The effect of geometric factor of carbon nanofillers on the electrical conductivity and electromagnetic interference shielding properties of poly(trimethylene terephthalate) composites: a comparative study

In this study, the effects of filler geometry on the electrical conductivity and electromagnetic interference (EMI) shielding properties of poly(trimethylene terephthalate) (PTT) composites filled with graphene nanosheets (GNSs), carbon nanotubes (CNTs), and GNS–CNT hybrid nanofillers have been investigated. The GNSs, CNTs, and hybrid GNS–CNT were well dispersed in the PTT matrix using a simple coagulation process. GNSs were prepared from graphene oxide (GO) through hydrazine reduction, and thermal reduction of GO at two different temperatures of 1050 and 1500 °C. PTT filled with different aspect ratios and oxygen functional groups of GNS were also prepared in order to compare the electrical conductivity and EMI shielding properties. The aspect ratios of GNSs and CNTs were estimated by using an ellipsoid model. Percolation scaling laws were applied to the magnitudes of conductivity to reveal the percolation network and filler dispersion. The percolation exponent of the PTT/GNS composites was larger than that of the PTT/CNT composites. The percolated filler–filler network at which the percolation exponent changed was correlated with the filler geometric structure. GNS–CNT hybrid nanofillers formed a complex double brush structure in the PTT/GNS–CNT composites. The geometric structure, aspect ratio, and intrinsic conductivity of carbon nanofillers affected the electrical percolation threshold and EMI shielding efficiency of the composites.     

Properties of synthetic diamond and graphene nanoplatelet-filled epoxy thin film composites for electronic applications

Epoxy thin film composites filled with particulate nanofillers; synthetic diamond and graphene nanoplatelets were prepared and characterized based on tensile, thermal, and electrical properties. The influences of these two types of fillers, especially in terms of their loading, sizes and shapes, were discussed. It was found that the epoxy thin film composites incorporating synthetic diamond displayed optimum properties where the addition of synthetic diamond from 0 to 2 vol.% results in higher elastic modulus, tensile strength, elongation at break, thermal conductivity and storage modulus if compared to those of graphene nanoplatelets composites. Both thin film composites showed improvement in the glass transition temperature with increasing filler loadings. Results on the electrical conductivity of both systems showed that higher conductivity is observed in graphene nanoplatelets composites if compared to synthetic diamond composites.     

Improvement in mechanical properties of recycled GF prepreg with CNT reinforced composites using a spray coating method

Dispersion and shape of nanoparticles, as well as interfacial conditions, add significantly to difficulties in composite manufacture. In the work reported here, an innovative method of recycling composites using out-of-date prepreg was investigated in which the carbon nanotube (CNT) on the prepreg was optimally coated. Nanocomposites utilizing the out-of-date prepreg were coated with CNT and fabricated by a sheet molding method. CNT nanofillers were observed to be uniformly dispersed on epoxy prepreg by spray coating. The mechanical and interfacial properties of these CNT coated nanocomposites were improved over those of more conventionally manufactured carbon fiber/epoxy composites. The CNT nanofillers were embedded at the epoxy and fiber interface, as a result of etching of the epoxy prepreg surface by a CNT dispersion solution which enhanced interfacial reactivity.     

Manufacturing polymer/carbon nanotube composite using a novel direct process

A direct process for manufacturing polymer carbon nanotube (CNT)-based composite yarns is reported. The new approach is based on a modified dry spinning method of CNT yarn and gives a high alignment of the CNT bundle structure in yarns. The aligned CNT structure was combined with a polymer resin and, after being stressed through the spinning process, the resin was cured and polymerized, with the CNT structure acting as reinforcement in the composite. Thus the present method obviates the need for special and complex treatments to align and disperse CNTs in a polymer matrix. The new process allows us to produce a polymer/CNT composite with properties that may satisfy various engineering specifications. The structure of the yarn was investigated using scanning electron microscopy coupled with a focused-ion-beam system. The tensile behavior was characterized using a dynamic mechanical analyzer. Fourier transform infrared spectrometry was also used to chemically analyze the presence of polymer on the composites. The process allows development of polymer/CNT-based composites with different mechanical properties suitable for a range of applications by using various resins.     

