Hydrothermal Synthesis of Tetragonal Barium Titanate from Barium Hydroxide and Titanium Dioxide under Moderate Conditions

Tetragonal BaTiO₃ powders were prepared hydrothermally, using Ba(OH)₂·8H₂O and TiO₂ (anatase), in the absence of anions such as chloride ions, at a temperature of 220°C for several days. Characterization via X-ray diffractometry, scanning electron microscopy, and differential scanning calorimetry confirmed that increasing the Ba:Ti molar ratios (from 1:1 to 4:1) and alkaline concentrations (from 1.0 M to 3.0 M ) promotes the formation of tetragonal BaTiO₃.     

Conversion of SiO2 Diatom Frustules to BaTiO3 and SrTiO3

Diatom frustules were used as bio-templates to synthesize functional ceramics via solid–gas displacement reactions. Silica-based frustules were exposed to TiF₄ at 330°C to form TiOF₂, which was later converted to TiO₂ (anatase) by heat treatment in air at 600°C. The TiO₂ frustules were then exposed to molten Ba(OH)₂ or Sr(OH)₂ to form BaTiO₃ or SrTiO₃, respectively. In both cases, near-complete conversion was achieved while retaining the morphology of the original silica frustules. BaTiO₃ and SrTiO₃ frustules exhibit nearly phase pure, nanocrystalline perovskite structure.     

Uniform Coating of Nanometer-Scale BaTiO3 Layer on Spherical Ni Particles via Hydrothermal Conversion of Ti-Hydroxide

A uniform BaTiO₃ nano layer was coated on spherical Ni particles for multilayer ceramic capacitor applications via a Ti-hydroxide coating using the controlled hydrolysis of a TiCl₄ butanol solution containing (C₂H₅)₂NH (diethylamine, DEA) and its subsequent hydrothermal reaction at various [Ba(OH)₂], residual [DEA], and hydrothermal temperatures. The hydrothermal conversion was successful at [Ba(OH)₂]≥0.065 M (Ba/Ti≥1.3) and T ≥150°C, and the residual DEA in the Ti-hydroxide coating layer not only affected the formation of the BaTiO₃ phase but also resulted in a rough surface morphology. When a minimal amount of DEA was involved in the formation of Ti-hydroxide, a uniform BaTiO₃ coating with a clean surface morphology could be attained, which was confirmed by elemental mapping of the coated powder and the observation of hollow spheres after removing the Ni core. The BaTiO₃ coating was very effective not only in preventing Ni oxidation but also in shifting the starting point of Ni densification to a higher temperature.     

Nucleation and Inhibition Control during the Hydrothermal–Electrochemical Growth of Barium Titanate Films

The control of the microstructure of BaTiO₃ films grown on titanium by the hydrothermal–electrochemical method was investigated. Experiments were conducted in a three-electrode high-pressure electrochemical cell in a 0.1 M Ba(OH)₂ electrolyte at 150°C. Results showed that the spontaneous initial nucleation linked to pure hydrothermal BaTiO₃ formation can be inhibited by cathodically protecting the titanium electrode from the moment it is immersed in the electrolyte. The application of initial nucleation pulses of varying cathodic potentials affected the grain size of the deposit. It is suggested that the formation of a titanium oxide layer is a necessary step previous to the nucleation of BaTiO₃.     

