Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

Composition of Pd-La/α-Al2O3 catalysts

The objective of this study is to investigate the structure of the Pd-La/-Al₂O₃ catalyst. X-ray diffraction (XRD) and temperature-programmed reduction (TPRd) were used as characterization techniques. Contrary to the assertions in the literature, XRD studies conducted on La/-Al₂O₃ composite oxides and Pd-La/-Al₂O₃ catalysts show that Pd catalyzes the solid state reaction between A1₂O₃ and Al₂O₃ to form LaAlO₃. TPRd studies conducted on Pd/-Al₂O₃, Pd/La₂O₃, Pd/LaAlO₃, and Pd-La/-Al₂O₃ catalysts suggest that Pd in the Pd-La/-Al₂O₃ catalyst interacts more strongly with LaAlO₃ than with -Al₂O₃. Reaction studies were conducted to investigate the activity of Pd/-Al₂O₃, Pd/La₂O₃, Pd/LaA10₃, and Pd-La/-Al₂O₃ catalysts for nitric oxide (NO) reduction. These studies show that Pd/LaAlO₃ catalysts are most active for NO removal at stoichiometric and under net reducing conditions.     

Catalytic oxidation of methanol to methyl formate over silver – a new purpose of a traditional catalysis system

Catalytic reaction was performed in the unregarded temperature region over silver catalysts with long catalytic lifetime for the conversion of methanol to methyl formate. O-saturated or O-saturated silver catalysts were studied individually to identify the roles of O, O in the oxidative esterification of methanol over an unsupported polycrystalline silver catalyst. A synergic process is proposed based on the coexistence of -oxygen species and -oxygen species on the surface of polycrystalline silver at about 573 K.     

Small Amounts of Rh-Promoted Ni Catalysts for Methane Reforming with CO2

Small amounts of Rh-promoted Ni/-Al₂O₃ catalysts possessed higher activity than pure Ni/-Al₂O₃, Rh-Al₂O₃ catalysts and exhibited excellent coke resistance ability in methane reforming with CO₂. XRD, H₂-TPR, CO₂-TPD and coking reaction (via CH₄ temperature-programmed decomposition) indicated that Rh improved the dispersion of Ni, retarded the sintering of Ni and increased the activation of CO₂ and CH₄ on the surface of catalyst.     

Joule heating induced local electrodeposition for microelectronic circuits

A fundamental study is performed for local electrodeposition of copper utilizing thermal potential induced by Joule heating. The feasibility of the process for microelectronic applications is assessed by both experiment and mathematical modeling. The results of the investigation show that (i) a copper wire is coated under conditions of a.c. 50 Hz Joule heating in electrolyte containing 1.0 M CuSO₄ and 0.5m H₂SO₄ with relatively high deposition rate of about 0.4 µm min^–1, (ii) the Joule heating current should be kept below the boiling point of the solution to realize uniform deposition, and (iii) results of calculations by the present model based on one-dimensional heat conduction agree well with experimental results.Nomenclature D diameter of wire (m) - D ₀ initial diameter of wire (m) - F Faraday constant (96 487 C mol¹ ) - g acceleration due to gravity (9.807 m s²) - Gr Grashof number - H thickness of electrodeposit (m) - I current (A) - i ₀ exchange current density (Am^–2) - i _n current density normal to electode (Am^–2) - J current density (I/S) (Am^–2) - L length of wire (m) - M molar concentration of electrolyte (mol dm^–3 or M) - m atomic weight (kg mol^–1) - n number of electrons participating - n unit normal vector to boundary - Nu Nusselt number - Pr Prandtl number - q heat per unit volume (W m^–3) - R universal gas constant (8.314 3 J mol^–1 K^–1) - (r, z) cylindrical coordinate (m) - S cross section of wire (m²) - T temperature (K) - T ₀ fixed temperature at both ends of wire (K) - T _y temperature of electrolyte (K) - t time (s) - x longitudinal coordinate over wire (m) Greek symbols heat transfer coefficient (W m^–2 K^–1 - _a,c anodic (a) and cathodic (c) transfer coefficient - thermal expansion coefficient of solution (K^–1) - specific heat (J kg^–1K^–1) - potential (V) - _e electrode potential (V) - thermal conductivity (W m^–1 K^–1 ) - _y ionic conductivity of electrolyte (^–1m^–1) - _e electronic conductivity of electrode (^–1 m^–1) - kinematic viscosity (m²s^–1) - surface overpotential ( _e – ) (V) - time constant (s) - density (kg m^–3) This work was presented at The 7th International Microelectronics Conference, Yokohama, Japan (1992).     