Toughening of polyamide 11 with carbon nanotubes for additive manufacturing

It has been reported that the addition of nanofillers/nanoparticles into the thermoplastic polymers could enhance the toughness of the polymer matrix. In this work, the mechanical and thermal properties of a multi-walled carbon nanotubes (CNT)/polyamide 11 nanocomposite for additive manufacturing was evaluated. Well-dispersed PA11/CNT nanocomposite powders were processed successfully by laser sintering. Compared to the pristine PA11, the fracture toughness of the PA11/CNT nanocomposite was enhanced by ～54% by incorporating of only 0.2?wt% CNTs. With differential scanning calorimetry, X-ray diffraction and scanning electron microscope fractography analysis, the nanostructure and the toughening mechanism which lead to the toughness improvement was well identified and understood.     

碳纳米管/聚合物复合材料界面结合性能的研究进展

碳纳米管(CNT)优异的力学性能使其成为复合材料优选的增强体。CNT/聚合物复合材料的力学性能主要受其界面结合性能的影响。综述了CNT/聚合物复合材料界面结合性能的研究方法和研究现状。对CNT/聚合物复合材料界面结合性能的研究,实验上采用微观表征技术、拉曼光谱分析技术和纳米力学拔出法,分子模拟方法则是通过对CNT施加位移或外力模拟CNT从聚合物基体中的抽拔过程。概述了聚合物的类型、晶态结构以及CNT的手性、功能化处理等因素对CNT/聚合物复合材料界面结合性能的影响,并展望了CNT/聚合物复合材料界面结合性能未来研究的重点方向。     

Synergy derived by combining graphene and carbon nanotubes as nanofillers in composites

Both one-dimensional carbon nanotubes as well as two-dimensional graphene sheets have been extensively investigated as nanofillers in composites. However there are very few reports on their combined use in composite materials. Here we report the mechanical properties including Young's modulus, tensile strength and fatigue properties of an epoxy polymer reinforced with various combinations of graphene and carbon nanotube fillers- i.e., nanotubes alone, graphene alone and a mixture of graphene and nanotubes. We find that at low nanofillers loadings (< 0.1% weight), the graphene fillers performed better than both singlewalled as well as multiwalled carbon nanotubes. However, interestingly it was the combination of carbon nanotubes with graphene that yielded the greatest improvement in mechanical properties. Optical microscopy of thin micro-tomed slices of the composites indicated that in the presence of the nanotubes the graphene sheets appear to have aggregated into chains forming a network structure. Such long range ordering of the nanofillers is very unusual in a nanocomposite system and is likely responsible for the enhanced mechanical properties.     

Nanoscale structure and local mechanical properties of fiber-reinforced composites containing MWCNT-grafted hybrid glass fibers

Carbon nanotubes (CNTs) were grown from the surface of glass fibers by chemical vapor deposition, and these hybrid fibers were individually dispersed in an epoxy matrix to investigate the local composite structure and properties near the fiber surface. High-resolution transmission electron microscopy revealed the influence of infiltration and curing of a liquid epoxy precursor on the morphology of the CNT “forest” region, or region of high CNT density near the fiber surface. Subsequent image analysis highlighted the importance of spatially dependent volume fractions of CNTs in the matrix as a function of distance from the fiber surface, and nanoindentation was used to probe local mechanical properties in the CNT forest region, showing strong correlations between local stiffness and volume fraction. This work represents the first in situ measurements of local mechanical properties of the nano-structured matrix region in hybrid fiber-reinforced composites, providing a means of quantifying the reinforcement provided by the grafted nanofillers.     

