Bimagnetic hard/soft and soft/hard ferrite nanocomposites: Structural,magnetic and hyperthermia properties

Recent studies show that the chemical composition and shape of magnetic nanoparticles (NPs) play an important role in their properties. In particular, the bimagnetic NPs display useful and in many cases, more interesting properties than single-phase NPs. In this work, we prepared Fe₃O₄ and CoFe₂O₄ cube-like NPs and bimagnetic hard/soft (CoFe₂O₄/Fe₃O₄) and soft/hard (Fe₃O₄/CoFe₂O₄) nanocomposites (core/coating) using a facile and eco-friendly co-precipitation method that allows the synthesis of the cube-like NPs at temperatures near room temperature. The phase purity and the crystallinity of the NPs with a spinel structure were confirmed by the X-ray diffraction and infrared spectra techniques. Transmission electron microscopy (TEM) images revealed that the NPs have a cubic-like shape with an average dimension of 20 nm. Energy dispersive X-ray analysis, Mössbauer spectroscopy and SQUID magnetic measurements indicated the co-existence of Fe₃O₄ and CoFe₂O₄ phases in nanocomposites. In addition, the hysteresis loops exhibited a single-phase behavior in the nanocomposites that indicates there is a good exchange-coupling interaction between the hard and soft magnetic phases. The CoFe₂O₄/Fe₃O₄ nanocomposites presented a larger saturation magnetization than the CoFe₂O₄ NPs that is effective for their use in magnetic hyperthermia. Finally, we studied the hyperthermia properties of samples in an alternating magnetic field with a frequency of 276 kHz and field amplitude of 13.9 kA/m. Our results showed that magnetic hyperthermia efficiency simultaneously depends on the composition of samples along with magnetic anisotropy and saturation magnetization.     

Exchange-spring behavior in BaFe12O19-Ni0.5Zn0.5Fe2O4 nanocomposites synthesized by a combustion method

Exchange-spring systems offer various technological applications. In this study, BaFe₁₂O₁₉-Ni_0.5Zn_0.5Fe₂O₄ nanocomposite magnets with single-step hysteresis loops were synthesized through a simple combustion method. Their composition, microstructure, and magnetic properties were also investigated. It was found that the magnetic properties and the mechanisms governing the magnetization of these nanocomposite magnets are strongly influenced by the calcination temperature as well as the molar ratios of the hard and soft phases. The exchange-coupling between the hard and soft magnetic phases was confirmed by the study of Henkel plots and the variation in the magnetic properties could also be explained by the dominant role of exchange and dipolar interactions in the nanocomposites. The study provides a simple but efficient route for the fabrication of exchange-coupled nanocomposite magnets based on ferrites having controllable magnetic properties.     

Magnetic properties of hard (CoFe2O4)–soft (Fe3O4) composite ceramics

Composite ceramics of CoFe₂O₄/Fe₃O₄ with different weight ratios were synthesized by Spark Plasma Sintering (SPS) at a sintering temperature of 500 °C. The X-ray diffraction patterns demonstrate that all samples are composed of CoFe₂O₄ and Fe₃O₄ phases. The magnetization curves for all the composite ceramic are single-step loops indicating the existence of exchange spring effect. Due to the competition between the exchange interaction and the dipolar interaction, magnetic properties like coercivity (H_c) and remanence (M_r) are sensitive to the weight ratio of the soft phase.     

Structure and magnetic properties of multi-morphological CoFe2O4/CoFe nanocomposites by one-step hydrothermal synthesis

Multi-morphological CoFe₂O₄/CoFe nanocomposites have been synthesized using a facile hydrothermal process. The effects of hydrazine hydrate amount during hydrothermal reaction on the structure and magnetic property of the specimens were studied. With increasing hydrazine hydrate amount, the CoFe₂O₄ transformed to CoFe and the morphology of the specimen changed from granular particles to faceted particles. The saturation magnetization monotonically increased and the coercivity monotonically decreased with increasing hydrazine hydrate amount. The magnetic interactions, determining the magnetic properties of the composites, result from the dominant dipole coupling and relative weak exchange coupling between CoFe₂O₄ and CoFe nanoparticles. The CoFe₂O₄/CoFe nanocomposite prepared with 2?mL hydrazine hydrate exhibited the optimal magnetic properties, with the saturation magnetization of 81?emu/g and coercivity of 636?Oe.     

