Construction of g-C3N4/TiO2/Ag composites with enhanced visible-light photocatalytic activity and antibacterial properties

In this study, the multifunctional carbon nitride based composite graphitic-C₃N₄ (g-C₃N₄)/TiO₂/Ag was prepared through a simple and efficient vacuum freeze-drying route. TiO₂ and Ag nanoparticles were demonstrated to decorate onto the surface of g-C₃N₄ sheet. In the ultraviolet–visible absorption test, a narrower band gap and red-shift of light absorption edge were observed for g-C₃N₄/TiO₂/Ag compared to pristine g-C₃N₄ and single-component modified g-C₃N₄/TiO₂. The photodegradation property of g-C₃N₄/TiO₂/Ag was investigated toward the degradation of methylene blue (abbreviated as MB) under the irradiation of visible light. These results indicated that the degradation performance of organic dyes for g-C₃N₄/TiO₂/Ag was obviously improved compared with g-C₃N₄/TiO₂ and g-C₃N₄. The reaction rate constant of MB degradation for g-C₃N₄/TiO₂/Ag was 4.24 times higher than that of pristine g-C₃N₄. In addition, such rationally constructed nanocomposite presented evidently enhanced antibacterial performance against the Gram-negative Escherichia coli. Concentration dependent antibacterial performance was systematically investigated. And 84% bacterial cell viability loss had been observed at 500 μg/mL g-C₃N₄/TiO₂/Ag within 2 h visible light irradiation.     

Novel spindle-shaped nanoporous TiO2 coupled graphitic g-C3N4 nanosheets with enhanced visible-light photocatalytic activity

Highly efficient visible-light-driven heterojunction photocatalysts, spindle-shaped nanoporous TiO₂ coupled with graphitic g-C₃N₄ nanosheets have been synthesized by a facile one-step solvothermal method. The as-prepared photocatalysts were characterized by X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption analysis and UV–vis diffuse reflectance spectrometry (DRS), proving a successful modification of TiO₂ with g-C₃N₄. The results showed spindle-shaped nanoporous TiO₂ microspheres with a uniform diameter of about 200 nm dispersed uniformly on the surface of graphitic g-C₃N₄ nanosheets. The g-C₃N₄/TiO₂ hybrid materials exhibited higher photocatalytic activity than either pure g-C₃N₄ or nanoporous TiO₂ towards degradation of typical rhodamine B (RhB), methyl blue (MB) and methyl orange (MO) dyes under visible light (>420 nm), which can be largely ascribed to the increased light absorption, larger BET surface area and higher efficient separation of photogenerated electron–hole pairs due to the formation of heterostructure. In addition, the possible transferred and separated behavior of electron–hole pairs and photocatalytic mechanisms on basis of the experimental results are also proposed in detail.     

TiO2@g-C3N4 core/shell spheres with uniform mesoporous structures for high performance visible-light photocatalytic application

Mesoporous g-C₃N₄ nanosheets (MCN) with uniform pore size were utilized to decorate mesoporous TiO₂ spheres (TSs) to form a core-shell heterojunction photocatalyst containing uniform mesopores. Moreover, the mesoporous g-C₃N₄ nanosheets served as shells for composites, in addition to playing a pivotal function for the regulation of the pore structure of the composite. The mesoporous TiO₂@g-C₃N₄ core/shell structure having a uniform pore size exhibited high surface area of ∼134 m²/g. This coupled material with improved porosity, not only led to increased visible-light absorption but also led to the enhanced charge generation/separation. In addition, it showed a lengthy cycling stability with highly active visible-light efficiency to degrade Rhodamine B (RhB) dye.     