Mechanical properties of injection-molded carbon fiber/polypropylene composites hybridized with nanofillers

Short-carbon-fiber/polypropylene composites (CF/PP composites) have high processability and recyclability but low strength. To improve the strength, various nanofillers were hybridized to form fiber-reinforced composites. Adding nanofillers improves not only the strength but also the elastic modulus, with the exception of clay nanofillers. To understand the strengthening mechanism resulting from the addition of nanofillers, the residual fiber length and interfacial shear strength were measured. For CF/PP composites, the addition of alumina, silica, and CNT improves the interfacial shear strength, and thereby, the mechanical properties. On the basis of this result, proper choice of nanofiller type and content for improving the mechanical properties of PP/CF composites is discussed.     

Modeling the tensile stress–strain response of carbon nanotube/polypropylene nanocomposites using nonlinear representative volume element

This paper presents a finite element model for predicting the mechanical behavior of polypropylene (PP) composites reinforced with carbon nanotubes (CNTs) at large deformation scale. Existing numerical models cannot predict composite behavior at large strains due to using simplified material properties and inefficient interfaces between CNT and polymer. In this work, nonlinear representative volume elements (RVE) of composite are prepared. These RVEs consist of CNT, PP matrix and non-bonded interface. The nonlinear material properties for CNT and polymer are adopted to solid elements. For the first time, the interface between CNT and matrix is simulated using contact elements. This interfacial model is capable enough to simulate wide range of interactions between CNT and polymer in large strains. The influence of adding CNT with different aspect ratio into PP is studied. The mechanical behavior of composites with different interfacial shear strength (ISS) is discussed. The success of this new model was verified by comparing the simulation results for RVEs with conducted experimental results. The results shows that the length of CNT and ISS values significantly affect the reinforcement phenomenon.     

Synergy in hybrid polymer/nanocarbon composites. A review

The aim of this review article is to report the most recent developments in the understanding of and beliefs about the properties of polymer hybrid composites that are reinforced with various combinations of nanometer-sized carbon and mineral fillers. The discussions are primarily focused on an analysis and comparison of the electrical, thermal, and mechanical properties. It is shown that the introduction of a mixed (hybrid) system of filler nanoparticles into polymer matrices enhances the macro- and microproperties of the composites as a result of the synergistic interactions between the fillers and the simultaneous creation of a unique filler network in the polymer. The synergy of various types of carbon nanofillers and combinations of nanocarbon materials with inorganic fillers manifests itself as modifications of most of the properties of hybrid polymer composites relative to the properties of a polymer system containing a single filler. The reinforcing effect is related to the structure and particle geometry of the hybrid fillers, the interactions between the fillers, the concentrations and the processing methods.The existence of synergy between different types of carbon nanofillers, as well as with mineral fillers, shows great potential and could significantly increase applications of carbon-based nanomaterials.     

Review on polymer/graphite nanoplatelet nanocomposites

Graphite nanoplatelets (GNPs) are a type of graphitic nanofillers composed of stacked 2D graphene sheets, having outstanding electrical, thermal, and mechanical properties. Furthermore, owing to the abundance of naturally existing graphite as the source material for GNPs, it is considered an ideal reinforcing component to modify the properties of polymers. The 2D confinement of GNPs to the polymer matrix and the high surface area make the GNP a distinctive nanofiller, showing superiorities in modification of most properties, compared with other carbon nanofillers. This review will summarize the development of polymer/GNP nanocomposites in recent years, including the fabrication of GNPs and its nanocomposites, processing issues, viscoelastic properties, mechanical properties, electrical and dielectric properties, thermal conductivity and thermal stability. The discussion of reinforcing effect will be based on dispersion, particle geometry, concentrations, as well as the 2D structures and exfoliation of GNPs. The synergy of GNPs with other types of carbon nanofillers used as hybrid reinforcing systems shows great potential and could significantly broaden the application of GNPs. The relevant research will also be included in this review.     