Hydrothermal Soft Chemical Synthesis and Particle Morphology Control of BaTiO3 in Surfactant Solutions

Barium titanate (BaTiO₃) particles with book-like and spherical morphology were prepared by using a hydrothermal soft chemical process in the presence of a cationic surfactant. A layered titanate of H_1.07Ti_1.73O₄ with a lepidocrocite-like structure and plate-like particle morphology was used as the precursor. The layered titanate was hydrothermally treated in a Ba(OH)₂–(HTMA-OH) ( n -hexadecyltrimethylammonium hydroxide) solution or a Ba(OH)₂–(HTMA-Br) ( n -hexadecyltrimethylammonium bromide) solution in a temperature range of 80°–250°C to prepare BaTiO₃. The intercalation reaction of HTMA⁺ with the layered titanate promotes the structural transformation reaction from the layered titanates to BaTiO₃, while it inhibits the structural transformation reaction to anatase under the hydrothermal conditions. The particle morphology of BaTiO₃ prepared by this method dramatically changes with changing reaction conditions. HTMA⁺ plays an important role in changing particle morphology in the hydrothermal soft chemical process.     

Preparation of Hollow BaTiO3 and Anatase Spheres by the Layer-by-Layer Colloidal Templating Method

Hollow BaTiO₃ and anatase spheres were prepared from multilayered colloidal titanate particles. An inorganic precursor, titanium (IV) bis(ammonium lactate) dihydroxide (TALH) (chemical formula: [CH₃CH(O–)CO₂–NH₄]₂Ti(OH)₂) was used. First, a layer-by-layer (LBL) colloid-templating method was employed using TALH to generate monodispersed hollow titanate spheres. These spheres were then treated in a Ba(OH)₂ solution or distilled water under hydrothermal conditions to transform them into hollow BaTiO₃ or anatase spheres, respectively.     

Hydrothermal Synthesis for Large Barium Titanate Powders at a Low Temperature: Effect of Titania Aging in an Alkaline Solution

Monodisperse and spherical barium titanate (BaTiO₃) powders with diameters of 200–470 nm were directly prepared by a low-temperature hydrothermal method at 90°C. Spherical titania (TiO₂) powders, ranging in size from 150 to 420 nm, were initially prepared by a controlled hydrolysis and condensation reaction, aged in a highly alkaline solution for 12 h, and then hydrothermally reacted with barium hydroxide to be converted to BaTiO₃ without a morphological change. The aging step of the TiO₂, where the surface of TiO₂ was highly densified through elimination of the pores, was indispensable to retain the sizes and shapes of TiO₂ in the resulting BaTiO₃. This was due to the fact that the formation of BaTiO₃ proceeded by an in situ reaction mechanism. The resulting BaTiO₃ powders exhibited dense and nonporous structures even after calcination at 1000°C.     

Synthesis of Nano-sized BaTiO3 Powders by the Rotary-Hydrothermal Process

Nano-sized BaTiO₃ powders with narrow size distribution and high tetragonality were attempted to be synthesized by the rotary-hydrothermal process in a water system as a novel technique, using a mixture of anatase-type TiO₂ and Ba(OH)₂ as starting material. The rotary-hydrothermal syntheses were performed under conditions with a rotary-speed of 20 revolutions per minute at 423–523 K for 3–96 h. Highly- and mono-dispersed BaTiO₃ powders mainly composed of coarse-faceted particles with the tetragonal phase were successfully synthesized by controlling the conditions for rotary-hydrothermal treatments. TEM and TG results revealed that these coarse-faceted BaTiO₃ particles contained very few structural defects such as hydroxyl content. Thus, the rotary-hydrothermal process was a useful method to synthesize very high-quality BaTiO₃ particles, and the further control of various conditions of the rotary-hydrothermal treatment is expected to control the crystalline phase and microstructures of final BaTiO₃ powders.     

Solubility of TiO2 in BaTiO3

Scanning electron microscopy and electron probe micro-analysis were used to investigate the microstructure of both slow-cooled and quenched polycrystalline BaTiO₃ specimens with a small excess of TiO₂ (Ba/Ti=0.995 to 0.999) or of BaO (Ba/Ti=1.002 and 1.005). The electron micrographs of polished and etched TiO₂-excess BaTiOs samples, and of fracture surfaces of quenched samples, showed a second phase in the grain boundaries and triple-point regions, whereas no second phase was observed in samples having Ba/Ti=1.000. Microprobe analysis of the second phase gave compositions near that of the reported adjacent phase of higher TiO₂ content, Ba₆Ti₁₇O₄₀. The results indicate that the solubility of TiO₂ in BaTiO₃ is <0.1 mol%.     