Ferrite‐Based Exchange‐Coupled Hard–Soft Magnets Fabricated by Spark Plasma Sintering

Ferrite‐based, hard‐soft magnetic nanocomposites with the composition (100%?x)SrFe₁₂O₁₉–xCoFe₂O₄, where x = 5, 10, and 15 wt%, were prepared by mixing the constituent powders, followed by spark plasma sintering. In order to control the particle size of the constituent materials, the SrFe₁₂O₁₉ and CoFe₂O₄ powders were synthesized using the hydrothermal method, mixed and then consolidated with spark plasma sintering. The conditions during the spark plasma sintering process (sintering temperature, time, and applied pressure) were varied in order to prepare composites with a high density and exchange‐coupled hard and soft magnetic phases, leading to an increase in the maximum energy product, when compared with pure SrFe₁₂O₁₉. The microstructural analysis revealed that the relative density of the sintered composite exceeded 90% of the theoretical value and that the CoFe₂O₄ was uniformly distributed in the SrFe₁₂O₁₉ matrix. Magnetic measurements of the sintered composites showed a single‐phase magnetic behavior. When compared with the single‐phase SrFe₁₂O₁₉ used in this study, the SPS composites exhibited a 22% increase in the maximum energy product (26.1 kJ/m³).     

Enhancement of Interparticle Exchange Coupling in CoFe2O4/CoFe2 Composite Nanoceramics Via Spark Plasma Sintering Technology

Powders and nanoceramics composed of composites of CoFe₂O₄, CoFe₂, and a small amount of FeO were prepared by heating CoFe₂O₄ powder in reducing atmosphere and by sintering the product of reducing reaction at 350°C via spark plasma sintering technology. In the powders, increase in the molar ratios of CoFe₂:CoFe₂O₄ and a great change in magnetic parameters were observed with the change in heating temperature from 300°C to 400°C, and the dominance of dipole interaction over exchange coupling in the interparticle interactions was confirmed by the steps in magnetic hysteresis loops and the negative Henkel plots. However, in the nanoceramics, significant enhancement in exchange coupling was found when the sintering temperature was raised to 500°C and 650°C, which was confirmed by both the positivity of Henkel plot and the single‐phase style of the magnetic hysteresis loop.     

Role of exchange coupling between the hard and soft magnetic phases on the absorption of microwaves by SrFe10Al2O19/Co0.6Zn0.4Fe2O4 nanocomposite

(1-x)SrFe₁₀Al₂O₁₉/(x)Co_0.6Zn_0.4Fe₂O₄-(SFAO/CZFO) hard/soft nanocomposite ferrite materials were synthesized by ‘one-pot’ self-propagating combustion route. The co-existence of the two magnetic phases were confirmed by XRD, FESEM, EDS and VSM. The prepared nanocomposite samples were also characterized by TGA/DSC, Raman spectroscopy and VNA. Exchange coupling between the hard and the soft magnetic grains was observed by determining the switching field distribution (SFD) curve. As a result of the competing effects of exchange interaction and dipolar interaction, magnetic parameters were observed to be sensitive to the incorporation of soft magnetic phase into the nanocomposite. Results showed that with the inclusion of soft magnetic phase, exchange coupling behaviour between the hard and the soft ferrite phases had significant influence on the microwave absorption capacity of the samples. Related electromagnetic parameters and impedance matching ratio of the nanocomposite system were discussed. A minimum reflection loss of ?42.9 dB with an absorber thickness of 2.5 mm was attained by the nanocomposite (90 wt%)SrFe₁₀Al₂O₁₉/(10 wt %)Co_0.6Zn_0.4Fe₂O₄ at a matching frequency of 11.45 GHz. This assured the candidacy of SrFe₁₀Al₂O₁₉/Co_0.6Zn_0.4Fe₂O₄ nanocomposite as a promising microwave absorption material in the X-band (8–12 GHz).     

Hybrid nanocomposites based on superparamagnetic and ferromagnetic particles: A comparison of their magnetic and dielectric properties

Nanocomposites of magnetic nanoparticles and polymer matrices combine the properties of their components, and as such are good examples of functional nanomaterials with excellent application potential. Against this background, experimental and theoretical studies of such composites are of great interest. In this study we aim to provide insight into the static and dynamic magnetic response, as well as the dielectric response, of magnetic nanocomposites subjected to external magnetic and electric fields. We directly compare the behavior of polyurethane films doped with superparamagnetic Fe₃O₄, and blocked ferromagnetic CoFe₂O₄ nanoparticles. While a reversible, Langevin magnetization curve is observed for Fe₃O₄@PU films, hysteretic magnetic behavior is found in case of CoFe₂O₄@PU films. The hysteresis observed for CoFe₂O₄ nanoparticles can be explained by interactions at the interface between particles and polymer matrix in conjunction with its ferromagnetic nature. The results of dielectric spectroscopy experiments revealed different effects of Fe₃O₄ and CoFe₂O₄ nanoparticles on polymer dynamics.     

