Optimization of mechanical pre-treatment of Laminariaceae spp. biomass-derived biogas

Macroalgae have not met their full potential to date as biomass for the production of energy. One reason is the high cost associated with the pretreatment which breaks the biomass's crystalline structure and better exposes the fermentable sugars to anaerobes. In the attempt to overcome this technological barrier, the performance of a Hollander beater mechanical pretreatment is assessed in this paper. This pretreatment has been applied to a batch of Laminariaceae biomass and inoculated with sludge from a wastewater treatment plant. The derived biogas and methane yields were used as the responses of a complex system in order to identify the optimal system input variables by using the response surface methodology (RSM). The system's inputs considered are the mechanical pretreatment time (5–15 min range), the machine's chopping gap (76–836 μm) and the mesophilic to thermophilic range of temperatures (30–50 °C). The mechanical pretreatment was carried out with the purpose of enhancing the biodegradability of the macroalgal feedstock by increasing the specific surface area available during the anaerobic co-digestion. The pretreatment effects on the two considered responses are estimated, discussed and optimized using the tools provided by the statistical software Design-Expert v.8. The best biogas yield of treated macroalgae was found at 50 °C after 10 min of treatment, providing 52% extra biogas and 53% extra methane yield when compared to untreated samples at the same temperature conditions. The highest biogas rate achieved by treating the biomass was 685 cc gTS⁻¹, which is 430 cc gTS⁻¹ in terms of CH₄ yield.     

Enhanced substrate degradation and methane yield with maleic acid pre-treatments in biomass crops and residues

Organic acids are envisaged as alternative catalysts to strong mineral acids, in pre-treatment of ligno-cellulosic biomass for anaerobic digestion (AD). To evaluate this hypothesis, an untreated control and four pre-treatments (25 °C for 24 h) involving two levels of maleic acid (34.8 and 69.6 kg m⁻³), alone and combined with sulphuric acid (4 kg m⁻³), were studied in three agricultural substrates: Arundo (aka giant reed), Barley straw and B133 fibre sorghum. Methane production was assessed in a batch AD assay (35 °C for 51 days) with 4 g L⁻¹ of volatile solid (VS) load. Fibre composition and structure were investigated through chemical analysis and Fourier transform infrared (FTIR) spectrometry. Arundo and B133 that were the most and least recalcitrant substrate, respectively, staged the highest and lowest increase in methane with high maleic acid: +62% over 218 cm³ g⁻¹ of VS in untreated Arundo; +36% over 284 cm³ g⁻¹ of VS in untreated B133. Barley straw showed an intermediate behaviour (+41% over 269 cm³ g⁻¹ of VS). H₂SO₄ addition to maleic acid did not improve CH₄ output. The large increase in methane yield determined by pre-treatments was reflected in the concurrent decrease of fibre (between 14 and 39% depending on fibrous component). Based on FTIR spectra, bands assigned to hemicellulose and cellulose displayed lower absorbance after pre-treatment, supporting the hypothesis of solubilisation of structural carbohydrates and change in fibre structure. Hence, maleic acid was shown a suitable catalyst to improve biodegradability of ligno-cellulosic biomass, especially in recalcitrant substrates as Arundo.     

Lignocellulosic ethanol production employing immobilized Saccharomyces cerevisiae in packed bed reactor

Most of ethanol production processes are limited by lower ethanol production rate and recyclability problem of ethanologenic organism. In the present study, immobilized co-fermenting Saccharomyces cerevisiae GSE1618 was employed for ethanol fermentation using rice straw enzymatic hydrolysate in a packed bed reactor (PBR). The immobilization of S. cerevisiae was performed by entrapment in Ca-alginate for optimization of ethanol production by varying alginic acid concentration, bead size, glucose concentration, temperature and hardening time. Remarkably, extra hardened beads (EHB) immobilized with S. cerevisiae could be used up to repeated 40 fermentation batches. In continuous PBR, maximum 81.82 g L⁻¹ ethanol was obtained with 29.95 g L⁻¹ h⁻¹ productivity with initial glucose concentration of 180 g L⁻¹ in feed at dilution rate of 0.37 h⁻¹. However, maximum ethanol concentration of 40.33 g L⁻¹ (99% yield) with 24.61 g L⁻¹ h⁻¹ productivity was attained at 0.61 h⁻¹ dilution rate in fermentation of un-detoxified rice straw enzymatic hydrolysate (REH). At commercial scale, EHB has great potential for continuous ethanol production with high productivity using lignocellulosic hydrolysate in PBR.     

