Study of Critical Current and <Emphasis Type="Italic">n</Emphasis>-Values of 2G HTS Tapes: Their Magnetic Field-Angular Dependence

Since many applications of YBCO tapes operate in external magnetic fields, it is necessary to investigate the magneto-angular dependence of critical current and n-values in coated conductors. In this paper, five commercial YBCO tapes with different microstructures produced by three different manufacturers are chosen. The selected samples have a width of 2.0, 4.0, 4.8, 6.0 or 12 mm, with copper, brass or stainless steel laminations. The critical current density dependence J_c(B, θ) and n-values characteristics n(B, θ) of the tapes are comprehensively measured under various magnetic fields and orientations. Afterwards, the obtained experimental data sets are successfully fitted using a novel multi-objective model which considers the material anisotropy. By using this approach, a fitting function I_c(B, θ) can always be obtained to accurately describe the experimental data, regardless of the fabrication and width differences of the superconducting tapes. Moreover, our experiment shows that when subject to different external magnetic fields, the angular dependence of n-values characteristics is directly correlated with the corresponding critical current profiles. Our results are helpful to predict the critical current of electromagnetically interacting 2G HTS wires, thereby improving the design and performance of the devices made from YBCO tapes.     

Angular-Dependent Vortex Pinning Properties of YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−<Emphasis Type="Italic">δ</Emphasis></Subscript>/Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Quasi-Multilayers

A series of quasi-multilayers of YBa₂Cu₃O_7?δ (YBCO)/Y₂O₃ specifically 70 × (m YBCO/n Y₂O₃) were prepared on SrTiO₃ single crystal using pulsed-laser deposition (PLD) with a controlled deposition pulses of m = 40 and n = 2, 5, and 10 for YBCO and Y₂O₃, respectively. The x-ray diffraction patterns indicate that all the present quasi-multilayers exhibit good c-axis orientation. The angular dependence of critical current density (J _c ) on applied magnetic field directions are systemically measured to study the anisotropic vortex pinning performances for those quasi-multilayers. It is revealed that compared with the pure YBCO films, the quasi-multilayers with n = 2, i.e., a proper constituent pulse of Y₂O₃, exhibits the enhanced vortex pinning abilities in all angles between c-axis orientation and the applied magnetic field direction. As well, such a quasi-multilayer film (n = 2) shows the higher lift factor J _c (Θ)/ J _c (90°) and much better vortex pinning properties at high fields and high temperatures, showing promising potential for coated conductor application.     

Magnetic Susceptibility and High Field Magneto-transport of Silver-Added Bi-2223 Superconductor: a Revisit

The effect of Ag addition on weak link behaviour of a Bi-2223 (Bi_1.7Pb_0.3Sr₂Ca₂Cu₃O₁₀) polycrystalline sample has been investigated in terms of AC susceptibility, critical current density (J _c), electrical resistivity ρ(T)H and upper critical field (H _c2). A series of phase pure Bi-2223-Ag _x (x = 0.0–0.3) samples are prepared by the solid-state synthesis route. The phase purity, crystal structures and surface morphology are being studied using the X-ray diffraction and scanning electron microscopy (SEM) technique, respectively. The effect of Ag addition on inter- and intragranular coupling has been investigated by means of AC susceptibility and magneto-transport ρ(T)H measurements, and the results are compared with the pure Bi-2223 sample. Enhancement in granular coupling between the grains of the 20 wt% Ag-added Bi-2223 sample has been witnessed. Critical current density (J _c) has been estimated using the AC susceptibility technique, and the results are interpreted in terms of inter- and intragranular coupling of the investigated samples. The high field magneto-transport technique has been used to estimate the upper critical field (H _c2) and thermally activation flux flow (TAFF) activation energy. The ensuing results revealed that H _c2 increases for the 20 wt% Ag-added sample along with enhancement in grain alignment and intergrain connectivity.     

