Spin states and glassy magnetism in LaCo1−xNixO3 (0 ≤ x ≤ 0.5)

We investigated the effect of Ni substitution on electronic structure and magnetic properties of perovskite LaCoO₃ in the substitution range 0 ≤ x ≤ 0.5. A homovalent +3 state and spin state transition of Co⁺³ has been observed upon Ni substitution in x-ray absorption measurements at the Co and the Ni K-edges. Thermally driven spin state transition has been found to disappear with Ni substitution. A change in nature of magnetic interactions from antiferromagnetic to ferromagnetic and spin glass behavior with substitution is observed in dc and ac magnetization measurements. Ni substitution has been found to lower the average effective magnetic moment which has been ascribed to the decrease in Co/Ni ratio. Changes in fine structure and magnetic properties due to Ni substitution have been explained through the stabilization of intermediate spin state of Co⁺³ by the lattice expansion induced changes in crystal field. The Jahn-Teller distortion is assumed to be suppressed in the expanded lattice and possibility of antiferro-orbital ordering has been proposed for the ferromagnetic super-exchange interactions Co⁺³(IS)–O–Co⁺³(IS). The present work provides possible explanation for the ambiguity in the origin of FM in Co and Ni based perovskite cobaltites as well as supports the idea of lattice expansion induced ferromagnetism.     

Thermal stability and transport studies of (100 − 2x)TeO2-xAg2O-xWO3 (7.5 ≤ x ≤ 30) glass system

Differential scanning calorimetry (DSC), infrared (IR) and direct current (DC) conductivity studies have been carried out on (100 − 2x)TeO₂-xAg₂O-xWO₃ (7.5 ≤ x ≤ 30) glass system. The IR studies show that the structure of glass network consists of [TeO₄], [TeO₃]/[TeO₃₊₁], [WO₄] units. Thermal properties such as the glass transition (T_g), onset crystallization (T_o), thermal stability (ΔT), glass transition width (ΔT_g), heat capacities in the glassy and liquid state (C_pg and C_pl), heat capacity change (ΔC_p) and ratios C_pl/C_pg of the glass systems were calculated. The highest thermal stability (237 °C) obtained in 55TeO₂-22.5Ag₂O-22.5WO₃ glass suggests that this new glass may be a potentially useful candidate material host for rare earth doped optical fibers. The DC conductivity of glasses was measured in temperature region 27-260 °C, the activation energy (E_act) values varied from 1.393 to 0.272 eV and for the temperature interval 170-260 °C, the values of conductivity (σ) of glasses varied from 8.79 × 10⁻⁹ to 1.47 × 10⁻⁶ S cm⁻¹.     

Structural and superconducting properties of Bi1.7Pb0.4Sr2 − xYbxCa1.1Cu2.1Oy system

The structural, electrical and superconducting properties of Bi_1.7Pb_0.4Sr_2 − xYb_xCa_1.1Cu_2.1O_y system has been studied for different Yb concentrations. The samples are prepared by solid state synthesis in the polycrystalline bulk form. Structural analysis by X-ray diffraction, microstructural examination by SEM and measurements of electrical and superconducting properties have been conducted to study the effects of Yb substitution at Sr site. The critical temperature (T_C) and critical current density (J_C) are found to increase drastically with Yb substitution. Maximum values of T_C and J_C are observed for x = 0.3 and x = 0.2 respectively. The increase in T_C and J_C is explained due to the substitution effect of Yb³⁺ in place of Sr²⁺ and consequent change in the hole concentration in the CuO₂ planes. Above the optimum levels T_C and J_C begin to reduce due to secondary phase formation. A metal-insulator transition originating from the change of carrier concentration is found to occur at higher doping level (x > 0.5).     

Influence of SnO2 addition on the thermoelectric properties of Zn1 − xSnxO (0.01 ≤ x ≤ 0.05)

The grain size and the density of the Zn_1 − xSn_xO (0 ≤ x ≤ 0.05) samples decreased with increasing SnO₂ content. The addition of a small amount of SnO₂ (x ≤ 0.01) to ZnO led to an increase in both the electrical conductivity and the absolute value of the Seebeck coefficient, resulting in a significant increase in the power factor. The thermoelectric power factor was maximized to a value of 1.25 × 10⁻³ Wm⁻¹ K⁻² at 1073 K for the Zn_0.99Sn_0.01O sample.     