Preparation and photocatalytic activity of g-C3N4/TiO2 heterojunctions under solar light illumination

The solar light sensitive g-C₃N₄/TiO₂ heterojunction photocatalysts containing 20, 50, 80, and 90 wt% graphitic carbon nitride (g-C₃N₄) were prepared by growing Titania (TiO₂) nanoparticles on the surfaces of g-C₃N₄ particles via one step hydrothermal process. The hydrothermal reactions were allowed to take place at 110 °C at autogenous pressure for 1 h. Raman spectroscopy analyses confirmed that an interface developed between the surfaces of TiO₂ and g-C₃N₄ nanoparticles. The photocatalyst containing 80 wt% g-C₃N₄ was subsequently heat treated 1 h at temperatures between 350 and 500 °C to improve the photocatalytic efficiency. Structural and optical properties of the prepared g-C₃N₄/TiO₂ heterojunction nanocomposites were compared with those of the pristine TiO₂ and pristine g-C₃N₄ powders. Photocatalytic activity of all the nanocomposites and the pristine TiO₂ and g-C₃N₄ powders were assessed by the Methylene Blue (MB) degradation test under solar light illumination. g-C₃N₄/TiO₂ heterojunction photocatalysts exhibited better photocatalytic activity for the degradation of MB than both pristine TiO₂ and g-C₃N₄. The photocatalytic efficiency of the g-C₃N₄/TiO₂ heterojunction photocatalyst heat treated at 400 °C for 1 h is 1.45 times better than that of the pristine TiO₂ powder, 2.20 times better than that of the pristine g-C₃N₄ powder, and 1.24 times better than that of the commercially available TiO₂ powder (Degussa P25). The improvement in photocatalytic efficiency was related to i) the generation of reactive oxidation species induced by photogenerated electrons, ii) the reduced recombination rate for electron-hole pairs, and iii) large specific surface area.     

Constructing 0D/2D Z-Scheme Heterojunction of CdS/g-C3N4 with Enhanced Photocatalytic Activity for H2 Evolution

0D/2D Pt-C₃N₄/CdS heterojunction photocatalyst were fabricated with CdS quantum dots interspersed on g-C₃N₄ nanosheets via successive ionic layer absorption process. The obtained Pt-C₃N₄/CdS Z-scheme heterojunction with Pt cocatalyst deposited on g-C₃N₄ nanosheets exhibited H₂ production rate of 35.3 mmol g^?1 h^?1, which is 3.1 times higher than that of Pt-CdS/C₃N₄. The enhanced photocatalytic activity are attributed to the Z-scheme charge carrier transfer mechanism with stronger redox ability. The photocatalytic mechanism of the CdS/g-C₃N₄ composite is investigated and demonstrated in this work. It may provide unique insights to design 0D/2D Z-scheme heterojunction photocatalyst systems using a facile method for highly efficient H₂ production.

Graphic Abstract

Schematic illustration of charge transfer modulated by the metal cocatalyst selective deposition on heterojunction-type II (a) and direct Z-Scheme mechanisms (b) over the C₃N₄/CdS heterostructure composites under visible light irradiation.

     

Ti3C2@TiO2/g-C3N4 heterojunction photocatalyst with improved charge transfer for enhancing visible-light NO selective removal

Control of Nitrogen dioxide (NO₂) byproducts is of great importance for the photocatalytic NO removal and environmental remedy. However, individual semiconductor photocatalysts generally show limited capabilities for selective NO removal due to severe charge recombination and inadequate redox potentials. Herein, the cotton-like g-C₃N₄ was modified with Ti₃C₂@TiO₂ to construct a heterojunction photocatalyst Ti₃C₂@TiO₂/g-C₃N₄, which showed outperformed photocatalytic NO removal and MB degradation abilities compared to the individual photocatalysts under visible light irradiation. The UV–vis absorption spectra and photoluminescence (PL) spectra confirmed that Ti₃C₂@TiO₂/g-C₃N₄ photocatalyst was endowed with superior light utilization and separation/transfer ability of charge carriers due to the presence of n-n heterojunction and Schottky barrier. Furthermore, the g-C₃N₄, Ti₃C₂, and TiO₂ were closely contacted showing a high specific surface area, which promoted the charge transfer and the exposure of more active sites, further inducing the formation of more active species. Therefore, the designed photocatalyst delivered a high removal rate of NO and a suppressed discharge of NO₂. Notably, the photocatalyst Ti₃C₂@TiO₂/g-C₃N₄ also presented superior NO removal ability during the cycling experiment, indicating their outstanding stability and recyclability. Besides, the effects of active species were monitored using a trapping experiment to propose probable photocatalytic mechanism. This study could shed a new light to the design of photocatalyst for air purification in the future.     

