Photoconductive properties of organic-inorganic hybrid perovskite (C6H13NH3)2(CH3NH3)m − 1PbmI3m + 1:TiO2 nanocomposites device structure

Photoconductive devices, with remarkable photoconductive performance, of fluorine doped tin oxide/TiO₂/(C₆H₁₃NH₃)₂(CH₃NH₃)_m − 1Pb_mI_3m + 1 (m = 1, 2):TiO₂/Pt were fabricated. An electron injection mechanism from the (C₆H₁₃NH₃)₂(CH₃NH₃)_m − 1Pb_mI_3m + 1 (m = 1, 2) to TiO₂ was proposed for the photoconductive effects, where organic-inorganic hybrid perovskite (C₆H₁₃NH₃)₂(CH₃NH₃)_m − 1Pb_mI_3m + 1 (m = 1, 2), self-organized into mesoscopic TiO₂ films from solution directly, served as the electron donor. The photoconductive performance of the devices can be adjusted by the inorganic sheet thickness (tuned by m) of the hybrid perovskite. The photocurrent value increased as m value increased at the same illumination. Further, when bias voltage was 1.0 V, the ratio of photocurrent and dark current for (C₆H₁₃NH₃)₂(CH₃NH₃)_2⁻ Pb₂I₇:TiO₂ reached as high as 7.05 × 10³. The devices could be potentially used as light detectors and light-controlled switch.     

Effect of ZrO2 addition on crystallization behaviour, porosity and chemical-mechanical properties of a CaO-TiO2-P2O5 microporous glass ceramic

2-6 mol% ZrO₂ was added to a base glass composition of P₂O₅ 31.25, CaO 43.75, TiO₂ 25 (mol%) at the expense of TiO₂. The prepared glasses were crystallized to bulk glass ceramics containing the major phases of β-Ca₃(PO₄)₂ and CaTi₄(PO₄)₆. DTA was utilized to determine the appropriate phase separation-nucleation and crystallization temperatures. The crystalline products and resulting microstructures were examined by XRD and SEM. The β-Ca₃(PO₄)₂ phase was dissolved out by leaching the resulting glass ceramics in HCl, leaving a porous skeleton of CaTi₄(PO₄)₆. It was shown that ZrO₂ addition resulted in reduction of volume porosity and mean pore diameter while the specific surface area was increased. The smallest median pore diameter and largest surface area were 8.6 nm and 32 m² g⁻¹ respectively obtained for the specimen containing 6 mol% ZrO₂. The ZrO₂ addition also improved the chemical durability and bending strength of porous glass ceramics.     

Electrical properties of Pb(Mg1/3Nb2/3)O3-PbTiO3 ceramics modified with WO3

Ferroelectrics 0.67Pb (Mg_1/3Nb_2/3)O₃-0.33PbTiO₃ (PMN-PT) + x mol% WO₃ (x=0.1, 0.5, 1, 2) were prepared by columbite precursor method. Electrical properties of WO₃-modified ferroelectrics were investigated. X-ray diffraction (XRD) was used to identify crystal structure, and pyrochlore phase were observed in 0.67Pb (Mg_1/3Nb_2/3)O₃-0.33PbTiO₃+2 mol% WO₃. Dielectric peak temperature decreased with WO₃ doping, indicating that W⁶⁺ incorporated into PMN-PT lattice. Lattice constant, pyrochlore phase and grain size contribute to the variation of K_max. Both piezoelectric constant (d₃₃) and electromechanical coupling factors (k_p) were enhanced by doping 0.1 mol% WO₃, which results from the introduction of “soft” characteristics into PMN-PT, while further WO₃ addition was detrimental. We consider that the two factors, introduction of “soft” characteristics and the formation of pyrochlore phase, appear to act together to cause the variation of piezoelectric properties of 0.67PMN-0.33PT ceramics doping with WO₃.     

[NH3(CH2)2NH3][Co(SO4)2(H2O)4]: Chemical preparation, crystal structure, thermal decomposition and magnetic properties

Cobalt ethylenediammonium bis(sulfate) tetrahydrate, [NH₃(CH₂)₂NH₃][Co(SO₄)₂(H₂O)₄], has been synthesised by slow evaporation at room temperature. It crystallises in the triclinic system, space group , with the unit cell parameters: a = 6.8033(2), b = 7.0705(2), c = 7.2192(3) Å, α = 74.909(2)°, β = 72.291(2)°, γ = 79.167(2)°, Z = 1 and V = 317.16(2) Å³. The Co(II) atom is octahedrally coordinated by four water molecules and two sulfate tetrahedra leading to trimeric units [Co(SO₄)₂(H₂O)₄]. These units are linked to each other and to the ethylenediammonium cations through OW-H…O and N-H…O hydrogen bonds, respectively. The zero-dimensional structure is described as an alternation between cationic and anionic layers along the crystallographic b-axis. The dehydration of the precursor proceeds through three stages leading to crystalline intermediary hydrate phases and an anhydrous compound. The magnetic measurements show that the title compound is predominantly paramagnetic with weak antiferromagnetic interactions.     

