coupled, waveguide tee junction are determined using a moment method of analysis with entire orthogonal basis functions and a rigorous analysis of the effect of wall thickness. The variations of the equivalent network parameter, coupling, and return loss with frequency are evaluated, and the results are compared with experimental data. The unitary property of the S matrix is verified. The dependence of coupling on slot length, slot width, and thickness is presented     

Prediction of the E and H fields produced by theSwiss mobile EMP simulator (MEMPS)

The author discusses a simple analysis for determining the electromagnetic fields produced by the MEMPS simulator. A transmission line solution for the currents flowing on the simulator structure is obtained, taking into account both the resistive loading along the simulator and the dispersive nature of the earth under the simulator. Once the current distribution is determined, the fields at an arbitrary location are found by integrating the fields produced by an electric current element located over the lossy air-earth interface. Using this model, a procedure for estimating the fields at an arbitrary location within the simulator is described. This requires a knowledge of the primary transient E and H field components at a reference point near the simulator, or equivalently, a knowledge of the incident E or H field at this point. Results of this study indicate that it is possible to predict the simulator fields at other points, based on the reference fields and the calculational model     

Robustness of mean E{X} and R charts

The effect of nonnormality on E{X} and R charts is reported. The effect of departure from normality can be examined by comparing the probabilities that E{X} and R lie outside their three-standard-deviation and two-standard-deviation control limits. Tukey's λ-family of symmetric distributions is used because it contains a wide spectrum of distributions with a variety of tail areas. The constants required to construct E{X} and R charts for the λ-family are computed. Control charts based on the assumption of normality give inaccurate results when the tails of the underlying distribution are thin or thick. The validity of the normality assumption is examined by using a numerical example     

Closest coset decoding of |u|u+v| codes

The general concept of closest coset decoding (CCD) is presented, and a soft-decoding technique for block codes that is based on partitioning a code into a subcode and its cosets is described. The computational complexity of the CCD algorithm is significantly less than that required if a maximum-likelihood detector (MLD) is used. A set-partitioning procedure and details of the CCD algorithm for soft decoding of |u|u+v| codes are presented. Upper bounds on the bit-error-rate (BER) performance of the proposed algorithm are combined, and numerical results and computer simulation tests for the BER performance of second-order Reed-Muller codes of length 16 and 32 are presented. The algorithm is a suboptimum decoding scheme and, in the range of signal-to-noise-power-density ratios of interest, its BER performance is only a few tenths of a dB inferior to the performance of the MLD for the codes examined     

Analysis of coplanar E-H planeT-junction using dissimilar rectangular waveguides

An analysis of a T-junction that differs from conventional H -plane T-junctions in that the T arm is rotated by 90° and coupling takes place through an inclined slot is presented. Since use of standard X-band waveguides results in such a T-junction operating above 11.7 GHz, nonstandard waveguide dimensions have been considered to bring down the operating frequency to 9.375 GHz. The effect of a change of the broad dimension of the primary feed waveguide on the resonant conductance is evaluated. The variations of resonant length with the angle of inclination of the slot, and coupling with frequency, are presented     

H-polarization diffraction by a thick metal-dielectricjoin

An analysis is presented of the H-polarization diffraction due to a material discontinuity formed by the junction of a thick dielectric half-plane with a metallic half-plane having the same thickness. This is accomplished by first considering the solution of several subproblems. These include the direct diffraction and coupling due to a plane wave incident on a loaded open-ended parallel plate waveguide and radiation and reflection by a waveguide mode. The final solution for diffraction by the metal-dielectric join is obtained by introducing a perfectly conducting stub within the loaded guide and subsequently using the generalized scattering matrix formulation with the stub brought to the waveguide opening. All the analysis relating to the subproblems is done by the dual integral equation approach. As expected, the final expressions involve several Wiener-Hopf split functions which are evaluated numerically or analytically     

Two chi-square statistics for determining the orders p andq of an ARMA (p, q) process

The &thetas;, λ, and η functions have been previously proposed for use in choosing the autoregressive and moving-average orders of an ARMA (q, p) process visually. Two chi-square statistics associated with these three functions are presented and used here to determine the orders of an ARMA process statistically. It is shown that the two statistics are asymptotically equivalent to the Quenouille-Walker's goodness-of-fit test statistic, which is a Lagrange multiplier test statistic. Some numerical examples are presented to illustrate the usefulness of the two chi-square statistics as well as the three functions in ARMA modeling     

Gain measurements on the KrF(B→X), XeF(B→X), and XeF(C→A) lasertransitions in an XeF(C→A) laser gas mixture

Optimum energy extraction from an electron-beam-pumped XeF(C →A) laser is achieved with a five-component rare gas halide mixture. The characterization and modeling of laser action in such a gas mixture requires a knowledge of small-signal gain and absorption coefficients not only on the blue-green XeF(C→ A) transition, but also in the ultraviolet (UV) region for the competing XeF(B→X) and KrF(B→X ) transitions. The authors report gain measurements on the XeF(C→A) transition and small-signal gain and absorption coefficients at or near both the XeF(B→X ) (351 and 353 nm) and KrF(B→X) (248 nm) transitions. A study of the gain for the UV and visible transitions as a function of Kr and Xe partial pressure is reported, and its impact on the XeF(C→A) kinetics is discussed     

H-field and J-current singularities at sharpedges in printed circuits

The magnetic field and related current density behavior on the surface of printed conductors with a polygonal contour used in MIC (microwave integrated circuit) components and antennas are investigated. From the rigorous E solution for the plane sector perfect conductor, the H singular solution is determined. The authors formulate a convenient singularity function that just represents the boundary conditions and the singularity distributed along the conductor edge. The singularity function is explicitly reported for the commonly encountered 90° and 270° plane sectors and 90° bitriangular antenna, and its systematic generalization is indicated for sectors of arbitrary aperture and composite configurations and polygonal path     

