Universality and the scaling laws in the superfluid phase transition of3He-4He mixtures

From the second-sound velocityU ₂ near the superfluid transition point, the superfluid densities in³He-⁴He mixtures, _s (X) and _s (), were deduced along the paths of constant³He concentrationX and of constant chemical potential difference of³He and⁴He. The following critical exponents of _s are determined: (a) =XX for _s (X) in the(X, T) plane,(b) X for _s (X) in the(, T) plane, and(c) for _s () in the(, T) plane. It is found that and _X change by about 4–6% relative to with increasing³He concentration up toX=0.4 and by 8–10% up toX=0.53. It seems that, belowX=0.53, universality hold for . Values of have been found to be in good agreement with the critical exponent of _s in pure⁴He under constant pressure. The values of and _X forX0.53 are also found to be consistent with the scaling relations in the (,T) plane of³He-⁴He mixture.Work performed in part while at the Electrotechnical Laboratory.     

Second-order wave force on a large cylinder

Summary A new technique has been developed for estimating the wave loadings on large circular cylinders. The theory, mainly due to Lighthill, has been applied to the case of large cylinders. Comparison with the previously reported experimental results shows favourable agreement for the range of parameters indicated in the graphs.Notations The following symbols are used in this paper a Wave amplitude - b Radius of the cylinder - D Diameter of the cylinder - F _l Linear force - F _d Dynamic force - F _q Quadratic force - F _w Water line force - g Acceleration due to gravity - h Depth of water - H=2a Total wave height - k Wave number,k=2/L - L Wave length - n Outward normal to body surface - n _x Direction cosine between the normaln and the given force - S Body surface - t Time - T Wave period - x, y, z Cartesian coordinates - r, ,z Cylindrical coordinates - W Vertical velocity of fluid - Density of fluid - Wave frequency, =2/T - Total velocity potential - _r , _z Partial derivatives with respect tor andz, respectively - ⁽¹⁾, _l Linear theory velocity potential - ⁽²⁾, _q Second-order velocity potential - Water surface elevation or wave height - _i Linear theory wave height - _q Quadratic theory wave height With 3 Figures     

Computation of particle settling speed and orientation distribution in suspensions of prolate spheroids

A numerical technique for the dynamical simulation of three-dimensional rigid particles in a Newtonian fluid is presented. The key idea is to satisfy the no-slip boundary condition on the particle surface by a localized force-density distribution in an otherwise force-free suspending fluid. The technique is used to model the sedimentation of prolate spheroids of aspect ratio b/a=5 at Reynolds number 03. For a periodic lattice of single spheroids, the ideas of Hasimoto are extended to obtain an estimate for the finite-size correction to the sedimentation velocity. For a system of several spheroids in periodic arrangement, a maximum of the settling speed is found at the effective volume fraction (b/a)²04, where is the solid-volume fraction. The occurence of a maximum of the settling speed is partially explained by the competition of two effects: (i) a change in the orientation distribution of the prolate spheroids whose major axes shift from a mostly horizontal orientation (corresponding to small sedimentation speeds) at small to a more uniform orientation at larger , and (ii) a monotonic decrease of the the settling speed with increasing solid-volume fraction similar to that predicted by the Richardson–Zaki law (1–)⁵⁵ for suspensions of spheres.     

Determination of the local angular radiation coefficients in certain two-body systems

A method is shown and formulas are derived by which local angular radiation coefficients can be determined in certain two-body systems where the configuration is arbitrary but one of the bodies is either a cylinder or a rectangular plate.Notation _int radiation vector of body 1 - _E ^int intrinsic radiation intensity of body 1 - _x, _y, _z components of the geometrical radiation vector along rectangular coordinates - r₀=x²+z² shortest distance from point M(x, y, z) to linear radiator - ₀ , ₀ ^' angles subtending the two segments of the linear radiator from point M(x, y, z) on area element 2 of irradiated surface - l length of the cylinders - x, y, z space coordinates of point M Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 22, No. 6, pp. 1080–1088, June, 1972.     