Fabrication of g-C3N4/TiO2 heterojunction composite for enhanced photocatalytic hydrogen production

In this study, graphitic carbon nitride (g-C₃N₄) was successfully coupled with TiO₂ using hydrothermal method, to develop an advanced heterojunction photocatalyst. The interaction between g-C₃N₄ and TiO₂ was confirmed through analysis of X-Ray spectroscopy (XPS) C 1s, N 1s, O 1s high resolution core level spectra of g-C₃N₄, TiO₂ and g–C₃N₄–TiO₂ heterojucntion. Further, through valence band spectra analysis, conduction band offset (0.12 eV) and valence band offset (0.28 eV) of g–C₃N₄–TiO₂ heterojunction were estimated. Also, composite material was identified as type II heterojunction between g-C₃N₄ and TiO₂. XRD, UV–vis, BET and HRTEM were employed to understand the changes in physicochemical properties. Photocatalytic hydrogen production rates were evaluated through water splitting experiments. Under visible light irradiation highest hydrogen production rate was achieved for g–C₃N₄–TiO₂ heterojunction sample with high content of TiO₂, and was about 1041 μmol/g.h. The improved photocatalytic activity of the heterojunction material was explained in detail.     

Enhancement of photocatalytic and photoelectrochemical properties of BiOI nanosheets and silver quantum dots co-modified TiO2 nanorod arrays

In this study, TiO₂ nanorod arrays (TNR), Ag quantum dots (QDs) sensitized with TNR TiO₂/Ag, bismuth oxyhalide (BiOI) nanosheets, and Ag QDs co-modified with TNR and TiO₂/BiOI/Ag (TBA) were prepared by a stepwise process. The morphological, structural, compositional, optical, photocatalytic (PC), and photoelectrochemical (PEC) properties of the samples were investigated. The TBA-2 sample exhibited the highest photocurrent density (281.8 μA/cm²) and photodegradation efficiency (93.3%), with values 9.7 times and 2.25 times higher than those for TNR, respectively. The improvement in sample performance can be attributed to the formation of a heterojunction between BiOI and TiO₂, thereby enhancing the absorption of visible light and improving the charge separation efficiency; Ag QDs limit interfacial electron-hole pair recombination. The experimental results show that TBA can effectively promote light-induced carrier transport and visible light absorption, while inhibiting the recombination rate of the electron-hole pairs, PEC, and PC.     

Mesoporous BiVO4/2D-g-C3N4 heterostructures for superior visible light-driven photocatalytic reduction of Hg(II) ions