Dielectric,ferroelectric and magnetoelectric properties of in-situ synthesized CoFe2O4/BaTiO3 composite ceramics

Magnetoelectric composite materials have attracted more and more attention because of their coupling of ferroelectricity and ferromagnetism. It is a hotspot to realize the combination of ferromagnetic phase and ferroelectric phase. In this work, we used a new strategy to prepare CoFe₂O₄/BaTiO₃ composite ceramics: firstly, porous ferromagnetic CoFe₂O₄ phase was prepared by annealing of MOFs (metal organic frameworks) precursor Fe₃[Co(CN)₆]₂. And then, the ferroelectric BaTiO₃ phase in-situ grew in the pores of CoFe₂O₄ by a hydrothermal method. In the end, the CoFe₂O₄/BaTiO₃ composite ceramics sintered at different temperatures have been synthesized. The effects of sintering temperature on the structure, dielectric and ferroelectric properties have also been studied. Because the crystallinity and density increase with the increase of sintering temperature, the composite ceramic sintered at 1200 °C shows the best dielectric properties. It is found that sintering temperature has little effect on the ferroelectric and magnetic properties of ceramics. Taking the CoFe₂O₄/BaTiO₃ composite ceramic sintered at 1200 °C as an example, derived from the interaction between the ferromagnetic CoFe₂O₄ phase and ferroelectric BaTiO₃ phase, the applied magnetic field lead to the reduction of P_r and E_c.     

Exchange-coupling effect in hard/soft SrTb0.01Tm0.01Fe11.98O19/AFe2O4 (where A = Co,Ni, Zn,Cu and Mn) composites

In this study, series of hard/soft SrTb_0.01Tm_0.01Fe_11.98O₁₉/AFe₂O₄ (where A = Co, Ni, Zn, Cu and Mn) composites were fabricated via a single-pot citrate sol-gel approach. The structure, morphology and magnetic properties of prepared composite samples were investigated via X-ray diffraction (XRD), scanning and transmission electron microscopes (SEM - TEM) and vibrating sample magnetometer (VSM). The XRD analysis of all composite samples showed the co-existence of both hard (Sr hexaferrite) and soft (spinel ferrites) ferrite phases with minor impurity. TEM micrographs displayed well-distinguished particles of SrM and AFe₂O₄ with different symmetry. The magnetic M − H hysteresis loops were performed at room temperature (RT; T = 300 K) and low temperature (T = 10 K) using VSM instrument. The magnitudes of various magnetic parameters including saturation magnetization (M_s), squareness ratio (SQR = M_r/M_s), remanence (M_r) and coercivity (H_c) were determined. M − H loops revealed smoothed curves and the dM/dH versus H curves exposed only a single peak, indicating that the exchange-coupling effect was accomplished in one-step. Moreover, the various composites showed relatively high M_s, M_r, and H_c values. The obtained results revealed the occurrence of exchange-coupling effect among soft and hard magnetic phases. The magnetic properties of various hard/soft SrTb_0.01Tm_0.01Fe_11.98O₁₉/AFe₂O₄ composites (where A = Co, Ni, Zn, Cu and Mn) were evaluated also by ZFC-FC magnetization measurements with respect to different soft phases. A peak temperature in ZFC curves occurred for various prepared composites. This peak is attributed to competition of the movement of magnetic domain walls and thermal activation. The present study offers a simple but efficient route for the fabrication of exchange-coupled nanocomposites with the chemical formula SrFe_11.98Tb_0.01Tm_0.01O₁₉/AFe₂O₄ (where A = Co, Ni, Zn, Cu and Mn) having controllable magnetic properties. It was found that the SrTb_0.01Tm_0.01Fe_11.98O₁₉/CoFe₂O₄ composite sample displayed the strongest exchange-coupling behavior among the different prepared composite products.     