Rheological properties of aqueous silicon nitride suspensions

The effect of surface modification of Si₃N₄ particle on the colloidal behavior and the rheological properties of aqueous Si₃N₄ suspensions under steady and oscillatory conditions are investigated in detail. Due to the decrease of the oxidizing level, the isoelectric point (IEP) of the modified particle shifts to basic region gently. Attempts have been made to apply rheological models to the suspensions with various solid volume fraction (). For the as-received suspensions, the Sisco model provides the best fit in the range of 0.30 while the Casson model in 0.35 0.45. The shear behavior of modified suspensions fits to Sisco model in the range of 0.40 and Casson model in 0.45 0.54. The rheological behavior of modified suspensions is improved efficiently. The critical strain decreases and the linear viscoelastic regime narrows continuously with increasing solid concentration. For the modified suspensions, the linear viscoelastic regime broadens and the corresponding elastic modulus decreases sharply. With increasing solid concentration, the characteristic frequency shifts toward lower frequencies and the suspension transforms from more viscous to more elastic.     

Environmental crazing in a glassy polymer: the role of solvent absorption

According to a recent theory of Andrews and Bevan, the work of solvent craze formation, ₀ is governed by the cavitation properties of a solvated zone of polymer at the craze tip. In particular, the shear yield stress of this zone and its temperature dependence dictate the variation of ₀ with temperature. In order to investigate this matter further, samples of poly-methylmethacrylate were swollen to equilibrium in a variety of alcohols at different temperatures, and the equilibrium polymer fraction ₂ determined as a function of temperature and solvent. The variation of yield stress with ₂, solvent and temperature was also investigated, and the glass transition temperatures determined as functions of ₂ and solvent.The temperature at which the equilibrium swelling was just sufficient to depress the polymerT _g to a co-incident value was found to correspond closely to the characteristic temperature, identified by Andrews and Bevan, at which the temperature dependence of ₀ changes abruptly. This is shown to be in complete accord with the cavitation theory referred to.     

Disappearance of Bose-Glass Behavior in Transport Properties of YBa2Cu3O y Films with Columnar Defects

The glass transitions of the vortex system in Au-ion irradiated YBa₂Cu₃O _y films have been studied by the measurements of transport properties as a function of magnetic field B and angle of B to the direction of columnar defects. At =0°, we find an anomalous upturn behavior of the glass transition line B _g(T) at BB /3, where B is the matching field. In B>B /3, the dependence of glass transition temperature T _g reveals cusplike behavior with a peak at =0°, which is consistent with the Bose glass theory. In B<B /3, on the other hand, T _g is almost independent of , suggesting the system undergoes the vortex glass transition induced by the inherent point-like defects.     

Rubber toughening of plastics

Creep measurements were made on a series of six ABS blends containing 0 to 20 vol% of 80m glass beads. At small strains, the beads raised the modulus of the ABS. However, debonding of the polymer from the glass resulted in a rapid drop in modulus with increasing strain and bead content, and at strains above 1.0% the order of stiffnesses was reversed. Debonding resulted in an increase in creep rate with, as measured by the time to reach 1% volume strain. Plots of In ^–1 against applied stress were linear, in accordance with the Eyring equation, and provided data for comparing stress concentration factors. The relationship between and fitted approximately to the Ishai Cohen effective area model. It is concluded that debonded glass beads accelerate multiple crazing by increasing average stresses in the ABS matrix, and in that respect resemble rubber particles. However, unlike rubber particles, debonded beads drastically reduce notched Charpy impact strength.     