Upgraded biofuel from residue biomass by Thermo-Catalytic Reforming and hydrodeoxygenation

Research is focused on the utilisation of waste or residue biomass for bioenergy conversion. A promising conversion technology for the production of liquid biofuels from residue biomass is a process called Thermo-Catalytic Reforming (TCR^®​) which is a combination of prior thermal treatment of the biomass at mild temperatures (intermediate pyrolysis) followed by a second catalytic treatment step at elevated temperatures (reforming). This article focuses on the conversion of TCR^® liquids from digestate as a feedstock for subsequent hydrocarbon production. The generated bio-oil showed a lower heating value of 34.0 MJ kg⁻¹ with an oxygen content of 7.0% and a water content of 2.2%. The bio-oil was hydrodeoxygenated using an industrial NiMo–Al₂O₃ catalyst at temperatures of 503 K–643 K and a pressure of 14 MPa. The hydrodeoxygenated bio-oil reached a lower heating value of 42.3 MJ kg⁻¹ with an oxygen content below 0.8 mg kg⁻¹ and water content of 30 ppm. Product yields and catalyst life give confidence that upgrading of the TCR^®​ bio-oil offers a suitable option to meet the high standards of common fuels.     

Assessing sustainable forest biomass potential and bioenergy implications for the northern Lake States region,USA

Forestlands in the United States have tremendous potential for providing feedstocks necessary to meet emerging renewable energy standards. The Lake States region is one area recognized for its high potential of supplying forest-derived biomass; however, the long-term availability of roundwood harvests and associated residues from this region has not been fully explored. Better distribution and temporal availability estimates are needed to formulate emerging state policies regarding renewable energy development. We used a novel predictive methodology to quantify sustainable biomass availability and likely harvest levels over a 100-year period in the Lake States region. USDA Forest Inventory and Analysis estimates of timberland were combined with published growth and yield models, and historic harvest data using the Forest Age Class Change Simulator (FACCS) to generate availability estimates. Monte-Carlo simulation was used to develop probability distributions of biomass harvests and to incorporate the uncertainty of future harvest levels. Our results indicate that 11.27–15.71 Mt y⁻¹ dry roundwood could be sustainably harvested from the Lake States. Assuming 65% collection rate, 1.87–2.62 Mt y⁻¹ residue could be removed, which if substituted for coal would generate 2.12–2.99 GW h of electricity on equivalent energy basis while reducing GHG (CO₂e) emission by 1.91–2.69 Mt annually. In addition to promoting energy security and reducing GHG emissions, forest residues for energy may create additional revenues and employment opportunities in a region historically dependent on forest-based industries.     

Production of ethanol from raw juice and thick juice of sugar beet by continuous ethanol fermentation with flocculating yeast strain KF-7

Sugar beet juice can serve as feedstock for ethanol product due to its high content of fermentable sugars and high energy output/input ratio. Batch ethanol fermentation of raw juice and thick juice proved that addition of mineral nutrients could not improve ethanol concentration, but could accelerate the fermentation rate. Fermentation of thick juice with an initial pH of 9.1 did not affect the fermentation process. The continuous ethanol fermentation of raw juice was performed at 35 °C with a dilution rate of 0.3 h⁻¹, resulting in ethanol concentration, ethanol yield and productivity of 70.7 g L⁻¹, 89.8% and 21.2 g L⁻¹ h⁻¹, respectively. A two-stage reactor was used in the continuous ethanol fermentation of thick juice by feeding fresh yeast cells into the second reactor. This process was stable at a total process dilution rate of 0.11 h⁻¹ with an overall sugar concentration of 190 g L⁻¹ in the influent. The ethanol concentration was kept at approximately 80 g L⁻¹, corresponding to ethanol yield of 82.5% and productivity of 8.8 g L⁻¹ h⁻¹.     

