Synthesis and characterization of AB block copolymers based on polyhedral oligomeric silsesquioxane

Well-defined diblock copolymer based on polyhedral oligomeric silsesquioxane (POSS) was synthesized by atom transfer radical polymerization (ATRP) using POSS/PMMA-Cl as a macroinitiatior. POSS/PMMA-Cl was prepared by POSS-Cl initiating the polymerization of MMA in the presence of CuCl, 2, 2, - bipyridine at 110 °C. The structure of the block copolymer had been characterized by FTIR, ¹H NMR and GPC, which all agreed well with the theoretical values. XRD measurements revealed that POSS molecules were successfully monodispered in the hybrid composite.     

Preparation of a novel composite material by emulsion polymerization of vinyl acetate and vinyl polyhedral oligomeric silsesquioxane

A novel material containing polyhedral oligomeric silsesquioxane (POSS) was prepared by semi-continuous emulsion polymerization. Incompletely condensed, phenyl POSS (Na₃O₁₂Si₇(C₆H₅)₇) with the highly reactive group of trisodium silanolate was used to prepare 1, 3, 5, 7, 9, 11, 13-heptaphenyl-15-vinyl silsesquioxane (vinyl-POSS) by “corner-capping” method. Then this cubic structure molecule was chemically bonded with PVAc chain to synthesize POSS/PVAc composite. The structures of POSS and composite were characterized by FTIR, ¹H-NMR and XRD. The results confirmed that vinyl-POSS could be successfully incorporated into the PVAc matrix via emulsion polymerization. Transmission electron microscope (TEM) was used to observe the morphology of copolymers. The thermal properties were investigated by differential scanning calorimetry and thermal gravimetric analysis. Data indicated that the POSS/PVAc composite displayed higher thermal stability than that of the parent PVAc homopolymer.     

乳液法制备OVPOSS/PS复合微球及其热性能的研究

采用普通乳液聚合法制备了八乙烯基倍半硅氧烷(OVPOSS)交联的聚苯乙烯(PS)纳米复合微球,分析该纳米复合微球的化学结构、晶体结构及热性能。结果表明:通过自由基乳液聚合法可实现苯乙烯与OVPOSS的共聚,复合微球的粒径约为80nm,且尺寸分布较均匀;引入POSS可以显著提高复合粒子的耐热性和玻璃化转变温度。     

Preparation and thermal property of hybrid nanocomposites by free radical copolymerization of styrene with octavinyl polyhedral oligomeric silsesquioxane

The poly(styrene‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PS–POSS) organic–inorganic hybrid nanocomposites containing various percent of POSS were prepared via one‐step free radical polymerization and characterized by FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA technologies. The POSS contents in these nanocomposites were determined using FTIR calibration curve. The result shows that the POSS contents in nanocomposites can be tailored by varying the POSS feed ratios. On the basis of the POSS contents in the nanocomposites and the ¹H NMR spectra, the number of reacted vinyl groups of each octavinyl‐POSS macromonomer were calculated to be 6–8. DSC and TGA measurements indicate that the incorporation of POSS into PS homopolymer can apparently improve the thermal properties of the polymeric materials. The dramatic T_g and T_dec increases are mainly due to the formation of star and low cross‐linking structure of the nanocomposites, where POSS cores behave as the joint points and hinder the motion and degradation of the polymeric chains. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

POSS/PS复合材料的制备及其热性能研究

以1,3,5,7,9,11,13-苯基-15-氯丙基笼型倍半硅氧烷(POSS-Cl)与二乙醇胺进行反应,将末端氯基团转化为两个端羟基,通过羟基与2-溴代异丁酰溴的酯化反应得到POSS-(Br)2引发剂,并运用原子转移自由基聚合(ATRP)成功合成了一种新型POSS/PS复合材料。采用傅里叶红外(FTIR)、核磁共振(NMR)等手段对POSS和POSS/PS的结构进行了表征。通过差示扫描量热(DSC)和热失重(TGA)分析对POSS/PS复合材料的热性能进行了研究。结果表明:POSS单元的引入能显著提高聚合物的热稳定性。     

The synthesis and characterization of polystyrene/magnetic polyhedral oligomeric silsesquioxane (POSS) nanocomposites