In this contribution, a Z-scheme mesoporous BiVO₄/g-C₃N₄ nanocomposite heterojunction with a considerable surface area and high crystallinity was synthesized by a simple soft and hard template-assisted approach. This material demonstrates superior visible light-driven photocatalysis for the photoreduction of Hg(II) ions. TEM and XRD results show that the mesoporous BiVO₄ NPs, with a monoclinic phase and an ellipsoid-like shape, are highly dispersed onto the porous 2D surfaces of g-C₃N₄ nanosheets with a particle size of 5–10 nm. The obtained BiVO₄/g-C₃N₄ nanocomposites with a p-n heterojunction show significantly enhanced Hg(II) photoreduction efficiency compared to the mesoporous BiVO₄ NPs and pristine g-C₃N₄. Among all synthesized photocatalysts, the 1.2% BiVO₄/g-C₃N₄ nanocomposite indicated the highest photoreduction of Hg(II) performance, reaching ~ 100% within 60 min; this result is 3.9 and 4.5 –fold larger than that of the BiVO₄ NPs and pristine g-C₃N₄. The Hg(II) photoreduction rates highly increase to 208.90, 314.95, 411.23 and 418.68 μmol g⁻¹min⁻¹ for the mesoporous 0.4, 0.8, 1.2 and 1.6% BiVO₄/g-C₃N₄ nanocomposites, respectively. The reduction rate of the mesoporous 1.2% BiVO₄/g-C₃N₄ nanocomposite demonstrated a 5.2 and 3.8 times larger increase than that of the pristine g-C₃N₄ nanosheets and pure BiVO₄ NPs. The superior Hg(II) photoreduction efficiency was ascribed to decreased carrier recombination and the improved utilization of visible light by constructing BiVO₄/g-C₃N₄ nanocomposites with a p-n junction. Transient photocurrent measurement and photoluminescence spectra were employed to confirm the possible Hg(II) photoreduction mechanism over these BiVO₄/g-C₃N₄ photocatalysts. This research provides an accessible route for the nanoengineered design of mesoporous BiVO₄/g-C₃N₄ heterostructures that demonstrated unique photocatalytic performance.     

Rapid synthesis and characterization of advanced ceramic-polymeric nanocomposites for efficient photocatalytic decontamination of hazardous organic pollutant under visible light and inhibition of microbial biofilm

Ceramic-polymeric 3C–silicon carbide-graphitic carbon nitride (3C–SiC@g-C₃N₄) nanocomposites were synthesized by decorating cubic phased, ceramic 3C-Silicon carbide (3C–SiC) on the framework of the nanosheets of metal free polymeric graphitic carbon nitride (g-C₃N₄) by single step pulsed laser ablation in liquid (PLAL) method. Morphological, structural, elemental and optical characterizations of the synthesized 3C–SiC@g-C₃N₄ nanocomposites were carried out. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Transmission electron microscope (TEM) and high-resolution transmission electron microscope (HRTEM) studies confirm the perfect anchoring of 3C–SiC on g-C₃N₄ nanosheets in 3C–SiC@g-C₃N₄ nanocomposites synthesized by PLAL method. Ultra-violet diffuse reflectance spectra (UV-DRS) of 3C–SiC@g-C₃N₄ indicated the enhancement of visible light absorption and also the narrowing down of band gap energy in 3C–SiC@g-C₃N₄ nanocomposites, as a result of the anchoring of 3C–SiC on g-C₃N₄. Also we noticed the decrease of photoluminescence (PL) emission intensities in the PL spectra of 3C–SiC@g-C₃N₄ with respect to pure g-C₃N₄, which indicates the reduced photo-induced charge recombination by the presence of 3C–SiC content on g-C₃N₄ nanosheets. In the application side, PLAL synthesized 3C–SiC@g-C₃N₄ nanocomposites exhibited enhanced visible light driven photocatalytic degradation of methylene blue dye in water, improved antibacterial activity against Pseudomonas aeruginosa (gram-negative) and Staphylococcus aureus (gram-positive) bacteria, and also served as better inhibiting agent for biofilm formation, compared to pure g-C₃N₄ nanosheets. It is quite obvious from our studies that this ceramic-polymeric nanocomposite, 3C–SiC@g-C₃N₄ has the potential application for antibacterial and anti-biofilm activities in addition to its remarkable photocatalytic performance.     