Supercritical water gasification of timothy grass as an energy crop in the presence of alkali carbonate and hydroxide catalysts

This study is focused on identifying the candidature of timothy grass as an energy crop for hydrogen-rich syngas production through supercritical water gasification. Timothy grass was gasified in supercritical water to investigate the impacts of temperature (450–650 °C), biomass-to-water ratio (1:4 and 1:8) and reaction time (15–45 min) in the pressure range of 23–25 MPa. The impacts of carbonate catalysts (e.g., Na₂CO₃ and K₂CO₃) and hydroxide catalysts (e.g., NaOH and KOH) at variable mass fractions (1–3%) were examined to maximize hydrogen yields. In the non-catalytic gasification of timothy grass, highest hydrogen (5.15 mol kg⁻¹) and total gas yields (17.2 mol kg⁻¹) with greater carbon gasification efficiency (33%) and lower heating value (2.21 MJ m⁻³) of the gas products were obtained at 650 °C with 1:8 biomass-to-water ratio for 45 min. However, KOH at 3% mass fraction maximized hydrogen and total gas yields up to 8.91 and 30.6 mol kg⁻¹, respectively. Nevertheless, NaOH demonstrated highest carbon gasification efficiency (61.3%) and enhanced lower heating value of the gas products (4.68 MJ m⁻³). Timothy grass biochars were characterized through Fourier transform infrared spectroscopy, Raman spectroscopy and scanning electron microscopy to understand the behavior of the feedstock to rising temperature and reaction time. The overall findings suggest that timothy grass is a promising feedstock for hydrogen production via supercritical water gasification.     

Climate change impacts of power generation from residual biomass

The European Union relies largely on bioenergy to achieve its climate and energy targets for 2020 and beyond.We assess, using Attributional Life Cycle Assessment (A-LCA), the climate change mitigation potential of three bioenergy power plants fuelled by residual biomass compared to a fossil system based on the European power generation mix. We study forest residues, cereal straws and cattle slurry.Our A-LCA methodology includes: i) supply chains and biogenic-CO₂ flows; ii) explicit treatment of time of emissions; iii) instantaneous and time-integrated climate metrics.Power generation from cereal straws and cattle slurry can provide significant global warming mitigation by 2100 compared to current European electricity mix in all of the conditions considered.The mitigation potential of forest residues depends on the decay rate considered. Power generation from forest logging residues is an effective mitigation solution compared to the current EU mix only in conditions of decay rates above 5.2% a⁻¹. Even with faster-decomposing feedstocks, bioenergy temporarily causes a STR(i) and STR(c) higher than the fossil system.The mitigation potential of bioenergy technologies is overestimated when biogenic-CO₂ flows are excluded. Results based solely on supply-chain emissions can only be interpreted as an estimation of the long-term (>100 years) mitigation potential of bioenergy systems interrupted at the end of the lifetime of the plant and whose carbon stock is allowed to accumulate back.Strategies for bioenergy deployment should take into account possible increases in global warming rate and possible temporary increases in temperature anomaly as well as of cumulative radiative forcing.     