Preparation of Fine Tetragonal Barium Titanate Powder by a Microwave–Hydrothermal Process

A microwave–hydrothermal (MH) process was performed at 240°C to prepare tetragonal BaTiO₃ from TiCl₄ and Ba(OH)₂. No alkali hydroxide was used to avoid contaminations. MH BaTiO₃ powder with a c / a ratio of 1.010 and a mean size of 180 nm was synthesized within only 9 h. The MH BaTiO₃ contains a very low concentration of lattice hydroxyl group, associated with a very small lattice strain. The measured density of the MH BaTiO₃ is favorably consistent with the theoretical value, and the Ba/Ti stoichiometry determined is 0.996. The formation of a tetragonal structure in BaTiO₃ and the particle growth were strongly promoted by the MH process. The effects of lattice defects on the stoichiometry and the determination of transition enthalpy were discussed.     

Electroceramics from Source Materials via Molecular Intermediates: PbTiO3 from TiO2 via [Ti(catecholate)3]2-

The precursor [NH₄]₂[Ti(catecholate)₃] · 2H₂O is known to react with Ba(OH)₂· 8H₂O in an acid/base process that generates Ba[Ti(catecholate)₃] · 3H₂O, a compound which undergoes low-temperatue calcination to produce BaTiO₃ powder. Attempts to develop similar routes to PbTiO₃ have been frustrated, since lead(II) hydroxide does not exist. The amphoteric yellow PbO and the basic oxide, Pb₆O(OH)₆⁴⁺, are both insufficiently basic to react with [NH₄]₂[Ti(catecholate)₃] · 2H₂O. Based on the large sizes of both the [Ti(catecholate)₃]^2- anion and the Pb²⁺ cation, a precipitation method has been developed in which lead nitrate and [NH₄]₂[Ti(catecholate)₃] · 2H₂O are added together in an aqueous medium causing precipitation and leaving only NH₄NO₃ in solution. The lead-titanium-catecholate complex that forms in this manner undergoes low-temperature pyrolysis to produce PbTiO₃. SEM indicates a submicrometer ultimate crystallite size.     

Solid-State Preparation of BaTiO3-Based Dielectrics, Using Ultrafine Raw Materials

BaTiO₃ and Ba(Ti,Zr)O₃ dielectric powders have been prepared from submicrometer BaCO₃, TiO₂, and ZrO₂. By use of submicrometer BaCO₃ the intermediate formation of Ba₂TiO₄ second phase can be widely suppressed. Monophase perovskites of BaTiO₃ were already formed at 900°C and Ba(Ti,Zr)O₃ at 1050°C. Aggregates of very small subgrains could be easily disintegrated to particle sizes <0.5 μm.     

Electroceramics from Source Materials via Molecular Intermediates: BaTiO3 from TiO2 via (Ti(catecholate)3)2-

Rutile or anatase may be depolymerized and complexed by sequential treatment with (i) H₂SO₄/(NH₄)₂SO₄, (ii) H₂O, and (iii) catechol/NH₄OH to produce the intermediate (NH₄)₂(Ti(catecholate)₃) · 2H₂O. Treatment with Ba(OH)₂· 8H₂O leads to an acid-base reaction generating Ba(Ti(catecholate)₃) · 3H₂O, in which the Ba:Ti ratio is held at 1:1 at the molecular level. Calcination produces BaTiO₃ powder.     