Fc-CHCH-C₆H₆-(C₅H₉)₇Si₈O₁₂ (POSS1, Fc: ferrocene) which contain both metal and CC double bond was firstly synthesized by Wittig reaction. The chemical structure of POSS1 was characterized by FTIR, ¹H, ¹³C and ²⁹Si NMR, mass spectrometry and elemental analysis, and the magnetic property of POSS1 have also been studied. Polystyrene composites containing inorganic-organic hybrid polyhedral oligomeric silsesquioxane (POSS1) were prepared by bulk free radical polymerization. XRD and TEM studies indicate that POSS1 is completely dispersed at molecular level in PS matrix when 1 wt% POSS1 is introduced, while some POSS1-rich nanoparticals are present when content of POSS1 is beyond 3 wt%. GPC results show that molecular weight of the PS/POSS1 nanocomposites are increased with addition of POSS1. TGA and TMA data show the thermal stabilities of PS/POSS1 nanocomposites have been improved compared to neat PS. The PS/POSS1 nanocomposites also display higher glass transition temperatures (T_g) in comparison with neat PS. Viscoelastic properties of PS/POSS1 nanocomposites were investigated by DMTA. The results show the storage modulus (E′) values (temperature>T_g) and the loss factor peak values of the PS/POSS1 nanocomposites are higher than that of neat PS. Mechanical properties of the PS/POSS1 nanocomposites are improved compared to the neat PS.     

Synthesis,structure, and properties of high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane nanocomposites

The organic–inorganic hybrid nanocomposites from high‐impact polystyrene/octavinyl polyhedral oligomeric silsesquioxane (HIPS/POSS) containing various percentages of POSS were prepared by free radical polymerization and characterized by Fourier transform infrared spectroscopy (FTIR), ¹H‐NMR, thermal gravity analysis (TGA), X‐ray diffraction (XRD), and transmission electron microscopy (TEM). The octavinyl POSS has formed covalent bond connected PS‐POSS hybrid with polystyrene. POSS can well disperse in the composites at the composition of 0.5 and 1 wt%. The mechanical properties and thermostability of HIPS/POSS nanocomposites were significantly improved. The tensile strength, the izod impact strength, and the elongation at break of the nanocomposite containing 1 wt% of POSS was increased, respectively, by 15.73%, 75.62%, and 72.71% in comparison with pristine HIPS. The thermal decomposition temperature of HIPS/POSS (1 wt% of POSS) was 33°C higher than that of pristine HIPS. The HIPS/POSS nanocomposites showed great potential for applications in many fields, such as electric appliance and automotive trim. POLYM. COMPOS. 37:1049–1055, 2016. © 2014 Society of Plastics Engineers     

A novel strategy to synthesize POSS/PS composite and study on its thermal properties

A novel strategy was reported in this paper to prepare polyhedral oligomeric silsesquioxanes (POSS)/polystyrene (PS) composite. Active agent was introduced to the PS chain through the treatment of acylation, reduction and reaction with sodium, and then the monofunctional POSS, which was prepared by “corner-capping” method, was chemically bonded with the modified PS chain to synthesize POSS/PS composite. The structures of all intermediates and the POSS/PS composite were characterized by FT-IR and ¹H-NMR. The thermal properties were investigated by differential scanning calorimetry and thermal gravimetric analysis, with results showing that the POSS/PS composite displayed higher glass transition temperature and initial decomposition temperature than that of the parent PS homopolymer.     

Thermal study on phenyl,hepta isobutyl‐polyhedral oligomeric silsesquioxane/polystyrene nanocomposites

A comparative study concerning the thermal stability of polystyrene (PS) and three polyhedral oligomeric silsesquioxane/polystyrene (POSS/PS) nanocomposites of formula R₇R′(SiO_1.5)₈/PS (where R = isobutyl and R′ = phenyl), at various (3, 5, and 10%) POSS concentration was carried out in both inert (flowing nitrogen) and oxidative (static air) atmospheres. Nanocomposites were synthesized by in situ polymerization of styrene in the presence of POSS and the experimental filler concentration in the obtained compounds, determined by ¹H NMR spectroscopy, was in all cases slightly higher than that in the reactant mixtures. Inherent viscosity (η_inh) determinations indicated that the average molar mass of polymer in the nanocomposites was practically the same than neat PS and were in agreement with calorimetric glass transition temperature (T_g) measurements. The temperature at 5% mass loss (T_5%) and the activation energy (E_a) of degradation process of synthesized nanocomposites were determined and compared with each other and with those of unfilled PS. On the basis of the results from thermal and IR spectroscopy characterizations, nanocomposite with 5% of molecular filler appears the most thermally stable. The results were also compared with literature data on similar PS‐based nanocomposites. POLYM. COMPOS., 2013 © 2013 Society of Plastics Engineers     

Poly(ɛ‐caprolactone)/polyhedral oligomeric silsesquioxane hybrids: Crystallization behavior and thermal degradation