Enhancement of lipid productivity in green microalgae Chlorella sp. via fast neutron irradiation

Microalgae is becoming a promising candidate for biofuel production and energetic lipid production, which urges the need to develop efficient methods for improvement of the lipid production. In this study, the neutron irradiation was employed to improve lipid production under different dosage irradiation. Effects of different dosages (No.1:8.14 × 10⁹, No.2:5.64 × 10⁸, No.4:9.42 × 10⁷ n/cm²) were compared by investigating associated algae cell growth, total lipid production, metabolization and enzyme activity. Dosages No.2 and No.4 improved the lipid content without negative influence on the growing, whereas irradiations shortened the period of biomass accumulation. The neutron irradiation in No.2 accelerated the synthesis of lipid from the carbohydrate transition process. In addition, the neutron irradiation not only increased the total lipid production by 20% but also speeded up the reaction rate to reach the maximal total lipid production in 28 days. Our results can provide a better understanding of the lipid production in microalgae Chlorella sp. by neutron irradiation, which are critical for evaluation of neutron irradiation based technologies for the sustainable and renewable biofuel production.     

Steam explosion pretreatment and enzymatic saccharification of duckweed (Lemna minor) biomass

Our previous research has shown that duckweed is potentially an ideal feedstock for the production of biofuels because it can be effectively saccharified enzymatically. Here we report the results of experiments in which duckweed was pre-treated by steam explosion prior to enzyme digestion. A range of temperatures, from 130 to 230 °C with a fixed retention time of 10 min, were employed. The best pretreatment conditions were 210 °C for 10 min; these conditions produced the highest amount of water-soluble material (70%), the greatest levels of starch solubilisation (21%) and hemicellulose and pectic polysaccharides degradation (60%). The use of these steam explosion conditions enabled large reductions in the concentrations of enzymes required for effective saccharification. The amount of Celluclast required was reduced from 100 U (4.35 FPU) g⁻¹ substrate to 20 U g⁻¹ substrate, and additional beta-glucosidase was reduced from 100 to 2 U g⁻¹ substrate.     

Hydrogen,ethanol and cellulase production from pulp and paper primary sludge by fermentation with Clostridium thermocellum

Pulp and paper industry primary sludge being largely composed of lignocellulosic fibres, it could be used as carbon source by bacteria having cellulolytic capability. The aim of this study was to evaluate the use of cellulose contained in this type of sludge for Clostridium thermocellum to produce ethanol, hydrogen and cellulases. In an ATCC 1191 medium containing 5 kg m⁻³ dry primary sludge from recycled paper mill, batch culture reached stationary phase after 2 days. All of the available cellulose was hydrolysed after 60 h of incubation, with a final pH of 5.83. Metabolites produced after 60 h of fermentation were acetate (8.50 mol m⁻³), ethanol (11.30 mol m⁻³), lactate (8.75 mol m⁻³), formate (0.27 mol m⁻³), hydrogen (11.20 mol m⁻³) and carbon dioxide (18.41 mol m⁻³). Cellulase activity was detected in the supernatant after 36 h, with a maximal activity of 0.25 U cm⁻³ at 72 h. Pulp and paper primary sludge appeared to be a readily usable substrate for C. thermocellum at this concentration, yielding both potential biofuels (hydrogen and ethanol) as well as active cellulases.     

Can slurry biogas systems be cost effective without subsidy in Mexico?

Biogas from pig slurry in Mexico has potential to produce 21 PJ per year, equivalent to 3.5% of natural gas consumption in 2013. In this paper, three different scenarios are analysed: mono-digestion of pig slurry in a finisher farm (scenario 1); co-digestion of pig slurry and elephant grass in a finisher farm in situ (scenario 2) and co-digestion of pig slurry and elephant grass in centralised biogas plants (scenario 3). The digesters proposed are anaerobic high density polyurethane (HDPE) covered lagoons. HDPE centralised plants can have capital costs 5 times cheaper than European biogas plants. The economics of utilisation of biogas for electricity generation and as biomethane (a natural gas substitute) were investigated. Economic evaluations for on-site slurry digestion (Scenario 1) and on-site co-digestion of elephant grass and pig slurry (Scenario 2) showed potential for profitability with tariffs less than $US 0.12/kWh_e. For centralised systems (Scenario 3) tariffs of $US 0.161/kWh_e to $US 0.195/kWh_e are required. Slurry transportation, energy use and harvest and ensiling account for 65% of the operational costs in centralised plants (Scenario 3). Biomethane production could compete with natural gas if a subsidy of 4.5 c/L diesel (1 m³ of biomethane) equivalent was available.     