Rational design of MoS2/g-C3N4/ZnIn2S4 hierarchical heterostructures with efficient charge transfer for significantly enhanced photocatalytic H2 production

The rational design of hierarchical heterojunction photocatalysts with efficient spatial charge separation remains an intense challenge in hydrogen generation from photocatalytic water splitting. Herein, a noble-metal-free MoS₂/g-C₃N₄/ZnIn₂S₄ ternary heterostructure with a hierarchical flower-like architecture was developed by in situ growth of 3D flower-like ZnIn₂S₄ nanospheres on 2D MoS₂ and 2D g-C₃N₄ nanosheets. Benefiting from the favorable 2D-2D-3D hierarchical heterojunction structure, the resultant MoS₂/g-C₃N₄/ZnIn₂S₄ nanocomposite loaded with 3 wt% g-C₃N₄ and 1.5 wt% MoS₂ displayed the optimal hydrogen evolution activity (6291 μmol g^?1 h^?1), which was a 6.96-fold and 2.54-fold enhancement compared to bare ZnIn₂S₄ and binary g-C₃N₄/ZnIn₂S₄, respectively. Structural characterizations reveal that the significantly boosted photoactivity is closely associated with the multichannel charge transfer among ZnIn₂S₄, MoS₂, and g-C₃N₄ components with suitable band-edge alignments in the composites, where the photogenerated electrons migrate from g-C₃N₄ to ZnIn₂S₄ and MoS₂ through the intimate heterojunction interfaces, thus enabling efficient electron-hole separation and high photoactivity for hydrogen evolution. In addition, the introduction of MoS₂ nanosheets highly benefits the improved light-harvesting capacity and the reduced H₂-evolution overpotential, further promoting the photocatalytic H₂-evolution performance. Moreover, the MoS₂/g-C₃N₄/ZnIn₂S₄ ternary heterostructure possesses prominent stability during the photoreaction process owing to the migration of photoinduced holes from ZnIn₂S₄ to g-C₃N₄, which is deemed to be central to practical applications in solar hydrogen production.     

One-dimensional spindle-like BiVO4/TiO2 nanofibers heterojunction nanocomposites with enhanced visible light photocatalytic activity

One-dimensional spindle-like BiVO₄/TiO₂ nanofibers heterojunction nanocomposites with high visible light photocatalytic activity have been successfully obtained by combining the electrospinning technique and solvothermal method. The as-obtained products were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV–vis spectra and photoluminescence (PL) spectra. The results revealed that spindle-like BiVO₄ nanostructures were successfully grown on TiO₂ nanofibers. Photocatalytic tests showed that the BiVO₄/TiO₂ nanofibers heterojunction nanocomposites showed enhanced visible light photocatalytic activity than that of pure TiO₂ nanofibers, which might be attributed to the effective photogenerated electrons-holes separation based on the photosynergistic effect of the BiVO₄/TiO₂ heterojunction. Moreover, the BiVO₄/TiO₂ nanofibers heterojunction nanocomposites could be easily recycled without any decrease of the photocatalytic activity.     

0D CoP cocatalyst/ 2D g-C3N4 nanosheets: An efficient photocatalyst for promoting photocatalytic hydrogen evolution

In this work, cobalt phosphide (CoP) nanoparticles were successfully decorated on an ultrathin g-C₃N₄ nanosheet photocatalysts by in situ chemical deposition. The built-in electric field formed by heterojunction interface of the CoP/g-C₃N₄ composite semiconductor can accelerate the transmission and separation of photogenerated charge-hole pairs and effectively improve the photocatalytic performance. TEM, HRTEM, XPS, and SPV analysis showed that CoP/g-C₃N₄ formed a stable heterogeneous interface and effectively enhanced photogenerated electron-hole separation. UV-vis DRS analysis showed that the composite had enhanced visible light absorption than pure g-C₃N₄ and was a visible light driven photocatalyst. In this process, NaH₂PO₂ and CoCl₂ are used as the source of P and Co, and typical preparation of CoP can be completed within 3 hours. Under visible light irradiation, the optimal H₂ evolution rate of 3.0 mol% CoP/g-C₃N₄ is about 15.1 μmol h⁻¹. The photocatalytic activity and stability of the CoP/g-C₃N₄ materials were evaluated by photocatalytic decomposition of water. The intrinsic relationship between the microstructure of the composite catalyst and the photocatalytic performance was analyzed to reveal the photocatalytic reaction mechanism.     