Biodegradable organic–inorganic hybrids based on poly(?‐caprolactone) (PCL) and polyhedral oligomeric silsesquioxane (POSS) with 5.3–21.3 wt % POSS were synthesized via ring‐opening polymerization (ROP). Chemical structures of the polymers were characterized by proton nuclear magnetic resonance (¹H NMR), fourier transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). X‐ray diffraction (XRD) analysis illustrated that both POSS and PCL segment in POSS/PCL hybrids could crystallize and form two well‐separated crystalline phases except in the one with low content of POSS (5.3 wt %). Melting behavior and non‐isothermal crystallization kinetics of POSS/PCL hybrids were studied by differential scanning calorimeter (DSC). The results indicated that the POSS segment suppressed crystallization of the PCL segment to some extent. Polarizing optical microscope (POM) images showed that POSS/PCL hybrids with the highest POSS loading (21.3 wt %) possessed “snowflake” shape crystals whereas the ones with relatively low POSS loading exhibited classic spherulites. Thermogravimetry (TG) measurement revealed that thermal degradation of POSS/PCL hybrids proceeded by four‐step while PCL homopolymers degraded by a single step. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44113.     

Synthesis and thermal characterization of new dumbbell shaped POSS/PS nanocomposites: Influence of the symmetrical structure of the nanoparticles on the dispersion/aggregation in the polymer matrix

A series of three novel dumbbell shaped polyhedral oligomeric silsesquioxanes (POSS)/ polystyrene (PS) nanocomposites, at different POSS contents (3%, 5% and 10% w/w), was synthesized and characterized in order to investigate the effects of this new bridged structure on the filler‐polymer interaction and then on the thermal behavior of the obtained polymer nanostructured materials (PNMs). Nanocomposites were synthesized by in situ polymerization of styrene and the actual POSS concentration in the obtained PNMs was checked by ¹H NMR spectroscopy. Scanning electron microscopy (SEM) and FTIR spectroscopy evidenced, at the same time, the presence of filler‐polymer interactions and auto‐aggregation phenomena. Degradations were carried out into a thermobalance, in the scanning mode, at various heating rates in both inert and oxidative atmospheres. The characteristic parameters of thermal stability, namely temperature at 5% mass loss and the apparent activation energy of degradation, for the various nanocomposites were determined and an increase in the initial decomposition temperatures of PNMs with increasing the POSS contents was observed. The results are discussed and interpreted. POLYM. COMPOS., 36:1394–1400, 2015. © 2014 Society of Plastics Engineers     

Enhanced thermal properties of PS nanocomposites formed from inorganic POSS-treated montmorillonite

We have prepared polystyrene/clay nanocomposites using an emulsion polymerization technique. The nanocomposites were exfoliated at up to a 3 wt% content of pristine clay relative to the amount of polystyrene (PS). We used two different surfactants for the montmorillonite: the aminopropylisobutyl polyhedral oligomeric silsesquioxane (POSS) and the ammonium salt of cetylpyridinium chloride (CPC). Both surfactants can intercalate into the layers of the pristine clay dispersed in water prior to polymerization. Although the d spacing of the POSS-intercalated clay is relatively smaller than that of the CPC-intercalated clay, PS more easily intercalates and exfoliates the POSS-treated clay than the CPC-treated clay. IR spectroscopic analysis further confirms the intercalation of POSS within the clay layers. We used X-ray diffraction (XRD) and transmission electron microscopy (TEM) to characterize the structures of the nanocomposites. The nanocomposite prepared from the clay treated with the POSS containing surfactant is exfoliated, while an intercalated clay was obtained from the CPC-treated surfactant. The molecular weights of polystyrene (PS) obtained from the nanocomposite is slightly lower than the virgin PS formed under similar polymerization conditions. The value of T_g of the PS component in the nanocomposite is 8 °C higher than the virgin PS and its thermal decomposition temperature (21 °C) is also higher significantly. The presence of the POSS unit in the MMT enhances the thermal stability of the polystyrene.     