Energy recovery from grass of urban roadside verges by anaerobic digestion and combustion after pre-processing

Grass from urban roadside verges is a potential, though widely unused, resource for bioenergy recovery. Two possible bioenergy recovery techniques were tested, i.e. i) direct anaerobic digestion of the whole parent material and ii) the “integrated generation of solid fuel and biogas from biomass” (IFBB) procedure, which divides biomass into a press fluid and a press cake by mashing and mechanical dewatering. Biomass yield, chemical composition and canopy height of biomass, contribution of functional groups, fermentation characteristics of silage and press fluids, as well as characteristics of the produced solid fuel was investigated, applying a 4-cut management for anaerobic digestion, a 2-cut management for IFBB and an 8 times mulching as a reference. Mean annual biomass yield (2013 and 2014) was 3.24, 3.33 and 5.68 t dry matter ha⁻¹ for the mulching, 4-cut management and 2-cut management, respectively. Yields were higher in 2014 due to more favourable weather conditions. Fibre concentration was higher in material of the 2-cut management than in the 4-cut management, however, methane yield of the corresponding silages was the same. Highest methane yield was gained from press fluids with 292 l_N kg⁻¹ volatile solids. The press cake had a lower heating value of 16 MJ kg⁻¹ dry matter and a K₂O/CaO index of 0.51–0.88. Gross energy output was 26.4 GJ ha⁻¹ for anaerobic digestion and 84.4 GJ ha⁻¹ for IFBB. Thus, an altered roadside verge management with reduced cutting frequency might allow a significant energy recovery and improved ecosystem services, i.e. increased biodiversity.     

Cob biomass supply for combined heat and power and biofuel in the north central USA

Corn (Zea mays L.) cobs are being evaluated as a potential bioenergy feedstock for combined heat and power generation (CHP) and conversion into a biofuel. The objective of this study was to determine corn cob availability in north central United States (Minnesota, North Dakota, and South Dakota) using existing corn grain ethanol plants as a proxy for possible future co-located cellulosic ethanol plants. Cob production estimates averaged 6.04 Tg and 8.87 Tg using a 40 km radius area and 80 km radius area, respectively, from existing corn grain ethanol plants. The use of CHP from cobs reduces overall GHG emissions by 60%–65% from existing dry mill ethanol plants. An integrated biorefinery further reduces corn grain ethanol GHG emissions with estimated ranges from 13.9 g CO₂ equiv MJ⁻¹ to 17.4 g CO₂ equiv MJ⁻¹. Significant radius area overlap (53% overlap for 40 km radius and 86% overlap for 80 km radius) exists for cob availability between current corn grain ethanol plants in this region suggesting possible cob supply constraints for a mature biofuel industry. A multi-feedstock approach will likely be required to meet multiple end user renewable energy requirements for the north central United States. Economic and feedstock logistics models need to account for possible supply constraints under a mature biofuel industry.     

Growth of microalgae using CO2 enriched air for biodiesel production in supercritical CO2

The optimum conditions for lipids productivity and CO₂ fixation of two freshwater strains, namely Chlorella sp. and Pseudochlorococcum sp. and a marine strain; namely Nannochlorpsis sp. have been determined in this work. The species were grown autotrophically under aeration with different CO₂ concentrations, ranging from 0.04 to 2% (v/v). The growth was tested in nitrogen sufficient and deficient media at different salinities (0.49–680 mM) and temperatures of 27 and 31 °C. The optimum CO₂ enrichment was found to be 1% (v/v) in both media. Nitrogen starvation resulted in an increase in lipid contents, but at lower growth rate, which resulted in a lower overall lipid productivity. The experimental data were used to determine the kinetic parameters of Haldane model. The Chlorella sp. grew well at salinity levels of up to 460 mM. The highest CO₂ biofixation rate was observed when Chlorella sp. was grown at 27 °C in seawater (230 mM NaCl).Lipids were extracted from harvested marine strain, Nannochlorpsis sp., and enzymatically transesterified to produce biodiesel in supercritical CO₂ (SC–CO₂) medium. It was found that the conversion of biodiesel produced from microalgae lipids was 35% higher than that achieved using lamb fat in a similar system.     