One-pot-solid preparation of novel three-dimensional FexS1-x/g-C3N4 heterostructures for efficient photocatalytic mixed-pollutants removal

In order to overcome the problem of low photocatalytic rate of g-C₃N₄, the 3D Fe_xS_1-x/g-C₃N₄ heterojunction was prepared via a simple one-pot solid method. The X-Ray Diffraction (XRD) and scanning electron microscope (SEM) results demonstrated that the Fe_xS_1-x/g-C₃N₄ heterojunction was established and a g-C₃N₄ nanosheet was tightly bound to Fe_xS_1-x. Compared with g-C₃N₄ samples, Fe_xS_1-x coupling resulted in substantial enhancement of visible light absorption, moreover, the bandwidth of heterojunction was also expanded. In addition to effectively degrading RhB and reducing Cr(VI), the redox performance of Fe_xS_1-x/g-C₃N₄ was also increased in the Cr(VI)/RhB mixed system. Based on a variety of experimental results, the enhanced synergistic photocatalytic activity of the 3D Fe_xS_1-x/g-C₃N₄ heterojunction was attributed to enhancement of the separation of e^- and h⁺ in FeS_2, which resulted from the effective conversion of FeS into FeS₂ under UV-light irradiation. The type II heterojunction structure that was produced via one-pot solid fabrication also inhibited the recombination of electron/hole pairs. Fe_xS_1-x doping and heterojunction building improve the photocatalysis capacity of g-C₃N₄ and broaden the visible-light response of pure g-C₃N₄.     

Carbon-based TiO2-x heterostructure nanocomposites for enhanced photocatalytic degradation of dye molecules

Application of brown titanium dioxide (TiO_2-x) and its modified composite forms in the photocatalytic decomposition of organic pollutants in the environment is a promising way to provide solutions for environmental redemption. Herein, we report the synthesis of effective and stable TiO_2-x nanoparticles with g-C₃N₄, RGO, and multiwalled carbon nanotubes (CNTs) using a simple hydrothermal method. Among all the as-synthesized samples, excellent photocatalytic degradation activity was observed for RGO-TiO_2-x nanocomposite with high rate constants of 0.075 min^?1_, 0.083 min^?1 and 0.093 min^?1 for methylene blue, rhodamine-B, and rosebengal dyes under UV–Visible light irradiation, respectively. The altered bandgap (1.8 eV) and the large surface area of RGO-TiO_2-x nanocomposite impacts on both absorption of visible light and efficiency of photogenerated charge electron (e^?)/hole (h⁺) pair separation. This resulted in enhanced photocatalytic property of carbon-based TiO_2-x nanocomposites. A systematic study on the influence of different carbon nanostructures on the photocatalytic activity of brown TiO_2-x is carried out.     

Ag nanoparticles loaded TiO2/MWCNT ternary nanocomposite: A visible-light-driven photocatalyst with enhanced photocatalytic performance and stability

A visible light active photocatalyst, Ag/TiO₂/MWCNT was synthesized by loading of Ag nanoparticles onto TiO₂/MWCNT nanocomposite. The photocatalytic activity of Ag/TiO₂/MWCNT ternary nanocomposite was evaluated for the degradation of methylene blue dye under UV and visible light irradiation. Ag/TiO₂/MWCNT ternary nanocomposite exhibits (~9 times) higher photocatalytic activity than TiO₂/MWCNT and (~2 times) higher than Ag/TiO₂ binary nanocomposites under visible light irradiation. The enhancement in the photocatalytic activity is attributed to the synergistic effect between Ag nanoparticles and MWCNT, which enhance the charge separation efficiency by Schottky barrier formation at Ag/TiO₂ interface and role of MWCNT as an electron reservoir. Effect of different scavengers on the degradation of methylene blue dye in the presence of catalyst has been investigated to find the role of photogenerated electrons and holes. Simultaneously, the Ag/TiO₂/MWCNT shows excellent photocatalytic stability. This work highlights the importance of Ag/TiO₂/MWCNT ternary nanocomposite as highly efficient and stable visible-light-driven photocatalyst for the degradation of organic dyes.     