Kondo Impurity in a Mesoscopic Ring: Charge Persistent Current

We study the influence of a magnetic impurity or ultrasmallquantum dot on the charge persistent current of a mesoscopicring. The system consists of electrons in a one-dimensionalring threaded by spin-dependent Aharonov–Bohm/Casher fluxes,coupled via an antiferromagnetic exchange interaction to alocalized electron. By passing to a basis of electron stateswith definite parities, the problem is mapped onto a Kondomodel for the even-parity channel plus free electrons in theodd-parity channel. The twisted boundary conditionsrepresenting the fluxes couple states of opposite parityunless the twist angles satisfy =f,where f are integers, with spin index=, . For these special values of, the model is solved exactly by a Bethe ansatz.Special cases are investigated in detail. In particular weshow that the charge stiffness in the case= is insensitive to the presenceof the magnetic impurity/quantum dot.     

Collective oscillations at long wavelengths in liquid4He

The recent successful calculation of the lower collective branch of the excitation spectrum in liquid ⁴ He by Sunakawaet al. contains a phenomenological parameter (k) whose relation to microscopic theory is obscure. To clarify matters, an exact identity is presented for the absorptive part of the density-density correlation function and is employed to show that Pines' zero-sound concept of the phonon in liquid ⁴ He is accurate in the limit of infinitely long wavelengths. Since the zero-sound theory can be made to produce an explicit relation between (k) and the two-particle potential in the liquid, the foundation has been laid for a microscopic expression for the excitation spectrum in the range of very low wave numbers, where the classic Feynman theory of the phonon is known to be accurate. A numerical calculation of (k) using this expression results in a theoretical excitation spectrum which is in excellent agreement with neutron scattering measurements in the regionk0.4 Å ^–1 .     

Effect of wall conductances on hydromagnetic flow and heat transfer in a rotating channel

Summary Wall conductance effects on the hydromagnetic flow and heat transfer between two parallel plates in a rotating frame of reference has been studied when the liquid is permeated by a transverse magnetic field. An exact solution of the governing equations has been obtained. It is found that the velocity, current density and the temperature depend only on the sum of the wall conductances ₁ + ₂ = but magnetic field depends on the individual values of ₁ and ₂, where ₁ and ₂ are respectively the wall conductance ratios of the upper and lower walls.

---

Einfluß der Wandleitfähigkeit auf die hydromagnetische Strömung und den Wärmeübergang in einem rotierenden Kanal

Zusammenfassung In der Arbeit wird der Einfluß der Leitfähigkeit der Wände auf die MHD-Strömung sowie auf den Wärmeübergang untersucht für den Fall, daß sich das zähe Medium zwischen zwei rotierenden Platten befindet und ein Magnetfeld parallel zur Rotationsachse angelegt wird. Es wird eine exakte Lösung des Problems gegeben. Es zeigt sich, daß die Geschwindigkeit, die Stromdichte und die Temperatur nur von der Summe der Leitfähigkeiten der Wände + ₂ = abhängen, dagegen hängt die magnetische Feldstärke von den individuellen Werten ₁ und ₂ ab, wobei ₁ und ₂ die Leitfähigkeiten der oberen bzw. unteren Wand bezeichnen.

---

---

With 5 Figures     

Correlation of burst pressure of GRP cylinders with the stress wave factor

Glass fibre-reinforced plastic (GRP) cylinders are increasingly used for highly stressed structural elements. The higher the demands on the materials, the higher are the fault detection requirements to be met by non-destructive materials testing methods. Acousto-ultrasonics is a valuable aid for the non-destructive evaluation of GRP composite materials, because it may be the answer to evaluating effects of subtle defects in composites. The aim of the research is to evaluate the burst pressure of GRP cylinders by acousto-ultrasonics techniques. The theoretical results have been found to be in good agreement with the experimental values. Hence the results strongly suggest that stress wave factor measurements can be exploited successfully to predict burst pressure of GRP cylinders.Nomenclature P Internal pressure, kgf cm^–2 - d Internal diameter, cm - t Thickness of cylinder, cm - (N ,N ,N ) Resultant forces, kgf - (M ,M ,M ) Moments, kg cm - [A] Extensional stiffness matrix - [B] Bending stretching coupling matrix - [D] Flexural stiffness matrix - ( ⁰ , ⁰ , ⁰ ) Midplane strains - (k ,k ,k ) Curvatures - n Number of laminae - Z Distance from midplane, cm - _u Ultimate tensile strength of GRP composite, kg cm^–2 - S _W Stress wave factor - m Material parameter - Filament winding angle     

