氮化碳涂层刀具干切削性能的研究

采用dc反应磁控溅射法在硬质合金 (YT15 )上沉积氮化碳超硬涂层 ,将其应用于干切削领域 ,通过对硅铝合金和淬火钢的干式切削试验 ,研究了氮化碳涂层刀具的切削加工性能。切削试验表明 ,在干式切削加工硅铝合金时可以达到较高的表面粗糙度 ,完全能满足生产要求 ;在淬火钢加工中 ,与未涂层的刀具相比 ,刀具寿命有较大提高     

金刚石涂层刀具在干式切削中的性能分析

介绍了干式切削加工技术的优点及发展趋势,分析了干式切削刀具技术及金刚石涂层刀具的性能特点.通过铝硅合金的干式切削试验,研究了金刚石涂层刀具的干式切削加工特性.经试验表明,金刚石涂层刀具正常磨损阶段,工件表面粗糙度非常稳定;刀具损坏以涂层脱落为主,刀具寿命取决于涂层与机体的结合强度;进给量对工件表面粗糙度影响最大,如果进给量合适,可以保证金刚石涂层刀具在高速下具有良好的干式切削性能.     

涂层硬质合金刀具干式切削淬硬钢的试验研究

通过采用涂层硬质合金刀具对淬硬 4 5钢硬态干式切削试验 ,分析硬态干式切削淬硬钢的特点 ,研究了涂层硬质合金刀具及其几何参数的优化 ,讨论了涂层硬质合金刀具磨损形式、刀具耐用度及加工表面粗糙度 ,得出了可应用于实际干式切削加工的切削条件和参数     

涂层硬质合金刀具干式切削淬硬钢的试验研究

通过采用涂层硬质合金刀具对淬硬45钢硬态干式切削试验,分析硬态干式切削淬硬钢的特点,研究了涂层硬质合金刀具及其几何参数的优化,讨论了涂层硬质合金刀具磨损形式、鼠具耐用度及加工表面粗糙度,得出院要中应用于实际干式切削加工的切削条件和参数。     

C3N4涂层刀具在切削淬火钢和硅铝合金中的应用

氮化碳是一种新型超硬材料,在高硬度、耐磨损、低摩擦系数和导热性等方面与金刚石相似。本文采用DC反应磁控溅射法在硬质合金(YT15)上沉积氮化碳超硬涂层,将其应用于干切削领域,通过对硅铝合金和淬火钢的干式切削试验,研究氮化碳涂层刀具的切削加工性能。     

考虑电流和振动的涂层铣刀磨损规律实验研究

随着切削技术向着高速、高效和干式加工等方向发展,刀具涂层和切削状态监测技术成为影响切削技术发展的主要因素,研究刀具涂层以及刀具磨损引起的切削状态改变对促进制造业发展具有重要意义。利用铣削实验得到了相同切削条件下,不同涂层的3把硬质合金刀具的加工磨损情况。通过分析各个刀具磨损过程中铣削力信号、主轴电流信号以及切削振动信号的变化,得到了无涂层、Ti Al N涂层以及Al Ti N涂层刀具在切削过程中表现出的磨损规律。结果表明:Al Ti N涂层的耐磨性能更好,3把刀具的主轴电流有效值和切削振动信号质心频率的变化均有效反映了刀具磨损情况。在立铣加工过程中,可以将上述两种特征值用于刀具磨损实时在线监测。     

清洁高速硬切削模具钢的仿真与试验研究

高速切削H13淬硬模具钢时刀具寿命短、刀具磨损严重等问题突出。基于清洁切削技术,采用硬质合金涂层刀具进行高速硬切削H13钢的仿真试验,研究干式、清洁切削介质(冷风、低温氮气和液氮)对涂层刀具硬切削性能的影响,探究运用清洁切削技术提升涂层刀具寿命的可行性。研究表明：与干式切削相比,清洁切削介质可以有效地控制切削区域温度,减少刀具磨损,延长刀具寿命;液氮切削时切削合力减少9.8%,切削区域温度下降12.4%,刀具寿命提高55.6%,可获得最好的刀具切削性能。研究可为H13钢的清洁高速硬切削加工提供参考。     