Synthesis, crystal structure and infrared study of LiEr(PO3)4

A single-crystal X-ray diffraction analysis has been performed on LiEr(PO₃)₄ prepared by the flux method. The compound crystallizes in the monoclinic system with space group C2/c and cell parameters: a = 16.262(2), b = 7.032(1), c = 9.549(2) Å and β = 125.95(1)°. The crystal structure was refined based on 1272 independent reflections with I > 2σ(I). Final values of the reliability factors were improven considerably: R(F²) = 0.0180 and wR(F²) = 0.0490. The LiEr(PO₃)₄ structure is characterized by infinite chains (PO₃)_n, extending parallel to the b direction. The ErO₈ dodecahedra and LiO₄ tetrahedra alternate on two-fold axes in the middle of four (PO₃)_n chains. The vibrational study by infrared absorption spectroscopy is reported.     

Luminescent properties of Eu-activated nanophosphors Ca3Y0.8Gd0.2(VO4)2.4(PO4)0.6: Eu for light-emitting diodes

Eu³⁺-doped Ca₃Y_0.8Gd_0.2(VO₄)_2.4(PO₄)_0.6 nanophosphors have been prepared by modified solid-state reaction. X-ray powder diffraction, transmission electron microscopy (TEM), photoluminescence excitation and emission spectra were used to characterize the resulting samples. X-ray powder diffraction (XRD) analysis confirmed the formation of YVO₄. Photoluminescence (PL) results showed that the phosphor could be efficiently excited by UV-visible light from 350 to 550 nm, exhibiting bright orange-red emission(excited by 397) and red emission(excited by 467), which has potential application as a phosphor for UV and blue GaN-based light-emitting diodes (LEDs). TEM images show that the grain size of Ca₃Y_0.45Eu_0.35Gd_0.2(VO₄)_2.4(PO₄)_0.6 is about 39 nm, which is in full agreement with the theoretical calculation data from the XRD patterns.     

Preparation, structure and luminescent properties of a new potassium yttrium borate K3Y3(BO3)4

A new yttrium borate compound K₃Y₃(BO₃)₄ has been obtained in the K₂O-Y₂O₃-B₂O₃ ternary system. Its structure, determined from single crystal X-ray diffraction data, shows that it belongs to space group P2₁/c with unit cell dimensions of a = 10.4667(16) Å, b = 17.361(3) Å, c = 13.781(2) Å and β = 110.548(8)°. The structure consists sheets of [Y₈B₈O₂₄]_∞ linked by out of sheet BO₃ groups and Y ions to form a three-dimensional framework. The luminescent properties of Eu³⁺ and Tb³⁺ doped K₃Y₃(BO₃)₄ materials have also been studied.     

Crystal and magnetic study of the disordered perovskites Ca(Mn0.5Sb0.5)O3 and Ca(Fe0.5Sb0.5)O3

We have investigated the double perovskites Ca₂MSbO₆ (M = Mn, Fe) that have been prepared by solid-state reaction (M = Fe) and wet chemistry procedures (M = Mn). The crystal and magnetic structures have been studied from X-ray (XRD) and neutron powder diffraction (NPD) data. Rietveld refinements show that the crystal structures are orthorhombic (space group Pbnm) with complete disorder of M and Sb cations, so the formula should be rewritten as Ca(M_0.5Sb_0.5)O₃. Due to this disorder no evidences of Jahn-Teller distortion can be observed in the MnO₆ octahedra of Ca(Mn_0.5Sb_0.5)O₃, in contrast with the ordered double perovskite Sr₂MnSbO₆. Ca(Fe_0.5Sb_0.5)O₃ behaves as an antiferromagnet with an ordered magnetic moment for Fe³⁺ of 1.53(4)μ_B and a propagation vector k = 0, as investigated by low-temperature NPD. The antiferromagnetic ordering is a result of the high degree of Fe/Sb anti-site disorder of the sample, which originates the spontaneous formation of Fe-rich islands, characterized by the presence of strong Fe-O-Fe antiferromagnetic couplings with enough long-range coherence to produce a magnetic contribution perceptible by NPD. By contrast, the magnetic structure of Ca(Mn_0.5Sb_0.5)O₃ cannot be observed by low-temperature NPD because the magnitude of the ordered magnetic moments is below the detection threshold for neutrons.     