Synthesis of novel telechelic monodispersed nonconjugated dienes

Summary The synthesis of novel telechelic monodispersed nonconjugated dienes from commercially available , -dithiols and dienes is presented. The batch reaction produced a polydispersed. mixture separable with difficulty whereas a dropwise addition of dithiol onto an excess of , -diene in the presence of peroxide led selectively and quantitatively to the addition product: diene-dithiol-diene.     

Preparation and characterization of doped manganese dioxides

Doped manganese dioxide samples, containing cations of different valency, were prepared. The doped and undoped samples contained small amounts of physically held and chemically bound water. The X-ray diffraction patterns of the doped samples were very similar to the pattern of the undoped sample and they all belong to the-modification mixed with-MnO₂ and-Mn₂O₃. The specific surface area of the samples measured by nitrogen adsorption and calculated by the _s-method was in the range 2–5 m²g^–1, indicating a lower porosity and a lower reactivity compared to the-forms. From measurements of pore radii the pores were classified as lying in the mesopore/macropore range (8–35 nm). A decrease in the mean pore radius was observed for the doped samples except for that doped with Li⁺ ions.     

Partial oxidation of methane to synthesis gas over Rh-hexaaluminate-based catalysts

The partial oxidation of methane to synthesis gas over catalysts consisting of Rh supported on hexaaluminates (BaAl₁₂O₁₉, CaAl₁₂O₁₉ and SrAl₁₂O₁₉) was investigated at atmospheric pressure and high reactant dilution in order to compare their performances within the kinetic-controlling regime. Comparison with the results obtained over a commercial Rh/-Al₂O₃ system indicates that hexaaluminate catalysts are active and selective in this reaction. Despite of the higher surface area of the support, hexaaluminate-supported catalysts were found less stable, active and selective than an -Al₂O₃-supported catalyst.     

Inhibition of sunfish feeding by defensive steroids from aquatic beetles: Structure activity relationships

The vertebrate hormone deoxycorticosterone is the most commonly occurring component of defensive secretions from aquatic beetles in the family Dytiscidae. Deoxycorticosterone and the structurally related steroids pregn-4-en-20:-ol-3-one and pregn-4-en-20-ol-3-one were tested for their ability to inhibit feeding by bluegill sunfish,Lepomis macrochirus, in laboratory assays. Deoxycorticosterone at oral doses of 660g (2 x 10^–6 mol) per pellet caused 94% inhibition in the acceptance of artificial food pellets. At the same molar dosage, pregn-4-en-20-ol-3-one inhibited food consumption by 58%, while its epimer, pregn-4-en-20-ol-3-one, did not significantly inhibit feeding. These results indicate that specific stereochemical conditions must be satisfied for the pregnenes to be noxious toL. macrochirus and suggest the existence of a receptor-ligand interaction. The potency of the three steroids in assays of feeding inhibition contradicts earlier results based on toxicity and anesthetic assays in which fish were immersed in solutions of steroids.     

Mechanisms of Iron Activation on Fe-Containing Zeolites and the Charge of α-Oxygen

According to previous Mössbauer data [1] -sites formation at the activation of Fe-containing zeolites is accompanied by irreversible self-reduction of the iron, proceeding without participation of an external reducing agent. Reduced Fe²⁺ ions are inert to O₂ but are reversibly oxidized to Fe³⁺ by N₂O, generating the -oxygen species, O, which provide selective oxidation of hydrocarbons.In this work, the mechanism of -sites formation was studied via quantitative measurement of the dioxygen amount desorbed into the gas phase at the step of self-reduction. A prominent role of the zeolite matrix chemical composition has been revealed. For example, with zeolites of Al–Si composition (FeZSM-5 and Fe-), heating to 900 °C in a closed vacuum space leads to irreversible evolution of O₂, which is accompanied by the immediate formation of -sites. Similar heating of B–Si and Ti–Si zeolites also leads to dioxygen evolution; however, this evolution is reversible and is not accompanied by formation of -sites. Activation of these zeolites occurs only in the presence of water vapor. Stoichiometric measurements showed that in terms of charge one regular O^2- ion, removed at the activation, is equivalent to two -oxygen atoms. So, -oxygen is identified as an ion-radical species O ^-., whose unique oxidation properties still distinguish it from the generally observed O^-. radicals.The mechanism of -sites formation is proposed, in which the process of strong chemical stabilization of reduced Fe²⁺ atoms in the zeolite structure is a key step, making impossible the reoxidation of the iron with O₂.     