Semiconducting Bodies in the Family of Barium Titanates

The anomalous resistivity-temperature characteristics found in semiconducting barium titanates were studied in relation to their composition. The resistivity and impedance characteristics and the crystal structures were investigated for different compositions in the systems (Ba, -Sr) (Ti, Sn)O₃, (Ba, Ca, Sr)TiO₃) (Ba, Pb)TiO₃, Ba-(Ti, Zr)O₃, and Ba(Ti, Si)O₃ doped with 0.1 mole % of Ce and also in the system (Ba, Mg, Ce) TiO₃. Bodies whose compositions were quite different from BaTiO₃ could not be semiconducting. The resistivity anomaly in each semiconducting body showed a good correlation with the crystal transition.     

Grain-Boundary Migration and Dielectric Properties of Semiconducting SrTiO3 in the SrTiO3-BaTiO3-CaTiO3 System

Chemically induced grain-boundary migration and its effects on the interface and dielectric properties of semiconducting SrTiO₃ have been investigated. Strontium titanate specimens that had been doped with 0.2 mol% of Nb₂O₅ were sintered in 5H₂/95N₂. The sintered specimens were diffusion annealed at 1400°C in 5H₂/95N₂ with BaTiO₃ or 0.5BaTiO₃-0.5CaTiO₃ (mole fraction) packing powder. The grain boundaries of the annealed specimens were oxidized in air. In the case of BaTiO₃ packing, grain-boundary migration occurred with the diffusion of BaTiO₃ along the grain boundary. The effective dielectric constant of the specimen decreased gradually as the temperature increased but showed two peaks, possibly because of barium enrichment at the grain boundary and an oxidized Sr(Ba)TiO₃ layer. In the case of 0.5BaTiO₃-0.5CaTiO₃ packing, although barium and calcium were present at the grain boundary of the specimen, no boundary migration occurred, as in a previous investigation. With the diffusion of barium and calcium, the resistivity of the specimen increased and the variation of the effective dielectric constant with temperature was much reduced, in comparison to those without solute diffusion. These enhanced properties were attributed to the solute enrichment and the formation of a thin diffusional Sr(Ba,Ca)TiO₃ layer at the grain boundary.     

Modified Phase Diagram for the Barium Oxide–Titanium Dioxide System for the Ferroelectric Barium Titanate

The ferroelectric phase transition behavior in BaTiO₃ was investigated for various annealing times, temperatures, and Ba/Ti ratios by means of a differential scanning calorimeter. Coupling these observations with powder X-ray diffraction and transmission electron microscopy allowed new insights into the barium oxide (BaO)–titanium dioxide (TiO₂) phase diagram. The transition temperature was varied systematically with the Ba/Ti ratio at annealing temperatures from 1200° to 1400°C in air. The transition temperature decreased with increasing concentrations of BaO and TiO₂ partial Schottky defects, and showed a discontinuous change at the phase boundaries. Beyond the solubility region, two peritectoid reactions were confirmed and revised; first around 1150°C for Ba_1.054Ti_0.946O_2.946→Ba₂TiO₄+BaTiO₃ and second 1250°C for BaTi₂O₅→Ba₆Ti₁₇O₄₀+BaTiO₃, respectively. All other regimes of the BaO–TiO₂ were found to be consistent with the reported diagrams in the literature.     

Effects of Composition on the Reaction Kinetics of Hydrothermally Derived Barium Strontium Titanate

Barium strontium titanate (BST, Ba _x Sr_{1− x} TiO₃) powders were fabricated by reacting nanocrystalline TiO₂ with aqueous alkaline solutions containing Ba and Sr at 80°C. Measurements of reaction kinetics showed that Ba-rich BST compositions exhibited more rapid reaction rates compared with Sr-rich BST compositions, and the reaction rate increased monotonically with increasing Ba content. The average particle size also increased with increasing Ba content, with the particle growth rate of BaTiO₃ being approximately a factor of 10 greater than SrTiO₃. The increase in growth rate from Sr-rich to Ba-rich BST corresponded to a morphological transition from 20 to 30 nm cuboidal particles to 80 nm raspberry-like particles, respectively.     