Recent Advances in Research on Carbon Nanotube–Polymer Composites

Carbon nanotubes (CNTs) demonstrate remarkable electrical, thermal, and mechanical properties, which allow a number of exciting potential applications. In this article, we review the most recent progress in research on the development of CNT–polymer composites, with particular attention to their mechanical and electrical (conductive) properties. Various functionalization and fabrication approaches and their role in the preparation of CNT–polymer composites with improved mechanical and electrical properties are discussed. We tabulate the most recent values of Young's modulus and electrical conductivities for various CNT–polymer composites and compare the effectiveness of different processing techniques. Finally, we give a future outlook for the development of CNT–polymer composites as potential alternative materials for various applications, including flexible electrodes in displays, electronic paper, antistatic coatings, bullet‐proof vests, protective clothing, and high‐performance composites for aircraft and automotive industries.     

Hybrid network structure and thermal conductive properties in poly(vinylidene fluoride) composites based on carbon nanotubes and graphene nanoplatelets

A small quantity of carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs) were introduced into the poly(vinylidene fluoride) (PVDF)/GNP and PVDF/CNT composites, respectively, to prepare the corresponding ternary PVDF/CNT/GNP and PVDF/GNP/CNT composites. The results demonstrated that adding CNTs into the PVDF/GNP composites greatly promoted the formation of the hybrid network structure of fillers. This was much different from the scenario that adding GNPs into the PVDF/CNT composites. GNPs and CNTs exhibited excellent nucleation effects for the crystallization of PVDF matrix; however, the variation of the PVDF crystallinity was small. Adding CNTs into the PVDF/GNP composites greatly enhanced the electrical conductivity of the PVDF/CNT/GNP composites. This was also different from the scenario of the PVDF/GNP/CNT composites. Furthermore, the PVDF/CNT/GNP composites exhibit higher thermal conductivity and higher synergistic efficiency compared with the PVDF/GNP/CNT composites. The conductive mechanisms and the synergistic effects of the ternary composites were then analyzed.     

Role of micro/nano fillers on mechanical and tribological properties of polyamide66/polypropylene composites

The objectives of this research article is to evaluate the mechanical and tribological properties of polyamide66/polypropylene (PA66/PP) blend, graphite (Gr) filled PA66/PP, nanoclay (NC) filled PA66/PP and NC plus short carbon fiber (NC + SCF) filled PA66/PP composites. All composites were fabricated using a twin screw extruder followed by injection molding. The mechanical properties such as tensile, flexure, and impact strengths were investigated in accordance with ASTM standards. The friction and sliding wear behaviour was studied under dry sliding conditions against hard steel on a pin-on-disc apparatus. Scanning electron micrographs were used to analyze the fracture morphologies. From the experimental investigation, it was found that the presence of NC and SCF fillers improved the hardness of PA66/PP blend. Further, the study reveals that the tensile and flexural strength of NC + SCF filled PA66/PP was higher than that of PA66/PP blend. Inclusion of micro and nanofillers reduced the wear rate of PA66/PP blend. The wear loss of the composites increased with increasing sliding velocity. The lowest wear rate was observed for the blend with nanoclay and SCF fillers. The wear rates of the blends with micro/nanofillers vary from 30–81% and lower than that of PA66/PP blend. The wear resistance of the PA66/PP composites was found to be related to the stability of the transfer film on the counterface. The results have been supplemented with scanning electron micrographs to help understand the possible wear mechanisms.     

Influence of the concentration of carbon nanotubes on electrical conductivity of magnetically aligned MWCNT–polypyrrole composites

The goal of this work is to study the effect of high magnetic pulses on electrical property of carbon nanotube–polypyrrole (CNT–PPy) composites with different CNT concentrations. CNT–PPy composites are produced in fractions of 1, 5 and 9 wt%. During the polymerization process, the CNTs are homogeneously dispersed throughout the polymer matrix in an ultrasonic bath. Nanocomposite rods are prepared. After exposure to 30 magnetic pulses, the resistivity of the rods is measured. The surface conductivity of thin tablets of composites is studied by 4-probe technique. The magnitude of the pulsed magnetic field is 10 Tesla with time duration of 1.5 ms. The results show that after applying 30 magnetic pulses, the electrical resistivity of the composites decreases depending on the concentration of CNTs in the composites. The orientation of CNTs is probed by atomic force microscopy (AFM) technique. AFM images approved alignment of CNT–polymer fibres in the magnetic field. We found that the enhancement in the electrical properties of CNT–PPy composites is due to rearrangement and alignment of CNTs in a high magnetic field. The stability of nano-composites is studied by Fourier transform infrared spectroscopy.     