Study of YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−<Emphasis Type="Italic">δ</Emphasis></Subscript> Superconductor/Graphene Oxide Composite

The aim of this research was to fabricate YBa₂Cu₃O_7?δ (YBCO) superconductor composite with graphene oxide nanosheets and to study the effect of the graphene oxide nanosheets on YBCO superconductor properties. For this purpose, the samples of pure superconductor and superconductor composite with 0.001, 0.01, and 0.1 wt.% graphene oxide were synthesized. First, graphite oxide was made by Hummer’s chemical method; after that, graphene oxide nanosheets were produced by bath-keeper ultrasonic. Then, different amounts of graphene oxide were added to the process of superconductor fabrication, which was made by solid-state reaction method. The samples were characterized and studied by Meissner effect test, XRD analysis, FESEM imaging, EDX measurement, and ac magnetic susceptibility. The critical current density (J_c) of samples was measured by four probes method. The results showed that by increasing the weight ratio of graphene oxide, J_c and T_c decrease.     

Investigation on the Current Transport Characteristics of SrTiO<Subscript>3</Subscript>/YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−x</Subscript> Heterostructure

By the combined use of the sol-gel and pulsed laser deposition methods, the SrTiO₃/YBa₂Cu₃O_7?x (STO/YBCO) heterostructure was prepared on a LaAlO₃ substrate. XRD results and φ scanning test showed that the prepared STO/YBCO heterostructure had good biaxial texture. Moreover, a Pt electrode was sputtered on the STO/YBCO heterostructure to investigate the current density-voltage (J ? V) characteristic curves of STO/YBCO in the 50–300 K temperature range. The results showed that the STO/YBCO heterostructure had good rectifying characteristics. With an applied positive bias voltage smaller than 3.7 V, the current density of the STO/YBCO heterostructure decreased with the decrease of temperature; for higher voltages, on the contrary, the current density increased with the decrease of temperature. When the YBCO experienced superconducting transition, the turn-on voltage (V _t) changed suddenly due to the sudden opening of the superconducting energy gap of YBCO. The V _t variation obtained from the experiment was essentially consistent with the known value of the YBCO superconducting energy gap.     

Effect of Ba/Y Molar Ratio on Superconducting Properties of BaTiO<Subscript>3</Subscript>-Doped YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript><Emphasis Type="Italic">O</Emphasis><Subscript>7−<Emphasis Type="Italic">δ</Emphasis></Subscript> Films

YBa₂Cu₃ O _7?δ (YBCO) films with BaTiO₃ (BTO) nanostructures were prepared by using the precursor solutions with different cationic molar ratios of Y:Ba:Cu = 1.0:1.6–2.0:3.0 in the TFA-MOD process. These YBCO films were deposited on (00 l)-oriented LaAlO₃ single-crystal substrates using a spin coater. The high superconducting critical current density (J _C) (77 K, self-filed) of more than 10 MA/cm² for the final BTO-doped YBCO film was obtained. Moreover, the effect of different Ba/Y molar ratios in the precursor solution on superconducting properties of BTO-doped YBCO films was investigated. Compared with the BTO-doped YBCO film deposited by using the precursor solutions with Ba/Y molar ratio of 2.0, an enhancement of J _C in a magnetic field for the film from the solution with Ba/Y molar ratio of 1.9 was achieved. For Ba/Y molar ratios of 1.6 and 1.7, a reduction of J _C in a magnetic field occurred. The J _C enhancement may be mainly ascribed to the enhanced flux pinning by the Y₂Cu₂ O ₅ nanostructures with the optimal number dispersing in YBCO matrix.     