TiO2 nanofibers assembled on graphene-silver platform as a visible-light photo and bio-active nanostructure

The heterogeneous titanium oxide-reduced graphene oxide-silver (TiO₂/RGO/Ag) nanocomposites were successfully prepared by incorporation of two dimensional (2D) RGO nanosheets and spherical silver nanoparticles (NPs) into the 1D TiO₂ nanofibers. The novel TiO₂/RGO/Ag nanocomposites were synthesized by loading TiO₂ nanofibers, prepared via electrospinning technique, on the RGO/Ag platform. The resulting nanocomposites have been characterized using various techniques containing transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and ultra-violet-visible (UV–vis) spectroscopy. Microscopic studies clearly verified the existence of TiO₂ nanofibers with Ag NPs on the surface of RGO sheet and formation of TiO₂/RGO/Ag nanocomposites. Moreover, the results of UV–vis spectroscopy demonstrated that TiO₂/RGO/Ag nanocomposites extended the light absorption spectrum toward the visible region and significantly enhanced the visible-light photocatalytic performance of the prepared samples on degradation of rhodamine B (Rh. B) as a model dye. It was found that, incorporation of 50 µl RGO/Ag into the TiO₂ nanofibers lead to a maximum photocatalytic performance. Also, the improvement of the inactivation of Escherichia coli (E. coli) bacteria under visible-light irradiation was revealed by introduction of RGO/Ag into the TiO₂ matrix. The significant enhancement in the photo and bio-activity of TiO₂/RGO/Ag nanocomposites under visible-light irradiation can be ascribed to the RGO/Ag content by acting as electron traps in TiO₂ band gap.     

Facile one-step synthesis of pellet-press-assisted saddle-curl-edge-like g-C3N4 nanosheets for improved visible-light photocatalytic activity

Graphitic carbon nitride (g-C₃N₄) has attracted increasing interest as a visible-light-active photocatalyst. In this study, saddle-curl-edge-like g-C₃N₄ nanosheets were prepared using a pellet presser (referred to as g-CN P nanosheets). Urea was used as the precursor for the preparation of g-C₃N₄. Thermal polymerization of urea in a pellet form significantly affected the properties of g-C₃N₄. Systematic investigations were performed, and the results for the modified g-C₃N₄ nanosheets are presented herein. These results were compared with those for pristine g-C₃N₄ to identify the factors that affected the fundamental properties. X-ray diffraction analysis and high-resolution transmission electron microscopy revealed a crystallinity improvement in the g-CN P nanosheets. Fourier-transform infrared spectroscopy provided clear information regarding the fundamental modes of g-C₃N₄, and X-ray photoelectron spectroscopy (XPS) peak-fitting investigations revealed the variations of C and N in detail. The light-harvesting property and separation efficiency of the photogenerated charge carriers were examined via optical absorption and photoluminescence studies. The valence band edge and conduction band edge potentials were calculated using XPS, and the results indicated a significant reduction in the bandgap for the g-CN P nanosheets. The Brunauer–Emmett–Teller surface area increased for the g-CN P nanosheets. The photocatalytic degradation performance of the g-CN P nanosheets was tested by applying a potential and using the classical dye Rhodamine B (RhB). The RhB dye solution was almost completely degraded within 28 min. The rate constant of the g-CN P nanosheets was increased by a factor of 3.8 compared with the pristine g-C₃N₄ nanosheets. The high crystallinity, enhanced light absorption, reduced bandgap, and increased surface area of the saddle-curl-edge-like morphology boosted the photocatalytic performance of the g-CN P nanosheets.     