Study on thermal enhancement mechanism of POSS‐containing hybrid nanocomposites and relationship between thermal properties and their molecular structure

In this study, a series of poly(4‐acetoxystyrene) (PAS)‐octavinyl polyhedral oligomeric silsesquioxane (POSS) blends and the polystyrene (PS)‐octavinyl POSS blends were prepared by the solution‐blending method and characterized with Fourier transform infrared (FTIR), X‐ray diffraction (XRD), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) techniques. The results show that the glass‐transition temperature (T_g) of the PAS‐POSS blends increases at a relatively low POSS content and then decreases at a relatively high POSS content. POSS can effectively improve the thermal stability of the PAS‐POSS blends at low POSS content, and T_g of PAS‐POSS blends decreases with the increase in POSS content at relatively high POSS content. However, the T_g of the PS‐POSS blends persistently decreases even at very low POSS content. T_g change mechanism was investigated in detail by XRD, TEM, and FTIR spectra. The influence mechanism of POSS content and dispersion in composites, and parent polymer structure on thermal properties of the blends was investigated in detail. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Poly(vinyl pyrrolidone‐co‐octavinyl polyhedral oligomeric silsesquioxane) hybrid nanocomposites: Preparation,thermal properties,and Tg improvement mechanism

A series of poly(vinyl pyrrolidone‐co‐octavinyl polyhedral oligomeric silsesquioxanes) (PVP‐POSS) organic–inorganic hybrid nanocomposites containing different percentages of POSS were prepared via free radical polymerization and characterized by FTIR, high‐resolution ¹H‐NMR, solid‐state ²⁹Si‐NMR, GPC, DSC, and TGA. POSS contents in these nanocomposites can be effectively controlled by varying the POSS feed ratios which can be accurately quantified by FTIR curve calibration. On the basis of ²⁹Si‐NMR spectra, average numbers of reacted vinyl groups of each octavinyl‐POSS macromer are calculated to be 5–7, which depends on POSS feed ratios. Both GPC and DSC results indicate that these nanocomposites display network structure and the degree of crosslinking increases with the increase of the POSS content. The incorporation of POSS into PVP significantly improves their thermal properties (T_g and T_dec) primarily due to crosslinking structure and dipole–dipole interaction between POSS cores and PVP carbonyl groups. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(HEMA‐co‐MMA)‐g‐POSS nanocomposites by combination of reversible addition fragmentation chain transfer polymerization and click chemistry

New hybrid poly(hydroxyethyl methacrylate‐co‐methyl methacrylate)‐g‐polyhedral oligosilsesquioxane [poly(HEMA‐co‐MMA)‐g‐POSS] nanocomposites were synthesized by the combination of reversible addition fragmentation chain transfer (RAFT) polymerization and click chemistry using a grafting to protocol. Initially, the random copolymer poly(HEMA‐co‐MMA) was prepared by RAFT polymerization of HEMA and MMA. Alkynyl side groups were introduced onto the polymeric backbones by esterification reaction between 4‐pentynoic acid and the hydroxyl groups on poly(HEMA‐co‐MMA). Azide‐substituted POSS (POSS? N₃) was prepared by the reaction of chloropropyl‐heptaisobutyl‐substituted POSS with NaN₃. The click reaction of poly(HEMA‐co‐MMA)‐alkyne and POSS? N₃ using CuBr/PMDEATA as a catalyst afforded poly(HEMA‐co‐MMA)‐g‐POSS. The structure of the organic/inorganic hybrid material was investigated by Fourier transformed infrared, ¹H‐NMR, and ²⁹Si‐NMR. The elemental mapping analysis of the hybrid using X‐ray photoelectron spectroscopy and EDX also suggest the formation of poly(HEMA‐co‐MMA)‐anchored POSS nanocomposites. The XRD spectrum of the nanocomposites gives evidence that the incorporation of POSS moiety leads to a hybrid physical structure. The morphological feature of the hybrid nanocomposites as captured by field emission scanning electron microscopy and transmission electron microscopic analyses indicate that a thick layer of polymer brushes was immobilized on the POSS cubic nanostructures. The gel permeation chromatography analysis of poly(HEMA‐co‐MMA) and poly(HEMA‐co‐MMA)‐g‐POSS further suggests the preparation of nanocomposites by the combination of RAFT and click chemistry. The thermogravimetric analysis revealed that the thermal property of the poly(HEMA‐co‐MMA) copolymer was significantly improved by the inclusion of POSS in the copolymer matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly [2-(cinnamoyloxy)ethyl methacrylate-co-octamethacryl-POSS] nanocomposites: Synthesis and properties

Poly [2-(cinnamoyloxy)ethyl methacrylate-co-octamethacryl-POSS] nanocomposites were synthesized from octamethacryl-POSS and 2-(cinnamoyloxy)ethyl methacrylate (CEM) by free radical polymerization. The chemical structures and morphologies of these nanocomposites were determined by FTIR, ²⁹Si NMR, energy-dispersive spectroscopy (EDS), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) techniques. The XRD data showed that the materials were amorphous in nature, indicating that POSS formed an aggregate instead of a crystalline form in the polymer matrix. The POSS-CEM nanocomposites exhibited high thermal stability. Excitation and emission of the CEM-incorporated POSS nanocomposites, studied in the solid state, exhibited blue emission with CIE (x, 0.178; y, 0.137) coordinates, in addition to an emission intensity that increased with increasing CEM (monomer) concentration.     