The effective properties and local aggregation effect of CNT/SMP composites

A micromechanics model of the thermomechanical constitutive behavior and micro-structural inhomogeneity of carbon nanotubes (CNTs)/shape memory polymer (SMP) composites is presented. It is assumed that the CNTs are elastic and the SMP obeys a thermomechanical constitutive law. The effective properties of CNT/SMP composites are examined using a micro-mechanics method. The effect of CNT aggregation in the composite, frequently encountered in real engineering situations, is studied. The degree of aggregation is described by an aggregation coefficient, and the effective properties of SMP composites with aggregated CNTs are calculated using a stepping scheme. It is shown that the degree of CNT aggregation dramatically influences the effective properties of the CNT/SMP composites. A homogeneous microstructure leads to maximum levels of effective composite properties.     

Development of composites incorporating carbon nanofibers and nanotubes

Nanocomposites provide significantly increased modulus, thermal, and electrical properties when compared to traditional reinforced composites. Present work was undertaken to study the microstructure, thermal, and electrical properties of carbon nanostructured reinforced polymer matrix composites. Composites were made with carbon nanofibers and nanotubes (produced by CVD method) as reinforcement with thermoplastic polymers as matrices. The amount of nanoreinforcements was varied between 1 to 5 wt% in different matrices. The problems associated with dispersion of reinforcing materials have been studied. Dispersion of nanofillers in thermoplastics, microstructures, and thermal stability of the reinforced thermoplastics have been studied using SEM, DSC, and TGA. Experimental results show that small amount of carbon nanofillers present in thermoplastic matrix systems enhance the thermal, mechanical, and electrical properties of the composites.     

Progress on mechanics of carbon nanotubes and derived materials

This review focuses on the most recent progress in understanding mechanical properties of individual carbon nanotubes (CNT), carbon nanotube arrays, random networks, and polymer matrix composites. The key factors that influence the mechanical properties of these new (nano)materials are identified and discussed. The critical issue appears to be the load transfer efficiency; between nanotubes when organized in bundles, ropes, and networks; between matrix and nanotubes in composites. Among the different paths used to increase load transfer, cross-linking by irradiation is emphasized. A particular attention is paid on the role of nanotubes as nucleating agents in polymer composites, initiating the formation of a crystalline polymer sheath that has important consequence on the mechanical properties. The reinforcing element to be considered in that case is not CNT alone but CNT covered with a cylinder of crystalline polymer. Whereas a lot of effort has been focused on the problem of dispersion, it appears that the problem of nanotube-matrix interphase is almost as important. Recent works show that appropriate surface functionalization can be used both to improve dispersion and tailor the interphase. Nanotube surface engineering combined with methods producing oriented nanocomposites should bring exceptional materials in the near future.     

Fabrication of carbon-based nanocomposite films by spin-coating process: An experimental and modeling study of the film thickness

Spin-coating is used for the fabrication of nanocomposite thin films, consisting of carbon nanoparticles embedded in epoxy matrix, on Mylar substrate. The final thickness of the heat-cured film was measured as a function of the spinning speed and nanoparticle concentration. Multi-walled carbon nanotubes with carboxyl functionalization (MWCNT-COOH) or exfoliated graphite nanoplatelets (xGnP) were used as fillers. Experimental results were in good agreement with the predictions from a model that considered the rheology and flow behavior of the reinforced resin fluids on a rotating disk. The model was differentiated for Newtonian and non-Newtonian regime of the spinning polymer fluid. In case of non-Newtonian behavior of the epoxy resin at high particle concentrations, a semi-empirical approach was used to determine the model constants from rheology measurements. Results from this analysis also indicate how rheological and wetting properties of the nano-reinforced polymer fluids depend on the aspect ratio of the graphene nanoplatelets.