Biosorption of copper (II) onto immobilized cells of Pycnoporus sanguineus from aqueous solution: equilibrium and kinetic studies

The ability of white-rot fungus, Pycnoporus sanguineus to adsorb copper (II) ions from aqueous solution is investigated in a batch system. The live fungus cells were immobilized into Ca-alginate gel to study the influence of pH, initial metal ions concentration, biomass loading and temperature on the biosorption capacity. The optimum uptake of Cu (II) ions was observed at pH 5 with a value of 2.76mg/g. Biosorption equilibrium data were best described by Langmuir isotherm model followed by Redlich-Peterson and Freundlich models, respectively. The biosorption kinetics followed the pseudo-second order and intraparticle diffusion equations. The thermodynamic parameters enthalpy change (10.16kJ/mol) and entropy change (33.78J/molK) were determined from the biosorption equilibrium data. The FTIR analysis showed that OH, NH, CH, CO, COOH and CN groups were involved in the biosorption of Cu (II) ions onto immobilized cells of P. sanguineus. The immobilized cells of P. sanguineus were capable of removing Cu (II) ions from aqueous solution.     

Study of Cu(II) biosorption by dried activated sludge: effect of physico-chemical environment and kinetics study

Biosorption is a recent technology used to remove heavy metal ions from aqueous solutions. The biosorption of copper ions from aqueous solution by dried activated sludge was investigated in batch systems. Effect of solution pH, initial metal concentration and particle size range were determined. The suitable pH and temperature for studied conditions were determined as 4.0 and 20 °C, respectively. The theoretical max biosorption capacity of activated sludge was 294 mg g⁻¹ at 20 °C for <0.063 mm particle size. The equilibrium data fitted very well to both Langmuir and Freundlich isotherm models. The pseudo first and second-order kinetic models were used to describe the kinetic data. The experimental data fitted to second-order kinetic model. The particle size and initial metal concentration were effected the biosorption capacity of dried activated sludge. An increase in the initial metal concentration increases of biosorption capacity, which also increases with decreasing particle size. Dried activated sludge has different functional groups according to the FT-IR results.     

Potential of Sargassum wightii biomass for copper(II) removal from aqueous solutions: application of different mathematical models to batch and continuous biosorption data

This paper reports biosorption of copper(II) ions onto Sargassum wightii biomass in batch and continuous mode of operation. Batch experiments were fundamentally aimed to determine the favorable pH for copper(II) biosorption. Langmuir model was used to describe the copper(II) biosorption isotherm and maximum uptake of 115 mg/g was obtained at pH 4.5. Continuous experiments in a packed column (2 cm i.d. and 35 cm height) were performed to study the influence of bed height, flow rate and inlet solute concentration on copper(II) biosorption. The highest bed height (25 cm), lowest flow rate (5 ml/min) and highest inlet Cu(II) concentration (100 mg/l) resulted in highest copper(II) uptake of 52.6 mg/g, compared to other conditions examined. Column data obtained at different conditions were described using the Thomas, Yoon-Nelson and modified dose-response models. All three models were able to predict breakthrough curves; in particular, the breakthrough curve prediction by the Thomas and Yoon-Nelson models were found to be very satisfactory. Also, the well-established design model, the Bed depth-service time (BDST) model was used to analyze the experimental data. The BDST model plot at 5 ml/min (flow rate) and 100 mg/l (inlet solute concentration) was used to predict bed depth-service time data at different conditions. The BDST model predicted values always coincide with experimental values with high correlation coefficients.     

Biosorption of chromate anions from aqueous solution by a cationic surfactant-modified lichen (Cladonia rangiformis (L.))

Biosorption has been appearing as a useful alternative to conventional treatment systems for the removal of toxic metals from aqueous stream. The batch removal of chromate anions (CrO(4)(2-)) from wastewater under different experimental conditions using a cationic surfactant-modified lichen (Cladonia rangiformis (L.)) was investigated in this study. Cetyl trimethyl ammonium bromide (CTAB) was used for biomass modification. The results of the experiments showed that biomass modification substantially improved the biosorption efficiency. Effects of pH, biosorption time, initial CrO(4)(2-) concentration, biosorbent dosage, and the existence of the surfactant on the biosorption of CrO(4)(2-) anions were studied. Studies up to date have shown that the biosorption efficiency of chromium increased as the pH of the solution decreased. In the present study, the removal of chromate anions from aqueous solutions at high pH values with surfactant-modified lichen was investigated. From the results of the experiments it was seen that the removal of chromate anions by modified lichen was 61% at the solution natural pH (pH 5.11) but at the same pH value the removal of chromate anions by unmodified lichen was 6%. Also concentrations ranging from 30 to 150 mg/L Cr(IV) were tested and the biosorptive removal efficiency of the metal ions from aqueous solution at high pH was achieved more than 98%.     