Luminescence and microstructures of Eu-doped in triple phosphate Ca8MgR(PO4)7 (R = La, Gd, Y) with whitlockite structure

Eu³⁺-doped triple phosphate Ca₈MgR(PO₄)₇ (R = La, Gd, Y) was synthesized by the general high temperature solid-state reaction. This phosphor was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and emission spectra. XRD and FT-IR analysis indicated that Ca₈MgR(PO₄)₇ (R = La, Gd, Y) crystallized in single-phase component with whitlockite-like structure (space group R3c) of β-Ca₃(PO₄)₂. Under the excitation of UV light, the phosphors show bright red emission assigned to the transition (⁵D₀ → ⁷F₂) at 612 nm. The crystallographic sites of Eu³⁺ ions in Ca₈MgR(PO₄)₇ (R = La, Gd, Y) host were discussed on the base of site-selective excitation and emission spectra, luminescence decay and its host crystal structure.     

M2Y8(SiO4)6O2: Tb (M = Ca, Sr) phosphors: Sol-gel synthesis from N-2-aminoethylic-3-aminopropyldiethoxysilane and different photoluminescence behavior

M₂Y₈(SiO₄)₆O₂: Tb³⁺ (M = Ca, Sr) phosphors have been synthesized with a new silicon source silane crosslinking reagent (N-2-aminoethylic-3-aminopropyldiethoxysilane [NH₂(CH₂)₂NH(CH₂)₃SiCH₃(OCH₃)₂], abbreviated as AEAPMMS) through the sol-gel process, both of which present the characteristic emission ⁵D₄ → ⁷F_J (J = 6, 5, 4, 3) of Tb³⁺ ions. It is interesting to be found that the high energy level blue emission (⁵D₃ → ⁷F_J (J = 6, 5, 4, 3) transition) still can be found in the emission spectrum of Ca₂Y₈(SiO₄)₆O₂: Tb³⁺ while it disappears in the emission spectrum of Sr₂Y₈(SiO₄)₆O₂: Tb³⁺ for the cross-relaxation-induced quenching.     

Reinvestigation of the binary diagram Na3PO4-FePO4 and crystal structure of a new iron phosphate Na3Fe3(PO4)4

A new iron(III) phosphate Na₃Fe₃(PO₄)₄ has been synthesized and characterized. It decomposes before melting at 860°C into FePO₄ and Na₃Fe₂(PO₄)₃. The structure of the compound was determined by single-crystal X-ray diffraction. The unit cell is monoclinic with the following parameters: a=19.601(8) Å, b=6.387(1) Å, c=10.575(6) Å and β=91.81(4)°; Z=4; space group: C2/c. Na₃Fe₃(PO₄)₄ exhibits a layered structure involving corner-linkage between FeO₆ octahedra, and corner- and edge-sharing between FeO₆ octahedra and PO₄ tetrahedra. The Na⁺ cations occupying the interlayer space are six- and seven-fold coordinated by oxygen atoms. The relationship between the structure of Na₃Fe₃(PO₄)₄ and the previous reported hydrate K₃Fe₃(PO₄)₄·H₂O will be discussed.     

Synthesis and photoluminescence properties of a new red emitting phosphor: Ca3(VO4)2:Eu; Mn

A new red emitting phosphor, Ca₃(VO₄)₂:Eu³⁺; Mn²⁺, was synthesized by a citric acid sol-gel combustion method and characterized by XRD, TEM and photoluminescence (PL) spectra. The red emission located at about 613 nm was ascribed to ⁵D₀-⁷F₂ transition of Eu³⁺. And the red luminescence intensity changed with annealing temperature and concentration of Eu³⁺. The effect of the co-doped Mn²⁺ was also investigated systematically.     