Visible-light-driven Ni3FeN/g-C3N4 Z-scheme heterostructure for remarkable photocatalytic water splitting

It is very essential to grow efficient and abundant photocatalysts for overall water cracking to produce hydrogen. Ni₃FeN nanosheets were synthesized by combining simple sol–gel and calcining methods using urea as nitrogen source. A heterostructure was constructed between Ni₃FeN and g-C₃N₄ to enhance the absorption capacity of visible light. The reformed Z-scheme Ni₃FeN/g-C₃N₄ heterojunction exhibited an excellent visible-light photocatalytic activity. The average hydrogen evolution rate of 5 wt% Ni₃FeN/g-C₃N₄ composite is 528.7 μmol h⁻¹ g⁻¹ due to the Z-scheme Ni₃FeN/g-C₃N₄ junction, which promotes the separation of photogenerated e⁻/h⁺. Interestingly, the average H₂ production of Ni₃FeN/g-C₃N₄ is nearly 8.3 and 3.6 times higher than that of Fe₄N/g-C₃N₄ and Ni₄N/g-C₃N₄, respectively, indicating that bimetallic nitrides as cocatalysts are more conducive to enhancing the performance of photocatalysts. Importantly, the Ni₃FeN/g-C₃N₄ composite exhibited good cycle stability, and the hydrogen production performance hardly changed after four cycle experiments. Furthermore, photoluminescence, electrochemical impedance spectroscopy, and transient photocurrent response show that Ni₃FeN/g-C₃N₄ heterojunction improves the separation efficiency of photoinduced e⁻/h⁺. This work provides a feasibility of the cocatalyst Ni₃FeN for use in photocatalytic hydrogen production.     

Construction,structure and photocatalysis of janus nanofiber modified by g-C3N4 nanosheets heterostructure photocatalysts

The construction of photocatalyst with gradient band structure is guided by the principle of band gap engineering. Rational structural design is advanced and applied to construct a new-typed peculiarly structural and functional carbon-based [TiO₂/C]//[Bi₂WO₆/C] Janus nanofiber modified by g-C₃N₄ nanosheets heterostructure photocatalyst (denoted as TB-JgHP). The flexible carbon-based [TiO₂/C]//[Bi₂WO₆/C] Janus nanofiber with one side responding to ultraviolet light and the other capturing visible light is fabricated by conjugate electrospinning, and then g-C₃N₄ nanosheets are uniformly grown in-situ on the surface of the Janus nanofibers by using gas-solid reaction via gasification of urea. The optimized TB-JgHP possesses remarkable hydrogen evolution efficiency (17.48 mmol h⁻¹ g⁻¹) and methylene blue degradation rate (99.2%) under simulated sunlight illumination for 100 min, demonstrating prominent dual-functional characteristics. The enhanced photocatalytic performance benefits from the unique Janus structure as well as the synergistic effects among the triple heterostructures of TiO₂ and Bi₂WO₆, g-C₃N₄ and TiO₂, g-C₃N₄ and Bi₂WO₆. The formation of gradient band structure among heterostructures is more conducive to the multi-step separation of photo-induced electron-hole pairs and more effective absorption of light. Further, flexible self-standing carbon-based photocatalysts not only have outstanding electron transport performance, but also are easy to separate from solution with preeminent recyclable stability. Based on a series of characterization techniques, it is further proved that TB-JgHP has higher carrier separation efficiency than the counterpart contrast samples. The formation mechanism of TB-JgHP is proposed, and the construction technique is established. The design philosophy and construction technique presented in this work pave a new avenue for research and development of other heterostructure photocatalysts.