Biosorption of Pb(II) and Cd(II) from aqueous solution using green alga (Ulva lactuca) biomass

The biosorption characteristics of Pb(II) and Cd(II) ions from aqueous solution using the green alga (Ulva lactuca) biomass were investigated as a function of pH, biomass dosage, contact time, and temperature. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were applied to describe the biosorption isotherm of the metal ions by U. lactuca biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The monolayer biosorption capacity of U. lactuca biomass for Pb(II) and Cd(II) ions was found to be 34.7mg/g and 29.2mg/g, respectively. From the D-R isotherm model, the mean free energy was calculated as 10.4kJ/mol for Pb(II) biosorption and 9.6kJ/mol for Cd(II) biosorption, indicating that the biosorption of both metal ions was taken place by chemisorption. The calculated thermodynamic parameters (DeltaG degrees , DeltaH degrees and DeltaS degrees ) showed that the biosorption of Pb(II) and Cd(II) ions onto U. lactuca biomass was feasible, spontaneous and exothermic under examined conditions. Experimental data were also tested in terms of biosorption kinetics using pseudo-first-order and pseudo-second-order kinetic models. The results showed that the biosorption processes of both metal ions followed well pseudo-second-order kinetics.     

Biosorption of nickel and copper onto treated alga (Undaria pinnatifida): application of isotherm and kinetic models

Biosorption of nickel and copper ions from aqueous solution onto treated alga biomass Undaria pinnatifida has been studied and the Langmuir, Freundlich and Temkine equilibrium isotherms, pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetic model were determined respectively. Within the test range (initial concentration 5–50 mg/L, biosorption doze 0.1–0.5 g, pH 3–7), biosorption performance for metal ions showed an increase in specific metal uptake capacity with an increasing in initial ions concentration and decreasing in biosorbent doze. The optimized condition of pH value for nickel and copper is 4.7 and 4.0, respectively, while contact time is about 100 min. At equilibrium, the maximum total uptake by U. pinnatifida was 24.71 mg/g for nickel and 38.82 mg/g for copper. The results for nickel and copper fit well to the Langmuir and the Temkin isotherm, respectively. Pseudo-second-order model described well the sorption kinetic of nickel and copper ions in comparison to pseudo-first-order and intra-particle diffusion kinetic model.     

Biosorption of copper and lead ions by waste beer yeast

Locally available waste beer yeast, a byproduct of brewing industry, was found to be a low cost and promising adsorbent for adsorbing copper and lead ions from wastewater. In this work, biosorption of copper and lead ions on waste beer yeast was investigated in batch mode. The equilibrium adsorptive quantity was determined to be a function of the solution pH, contact time, beer yeast concentration, salt concentration and initial concentration of copper and lead ions. The experimental results were fitted well to the Langmuir and Freundlich model isotherms. According to the parameters of Langmuir isotherm, the maximum biosorption capacities of copper and lead ions onto beer yeast were 0.0228 and 0.0277 mmol g(-1) at 293 K, respectively. The negative values of the standard free energy change (DeltaG degrees ) indicate spontaneous nature of the process. Competitive biosorption of two metal ions was investigated in terms of sorption quantity. The amount of one metal ion adsorbed onto unit weight of biosorbent (q(e)) decreased with increasing the competing metal ion concentration. The binding capacity for lead is more than for copper. Ion exchange is probably one of the main mechanism during adsorptive process.     