Effect of Oxygen Pressure on the Surface Roughness and Intergranular Behavior of YBCO Thin Films

YBa₂Cu₃ O _7?δ (YBCO) thin films were deposited by pulsed laser deposition on single-crystal LaAlO₃ (100) substrates in O₂ partial pressure (P _O2) from 400 to 500 mTorr. The XRD data shows the presence of a-axis-oriented grains in the YBCO films deposited at P _O2 = 500 mTorr. The a-axis grains lead to increase of strain. Atomic force microscopy images show as oxygen pressure has increased, average surface roughness of the films and size of droplets were increased. The grain misorientaion could be the reason for high average roughness. However, surface analysis by statistical methods reveals that three surfaces have multi-affine structure irrespective of oxygen pressure. Analysis of the temperature dependence of the AC susceptibility near the transition temperature indicates that with increasing oxygen pressure, intergranular critical current density has decreased. It is also suggested that the nature of weak links in the samples is of superconductor-normal-superconductor (SNS) type irrespective of the oxygen pressure.     

AC Susceptibility and Superconducting Properties of Graphene Added YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−<Emphasis Type="Italic">d</Emphasis></Subscript>

The effect of graphene (G) addition on YBa₂Cu₃O_7?δ(G)_x (x =?0 ? 0.03 wt%) has been studied using the X-ray diffraction method, scanning electron microscopy, electrical resistance versus temperature, transport critical current density J_c, and AC susceptibility measurements. XRD patterns showed single-phase YBa₂Cu₃O_7?δ (YBCO) for all samples. SEM micrographs showed filling of the voids between YBa₂Cu₃O_7?δ grains as graphene was added. The temperature-dependent electrical resistance curves showed metallic normal state behavior and onset transition temperature T_conset between 90 and 92 K for all samples. AC susceptibility measurement showed transition temperature \(T_{\mathrm {c} \chi ^{\prime }}\) between 90 and 93 K. \(T_{\mathrm {c} \chi ^{\prime }}\) was maintained or improved slightly as graphene was added. The x =?0.001 wt% showed the highest J_c, i.e., 2750 A cm^?2 at 77 K and 5570 mA cm^?2 at 30 K which was 13 and 40 times higher than that of the non-added YBCO, respectively. The peak temperature T_p of the imaginary part of the susceptibility χ^″ was around 78–82 K for all samples indicating grain coupling was not weakened as graphene was added.     

Effect of Ag Addition on the Surface Topography and the Vibrational Dynamics of MgB<Subscript>2</Subscript>

We fabricated MgB₂ samples with Ag additions using in situ solid-state reaction via a single-step sintering to study the effect of Ag on the structural, vibration, and superconducting properties of MgB₂ samples. Ag addition to MgB₂ resulted in a significant improvement in J _c although no appreciable effect was observed in the lattice parameters and the superconducting transition temperature T _c. Dramatic increase in the grain size was observed with Ag addition and topographic measurements with atomic force microscopy revealed the formation of Ag–Mg nanoparticles 5–20 nm in size at 2 and 4 wt% Ag additions. The fact that these samples showed high J _c values suggests that the nanoparticles formed as a result of Ag addition are responsible for enhanced flux pinning. Raman spectroscopy measurements showed that Ag additions also increased disorder in the system and thereby affected the line width of the Raman active E _2g mode.     

Effect of CdTe Addition on the Electrical Properties and AC Susceptibility of YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7−<Emphasis Type="Italic">δ</Emphasis></Subscript> Superconductor

The effect of CdTe addition on YBa₂Cu₃O_7?δ (CdTe) _x (x = 0–0.10) has been studied. XRD patterns showed the presence of impurities including CdTe for x ≥ 0.05 wt%. The resistance versus temperature curves showed metallic behavior for all samples. The onset temperature T _{c onset} for all samples is between 90 and 92 K. The superconducting transition width, ΔT _c = 4 K for all samples except for x = 0.1 wt% where ΔT _c = 6 K. The superconducting transition determined by AC susceptibility measurement also showed little change in \(T_{\mathrm {c}\chi ^{\prime }}\) (between 89 and 92 K). However, the peak temperature T _p of the imaginary part of the susceptibility χ″, showed a drastic decrease for samples with x > 0.05 wt%. This indicated that the superconducting grains were strongly decoupled for x > 0.05 wt% due to the impurities as observed in the XRD pattern. The intergrain critical current density, J _c at T _p for the x = 0 sample is J _c (82 K) = 17 A cm^?2. These results can be useful in the fabrication of semiconductor/YBCO superconductor hybrid systems.     