Ion exchange and electrochemical evaluation of the microporous phosphate Li9Fe7(PO4)10

A new lithium iron(III) phosphate, Li₉Fe₇(PO₄)₁₀, has been synthesized and is currently under electrochemical evaluation as an anode material for rechargeable lithium-ion battery applications. The sample was prepared via the ion exchange reaction of Cs₅K₄Fe₇(PO₄)₁₀1 in the 1 M LiNO₃ solution under hydrothermal conditions at 200 °C. The fully Li⁺-exchanged sample Li₉Fe₇(PO₄)₁₀2 cannot yet be synthesized by conventional high-temperature, solid-state methods. The parent compound 1 is a member of the Cs_9−xK_xFe₇(PO₄)₁₀ series that was previously isolated from a high-temperature (750 °C) reaction employing the eutectic CsCl/KCl molten salt. The polycrystalline solid 1 was first prepared in a stoichiometric reaction via conventional solid-state method then followed by ion exchange giving rise to 2. Both compounds adopt three-dimensional structures that consist of orthogonally interconnected channels where electropositive ions reside. It has been demonstrated that the Cs_9−xK_xFe₇(PO₄)₁₀ series possesses versatile ion exchange capabilities with all the monovalent alkali metal and silver cations due to its facile pathways for ion transport. 1 and 2 were subject to electrochemical analysis and preliminary results suggest that the latter can be considered as an anode material. Electrochemical results indicate that Li₉Fe₇(PO₄)₁₀ is reduced below 1 V (vs. Li) to most likely form a Fe(0)/Li₃PO₄ composite material, which can subsequently be cycled reversibly at relatively low potential. An initial capacity of 250 mAh/g was measured, which is equivalent to the insertion of thirteen Li atoms per Li_9+xFe₇(PO₄)₁₀ (x = 13) during the charge/discharge process (Fe²⁺ + 2e → Fe⁰). Furthermore, 2 shows a lower reduction potential (0.9 V), by approximately 200 mV, and much better electrochemical reversibility than iron(III) phosphate, FePO₄, highlighting the value of improving the ionic conductivity of the sample.     

IF-WS2 nanoparticles size design and synthesis via chemical reduction

An innovative synthesis of inorganic fullerene-like disulfide tungsten (IF-WS₂) nanoparticles was developed using a chemical reduction reaction in a horizontal quartz reactor. In this process, first tungsten trisulfide (WS₃) was formed via a chemical reaction of tetra thiotungstate ammonium ((NH₄)₂WS₄), polyethylene glycol (PEG), and hydrochloric acid (HCl) at ambient temperature and pressure. Subsequently, WS₃ was reacted with hydrogen (H₂) at high temperature (1173-1373 K) in a quartz tube. The produced WS₂ nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDAX), and transmission electron microscopy (TEM). The characterization results indicated that the high-purity (100%) IF-WS₂ nanoparticles were produced. Moreover, addition of surfactant (PEG) and higher operating temperature (1173-1373 K) decreased the particles agglomeration, and consequently led to the reduction of average diameter of WS₂ particles in the range of 50-78 nm. The developed method is simple, environmentally compatible, and cost-effective in contrast to the conventional techniques.     

Synthesis and upconversion luminescence properties of Yb/Er codoped BaGd2(MoO4)4 powder

Synthesis and upconversion luminescence properties of the new BaGd₂(MoO₄)₄:Yb³⁺,Er³⁺ phosphor were reported in this paper. The phosphor powder was obtained by the traditional high temperature solid-state method, and its phase structure was characterized by the XRD pattern. Based on the upconversion luminescence properties studies, it is found that, under 980 nm semiconductor laser excitation, BaGd₂(MoO₄)₄:Yb³⁺,Er³⁺ phosphor exhibits intense green upconversion luminescence, which is ascribed to ²H_11/2 → ⁴I_15/2 and ⁴S_3/2 → ⁴I_15/2 transition of Er³⁺. While the observed much weaker red emission is due to the non-radiative relaxation process of ⁴S_3/2 → ⁴F_9/2 and ⁴F_9/2 → ⁴I_15/2 transition originating from the same Er³⁺. The concentration quenching effects for both Yb³⁺ and Er³⁺ were found, and the optimum doping concentrations of 0.5 mol% Yb³⁺ and 0.08 mol% Er³⁺ in the new BaGd₂(MoO₄)₄ Gd³⁺ host were established.     

Synthesis and crystal structure of triphosphate RbPrHP3O10

Crystals of RbPrHP₃O₁₀ have been grown by the flux technique and characterized by single-crystal X-ray diffraction. RbPrHP₃O₁₀ crystallizes in the triclinic space group with lattice parameters: a = 7.0655(5), b = 7.7791(4), c = 8.6828(6) Å, α = 74.074(3), β = 74.270(3), γ = 82.865(2)°, V = 441.09(5) ų, Z = 2. The crystal structure has been solved yielding a final R(F²) = 0.0443 and R_w(F²) = 0.1426 for 1955 independent reflections (F_o² ≥ 2σ(F_o²)). The structure of RbPrHP₃O₁₀ consists of PrO₈ polyhedra and P₃O₁₀⁵⁻ groups sharing oxygen atoms to form a two-dimensional framework; the PrO₈ polyhedra form infinite chains by edge-sharing. Each Rb⁺ ion is bonded to 10 oxygen atoms, these ions are located between chains formed of (HP₃O₁₀)⁴⁻. The energies of the vibrational modes of the crystal were obtained from measurements of the infrared spectrum.     