Removal of Pb2+, Ag+, Cs+ and Sr2+ from aqueous solution by brewery's waste biomass

Heavy metal pollution is becoming a more and more serious environmental problem, posing threat to biota life. Biosorption is an alternative technology for the treatment of wastewater containing metal ions. In this paper, the removal of four metal ions, i.e., Pb2+, Ag+, Sr2+ and Cs+ by waste biomass of brewery was studied. The experimental results showed that metal uptake is a rapid process, which can be described by pseudosecond order kinetic model. The Langmuir adsorption isotherm was applied to correlate the equilibrium data and fitted quite well. The maximum biosorption capacities for four metal ions were 0.413 mmol Pb2+/g, 0.396 mmol Ag+/g, 0.091 mmol Sr2+/g and 0.076 mmol Cs+/g, respectively. The binding of metals was also discussed in term of several factors. The order of accumulated metal ions at equilibrium state on the molar basis was as follows: Pb2+>Ag+>Sr2+>Cs+, which positively correlated with their covalent index and electronegative and reversely correlated with dissociation constant.     

Pb(II) biosorption from hazardous aqueous streams using Gossypium hirsutum (Cotton) waste biomass

Studies on the biosorptive ability of Gossypium hirsutum (Cotton) waste biomass outlined that smaller size of biosorbent (0.355mm), higher biomass dose (0.20g), 5 pH and 100mg/L initial Pb(II) concentration were more suitable for enhanced Pb(II) biosorption from aqueous medium. The Langmuir isotherm model and pseudo second order kinetic model fitted well to the data of Pb(II) biosorption. Highly negative magnitude of Gibbs free energy (DeltaG degrees ) indicated that the process was spontaneous in nature. In addition to this surface coverage and distribution coefficient values of Pb(II) biosorption process were also determined. At optimized conditions Pb(II) uptake was more rapid in case of industrial effluents in comparison to synthetic solutions. FTIR spectroscopic analysis revealed that the main functional groups involved in the uptake of Pb(II) on the surface of G. hirsutum biomass were carboxyl, carbonyl, amino and alcoholic.     

Removal of Ni(II), Zn(II) and Cr(VI) from aqueous solution by Alternanthera philoxeroides biomass

Alternanthera philoxeroides biomass, a type of freshwater macrophyte, was used for the sorptive removal of Ni(II), Zn(II) and Cr(VI) from aqueous solutions. Variables of the batch experiments include solution pH, contact time, particle size and temperature. The biosorption capacities are significantly affected by solution pH. Higher pH favors higher Ni(II), Zn(II) removal, whereas higher uptake of Cr(VI) is observed as the pH is decreased. A two-stage kinetic behavior is observed in the biosorption of Ni(II), Zn(II) and Cr(VI): very rapid initial biosorption in a few minutes, followed by a long period of a slower uptake. It is noted that an increase in temperature results in a higher Ni(II), Zn(II) and Cr(VI) loading per unit weight of the sorbent. Decreasing the particle sizes of the Alternanthera philoxeroides biomass leads to an increase in the Ni(II), Zn(II) and Cr(VI) uptake per unit weight of the sorbent. All isothermal data are fairly well fitted with Langmuir equations. The thermodynamic parameter, DeltaG degrees, were calculated. The negative DeltaG degrees values of Cr(VI), Ni(II) and Zn(II) at various temperatures confirm the adsorption processes are spontaneous.     

Biosorption of heavy metals and uranium by starfish and Pseudomonas putida

Biosorption of heavy metals and uranium from contaminated wastewaters may represent an innovative purification process. This study investigates the removal ability of unit mass of Pseudomonas putida and starfish for lead, cadmium, and uranium by quantifying the adsorption capacity. The adsorption of heavy metals and uranium by the samples was influenced by pH, and increased with increasing Pb, Cd, and U concentrations. Dead cells adsorbed the largest quantity of all heavy metals than live cells and starfish. The adsorption capacity followed the order: U(VI)>Pb>Cd. The results also suggest that bacterial membrane cells can be used successfully in the treatment of high strength metal-contaminated wastewaters.     

Biosorption of cadmium(II), zinc(II) and lead(II) by Penicillium simplicissimum: Isotherms, kinetics and thermodynamics

The isotherms, kinetics and thermodynamics of Cd(II), Zn(II) and Pb(II) biosorption by Penicillium simplicissimum were investigated in a batch system. The effects of pH, initial metal ions concentration, biomass dose, contact time, temperature and co-ions on the biosorption were studied. Adsorption data were well described by both the Redlich–Peterson and Langmuir model. Chemical ion-exchange was found to be an important process based on free energy value from Dubini–Radushkevich isotherm for all metal ions. The results of the kinetic studies of all metal ions at different temperature showed that the rate of adsorption followed the pseudo second-order kinetics well. The thermodynamics constants ΔG°, ΔH° and ΔS° of the adsorption process showed that biosorption of Cd(II), Zn(II) and Pb(II) ions on Penicillium simplicissimum were endothermic and spontaneous.     