Influence of cobalt ferrite content on the structure and magnetic properties of (CoFe2O4)X (SiO2-PVA)100-X nanocomposites

(CoFe₂O₄)_X(SiO₂-PVA)_100-X (X = 5, 25, 50, 75 and 95%) nanocomposites were prepared via sol-gel route and annealed at 700 and 1100 °C. The influence of CoFe₂O₄ content on the structure, morphology and magnetic properties of nanocomposites was studied. X-ray diffraction patterns, Mössbauer and Fourier transform infrared spectra revealed the formation of CoFe₂O₄ as unique magnetic phase. The crystallinity degree increases with the CoFe₂O₄ content and the annealing temperature. Transmission electron microscopy images revealed the spherical shape of the obtained nanocomposites. Mössbauer spectra exhibit typical magnetic sextets, allowing the calculation of the cations distribution among tetrahedral and octahedral sites and the stoichiometry of CoFe₂O₄. A strong correlation between the particle morphology and the magnetic properties of nanocomposites was found. The highest saturation magnetization was identified for (CoFe₂O₄)₉₅(SiO₂-PVA)₅ nanocomposite.     

Optimization,structural, optical and magnetic properties of TiO2/CoFe2O4 nanocomposites

Magneto-optical TiO₂/xCoFe₂O₄ nanocomposites having various concentrations of CoFe₂O₄ (x = 2, 4 and 6 wt %) were prepared using facile mechanical mixing. X-ray diffraction was employed for the phase examination and microstructure parameters. X-ray diffraction spectra proved the formation of two separate phases: tetragonal titanium dioxide (TiO₂) and face-centered cubic cobalt iron oxide. The structure was further verified by recognizing the selected area electron diffraction (SAED) pattern recorded by a high-resolution transmission microscope. The optical investigation of the prepared nanocomposites verified that the optical band gap values varied from 3.1 eV for pure TiO₂ to 3.05 eV for TiO₂/CoFe₂O₄ (6 wt %). The refractive index, optical dielectric constant and loss factor were discussed in detail. The nanocomposites (TiO₂/xCoFe₂O₄) demonstrated ferromagnetic characteristics and their magnetic parameters were affected by the CoFe₂O₄ percentage in the composites. The sample x = 2 wt % depicted the maximum magnetic exchange bias at room temperature. Moreover, it showed maximum coercivity (H_C) and magnetic squareness ratio (SQ), which makes it suitable for spintronic applications.     

Facile micro-patterning of ferromagnetic CoFe2O4 films using a combined approach of sol–gel method and UV irradiation

CoFe₂O₄ photosensitive sol was prepared using iron nitrate and cobalt nitrate as precursors, acetyl acetone as a chelating agent, and ethanol as a solvent. CoFe₂O₄ photosensitive sol was used to fabricate smooth and micro-patterned CoFe₂O₄ films. The effects of UV irradiation on the crystallinity, surface morphology and ferromagnetic properties of CoFe₂O₄ films were investigated. For the film prepared using conventional sol-gel process, the crystallization of spinel CoFe₂O₄ phase was completely finished at ~ 600?℃, and no intermediate phase was formed. However, when the sol-gel process was combined with UV irradiation, Fe₂O₃ and CoO intermediate phases were firstly generated, and then reacted to form CoFe₂O₄ phase. Facile micro-patterning of CoFe₂O₄ films can be realized using a combined approach of sol-gel method and UV irradiation without using any photoresist. The structure and functional properties of the CoFe₂O₄ film have not been affected during the patterning process, and its magnetic properties have also not been changed.     

Structural,morphological and magnetic parameters investigation of multiferroic (1-x)Bi2Fe4O9- xCoFe2O4 nanocomposite ceramics

(1-x)Bi₂Fe₄O₉- xCoFe₂O₄ (0.0≤ x ≤1.0) multiferroic nanocomposites were prepared by wet chemical procedures combining reverse chemical co-precipitation and Pechini-type sol–gel techniques followed by mechanical blending process. The XRD and SAED results showed that the diffraction patterns are perfectly indexed to the constituent phases present in composite samples. The crystallite sizes of the constituent phases were 35.4 and 39.4 nm for cobalt and bismuth ferrites, respectively. The characteristic peaks in FT-IR spectra confirmed formation and purity of all specimens. FESEM micrographs revealed the uniform phase distribution with the mean grain size of approximately 40 and 230 nm for CoFe₂O₄ and Bi₂Fe₄O₉, respectively. TEM micrograph indicated suitable distribution in the as-prepared composite sample. The VSM results revealed that saturation and remnant magnetization increase by increasing CFO content in composites. Based on the results obtained from M-H curves, magnetic properties of composites did not originate only from linear combination of parent phases. The recorded coercivity values of all nanocomposites, for example 1443 Oe for x = 0.4 were higher than those of each parent phase i.e. 708 Oe for CoFe₂O₄ and 149 Oe for Bi₂Fe₄O_9, showing a noticeable improvement in magnetic properties.     