清洁切削高温合金涂层刀具切削性能及加工表面完整性

针对高温合金高速干切削刀具磨损严重、加工表面质量差等突出问题,基于清洁切削技术,采用硬质合金涂层刀具进行高速铣削高温合金GH2132试验,研究干式切削、液氮不同喷射温度对涂层刀具切削性能以及加工表面完整性的影响规律,探究运用清洁切削高温合金来延长涂层刀具寿命和提高加工表面质量的可行性。研究表明：液氮低温切削GH2132时的切削合力随喷射温度的降低而增大,切削区温度在-150～-190℃喷射时已完全处于低温状态;随着液氮喷射温度的降低,刀具涂层剥落面积明显减小,且降低了黏结磨损和氧化磨损,在-150℃喷射条件下可获得较长的刀具寿命;加工表面粗糙度S_a在-30～-150℃喷射条件下获得较小值,随喷射温度的降低,加工硬化和残余拉应力分别增大和减小;与干式切削相比,液氮切削喷射温度在-150～-190℃下可显著延长涂层刀具寿命并提高加工表面质量。     

高速轴向车铣45钢刀具磨损的研究

介绍了轴向车铣加工的特点,通过试验得到了高速轴向车铣加工45钢时刀具的磨损曲线,分析了在水冷和干切削时TiN涂层和金属陶瓷刀具的磨损特点,得出采用干切削更有利于延长刀具使用寿命,且TiN涂层刀具比金属陶瓷刀具更适合高速轴向车铣加工45钢.     

航空钛合金车削加工工艺试验研究

对α+β钛合金TC11进行车削工艺研究,采用无涂层、PVD Ti Al N涂层、金刚石涂层三种刀片在干式加工和MQL冷却状态下进行车削试验。研究不同刀具、冷却方式和加工参数对车削TC11钛合金切削力、切削温度、加工表面质量、刀具寿命和刀具磨损方式等影响规律。通过相关试验数据得出相关切削参数,为优选加工刀具提供参考。     

Analysis of tool wear patterns in finishing turning of Inconel 718

This paper focuses on the analysis of tool wear mechanisms in finishing turning of Inconel 718, one of the most used Ni alloys, both in wet and dry cutting. Cemented carbides, ceramics and CBN tools are suitable for machining Ni alloys; coated carbide tools are competitive for machining operations of Ni alloys and widely used in industry. Commercial coated carbide tools (multilayer coating TiAl/TiAlN recommended for machining Ni alloys) were studied in this work. The feasibility of two inserts tested for dry cutting of Inconel 718 has been shown in the work. Experimental test were performed in order to analyze wear patterns evolution. It was found great influence of side cutting edge angle in tool wear mode.     

涂层Si_3N_4陶瓷刀具切削性能研究

研究了不同切削参数对TiN+Al2O3涂层氮化硅陶瓷刀具切削灰铸铁的切削性能的影响,使用工具显微镜、SEM/EDS手段分析了涂层氮化硅刀具的磨损机理,实验还采用相同基体氮化硅陶瓷刀具做了对比分析。研究结果显示TiN+Al2O3涂层氮化硅刀具可以承受比较大的切削用量,对提高加工效率有重大意义;还发现涂层氮化硅陶瓷刀具主要失效形式为磨粒磨损,粘结磨损,在较高切削速度条件下前刀面还会出现因化学磨损形成的月牙洼。     

Comparative study on tool life and wear resistance of titanium nitride (TiN) and aluminium chromium nitride (AlCrN) coated carbide inserts

Abstract

The objective of this study is to investigate the enhancement of tool life and wear resistance with a physical vapour deposition (PVD) process applied using aluminium chromium nitride (AlCrN) and titanium nitride (TiN) coating on carbide inserts. Flank wear experiments are carried out on a computer numerically controlled (CNC) machine under wet conditions with both the coated inserts. Effectiveness of the coating on the tool life and its resistance to flank wear are observed at various cutting parameters such as cutting speed and feed rate by following the principle of design of experiments (DOE). It is inferred that AlCrN coated carbide tools perform nearly 70% better than the TiN coated carbide tools under high cutting speed and feed rate. AlCrN coating also enhances the durability of tool for metal cutting and thereby improves tool life even under harsh cutting conditions. A response surface methodology (RSM) is utilised to arrive at the optimum value for the various parameters which are responsible for improving the wear resistance and tool life.     