Ni(II) removal from aqueous solutions using cone biomass of Thuja orientalis

The biomass of terrestrial-plant materials has high removal capacities for a number of heavy metal ions. The Ni(II) biosorption capacity of the cone biomass of Thuja orientalis was studied in the batch mode. The biosorption equilibrium level was determined as a function of contact time, pH, temperature, agitation speed at several initial metal ion and adsorbent concentrations. The removal of Ni(II) from aqueous solutions increased with adsorbent concentration, temperature and agitation speed of the solution were increased. The biosorption process was very fast; 90% of biosorption occurred within 3 min and equilibrium was reached at around 7 min. It is found that the biosorption of Ni(II) on the cone biomass was correlated well (R2 > 0.99) with the Langmuir equation as compared to Freundlich, BET Temkin and D-R isotherm equation under the concentration range studied. According to Langmuir isotherm, the monolayer saturation capacity (Q(o)) is 12.42 mg g(-1). The pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models were applied to test the experimental data for initial Ni(II) and cone biomass concentrations. The pseudo-second-order kinetic model provided the best correlation of the used experimental data compared to the pseudo-first-order and intraparticle diffusion kinetic models. The activation energy of biosorption (E(a)) was determined as 36.85 kJ mol(-1) using the Arrhenius equation. This study indicated that the cone biomass of T. orientalis can be used as an effective and environmentally friendly adsorbent for the treatment of Ni(II) containing aqueous solutions.     

Comparison for adsorption modelling of copper and zinc from aqueous solution by Ulva fasciata sp

The removal of copper and zinc from aqueous solution by adsorption on Ulva fasciata sp. was studied, as a function of contact time and pH of the solution. Adsorption of copper and zinc on U. fasciata sp. was compared. It was shown that U. fasciata sp. has high metal removal efficiency. The maximum adsorption capacity of U. fasciata sp. for copper and zinc was 26.88 and 13.5mg/g, respectively. The adsorption of copper and zinc on U. fasciata sp. was increased with increase in pH from 2 to 5 and decreased with increase in pH from 5 to 10. The Freundlich and Langmuir model can describe the adsorption equilibrium of copper and zinc on U. fasciata sp. The Freundlich and Langmuir constants for adsorption of copper and zinc on U. fasciata sp. were determined.     

Utilization of fermentation waste (Corynebacterium glutamicum) for biosorption of Reactive Black 5 from aqueous solution

A fermentation waste, Corynebacterium glutamicum, was successfully employed as a biosorbent for Reactive Black 5 (RB5) from aqueous solution. This paper initially studied the effect of pretreatment on the biosorption capacity of C. glutamicum toward RB5, using several chemical agents, such as HCl, H(2)SO(4), HNO(3), NaOH, Na(2)CO(3), CaCl(2) and NaCl. Among these reagents, 0.1M HNO(3) gave the maximum enhancement of the RB5 uptake, exhibiting 195mg/g at pH 1 with an initial RB5 concentration of 500mg/l. The solution pH and temperature were found to affect the biosorption capacity, and the biosorption isotherms derived at different pHs and temperatures revealed that a low pH (pH 1) and high temperature (35 degrees C) favored biosorption. The biosorption isotherm was well represented using three-parameter models (Redlich-Peterson and Sips) compared to two-parameter models (Langmuir and Freundlich models). As a result, high correlation coefficients and low average percentage error values were observed for three-parameter models. A maximum RB5 uptake of 419mg/g was obtained at pH 1 and a temperature of 35 degrees C, according to the Langmuir model. The kinetics of the biosorption process with different initial concentrations (500-2000mg/l) was also monitored, and the data were analyzed using pseudo-first and pseudo-second order models, with the latter describing the data well. Various thermodynamic parameters, such as DeltaG degrees, DeltaH degrees and DeltaS degrees, were calculated, indicating that the present system was a spontaneous and endothermic process. The use of a 0.1M NaOH solution successfully desorbed almost all the dye molecules from dye-loaded C. glutamicum biomass at different solid-to-liquid ratios examined.     