Targeted design of polyaniline-graphene oxide,barium-strontium titanate,hard-soft ferrite,and polyester multi-phase nanocomposite for highly efficient microwave absorption

The current paper focuses on synthesizing a high-efficiency microwave absorber via incorporating the nanofillers of graphene oxide-polyaniline (GO-PANI), barium-strontium titanate (BST), and soft-hard ferrite within the polyester matrix. The nanocomposite magnets of (Ba_0.5Sr_0.5Fe₁₂O₁₉)_1-x hard/(CoFe₂O₄)_x soft (x = 0.2, 0.5, and 0.8) were prepared using sol-gel auto-combustion method. The GO-PANI and BST were successfully synthesized by in situ polymerization and improved polymerization, respectively. The phase structure, chemical structure, morphology, and microwave absorption properties of the synthesized nanocomposites were characterized by X-ray diffractometer (XRD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscope (SEM), vector network analyzer (VNA) techniques, respectively. The results showed that the synergistic effects of the combination of dielectric (BST), conductive (GO-PANI), and magnetic materials (hard-soft ferrites) provided the reflection loss values of less than ?20 dB (>99% absorption) in the X-band region. The minimum reflection loss of ?35 dB (>99.99% absorption) was obtained by the optimal formulation including (Ba_0.5Sr_0.5Fe₁₂O₁₉)_0.2 (CoFe₂O₄)_0.8, and the weight ratio of 1: 2 for both BST/soft-hard ferrite and hard-soft ferrite + BST/GO-PANI with the thickness of 1 mm. According to the results, the thickness factor plays a key role in improving the impedance matching. Consequently, the proposed nanocomposite can be employed as a novel kind of microwave absorbers with good impendence matching and high absorption.     

Lanthanum-doped spinel cobalt ferrite (CoFe2O4) nanoparticles for environmental applications

Magnetic nanomaterials have been widely studied as adsorbents in the removal of contaminants from effluents. In this context, lanthanum-doped cobalt ferrites (CoLa_xFe_2-xO₄) were successfully synthesized via sol-gel method at 300 °C. XRD, TEM and BET analyses showed that minute particle size was achieved, with decreases along increasing La³⁺ content. XRD patterns confirm single cubic spinel CoFe₂O₄ nanoparticles. The average crystallite size confirmed via TEM images ranges between 5 nm and 12 nm. Surface area increased from 74.3 to 109.3 m² g⁻¹ with the addition of La³⁺. Raman spectra indicate a tendency towards inversion of the spinel induced by the addition of the lanthanide. The optical band gap of the samples doped with La showed a progressive decrease from 1.35 to 1.1 eV, which was not expected. Hysteresis loops indicate a transition from hard to soft magnetism. A significant decrease in coercivity from 740 to 158 Oe was observed with increase in La³⁺ (CoFe₂O₄ to CoLa_0.025Fe_1.975O₄). Total magnetization (M* defined for maximum available field H = 20 kOe) decayed from 44.6 to 29.0 emu.g⁻¹. These results show that the produced nanoparticles are ideally suited as magnetic adsorbents in separation of pollutants from wastewater.     

Preparation of novel hydrophobic magnetic Fe3O4/waterborne polyurethane nanocomposites

Magnetic Fe₃O₄/waterborne polyurethane nanocomposites were synthesized based on waterborne polyurethane (WPU) and amino-functionalized Fe₃O₄ by in situ polymerization. The Fe₃O₄ nanoparticle was found to be uniformly distributed in Fe₃O₄/WPU nanocomposites with linear or crosslinked structure. In addition, the formation mechanism and magnetic conduction mechanism of stable inorganic–organic nanocomposites were discussed. The experimental results showed that the thermal stability, magnetic, and mechanical properties of magnetic Fe₃O₄/waterborne polyurethane nanocomposites were improved by amino functionalized Fe₃O₄. Furthermore, the defoaming property of the emulsion and the hydrophobic property of magnetic Fe₃O₄/waterborne polyurethane nanocomposites were improved by the 1-hexadecanol-terminated prepolymer. What more, polycaprolactone (PCL)-based Fe₃O₄/WPU nanocomposites have excellent mechanical properties (The tensile strength is over 30 MPa, the elongation rate is above 300%.) and magnetic properties. Magnetic Fe₃O₄/waterborne polyurethane nanocomposites will be used in the field of hydrophobic and microwave absorbent materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48546.     