Hydrothermal Synthesis of Nanometer-Sized Barium Titanate Powders: Control of Barium/Titanium Ratio, Sintering, and Dielectric Properties

Nanometer-sized BaTiO₃ powders have been synthesized hydrothermally from Ba(OH)₂ and titanium alkoxide at 150°C for 2 h, and the Ba/Ti ratio has been measured with an accuracy of ±0.003. Stoichiometric powders can be obtained by adjusting the Ba/Ti ratio of the reactants to a value of 1.018. At a lower Ba/Ti ratio, the solubility of Ba(OH)₂ prevents full incorporation of barium, and barium-deficient powders result. A higher Ba/Ti ratio leads to the incorporation of excess barium in the powder. K _s(BaTiO₃,-25°C) = 7 × 10^-8 has been calculated for the equilibrium reaction. From this result, two reproducible processes for the synthesis of stoichiometric BaTiO₃ are proposed. The processes rely only on very accurate control of the chemical composition (Ba/Ti ratio) of the precursor suspension. The sintering behavior of powders having Ba/Ti ratio values between 0.965 and 1.011 is described from results of dilatometric measurements and isothermal sintering. Room-temperature dielectric constants as high as 5600 and losses as low as 0.009 have been obtained for a stoichiometry slightly less than 1.000. It is expected that optimum sintering behavior and electrical properties are obtained in the stoichiometry range 0.995-1.000.     

{111} Twin Formation and Abnormal Grain Growth in Barium Strontium Titanate

Two series of experiments were performed to study the experimental conditions for the formation of {111} twins and related microstructures in barium strontium titanate ((Ba, Sr)TiO₃). In the first series, the phase equilibria in the BaTiO₃–SrTiO₃–TiO₂ system were determined. XRD and WDS analysis, done in the BaTiO₃-rich region, of 45(Ba,Sr)TiO₃–10TiO₂ samples annealed at 1250°C for 200 h in air showed that (Ba,Sr)TiO₃ was in equilibrium with Ba₆Ti₁₇O₄₀ (B₆T₁₇) and Ba₄Ti₁₃O₃₀ phases with strontium solubility (Sr/(Ba + Sr)) of ∼0.02 and 0.20, respectively. In the second series the microstructures of samples consisting of a mixture of (Ba,Sr)TiO₃ and 2.0 mol% TiO₂, were observed after sintering at 1250°C for 100 h in air. {111} twins formed only in the samples with faceted B₆T₁₇ second phase particles, similar to the case of BaTiO₃. In these samples, abnormal grain growth occurred in the presence of the {111} twins. In contrast, no {111} twins formed and no abnormal grain growth occurred in the samples containing second phase particles other than B₆T₁₇. With an increased substitution of strontium for barium, the aspect ratio of abnormal grains containing {111} twin lamellae was reduced. This result was attributed to a reduction in the relative stability of the {111} planes with the strontium substitution.     

Calcium as an Acceptor Impurity in BaTiO3

The equilibrium electrical conductivity of polycrystalline, calcium-doped BaTiO₃ was studied over the oxygen partial pressure range 10^-13 to 10⁵ Pa and the temperature range 800° to 1000°C. There is little effect if CaO is substituted for a corresponding amount of BaO, i.e., Ba, _1-xCa_xTiO₃. If CaO is substituted for a corresponding amount of the TiO₂ content, i.e., BaTi_1-xCa_xO_3-x, the equilibrium conductivity shows strong evidence of acceptor-doped behavior. If the corresponding amount of excess CaO is added to stoichiometric BaTiO₃, i.e., BaCa_xTiO_3+x, the conductivity profiles are very close to those for samples with TiO₂ replaced by CaO, and show highly acceptor-doped behavior. This is in agreement with the replacement of a small amount of Ti by Ca²⁺ on the octahedral B-sites of BaTiO₃, where it acts as an acceptor center, Ca_T