Characterization,pretreatment and saccharification of spent seaweed biomass for bioethanol production using baker's yeast

Seaweeds are marine macroalgae found abundantly and viewed as potential source of phycocolloids to produce biofuel. In this study, seaweed spent biomass obtained from alginate production industry and biomass obtained after pigment extraction were found to contain a considerable amount of phycocolloids. These two spent biomasses were investigated for the production of ethanol. In this study, the red seaweed spent biomass of Gracilaria corticata var corticata showed higher content of polysaccharide (190.71 ± 30.67 mg g⁻¹ dry weight) than brown seaweed spent biomass (industrial) (136.28 ± 30.09 mg g⁻¹ dry weight). Hydrolysis of spent biomasses with different concentrations of sulfuric acid (0.1%, 0.5% and 1%) was also investigated. Brown seaweed spent biomass and red seaweed spent biomass exhibited high amount of sugar in 0.5% and 1% sulfuric acid treatment, respectively. Proximate and ultimate composition of seaweed spent biomasses were analysed for energy value. The FT-Raman spectra exhibited similar stretches for both acid hydrolysed spent biomasses with their respective standards. Ethanol produced through a fermentation process using spent hydrolysates with baker's yeast at pH 5.3 was found to be significant. The ethanol yield from brown seaweed spent biomass and red seaweed spent biomass was observed to be 0.011 g g⁻¹ and 0.02 ± 0.003 g g⁻¹ respectively, when compared with YPD (0.42 ± 0.03 g g⁻¹) and d-galactose (0.37 ± 0.04 g g⁻¹) as standard on day 4. The present study revealed the possibility of effective utilization of spent biomass from seaweed industry for ethanol production.     

Mild alkaline pre-treatments loosen fibre structure enhancing methane production from biomass crops and residues

Three ligno-cellulosic substrates representing varying levels of biodegradability (giant reed, GR; fibre sorghum, FS; barley straw, BS) were combined with mild alkaline pre-treatments (NaOH 0.05, 0.10 and 0.15 N at 25 °C for 24 h) plus untreated controls, to study pre-treatment effects on physical-chemical structure, anaerobic digestibility and methane output of the three substrates. In a batch anaerobic digestion (AD) assay (58 days; 35 °C; 4 g VS l⁻¹), the most recalcitrant substrate (GR) staged the highest increase in cumulative methane yield: +30% with NaOH 0.15 N over 190 ml CH₄ g⁻¹ VS in untreated GR. Conversely, the least recalcitrant substrate (FS) exhibited the lowest gain (+10% over 248 ml CH₄ g⁻¹ VS), while an intermediate behaviour was shown by BS (+15% over 232 ml CH₄ g⁻¹ VS). Pre-treatments speeded AD kinetics and reduced technical digestion time (i.e., the time needed to achieve 80% methane potential), which are the premises for increased production capacity of full scale AD plants. Fibre components (cellulose, hemicellulose and acid insoluble lignin determined after acid hydrolysis) and substrate structure (Fourier transform infra-red spectroscopy and scanning electron microscopy) outlined reductions of the three fibre components after pre-treatments, supporting claims of loosened binding of lignin with cellulose and hemicellulose. Hence, mild alkaline pre-treatments were shown to improve the biodegradability of ligno-cellulosic substrates to an extent proportional to their recalcitrance. In turn, this contributes to mitigate the food vs. fuel controversy raised by the use of whole plant cereals (namely, maize) as feedstocks for biogas production.     