Synthesis,electroconductivity and third-order nonlinear optical property of poly(2-isopropoxy-5-methoxy-1,4-phenylenevinylene)

Summary Asymmetrically disubstituted poly(2-isopropoxy-5-methoxy-1,4-phenylene-vinylene), PIMPV, was prepared in thin films via organic-soluble precursor polymer method. These polymer films could be easily stretched up to 7 times, and the drawn films of the PIMPV could be doped with FeCl₃ and I₂ to give conductivities of 26.9 and 11.3 Scm^-1, respectively. The third-order nonlinear optical susceptibility of the polymer was determined using third harmonic generation(THG) method at 1907 nm, fundamental wavelength. Measured ⁽³⁰⁾ (-3: , , ) value was 3.7x10^-12 esu.     

Composition of aphid alarm pheromones

Analysis of single cornicle droplets from six species of aphid showed the presence of volatile components in addition to (E)--farnesene. Compounds identified included (Z,E)-- and (E,E)--farnesene forMyzus persicae and - and -pinene forMegoura viciae. WithMegoura viciae, (–)--pinene was most important for alarm activity. The major component of the alarm pheromone ofPhorodon humuli was (E)--farnesene even though farnesenes are present in the summer hostHumulus lupulus.     

Grinding kinetics of calcined alumina

Conclusions If it is necessary to obtain a mineral powder with a high dispersion (_mean 1 ), it is technically-undesirable and economically unsuitable to increase the quantity of grinding bodies by more than four times with respect to the weight of -Al₂O₃.Silicone oil is a suitable surface active agent for carrying out effective dry grinding of -Al₂O₃.With the dry grinding of -Al₂O₃ using metal grinding bodies, the iron pickup is approximately ten times greater than with wet grinding. During the dry grinding of -Al₂O₃ with an addition of silicone oil, and corundum grinding bodies, the rate of grinding is the same as with wet grinding using metal grinding bodies.Translated from Ogneupory, No. 8, pp. 71–72, August, 1971.     

Anisotropic structure analysis for cobalt oxides on α-Al2O3(0001) by polarized total-reflection fluorescence extended X-ray absorption fine structure

Anisotropic structure analyses for [CoO_x]/-Al₂O₃ (0001) and [Co₃O₄]_n /-Al₂O₃ (0001) which were derived from Co₂(CO)₈/-Al₂O₃ (0001) were performed by a polarized total-reflection fluorescence extended X-ray absorption fine structure (EXAFS) technique. Both s- and p-polarized EXAFS data revealed that the cobalt atoms of [CoO_x] were located on three-fold hollow sites of -Al₂O₃ (0001) in a monomer form and that a thin spinel structure [Co₃O₄] grew with the (001) plane parallel to -Al₂O₃ (0001).     

Coarsening of Mesoporous α-Al2 3 Ceramics

Until recently, the processing of high surface area alumina ceramics has been restricted to transitional phases such as , , and . In this study, a nanocrystalline -Al_{2 3} powder (100 m²/g) was processed into mesoporous -Al_{2 3} ceramics with surface areas in the range 20 to 80 m²/g. Hence, the opportunity exists to study the effect of thermal treatment on the pore structure of a high surface area -Al_{2 3} ceramic in the temperature range 600°C to 1000°C. The reduction in surface area was characterized as pure coarsening by surface diffusion. Examination of the pore structure showed both intraparticle pores and interparticle pores in the temperature range 600°C to 800°C and only interparticle pores above 800°C. The powder particles were dense and polycrystalline. However, much of their internal structure is lost in heat treatments above 1000°C.     

On the promotional effect of Sn in Co–Sn/Al2O3 catalyst for NO selective reduction

NO reduction with propylene over Co/Al₂O₃ and Co–Sn/Al₂O₃ catalysts has been investigated. For the Co/Al₂O₃ catalyst, a calcination temperature exceeding 800°C led to a decrease of NO conversion. Calcination of the Co/Al₂O₃ catalyst at 1000°C resulted in the formation of -Al₂O₃ and Co₃O₄. The presence of 20% water vapor showed a significant shift for the maximum NO reduction temperature from 450 to 600°C over Co/Al₂O₃. It has been found that modification of 6 wt% Co/Al₂O₃ with 2 wt% Sn significantly enhanced the catalyst thermal stability and improved the inhibitory effect of water on NO conversion and reaction temperature. The promotional effect of Sn on the catalyst thermal stability was attributed to the suppression of the phase transformation from highly dispersed Co²⁺ species on -Al₂O₃ to -Al₂O₃ and Co₃O₄. The smaller influence of water vapor on NO reduction conversion and temperature over Co–Sn/Al₂O₃, compared to Co/Al₂O₃, was attributed to the dispersion effect of Sn species on Co²⁺ species as well as the involvement of Sn species in NO reduction at a relatively lower temperature. The synergetic effect between the octahedral Co²⁺ species and -alumina plays a significant role in the catalysis of NO selective reduction by C₃H₆.     