Removal of Cu(II) and Pb(II) by Pithophora oedogonia: sorption, desorption and repeated use of the biomass

Maximum sorption of Cu(II) and Pb(II) by dried filamentous green alga Pithophora oedogonia occurred at pH 4.5 and 5.0, respectively. Chemical pretreatment could not appreciably enhance the metal sorption ability of the biomass. HCl and EDTA desorbed 92-96% of the sorbed metal from the metal-loaded biomass. Sorption and desorption of both the test metals were very rapid attaining an equilibrium within 15 min. The time course data of both the processes fitted well to the pseudo-first and the pseudo-second-order Lagergren kinetic models with r2> or =0.979. The isotherm equilibrium of Cu(II) and Pb(II) followed the Redlich-Peterson and Sips model very well with r2> or =0.991. The sorption of Cu(II) and Pb(II) at varying biomass doses could be well defined by linear and hyperbolic decrease, respectively. The regenerated biomass of Pithophora has better reusability for Pb(II) than for Cu(II). A good mechanical strength of Pithophora biomass was apparent as only 10-15% loss of biomass occurred at the end of the fifth cycle.     

Equilibrium and kinetic studies for the biosorption system of copper(II) ion from aqueous solution using Tectona grandis L.f. leaves powder

The biosorption of copper(II) ions from aqueous solution by Tectona grandis L.f. was studied in a batch adsorption system as a function of pH, metal ion concentration, adsorbent concentration and adsorbent size. The biosorption capacities and rates of copper(II) ions onto T. grandis L.f. were evaluated. The Langmuir, Freundlich, Redlich-Peterson and Temkin adsorption models were applied to describe the isotherms and isotherm constants. Biosorption isothermal data could be well interpreted by the Langmuir model with maximum adsorption capacity of 15.43 mg/g of copper(II) ion on T. grandis L.f. leaves powder. The kinetic experimental data properly correlated with the second-order kinetic model. Various thermodynamic parameters such as deltaG(o), deltaH(o), and deltaS(o) were calculated indicating that this system was a spontaneous and exothermic process.     

Equilibrium studies of sorption of lead(II) ions by different pectin compounds

The adsorption of Pb(II) ions from aqueous solution by different pectin compounds was studied in a batch sorption system. Water-soluble low- and high-esterified pectins and insoluble calcium pectate beads were investigated. The lead-binding capacity of all pectin compounds was highest within the pH range from 7 to 8. The binding capacities and rates of Pb(II) ions by pectin compounds were evaluated. The Langmuir, Freundlich and BET sorption models were applied to describe the isotherms and isotherm constants. Sorption isothermal data could be well interpreted by the Langmuir model. These results obtained through the study suggest that pectin compounds are favorable sorbers. The largest amount of Pb(II) ions were bound by pectin with the low degree of esterfication. Therefore, pectin substances may be considered as perspective for sorption and removal of Pb(II) ions from wastewaters.     

Biosorption of Pb(II) ions by modified quebracho tannin resin

In this study, the effect of temperature, pH and initial metal concentration on Pb(II) biosorption on modified quebracho tannin resin (QTR) was investigated. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used to investigate QTR structure and morphology. Besides, the specific BET surface area and zeta-potential of the QTR were analysed. Thermodynamic functions, the change of free energy (DeltaG degrees), enthalpy (DeltaH degrees) and entropy (DeltaS degrees) of Pb adsorption on modified tannin resin were calculated as -5.43 kJ mol(-1) (at 296+/-2K), 31.84 kJ mol(-1) and 0.127 J mmol(-1) K(-1), respectively, indicating the spontaneous, endothermic and the increased randomness nature of Pb(2+) adsorption. The kinetic data was tested using pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion model. The results suggested that the pseudo-second-order model (R(2)>0.999) was the best choice among all the kinetic models to describe the adsorption behavior of Pb(II) onto QTR. Langmuir, Freundlich and Tempkin adsorption models were used to represent the equilibrium data. The best interpretation for the experimental data was given by the Langmuir isotherm and the maximum adsorption capacity (86.207 mg g(-1)) of Pb(II) was obtained at pH 5 and 296 K.