Significant Correlations Between Levitation-Suspension Forces and Critical Current Densities in Bulk YBCO/Ag Composite Superconductors Fabricated by Infiltration and Growth Processing Technique

We report on significant correlations between the levitation-suspension forces and critical current densities in bulk YBCO/Ag composite superconductors fabricated by infiltration and growth processing (IGP) technique. Based on our studies, we have found that there is a strong correlation between various parameters obtained from levitation and suspension force curves and the magnetic J _cs calculated from M-H loops using the standard Bean’s model-type approaches. Significantly, the levitation force gap and the critical current density of the bulk sample are in direct correlation. We also find that it is possible to qualitatively predict the J _cs of samples from the levitation and suspension force curves by using this cost-effective measurement technique as a preliminary tool. These correlations provide a novel approach to rapid selection and characterization of bulk superconducting samples for their employment in practical applications.     

AC Losses in YBCO-Added Bi<Subscript>1.6</Subscript>Pb<Subscript>0.4</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript><Emphasis Type="Italic">δ</Emphasis></Subscript> Superconductors

The effect of YBCO adding on the superconducting of BPSCCO system with nominal starting composition of (Bi_1.6Pb_0.4Sr₂Ca₂Cu₃O _δ )_1?x(YBCO) _x with x = 0.00?0.10 was studied. The preparation methods used to prepare the samples are the conventional solid-state techniques. From the XRD data, it is observed that the percentage of the Bi-2223 phase increases and Bi-2212 decreases for addition x = 0.02–0.04, respectively. The effect of YBCO addition on the BPSCCO system also has been investigated in term of AC susceptibility study. We have studied the various applied field dependence of the AC susceptibility in polycrystalline samples. The AC susceptibility measurements in the range 0.05 to 2.00 Oe show that as the applied fields increases, the intergranular AC loss peaks move to lower temperature, and also height decreases and width increases. The effect of YBCO addition for the intergranular critical current J _cm, and the presence of weak links that coupled the superconducting grains were defined.     

The Effect of Using Different Y<Subscript>2</Subscript>O<Subscript>3</Subscript> Layers on the Activation Energy and Irreversibility Line of MPMG YBCO Bulk at 1050 °C Growth Temperature

In this study, three kinds of YBCO samples which are named Y1, Y2 and Y3 were fabricated by a melt–powder–melt–growth (MPMG) method. The Y1 sample was placed into a platinum (Pt) crucible without Y₂O₃, the Y2 sample was located on a Al₂O₃ crucible with a freely poured Y₂O₃ powder and the Y3 sample was located on a Al₂O₃ crucible with a 1-mm-thick buffer layer of Y₂O₃. YBCO samples were investigated by magnetoresistivity (ρ–T) measurements in dc magnetic fields (parallel to the c-axis) up to 5 T. The effect of the Y₂O₃ layer on the activation energy and irreversible flux of the samples was studied. The activation energies (U) were determined using the Arrhenius activation energy law from ρ–T. The power law relationship for U with H^?α was investigated. α was calculated to find out which defects were dominant in the samples. Irreversibility fields (H_irr) and upper critical fields (H_c2) were obtained using 10 and 90% criteria of the normal-state resistivity value from ρ–T curves. Irreversibility lines (ILs) were estimated from the equation H_irr ～ (1 ? T_irr(H)/T_irr(0))ⁿ. The fitting results to giant flux creep and vortex glass models were discussed.     