Sonochemical synthesis of CoFe2O4 nanoparticles and their application in magnetic polystyrene nanocomposites

CoFe₂O₄ (CoFe) nanoparticles were synthesized via a facile surfactant-free sonochemical reaction. For preparation of magnetic polymeric films, CoFe₂O₄ nanoparticles were added to polystyrene (PS). Nanoparticles were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Magnetic properties of the samples were investigated using an alternating gradient force magnetometer (AGFM). CoFe₂O₄ nanoparticles exhibit a ferromagnetic behaviour with a saturation magnetization of 62 emu/g and a coercivity of 640 Oe at room temperature. By preparing magnetic films the coercivity is increased. The coercivity of PS/CoFe₂O₄ (10%) nanocomposites is higher than that obtained for PS/CoFe₂O₄ (30%).     

Synthesis of magnetically recoverable ferrite (MFe2O4, M Co,Ni and Fe)-supported TiO2 photocatalysts for decolorization of methylene blue

Effects of ferrite materials as supports (CoFe₂O₄, NiFe₂O₄, and Fe₃O₄) on nano-TiO₂ were elucidated by their use in the oxidation of methylene blue. These photocatalysts, which were synthesized by co-precipitation, were characterized by XRD, SEM, EDS and VSM. The crystalline phase of TiO₂ onto magnetic MFe₂O₄ was formed by anatase and rutile. TiO₂/CoFe₂O₄ exhibited the strongest magnetic property of the prepared catalysts, and the photocatalytic efficiencies followed the order TiO₂/CoFe₂O₄ > TiO₂/NiFe₂O₄ > TiO₂/Fe₃O₄. MB decolorization was enhanced with the amount of TiO₂ on the photocatalyst, and was moderately affected by the extent of structural distortion of ferrite supports.     

Impact of rare earth europium (RE-Eu3+) ions substitution on microstructural,optical and magnetic properties of CoFe2−xEuxO4 nanosystems

In this study, pure cobalt ferrite (CoFe₂O₄) nanoparticles and europium doped CoFe₂O₄ (CoFe_2−xEu_xO₄; x = 0.1, 0.2, 0.3) nanoparticles were synthesized by the precipitation and hydrothermal approach. The impact of replacing trivalent iron (Fe³⁺) ions by trivalent rare earth europium (RE-Eu³⁺) ions on the microstructure, optical and magnetic properties of the produced CoFe₂O₄ nanoparticles was studied. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectra exposed the consistency of a single cubic phase with the evidence of Eu₂O₃ phases for x ≥ 0.2. FTIR transmittance spectra showed that, the all investigated samples have three characteristic metal-oxygen bond vibrations corresponding to octahedral B-site (υ₁ and υ₂) and tetrahedral A-site (υ₃) around 415 cm⁻¹, 470 cm⁻¹ and 600 cm⁻¹ respectively. XRD and energy dispersive X-ray spectroscopy studies affirmed the integration of RE-Eu³⁺ ions within CoFe₂O₄ host lattice and decrease of average crystals size from 13.7 nm to 4.7 nm. Transmission electron microscopy (TEM) analysis showed the crucial role played by RE-Eu³⁺ added to CoFe₂O₄ in reducing the particle size below 5 nm in agreement with XRD analysis. High resolution-TEM (HR-TEM) analysis showed that the as-synthesized spinel ferrite, i.e., CoFe_2−xEu_xO₄, nanoparticles are single-crystalline with no visible defects. In addition, the HR-TEM results showed that pure and doped CoFe₂O₄ have well-resolved lattice fringes and their interplanar spacings matches that obtained by XRD analysis. Magnetic properties investigated by the vibrating sample magnetometer technique illustrated transformation of magnetic state from ferromagnetic to superparamagnetic at 300 K resulting in introducing RE-Eu³⁺ in CoFe₂O₄ lattice. At low temperature (~5 K) the magnetic order was ferromagnetic for both pure and doped CoFe₂O₄ samples. Substitution of Fe³⁺ ions in CoFe₂O₄ nanoparticles with RE-Eu³⁺ ions optimizes the sample nanocrystals size, cation distribution and magnetic properties for many applications.