Effects of mesoporous SBA-15 contents on the properties of polystyrene composites via in-situ emulsion polymerization

Different loading of mesoporous molecular sieve SBA-15 was used to prepare polystyrene (PS)/SBA-15 composite materials via in-situ emulsion polymerization. The influence of SBA-15 silica on the styrene emulsion polymerization was studied regarding to the monomer conversion, particle size and particle size distribution, stability and viscosity of the resulting emulsion. The structure and properties of the composites were investigated by infrared spectroscopy (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and gel permeation chromatography (GPC). In addition, the glass transition temperature (T_g), thermal mechanical property and thermal stability of the composite film were measured by differential scanning calorimeter (DSC), dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), respectively. The results indicated that the composite emulsion showed high monomer conversion, thick viscosity, low coagulum, uniform particle size and broad size distribution. Molecular weight of the polymer decreased with the increase of mesoporous silica. SBA-15 silica was dispersed evenly in PS matrix at a loading of 5 %. The PS/SBA-15 composite material containing 10 % silica maintained a certain ordered structure. DMA results demonstrated that PS/SBA-15 composite exhibited greater storage modulus and high T_g compared to pure PS. The improved thermal stability and T_g of the composite were also confirmed by the TGA and DSC.     

Novel phenyl‐POSS/polyurethane aqueous dispersions and their hybrid coatings

A facile and rapid preparation of 3‐(2‐aminoethylamino)propylheptaphenylPOSS (AA‐POSS), a special phenyl‐POSS that contains two functional amino groups (Scheme 1), is demonstrated by the corner‐capping method. Then AA‐POSS forms a series of novel phenyl‐POSS/PU aqueous dispersions. The structure of AA‐POSS has been confirmed by ¹H, ¹³C, ²⁹Si NMR, and ESI‐MS. The POSS/PU hybrid films are studied by Fourier transform infrared spectrometer (FT‐IR), gel permeation chromatography (GPC), scanning electron microscope (SEM), X‐ray diffraction (XRD) spectra, differential scanning calorimetry (DSC) analysis, and thermal gravimetric analyzer (TGA). FT‐IR and GPC are conducted to validate the chemical structure of the hybrid PU. The properties of hybrid films display significant changes with notable increases in T_g, thermal properties, tensile strength, as well as surface hydrophobicity. These changes are attributed to the incorporation of novel POSS into PU. Moreover, these significant material property enhancements are achieved at low levels of POSS incorporation (only 4%). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1611–1620, 2013     

Synthesis of organic-inorganic star-shaped polyoxazolines using octafunctional silsesquioxane as an initiator

Summary Hybrid star-shaped polyoxazolines having POSS core were prepared by ring-opening polymerization of 2-methyl-2-oxazoline using various octafunctional POSS as an initiator with changing the feed ratio of POSS to 2-methyl-2-oxazoline. The core-first method, which uses an active multifunctional core to initiate growth of polymer chains, was applicable to make hybrid POSS-core star-shaped polyoxazolines. The kinetic rate of the polymerization and the structures of hybrid star-shaped polyoxazolines were characterized by gas chromatography (GC) and ¹H NMR, respectively. Their thermal properties were investigated in detail by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Received: 6 November 2002 / Accepted: 20 November 2002 Correspondence to Yoshiki Chujo     

POSS Core star‐shape molecular hybrid materials: Effect of the chain length and POSS content on dielectric properties

A series of inorganic–organic molecular hybrids, poly(styrene‐co‐octavinyl‐polyhedral oligomeric silsesquioxane)s (PS‐POSSs), were synthesized, and their structures and properties were characterized by FTIR, ¹H‐NMR, ²⁹Si‐NMR, XRD, optical microscopy (OM), and atomic force microscopy (AFM). The chemical incorporation of POSS into polymer matrixes achieves uniform dispersion and makes the resultant hybrids display good film formability. The relationship between molecular structure of these hybrids and their dielectric constants and formation mechanism of low dielectric constant were investigated. The low dielectric constant of the hybrids mainly originates from the increase of free volume, involving the free volume of intrinsic porosity from POSS and an increase in the free volume owing to steric hindrance of bulky POSS. The latter plays a dominant role to increase the free volume and formation of low dielectric constant. Simultaneously, the polymer arm‐length has an important influence on the dielectric constant of the star‐type hybrids. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013