Structural, magnetic, and electronic characterization of double perovskites BixLa2−xMnMO6 (M = Ni, Co; x = 0.25, 0.50)

A newly substituted series of perovskites, Bi_xLa_2−xMnMO₆ with M = Ni, Co and x = 0.25, 0.50, were synthesized using a citrate sol-gel technique. The crystal structure, established from neutron diffraction, is a distorted double perovskite with partial transition metal B-site ordering. These perovskites crystallize in the centrosymmetric space group, P2₁/n, with structures that are similar to the x = 0 end members. All samples are prone to non-stoichiometry involving substitution of Mn onto the Ni/Co sites, in addition to varying degrees of antisite disorder. The neutron powder diffraction and magnetization measurements reveal ferromagnetism in all samples with ordering temperatures between 220 K and 280 K. The M = Co samples have lower Curie temperatures, but higher coercivities. There is a clear link between the degree of transition metal site disorder and the saturation magnetization values. Electrical measurements demonstrate the presence of mixed ionic and electronic conductivity.     

Oxide-ion conductivity in CuxCe1−xO2−δ (0 ≤ x ≤ 0.10)

Up to 10 at.% of copper readily substitutes for cerium in ceria. It is found that at oxygen partial pressures between 0.21 atm and 10⁻⁵ atm, Cu_xCe_1−xO_2−δ (0 ≤ x ≤ 0.10) solid solution behave as an oxide-ion electrolyte. Interestingly, Cu_0.10Ce_0.90O_2−δ exhibits the oxide-ion conductivity of ca. 10⁻⁴ Ω⁻¹ cm⁻¹ at 600 °C at an oxygen partial pressure of 10⁻⁵ atm.     

Synthesis, structural and magnetic properties of La1−xCdxFeO3 (0.0 ≤ x ≤ 0.3) orthoferrites

Nanocrystalline La_1−xCd_xFeO₃ (0.0 ≤ x ≤ 0.3) solid solutions have been synthesized by a single-step solution combustion method at a relatively low temperature of 400 °C. The combustion-synthesized solid solutions were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), and magnetic measurements. The crystal structure examined by XRD indicates that the samples were single-phase, and crystallize in an orthorhombic (space group, Pbnm no. 62) structure. The parent and doped compounds showed canted antiferromagnetic behavior associated with an increase in magnetic moment with Cd doping. The changes in magnetic properties of the materials are correlated to the changes in structural features resulting from the Rietveld structural refinement of the materials.     

Synthesis, structural and magnetic studies of the CuCr1−xRhxO2 delafossite solid solution with 0 ≤ x ≤ 0.2

The CuCr_1−xRh_xO₂ series is investigated by X-ray diffraction, magnetization measurements and Raman spectroscopy on ceramic samples. It is found that a delafossite solid solution is maintained up to x = 0.2 in CuCr_1−xRh_xO₂. The small observed variation in cell parameters is consistent with the small difference between the ionic radii of Cr³⁺ and Rh³⁺. A significant broadening of X-ray reflections is observed and when analyzed using the Williamson-Hall relationship showed that the strain generated by Rh substitution is strongly anisotropic, affecting mainly (Cr,Rh)-O bonds in the ab plane. Room temperature Raman spectra displayed three main Raman active modes. All modes shift to lower frequency and undergo significant changes in intensity with increasing Rh content, showing the effect of Rh atoms on the M³⁺-O bond strength. The magnetic behavior of CuCr_1−xRh_xO₂ samples was investigated as a function of temperature and applied field. At high temperature paramagnetic behavior, and at low temperature, evidence for weak ferromagnetism, reinforced by a hysteresis loop at 4 K is observed. The magnetic behavior of CuCr_1−xRh_xO₂ is attributed to the disorder of Cr and Rh in octahedral sites resulting in short-range Cr-O-Cr and Cr-O-Rh interactions, which give rise to short-range weak ferromagnetism.     