High-Speed Machining of Malleable Cast Iron by Various Cutting Tools Coated by Physical Vapor Deposition

The coating material of a tool directly affects the efficiency and cost of machining malleable cast iron.However,the machining adaptability of various coating materials to malleable cast iron has been insufficiently researched.In this paper,turning tests were conducted on cemented carbide tools with different coatings(a thick TiN/TiAlN coating,a thin TiN/TiAlN coating,and a nanocomposite(nc)TiAlSiN coating).All coatings were applied by physical vapor deposi-tion.In a comparative study of chip morphology,cutting force,cutting temperature,specific cutting energy,tool wear,and surface roughness,this study analyzed the cutting characteristics of the tools coated with various materials,and established the relationship between the cutting parameters and machining objectives.The results showed that in malleable cast iron machining,the coating material significantly affects the cutting performance of the tool.Among the three tools,the nc-TiAlSiN-coated carbide tool achieved the minimum cutting force,the lowest cutting tempera-ture,least tool wear,longest tool life,and best surface quality.Moreover,in comparisons between cemented-carbide and compacted-graphite cast iron machined under the same conditions,the wear mechanism of the coated tools was found to depend on the cast iron being machined.Therefore,the performance requirements of a tool depend on multiple factors,and selecting an appropriately coated tool for a particular cast iron material is essential.     

铁基粉末冶金材料的高速干切削试验研究

用陶瓷刀具、涂层刀具和硬质合金刀具进行了铁基粉末冶金零件的干切削对比试验,研究了切削速度、切削深度以及进给速度与刀具耐用度和加工表面粗糙度的关系,分析了陶瓷刀具的磨损机理。结果表明所选用陶瓷刀具的切削性能明显优于涂层刀具和硬质合金刀具;陶瓷刀具前刀面主要磨损形式为月牙洼磨损与剥落,后刀面的主要磨损原因为磨粒磨损;认为陶瓷刀具更适合用于粉末冶金零件的切削加工。     

不同涂层刀具切削淬硬H13钢加工性能研究

为了研究不同涂层刀具切削淬硬H13钢的切削性能,进行了多层Ti化合物涂层、TiAlN涂层以及MTTiCN厚Al_2O_3TiN涂层材料刀具车削加工淬硬H13钢试验,分析了不同的涂层材料刀具与切削力、切削温度、涂层刀具磨损以及刀具寿命的关系。研究得出:多层Ti化合物涂层刀具受到三个方向的力都大于其它两种涂层的刀具,而且切削温度最高;用TiAlN涂层刀具切削时温度最低;切削过程中三种刀具后刀面磨损程度不同,发现多层Ti化合物涂层刀具磨损最为严重,寿命最短;MT-TiCN厚Al_2O_3Ti N涂层材料刀具比多层Ti化合物涂层刀具寿命长30%;TiAlN涂层刀具的切削寿命最长比多层Ti化合物涂层刀具寿命长45%。     

高硅铝合金的金刚石涂层刀具铣削损伤机理研究

高硅铝合金由于硅含量很高,故切削加工性较差,切削刀具极易磨损且已加工表面存在大量缺陷.为进一步研究材料加工损伤,采用化学气相沉积法制备了金刚石涂层铣刀,开展70％Si/Al(70％指质量分数)合金材料铣削试验.试验研究了铣削力、刀具磨损及加工损伤机理,并与常用TiN涂层铣刀进行了对比.结果 表明:铣削过程中由于初晶硅硬...