共查询到19条相似文献,搜索用时 93 毫秒
1.
塑料自然老化与人工老化之间的相关性(二) 总被引:2,自引:1,他引:1
曾漓强 《合成材料老化与应用》1985,(2)
三、塑料户外使用寿命的预测及人工老化与大气老化之间的相关性。通过人工气候试验寻求人工老化与大气老化试验结果之间的相关性,以期用人工气候试验在较短时间内能够预测塑料材料在户外环境的使用寿命,是一个非常活跃的研究领域,国外为解决这一课题,致力于发展各种老化试验方法及测试技术.同时强调如何利 相似文献
2.
3.
《合成材料老化与应用》1973,(2)
评价ABS塑料户外老化的一种快速的实验室方法,包含测量曝露在3650A光波下薄膜的吸氧。用这种方法试验2天就可以发现户外老化期间劣质的ABS化合物。含有充分的碳黑作为足够的光屏蔽的化合物,大致曝露85天才变坏。以机械性能的变化评价加速方法与长期户外老化是相一致的。 相似文献
4.
通过红外光谱、色差和力学性能等研究了丙烯腈–丁二烯–苯乙烯塑料(ABS)在人工加速老化试验(UVA,UVB和氙灯)及户外自然老化试验过程中老化行为的相关性。红外分析结果表明,不同ABS材料在人工加速老化和自然老化过程中遵循相同的光氧老化动力学,但不同光源对ABS材料的加速老化作用有明显差别;色差分析结果表明,人工加速老化试验对色差变化的加速倍率由大到小顺序为:UVBUVA氙灯。通过分析ABS材料的色差及力学性能在人工加速老化与户外自然老化过程中变化的相关性,拟合了人工加速老化与户外自然老化的时间换算方程。 相似文献
5.
《合成材料老化与应用》1972,(2)
(此文报导了美国在塑料耐候性方面的一些工作,列出一些塑料在户外使用的情况及使用的年限。现将有关部分,简要摘译于下,仅供参考) 防止大气老化,特别是防止光老化,可加入“光屏蔽剂”,紫外线吸收剂及稳定 相似文献
6.
利用平板式氙灯试验箱,对低密度聚乙烯(LDPE)吹塑罩袋进行氙灯老化测试,发现有关低密度聚乙烯罩袋在抗光老化性能方面的一些规律。结合最小偏差原理等统计学方法,由低密度聚乙烯罩袋的较短时间的氙灯老化测试数据即可推算其在户外一年自然气候曝露的性能。该方法置信度高,且方便、快捷,可作为推算高分子聚合材料在户外抗老化性能的理论依据。应用于塑料配方的筛选,可降低长期人工老化的成本、结果再现性好。 相似文献
7.
8.
9.
人工光源光谱相对能量分布的测定 总被引:1,自引:1,他引:0
前言高分子材料如塑料、橡胶、涂料、纤维等在户外使用时爱大气诸因素的影响而发生老化,尤以太阳光中的紫外辐射能量是使材料老化的主要因素,达到地球表面的太阳辐射能中,紫外线约占总辐射的4~5%。人们为了研究材料的老化,寻求加速老化的试验方法,曾研制了各种人工光源和人 相似文献
10.
11.
12.
分析影响聚氯乙烯(PVC)塑窗耐候性的内因和外因,指出内因是PVC分子结构中出现的不规则连接、不饱和双键、支链等,外因主要是环境因素,即光、热、氧产生的老化,以及湿度的影响,并从冲击改性剂、稳定剂、着色剂、紫外线吸收剂及抗氧剂的选择方面提出了防止PVC塑窗老化的措施。 相似文献
13.
几种塑料材料的老化试验研究 总被引:2,自引:0,他引:2
考察和分析了6种塑料材料在我国西部自然环境条件下的老化性能和规律,分析和比较了6种塑料材料在拉萨和敦煌两种不同气候条件下的老化性能;并根据不同的试验标准进行了两种人工气候老化试验,比较了这两种方法与自然气候暴露试验结果的相关性。结果表明,不适当的人工气候老化试验方法有可能导致材料失效机理的失真,因此选用材料时必须慎重。 相似文献
14.
15.
16.
Recent strength results from GRC materials exposed over 5 to 6 years in hot climates confirm, in real weathering conditions, the levelling of strength previously predicted from accelerated ageing tests. 相似文献
17.
介绍光致发光塑料的配方和注塑成型条件,研究了产品加速老化和自然老化性能。结果表明助剂的品种和用量对亮度的影响显著,经加速老化5000h和自然老化12-22月后,各项技术指标同进口产品比较,结果基本接近,产品的寿命在广州地区为2-3a,在其他地区为3-5a,在室内可达6-10a。 相似文献
18.
Currently, there is a growing interest in the application of silicon-based technologies for the development of advanced hybrid organic–inorganic coatings with strong weatherability. In this study, the sol–gel process is used to prepare such coatings on glass and their resistance to weathering effects is assessed afterwards. Various sols were prepared by mixing a silica-based inorganic matrix (tetraethyl orthosilicate) with different quantities of silica alkoxides functionalised with various organic groups. Subsequently, the sols were dip-coated onto glass samples at low temperatures without any heat treatment. The coatings prepared were analysed before and after three model ageing tests simulating various weathering parameters. After ageing, the best performing coatings showed good overall homogeneity and transparency (optical microscopy, SEM), improved water repellency and adhesion to the glass substrate (static contact angle measurements, cross-cut tape tests) and no colour or chemical composition changes (UV–VIS, FTIR). Compared with commercial hybrid silica products, the alkyl- and methacryloxy-functionalised silica coatings particularly displayed improved homogeneity, elasticity and barrier properties. Thus, these low temperature coatings, easily applicable to thin films, appear to fulfil the main requirements for the protection of the glass exposed to weathering phenomena. 相似文献
19.
The natural weathering of electrophoretic coatings exposed to continental weather in Trento (Italy) for about one year was considered. The environmental factors (such as wet time, temperature, and r.h.) affecting the properties of the organic coatings were monitored and investigated to ensure a consistent comparison between the laboratory results and the real weathering of the materials. The properties of the coatings were evaluated also after different laboratory tests using mainly EIS. The effects of the accelerated ageing were compared to the results of the outdoor exposure to get some insight into the understanding of the correlation between indoor and outdoor exposure. 相似文献