Synthesis and electrical properties of ordered perovskite oxide Cd3−x−yCuxAyTeO6 (A = Li, Na; 0.00 ≤ x, y ≤ 0.15)

Polycrystalline Cd_3−x−yCu_xA_yTeO₆ (A = Li, Na) samples were prepared by solid-state reaction, and their crystal structure and electrical properties were investigated. In Cd_3−xCu_xTeO₆ and Cd_3−yA_yTeO₆ (A = Li, Na), the maxim solubility of x and y was 0.15 and 0.15 for A = Li, 0.05 for A = Na, respectively. For co-substituted samples Cd_2.9−yCu_0.1Li_yTeO₆ and Cd_2.9−yCu_0.1Na_yTeO₆, the maxim solubility of x was the same as single substitution above-mentioned. The alkali-metal substituted samples Cd_3−yA_yTeO₆ (A = Li, Na) showed a negative Seebeck coefficient, which indicates that the major conduction carriers are electron. On the other hand, the co-substituted samples Cd_2.9−yCu_0.1A_yTeO₆ (A = Li, Na) represented a positive Seebeck coefficient, and major conduction carriers were hole through substitution by copper ions.     

Properties of the PLZTN x/54/46 (0.4 ≤ x ≤ 1.4) ceramic system

Even though the PZT ceramic system has been thoroughly studied and modified with different additives, no numerous reports have been published focusing on the PZT double ‘soft’ modification with La³⁺ and Nb⁵⁺ (PLZTN). In this paper, we explore the structural, morphological, dielectric, ferroelectric and piezoelectric properties of the PLZTN system for different doping levels (x_La3+ = x_Nb5+ = 0.4, 0.6, 0.8, 1.0 and 1.4 at.%) synthesized by conventional powders reaction. The temperature dependence of the piezoelectric response of poled ceramic disks is also analyzed and, according to its overall features, an optimum modification is proposed in order to develop PZT-based sensors for several applications.     

Magnetic and electrical properties of Ba2CrMo1 − xWxO6 double perovskite

Effects of the partial substitution of W^5+,6+ for Mo^5+,6+ on the structural and physical properties of Ba₂CrMoO₆ have been investigated. Polycrystalline Ba₂CrMo_1 − xW_xO₆samples have been prepared by sol-gel method in a stream of 5% Ar/H₂ gas at various sintering temperatures. Rietveld analysis of X-ray diffraction patterns shows a partial disorder of Mo/W and Cr on the B sites of the double perovskite, which plays a dominant role in the structural and magnetic properties of these compounds. The symmetry is cubic (Fm3?m) for all samples, and no phase transition was detected for Ba₂CrMo_1 − xW_xO₆. The Curie temperature T_C has been analyzed by two methods: a linear extrapolation of M(T) to zero magnetization and the thermodynamic model. The experimental results indicate that T_C decrease from 335 K (x = 0) to 285 K (x = 0.5) with increasing W substitution independently of the method used to obtain T_C. A systematic decrease in saturation magnetization, M_s with increasing W substitution has been observed in this solid solution series. This decrease of magnetization arises from the disorder at the Cr and Mo/W sites. Electrical properties change as well strongly along the series.     

Electron paramagnetic resonance (EPR) of antiferromagnetic nanoparticles of La1−xSrxCrO3 (0.000 ≤ x ≤ 0.020) synthesized by combustion reaction

Nanocrystalline particles of La_1−xSr_xCrO₃ (0.000 ≤ x ≤ 0.020) compounds were synthesized in order to investigate the antiferromagnetic (AFM) to paramagnetic (PM) phase transition temperature, g-factor, line width and intensity by electron paramagnetic resonance (EPR). All samples were synthesized by combustion reaction method using strontium nitrate, lanthanum nitrate, chromium nitrate and urea as fuel without subsequent heat treatment. X-ray diffraction patterns of all systems showed broad peaks consistent with orthorhombic structure of LaCrO₃. The absence of extra reflections in the diffraction patterns of as-prepared materials ensures the phase purity. The average crystallite sizes determined from the prominent (1 1 2) peak of the diffraction using Scherrer's equation was independent of the addition of Sr²⁺ ions; being ca. 31–29 nm for x = 0.000 and 0.020, respectively. The EPR line width and intensity were found to be dependent on Sr²⁺ addition and temperature. However, the AFM–PM transition temperature was found to be independent of strontium concentration, being ca. 296 K. In the PM phase, g-factor was nearly temperature independent with increasing of x. The EPR results indicated that the addition of Sr²⁺ ions may induce creation of Cr³⁺–Cr⁴⁺ clusters.     