Anaerobic digestion of maize and cellulose under thermophilic and mesophilic conditions – A comparative study

The aim of this study was to advance in understanding of digestion process of energy crops. Cellulose and maize silage were fermented in batch mode at mesophilic (38 °C) and thermophilic (55 °C) conditions and corresponding organic loads of 5.5 ± 0.2 kgVS/m³, 11.2 ± 0.3 kgVS/m³ and 16.7 ± 0.4 kgVS/m³.For both substrates more stable and faster digestion took place at 38 °C. Due to complex structure maize degradation was characterized by varying digestion rate and longer total digestion time resulting form breakdown of hard-degradable fractions. The digestion retard at increased OLRs of cellulose and lower degradation level obtained for all cellulose series confirm a higher overloading potential for systems dealing with single-component-substrates but also the enhanced sensitivity of such systems to any inconvenient digestion conditions.Based on observed patterns of volatile fatty acids and oxidation-reduction potential, different fermentation mechanisms can be concluded for cellulose and maize, but also for different temperature modes. Conversion of maize at highly reductive conditions with increased concentrations of butyric acid was accompanied by much higher activity of hydrogenotrophic methanogens than for cellulose digestion.Two factors showed a strong potential to influence test results: an insufficient VS content of inoculum, which caused reduced biogas yields, and a high natural biodiversity of maize silage, resulting in higher biogas yields than calculated based on the maize composition.     

The improved CO2 capture system with heat recovery based on absorption heat transformer and flash evaporator

Absorption heat transformer (AHT) and flash evaporator (FE) are used to reduce the heat consumption of CO₂ capture processes and an AHT–FE-aided capture system is proposed. Analyses are carried out to verify the effectiveness in reducing heat consumption. Compared with the base CO₂ capture system of 3000 t/d CO₂ capture capacity from a 660 MW coal-fired power unit, the AHT–FE-aided capture system reduces the heat consumption from 3.873 GJ/tCO₂ to 3.772 GJ/tCO₂, and the corresponding energy saving is 2.62%. The economic analysis shows that the annual profit would be 2.94 million RMB Yuan. The payback period of the AHT–FE-aided capture system is approximately 2.4 years. Therefore, the AHT–FE-aided capture system is both economically and technically feasible for improving the CO₂ capture energy performance.     

Sunflower as a biofuels crop: An analysis of lignocellulosic chemical properties

Four accessions of cultivated sunflower (Helianthus annuus) and silverleaf sunflower (Helianthus argophyllus), were each grown in three locations (Georgia, British Columbia, and Iowa) at different planting densities and phenotyped for biomass-related traits and wood biochemistry. In most environments, H. argophyllus produced significantly more biomass than H. annuus. Cell wall chemistry for a subset of plants grown in Georgia and Iowa was assessed using analytical wet chemistry methods to measure lignin and sugar content/composition. The analysis of lignin and the S/G-lignin ratios for a larger number of samples (n > 250) was also assessed by high-throughput pyrolysis Molecular Beam Mass Spectrometry. Average pyMBMS estimated lignin content (i.e., dry weight fraction) for 60 °C dried basal stem samples of H. annuus and H. argophyllus was 29.6% (range, 24.0%–34.6%) and 28.6% (range, 24.6%–33.3%), respectively when averaged across all environments. The average S/G lignin mass ratio was 1.5 (range, 1.0–2.0) for H. annuus and 1.7 (range, 1.0–2.4) in H. argophyllus. Stem samples from these two species only differed statistically for a few cell wall chemistry traits; however, accession level differences within each species were apparent. Cell wall chemistry in both species was significantly affected by both location and planting density, thus demonstrating the need to select for these traits in the environment for which the crop will be produced. Overall, these results show that cultivated sunflower and silverleaf sunflower both possess the necessary phenotypic diversity to facilitate the development of a hybrid sunflower with improved lignocellulosic biofuels traits, namely increased biomass, decreased lignin, and increased glucan.