Effect of the crystalline from of Al2O3 on the interaction and sintering of large-crystal quartzite and disperse alumina

It is established that the amount of mullite and the value of the open porosity of specimens increase in the sequence -Al₂O₃(+)-Al₂O₃-Al₂O₃Al₂O₃ · 3H₂O. The apparent density and the ultimate compressive strength increase in the reverse direction. Active modifications of alumina (hydrargillite, -Al₂O₃) stimulate mullite formation, which is accompanied by an increase in the open porosity to 40% and a decrease of the mechanical strength to 8–12.5 MPa, and high (up to 12%) linear shrinkage. High-quality, dense, strong refractories can be produced in a single firing from coarse-grained quartzite and finely disperse corundum and alumina in the form of -Al₂O₃.Translated from Ogneupory, No. 10, pp. 18 – 20, October, 1994.Eastern Institute of Refractories.     

Properties ofSrMO 3-δ(M=Fe,Co) as oxygen electrodes in alkaline solution

Strontium ferrates and cobaltates with compositions SrFeO_3- (0.060.40) and SrCoO_3- (0.040.30) were synthesized. The dependence of the oxygen electrode properties on the value was examined in 1 mol dm^–3 KOH solution. In the SrFeO_3- series, the samples with 0.24<<0.29, showed the highest activity in both oxygen evolution and reduction reactions. In contrast, no strong dependence on the value was observed in SrCoO_3-, which also showed a high catalytic activity for oxygen evolution.     

Elucidating the mechanism of carbocationic polymerization of α-methylstyrene

Summary The polymerization of -methylstyrene (MeSt) using the H₂O/SnCl₄ initiating system and ethyl chloride solvent has been investigated over the temperature range from –40° to –122°C in the presence and absence of the proton trap 2,6-di-tert-butylpyridine (DtBP). Arrhenius (In ¯M_n versus 1/T) plots obtained with poly (methylstyrene) (PMeSt) samples prepared in the absence of DtBP reveal the existence of two sharply defined temperature regimes (see Figure 1): at higher temperatures from –40 to –86°C, the slope of the Arrhenius plot yields H_{M n} = –4.90±0.25 kcal/mole whereas at lower temperatures, from –86° to –122°C,H_{M n} = –0.3 kcal/mole. With PMeSt samples prepared in the presence of DtBP the H_{M n} obtained for the higher temperature regime increases to –1.67 ± 0.20 kcal/mole whereas the H_{M n} reflecting the lower temperatures remains the same as that obtained in the absence of DtBP. These observations are readily explained by postulating a change in mechanism at –86°C: Evidently the ¯M_n of PMeSt is determined over the higher temperature regime by chain transfer to monomer which is frozen out at lower temperatures where termination becomes ¯M_n determinant. In the absence of DtBP chain transfer to monomer is operative which leads to the higher Arrhenius slope over the higher temperature regime; however, over the lower temperature regime where chain transfer is absent and termination is ¯M_n controlling, the Arrhenius slope remains unchanged. Evidence obtained from a Mayo plot (negligible intercept in the 1/¯M_n versus 1/[MeSt]_o plot, Figure 2) with samples prepared at –92°C, corroborate this postulate. Molecular weight dispersities (¯M_W/¯M_n) as a function of temperature have been determined in the presence and absence of DtBP (Figure 3). The proton trap affects ¯M_W/¯M_n only over the higher temperature regime which also suggests that chain transfer to monomer is frozen out at –86°C and that the polymerization becomes termination dominated at low temperatures.     

Physicochemical properties of electrodepositedβ-lead dioxide: Effect of deposition current density

The influence of current density on the coulometric efficiency of -PbO₂ deposition in 0.5 M cM lead nitrate, the nonstoichiometry, impurity of -PbO₂ and voltammetric double layer capacitance have been studied. While the coulometric efficiency is about 95% at current densities less than 30 mA cm^–2, it decreases at higher current densities. The oxygen deficiency, , in -PbO_2- has been found to be invariant with the current density. X-ray diffraction studies provide a linear decrease in the weight percent of -PbO₂ as an impurity in the -PbO₂ with increase in current density, and the -PbO₂ is found to be absent at 100mA cm^–2 or higher. The estimated double layer capacitance from the cyclic voltammograms recorded in the potential range 0.70–1.10V, increases with deposition current density, indicating enhanced surface area.