Crystal structure and electrical properties of new tungsten bronzes: BxWO3 (0.01 ≤ x ≤ 0.08)

Boron tungsten bronzes B_xWO₃ (0.01 ≤ x ≤ 0.08) were synthesized by hybrid microwave method from mixtures of WO₃ and amorphous boron powder. With the increase of boron content, the crystal structure of B_xWO₃ transforms from orthorhombic (x = 0.01) to tetragonal α (x = 0.048) and then to tetragonal β (0.07 ≤ x ≤ 0.08). The average size of crystallites is in the range of 1-10 μm. All samples show semiconducting behaviour in their temperature dependence of resistivity. The conduction behaviour above 80 K for samples with x = 0.01 and 0.08 can be explained using the variable-range hopping and thermally activated mechanism, respectively. Comparative experiments showed that boron bronze phases cannot be obtained by the microwave heating of pure WO₃ powder or a mixture of B₂O₃ and WO₃ under the same conditions.     

Synthesis of perovskite-type (La1−xCax)FeO3 (0 ≤ x ≤ 0.2) at low temperature

Gel formation was realized by adding citric acid to a solution of La(NO₃)₃·5H₂O, Ca(NO₃)₂·4H₂O, and Fe(NO₃)₂·9H₂O. Perovskite-type (La_1−xCa_x)FeO₃ (0 ≤ x ≤ 0.2) was synthesized by firing the gel at 500 °C in air for 1 h. The crystallite size (D_1 2 1) decreased with increasing x, while the specific surface area was 6.8-9.4 m²/g and independent of x. The XPS measurement of the (La_1−xCa_x)FeO₃ surface indicated that the Ca²⁺ ion content increased with increasing x, while the Fe ion content was independent of x. Catalytic activity for CO oxidation increased with increasing x.     

Synthesis of spherical nanostructured LiMxMn2−xO4 (M = Ni, Co, and Ti; 0 ≤ x ≤ 0.2) via a single-step ultrasonic spray pyrolysis method and their high rate charge-discharge performances

LiM_xMn_2−xO₄ (M = Ni²⁺, Co³⁺, and Ti⁴⁺; 0 ≤ x ≤ 0.2) spinels were prepared via a single-step ultrasonic spray pyrolysis method. Comparative studies on powder properties and high rate charge-discharge electrochemical performances (from 1 to 15 C) were performed. XRD identified that pure spinel phase was obtained and M was successfully substituted for Mn in spinel lattice. SEM and TEM studies confirmed that powders had a feature of ‘spherical nanostructural’, that is, powders consisted of spherical secondary particles with the size of about 1 μm, which were developed from close-packed primary particles with several tens of nanometers. Substitutions enhanced density of second particles to different extents, depending on M and its content. Charge-discharge tests showed that as-prepared LiMn₂O₄ could deliver excellent rate performance (around 100 mAh/g at 10 C). Ni substitution contributed to improving electrochemical performances. In the voltage range of 4.95-3.5 V, the materials showed much better electrochemical performances than LiMn₂O₄ in terms of capacity, cycleability and rate capability.     

Oxygen vacancy ordering in strontium doped rare earth cobaltate perovskites Ln1−xSrxCoO3−δ (Ln = La, Pr and Nd; x > 0.60)

A family of Sr-doped perovskite compounds Ln_1−xSr_xCoO_3−δ (Ln = La³⁺, Pr³⁺ and Nd³⁺; x > 0.60), were prepared by sol-gel chemistry and reaction at 1100 °C under 1 atm of oxygen. This structural family has been shown to be present only for rare earth ions larger than Sm³⁺ and an upper limit of Sr²⁺ solubility in these phases was found to exist between x = 0.90 and 0.95. X-ray diffraction shows oxygen-deficient, simple cubic (Pm-3m) perovskite crystal structures. The combination of electron and powder neutron diffraction reveals that oxygen vacancy ordering occurs, leading to a tetragonal (P4/mmm) superstructure and a doubling of the basic perovskite unit along the crystallographic c-axis. No additional Ln³⁺/Sr²⁺ cation ordering was observed.     

Synthesis and luminescence properties of color-tunable Ba1−ySryLa4−xTbx(WO4)7 (x = 0.02-1.2, y = 0-0.4) phosphors