G/T and noise figure of active array antennas

A figure of merit, G/T, for a multichannel active array antenna was derived, and the effects of the beamforming network on the overall noise figure of the system were studied. Also examined are the dependence of the noise figure on various losses, and the difference between a resistive and nonresistive taper in the combining network. When the amplifier gain is sufficiently large, the losses following the LNA can usually be ignored. For a photonic array with lossy time shift elements, however, the downstream losses become significant. Also, if resistive tapering is employed, not only the array gain but also the noise figure will be degraded by the collective effect of the feed network     

I and Q decomposition of self-noise in square-lawclock regenerators

A method for obtaining power spectra for the self-noise components in phase and in quadrature to the desired generated clock signal for PAM systems is described. A previously recognized cross spectrum is also discussed. Results can be expressed either in a closed form or as the sum of rapidly convergent series, depending on the signalling waveform used. A computation of the in-phase and quadrature spectra for Nyquist pulses for excess bandwidth factors ranging from 0.1-0.9 is included, along with demonstration showing that for signalling waveforms with even or odd symmetry, cross power spectrum is zero at all frequencies. It is also shown that if the cross power spectrum is not zero due to asymmetry in the signalling waveform, sampling keyed to other than zero-crossing of the timing wave can give a lower timing jitter     

On (k, t)-subnormal covering codes

The concept of a (k, t)-subnormal covering code is defined. It is discussed how an amalgamated-direct-sumlike construction can be used to combine such codes. The existence of optimal (q, n, M) 1 codes C is discussed such that by puncturing the first coordinate of C one obtains a code with (q, 1)-subnorm 2     

The performance of depressed-cladding single-mode fibers withdifferent b/a ratios

Depressed-cladding single-mode fibers with a first cladding-to-core ratio (b/a) ranging from seven to one and relative refractive-index differences of the core from 0.25 to 0.35% and of the cladding from 0 to -0.2% are investigated experimentally with respect to the LP₁₁ mode cutoff properties, the mode-field diameter, the dispersion, and the bending attenuation. Numerical calculations based on actual profile parameters of the bend loss and the mode-field diameter agree well with experiment. It is demonstrated that low attenuation and bend losses independent of b/a can be obtained if the cutoff wavelength is kept constant by adjusting the core radius, the core index or the index of the first cladding     

Theory of an efficient N×N passive opticalstar coupler

A method for configuring an efficient N×N optical passive star coupler is introduced. It makes the construction of a one-piece coupler possible and thus eliminates the excess loss problem associated with cascade couplers and reduces the structural complexity. The authors show that a 100% efficiency figure can be achieved through the entire array by using a properly designed space-varying refractive-index slab. The authors give a mathematical analysis of the space-varying refractive-index slab and examine spatial frequencies of the required refractive-index pattern. The authors demonstrate how the wave-mixing method can be utilized as one possible method of configuring such a slab, using a constant temporal optical frequency involving nonlinear media such as photorefractive crystals     

Improved theory for E-plane symmetrical tee junctions

L. Lewin's theory (1975), which describes an E-plane symmetrical tee junction by an equivalent circuit with only three parameters, is examined. It is shown that although the theory is formally correct, its circuit parameters depend on the amplitudes of reflected waves. An improved theory corrects this fault     

A nonsorting VLSI structure for implementing the (M, L) algorithm

A nonsorting structure for implementing the (M, L) algorithm is presented. The processing is based on a survivor selection operation that incorporates parallelism and has an execution time proportional to the product of the logarithm of bM (the number of contender paths), and k (the number of bits used for path metrics). Aside from the path extender(s), the processor area is only a small fraction of the total chip area; most is simply for required storage of path histories and metrics. This means that the structure can support a large M on a single chip. In addition, the structure can be extended to larger M by stacking rows of a few different types of custom chips     

Order N log2 N WHT/DHT algorithm

An efficient algorithm is proposed which computes the coefficients of the higher order discrete Hartley transform (DHT) directly from the coefficients of lower-order DHTs. With this new development, the two-stage Walsh-Hadamard transform/discrete Hartley transform (WHT/DHT) is comparable to the existing fast algorithms. The same approach can also be used for the computation of DCT coefficients     

Overshoot-controlled RLC interconnections

How overshoot in the step response of a circuit involving an RLC line can be controlled using a combination of driver and line resistance that depends on the load capacitance is shown. The no-peak condition or its equivalent is used to relate line parameters to the driver and load impedances. This no-peak condition generalizes the impedance matching customarily used for lossless lines, i.e. it provides an alternative to the traditional choice R_D=√ L/C. The results allow improved circuit response without risk of overshoot, for example, by reduction of driver resistance below √L/C for cases where line resistance is unavoidable and/or where load capacitance is not negligible compared to line capacitance. The algebraic formulas derived are more effective than case-by-case numerical simulations for analyzing scaling and technology issues, whether on-chip, or at the packaging, board, or system levels     

The importance of the n-base in p-n-p-n-like structures subjectedto dV/dt ramps

A simple yet thorough analysis of physical effects induced in p-n-p-n-like silicon structures by the high rate of the OFF-state forward anode voltage rise (dV/dt) is discussed. The importance of n-base parameters in shaping the faulty triggering of thyristors subjected to dV/dt ramps is clearly demonstrated. The main implications of the findings for thyristor physics and design are also outlined