Hydraulic resistance of rotating tubes

Parametric relations have been obtained, based on experimental data, for the hydraulic resistance coefficient of rotating tubes, allowing for the action of mass forces on the fluid flow.Notation d tube internal diameter - F mass force referred to unit volume - F^* mass force applied to a fluid particle - F excess mass force (difference between the mass forces of two characteristic points of the system) - K similarity parameter - j difference between the inertia accelerations at two points of the system - l characteristic dimension - M moment of momentum of a fluid particle - n number of revolutions of the tube in unit time - r radial coordinate, tube radius - Re Reynolds number, based on the mean mass velocity of the fluid motion - Re_circ Reynolds number based on the circular velocity of fluid motion - S similarity parameter - u circular velocity of the inner surface of the tube - v volume of a fluid particle - w mean mass velocity of the fluid - v kinematic viscosity - ₀ - coefficient of hydraulic resistance of a rotating tube - ₀ same for a fixed tube - fluid density - angular velocity of rotation of the tube     

Vibrational properties of wood along the grain

The dynamic Young's modulus (E_L) and loss tangent (tan _L ) along the grain, dynamic shear modulus (G_L) and loss tangent (tan _S) in the vertical section, and density () of a hundred spruce wood specimens used for the soundboards of musical instruments were determined. The relative acoustic conversion efficiency ( ) and a ratio reflecting the anisotropy of wood (, (E_L/G_L)(tan _S/tan _L)) were defined in order to evaluate the acoustic quality of wood along the grain. There was a positive correlation between and , and the variation in was larger than that in . It seemed logical to evaluate the acoustic quality of spruce wood by a measure of . By using a cell wall model, those acoustic factors were expressed with the physical properties of the cell wall constituents. This model predicted that the essential requirement for an excellent soundboard is smaller fibril angle of the cell wall, which yields higher and higher . On the other hand, the effects of chemical treatments on the and of wood were clarified experimentally and analyzed theoretically. It was suggested that the and of wood cannot be improved at the same time by chemical treatment.     

Effect of Normal-State Pseudogap on Physical Quantities in Hubbard Model for Underdoped High-T c Cuprates

We develop the strong-coupling theory of coexisting charge-density-wave (CDW) and superconductivityd-wave gaps within the framework of the FLEX (fluctuation exchange) approximation for the two-dimensional Hubbard model. For nested sections of the Fermi surface these equations reduce to the previous FLEX equations for superconductivity where the squared energy gap _s ² in the denominator of the Green's function is replaced by ( _s ² + _c ² ) (here _s is the superconductivity and _c the CDW gap). We solve these equations by taking for _c a phenomenologicald-wave gap. The resulting neutron scattering intensity, spin-lattice relaxation rate 1/T₁ , Knight shift, resistivity, and photoemission intensity are in qualitative agreement with the data on underdoped high-T_c cuprates. TheT_c for superconductivity decreases and the crossover temperature T_* for 1/T₁Tincreases with increasing gap amplitude of _c which is in qualitative agreement with the phase diagram for underdoped cuprates.     

Comparison of energy and phase relaxation in metallic wires

We have determined the phase coherence time, , frommagnetoresistance measurements of long, narrow wires ofAu, Ag, and Cu, over the temperature range40 mK-6 K. In the Cu and Au wires, saturates at low temperature. In the Ag wire, continues to increase down to the lowesttemperatures measured; moreover, its temperature dependencebelow about 1 K is consistent with theoreticalpredictions of Altshuler, Aronov and Khmelnitskii published in1982. These results cast doubt on recent assertions thatsaturation of at low temperature is a universalphenomenon in metal wires. We compare these results with thoseof recent experiments on energy relaxation in similar metallicwires. The results of the two experiments are stronglycorrelated, suggesting that a single (unknown) mechanism isthe cause of the enhanced phase and energy relaxation observedin some samples.     