Ba_1−ySr_yLa_4−xTb_x(WO₄)₇ (x = 0.02-1.2, y = 0-0.4) phosphors were prepared via a solid-state reaction and their photoluminescence properties were investigated. An analysis of the decay behavior indicates that the energy migration between Tb³⁺ ions is conspicuous in the ⁵D₃ → ⁷F₄ transition due to the cross-relaxation in BaLa₄(WO₄)₇. A partial substitution of Ba²⁺ by Sr²⁺ can not only enhance the emission intensity but also increase the solid solubility of Tb³⁺ in Ba_1−ySr_yLa_4−xTb_x(WO₄)₇. The emission intensity of the ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions can be enhanced by increasing Sr²⁺ and Tb³⁺ concentrations, with the optimal conditions being x = 1.2, y = 0.4 (Ba_0.6Sr_0.4La_2.8Tb_1.2(WO₄)₇). Under near-UV excitation at 379 nm, the CIE color coordinates of Ba_1−ySr_yLa_4−xTb_x(WO₄)₇ vary from blue (0.212, 0.181) at x = 0.04, y = 0, to green (0.245, 0.607) at x = 1.2, y = 0.4.     

Eu-Mössbauer spectroscopic and X-ray diffraction study on EuyM1−yO2−x (0 ≤ y ≤ 1.0) (M = Th, U)

¹⁵¹Eu-Mössbauer spectroscopic and powder X-ray diffraction (XRD) study has been performed for the Eu_yM_1−yO_2−x (M = Th and U) systems over the entire composition range of 0 ≤ y ≤ 1.0. The XRD results of the Eu-Th system showed that a very wide defect-fluorite (DF) type phase in which oxygen vacancies (V_O) are disordered (x = y/2) is formed for 0 ≤ y < 0.5 and that two-phase regions sandwitching a narrow C-type (C) single phase around y ≈ 0.8 appear for 0.5 < y < 0.8 (DF + C) and 0.82 < y < 1.0 (C + B-type (monoclinic) Eu₂O₃). The Mössbauer results show that the isomer shifts (ISs) of Eu³⁺ in this system smoothly increase with Eu composition, y. The decrease of average coordination number (CN) of O²⁻ around Eu³⁺ with increasing y (CN = 8 − 2y) (x = y/2) results in the decrease of the average EuO bond length, which is due to the decrease of repulsion force between O²⁻ anions. This result confirms that the IS of Eu³⁺ correlates well with the average EuO bond length in oxide systems. For the Eu-U system, the lattice parameter, a₀, of the system decreases almost linearly with y, in accordance with the calculated a₀ versus y curve for the oxygen-stoichiometric (i.e. x = 0) fluorite-type dioxide (CN = 8). The ISs of Eu³⁺ in this composition range remain almost constant around 0.5 mm/s, which is comparable to those of pyrochlore oxides (Eu₂Zr₂O₇ and Eu₂Hf₂O₇ (y = 0.5)) with O²⁻-eight-fold coordinated Eu³⁺(CN = 8).     

Structural and magnetic properties of La0.85Ca0.15Mn1 − xCrxO3

Chromium (Cr) is doped at the Mn site of La_0.85Ca_0.15MnO₃ system to explore its complex ferromagnetic insulating (FMI) state. The Rietveld refinement of neutron diffraction data indicates that there is no structural change owing to Cr substitution in La_0.85Ca_0.15Mn_1 − xCr_xO₃ (0 ≤ x ≤ 0.1). Nevertheless, it strengthens the magnetic couplings and the system shifts towards enhanced ferromagnetic (FM) ordering. Doping with Cr is found to stabilise the FMI state at low temperatures. The magnetic moment of the parent compound (for x = 0) obtained from neutron diffraction data recorded at low temperature (17 K) is found to be ~ 3.53(5) μ_B and is close to the theoretically estimated value of 3.85 μ_B. This value is higher than previously reported value of 2.90 μ_B.     

Magnetocaloric properties in Ln0.67Ba0.33Mn1 − xFexO3 (Ln = La or Pr) manganites

We have investigated the magnetocaloric properties of Ln_0.67Ba_0.33Mn_1 − xFe_xO₃ (Ln = La or Pr) manganites with x = 0 and 0.05. All compounds present a maximum and large magnetocaloric effect near the Curie temperature (T_C). The associated maximum value of the magnetic entropy change, at 5 T applied change in the magnetic field, is 4.37 J.kg^− 1.K^− 1 for Pr_0.67Ba_0.33MnO₃ manganite with a T_C value of 205 K. The corresponding relative cooling power (RCP) reaches 230 J.kg^− 1. All the samples present similar RCP values that are relatively high and are promising materials to be used in ecologically friendly magnetic refrigeration technology. Iron doping reduces both T_C and ΔS_M^max and spreads the temperature working range with an almost constant RCP and can then be used to tune the working conditions of a refrigerator device.