Vacuum ultraviolet excited photoluminescence properties of novel Na3Y9O3(BO3)8:Eu phosphor

The novel vacuum ultraviolet (VUV) excited Na₃Y₉O₃(BO₃)₈:Eu³⁺ red phosphor was synthesized and the photoluminescence (PL) properties were investigated. The phosphor showed strong VUV PL intensity, large quenching concentration (40 mol%) and good chromaticity (0.649, 0.351). The Eu³⁺-O²⁻ charge transition (CT) was observed to be at a higher energy (232 nm, 5.35 eV). The host absorption at 127-166 nm was broad and strong when monitoring the Eu³⁺ emission, which indicated that energy transfer from the host-lattice to the Eu³⁺ ions was efficient in Na₃Y₉O₃(BO₃)₈:Eu³⁺. These excellent VUV PL properties were revealed to be correlated with the unique isolated layer-type structure of Na₃Y₉O₃(BO₃)₈ host. The results showed that the Na₃Y₉O₃(BO₃)₈:Eu³⁺ would be a good candidate for VUV-excited red phosphor.     

Syntheses and structures of Ta2(WO2)0.87H0.26(PO4)4 and Ta2(MoO2)(PO4)4

Tantalum hydrogen phosphate, β-TaH(PO₄)₂, has a three-dimensional structure that is stable to remarkably high temperature (∼600 °C) presumably due to the presence of strong hydrogen bonds. Impedance measurements indicate a low conductivity, 2.0 × 10⁻⁶ S/cm at 200 °C in 5% H₂. In further studies aimed at enhancing the conductivity by aliovalent doping, we have investigated systematically the synthesis of compounds in the TaH(PO₄)₂-W₂P₂O₁₁ system at 380 °C. As a result, a new phase, Ta₂(WO₂)_0.87H_0.26(PO₄)₄, was identified and subsequently the molybdenum analog Ta₂(MoO₂)(PO₄)₄ was also prepared. The structures were determined by single crystal X-ray diffraction techniques. The structures of Ta₂(WO₂)_0.87H_0.26(PO₄)₄ and Ta₂(MoO₂)(PO₄)₄ can be formally derived from the structure of β-TaH(PO₄)₂ by the replacement of two P-OH protons with an MO₂²⁺ (M = Mo and W) group together with a change in the orientation of some phosphate tetrahedra.     

Synthesis and characterization of a new monophosphate (5-Cl-2,4-(OCH3)2C6H2NH3)H2PO4

Chemical preparation, crystal structure and NMR spectroscopy of a new organic cation 5-chloro(2,4-dimethoxy)anilinium monophosphate H₂PO₄ are given. This new compound crystallizes in the monoclinic system, with the space group P2₁/c and the following parameters: a = 5.524(2) Å, b = 9.303(2) Å, c = 23.388(2) Å, β = 90.66(4), V = 1201.8(2) Å³, Z = 4 and D_x = 1.573 g cm⁻³. Crystal structure has been determined and refined to R = 0.031 and R_w = 0.080 using 1702 independent reflections. Structure can be described as an infinite (H₂PO₄)_nⁿ⁻ corrugated chains in the a-direction. The organic groups (5-Cl-2,4-(OCH₃)₂C₆H₂NH₃)⁺ are anchored between adjacent polyanions through multiple hydrogen bonds. This compound is also investigated by IR, thermal, and solid-state, ¹³C, ³¹P MAS NMR spectroscopies.     

Crystal growth and spectral properties of Pr:La2(WO4)3

Pr³⁺-doped La₂(WO₄)₃ single crystal with dimensions up to Ø 20 mm × 35 mm has been grown by the Czochralski method. The structure of the Pr³⁺:La₂(WO₄)₃ crystal was determined by the X-ray powder diffraction and the Pr³⁺ concentration in this crystal was determined. The absorption and fluorescence spectra of Pr³⁺:La₂(WO₄)₃ crystal were measured at room temperature, and the fluorescence lifetime of main emission multiplets were estimated from the recorded decay curves. The spectral properties related to laser performance of the crystal were evaluated.