Temperature-enthalpy approach to the modelling of self-propagating combustion synthesis of materials

A new temperature-enthalpy approach has been proposed to model self-propagating combustion synthesis of advanced materials. This approach includes the effect of phase change which might take place during a combustion process. The effect of compact porosity is also modelled based on the conduction, convection and radiation in the local scale. Various parametric studies are made to analyse numerically the effects of activation energy, non-reacting phase content, porosity, Biot number, etc. The model predictions of the combustion pattern are in close agreement with those observed in experiments.Nomenclature c Concentration (wt %) - B _i Biot number =hL/k - f Fractional value - c _p Specific heat (J kg^–1 K) - h Heat-transfer coefficient (W m^–2 K) - L Height of material,m - Q Heat of reaction (J kg^–1) - H _SL ^* Latent heat of fusion (J kg^–1) - H _SE ^* Latent heat of fusion at eutectic (J kg^–1) - k Thermal conductivity (W m^–1 K) - k Equilibrium partition coefficient - Reaction kinetic function - t Time (s) - Non-dimensional time - T Temperature (K) - T ₀ Initial temperature (K) - Non-dimensional temperature - H Enthalpy (J kg^–1) - Kinetic function - Non-dimensional enthalpy - v _f Volume fraction of non-reactive phase - V Volume (m₃) - k ₀ Pre-exponential constant to reaction rate (s^–1) - z Cartesian co-ordinate - z^* Non-dimensional co-ordinate - Non-dimensional reacted fraction - Density (kg m^–3) - A non-dimensional temperature - Pore surface emissivity - Planck's constant - i Initial state - r Reacted state - l, L Liquid state - s Solid state - E Eutectic - M Melting point of pure material - P Centre of control volume - s Southern side of central volume - S Southern control volume - n Northern side of central volume - N Northern control volume - * Non-dimensional term - n New time level - o Old time level - m Iteration level     

Theory of periodically driven,current-carrying,superconducting filaments. I. Spatially homogeneous states

Starting from the nonequilibrium theory of dirty superconductors in the Ginzburg-Landau regime, spatially homogeneous states with an applied currentI=I ₀+I ₁ cos (t) are considered. Expressions for the linear response (I₁ small) valid up to high frequencies (k _BT_c) are derived and evaluated analytically for the experimentally important case of smallI ₀ and ₀(T). Then the nonlinear response is treated for frequencies with _E1. Interesting new behavior is found for frequencies ₀ 1, where ₀ is essentially the GL relaxation time.     

Hydrodynamic reaction to accelerated onedimensional motion of gas bubbles of variable volume in an unbounded liquid

A solution is given for the problem of the hydrodynamic reaction of an ellipsoidal gas bubble of variable volume to accelerated motion and the relation between the value of the apparent mass and the eccentricity of the bubble.Notation (,) velocity potential - V velocity of motion of the bubble with respect to the liquid - (, ) velocity potential of the near field - T₂ kinetic energy of the liquid due to the variation in bubble volume - F_r reaction force of the liquid - B₁ momentum of the liquid - _e apparent mass of the ellipsoid - density of the liquid - V_e volume of the ellipsoidal bubble Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 47–50, July, 1980.     

Investigations of the copper isotope effect in oxygen-deficient YBa2Cu3O7−δ

We present data on the copper isotope effect (⁶³Cu-⁶⁵Cu), C_u =-nT_c/nm_Cu, for two isotopic pairs of oxygen-deficient YBa₂Cu₃O_7–, where varies between 0.06 and 0.52. _Cu is below 0.01 at =0.06 (fully oxygenated), it takes values between –0.14 and –0.34 in the 60 K plateau. Larger negative values of _Cu are observed away from the plateau. The dependence of _Cu is similar to that of the pressure effect dnT_c/dP.