Tailoring of optical and electrical properties of PMMA by incorporation of Ag nanoparticles

Silver–poly(methyl methacrylate) (Ag–PMMA) nanocomposite films were prepared via ex situ chemical route by employing sodium borohydride (\(\hbox {NaBH}_{4}\)) as a reducing agent. In this study, PVP-stabilized Ag nanoparticles were prepared and mixed with PMMA solution. Optical and structural characterizations of resulting nanocomposite films were performed using UV–visible spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Characteristic surface plasmon resonance (SPR) peak of Ag nanoparticles was observed at about 3.04 eV (408 nm) in absorption spectra of Ag–PMMA nanocomposite films. TEM micrograph revealed that the spherical Ag nanoparticles with an average diameter of 5.4\(\,\pm \,\)2.5 nm are embedded in PMMA. In Raman spectra, besides shifting of vibrational bands, enhancement in intensity of Raman signal with incorporation of Ag nanoparticles was observed. Current (I)–voltage (V) measurements revealed that conductivity of PMMA increased with increasing concentration of Ag nanoparticles. Analysis of I–V data further disclosed that at voltage <2 V, ohmic conduction mechanism is the dominant mechanism, while at voltage >2 V Poole–Frenkel is the dominant conduction mechanism. Urbach’s energy, the measure of disorder, increased from 0.40 eV for PMMA to 1.11 eV for Ag–PMMA nanocomposite films containing 0.039 wt% of Ag nanoparticles.     

Study of the Magnetic Properties of Ni/Ag Superlattice

Thin multilayer films of alternating ultrathin Ni and Ag layers (L(Ni)=11,15,30 Å, bulk and \(L(\mathrm{Ag})=50~{\AA})\) have been prepared by evaporation in ultrahigh vacuum under controlled conditions and have been studied by the magnetic measurements. The critical temperature T _C is studied as a function of the surface exchange interaction (J _S). The dependence of T _C on the thickness L of the film has been investigated. A critical value of the surface exchange interaction in the film, above which the surface magnetism appears, is obtained. The shift of the critical temperature T _C(L) from the bulk value \([\frac{T_{\mathrm{C}}(\infty )}{T_{\mathrm{C}}(L)}-1]\) can be described by a power law L ^?λ , where \(\lambda =\frac{1}{\nu_{\mathrm{b}}}\) is the inverse of the correlation length’s exponent. The effective critical exponent associated with the magnetization M(β) is deduced for different thicknesses of Ni layers, and the thickness L(Ag) was being kept constant at 50 Å.     

Influence of silver addition on microstructures and transport properties of La<Subscript>0.67</Subscript>Ca<Subscript>0.33</Subscript>MnO<Subscript>3</Subscript>:Ag<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> composites

In order to obtain high temperature coefficient of resistance (TCR) value of La_0.67Ca_0.33MnO₃:Ag _x (LCMO:Ag _x ) composites, samples with different Ag contents (x?=?0, 0.1, 0.2, 0.25, 0.3, and 0.5) were prepared by sol–gel method. X-ray diffraction analyses indicated that all samples had orthorhombic perovskite structures. As x increased, lattice parameters (a, b, c) and cell volumes underwent slight expansions. Interestingly, the addition of Ag dramatically affected TCR and magneto-resistance (MR) values. Elevated TCR value up to 53.46%·K^?1 at 277 K was observed for LCMO:Ag _x composites with added Ag at the composition of x?=?0.1. Meanwhile, MR value at 263 K reached 71% at the magnetic field of 1 T for samples with Ag composition of x?=?0.25. The increase in Mn⁴⁺/Mn³⁺ ratio and improvement in crystallization caused by added Ag was found responsible for the elevated values of TCR, MR, and T_p. These findings may have practical use in high-performance magneto-resistive manganites.     

Magnetic and Electrical Properties Induced by the Substitution of Divalent by Monovalent in the La<Subscript>0.6</Subscript>Ca<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript> Compound

The La_0.6Ca_0.4?x Ag _x MnO₃ samples with x = 0 and 0.10 were prepared by sol–gel methods. Structural and electrical measurements were performed to examine the effect of the silver substitution in the calcium sites on the physical properties. Magnetization versus temperature studies have shown that all samples exhibit a magnetic transition from ferromagnetic to paramagnetic phase when temperature is increased. The second transition in the resistivity in the La_0.6Ca_0.4MnO₃ compound can be attributed to an abnormality characteristic of charge ordering (CO) effect. The electrical resistivity was described by a phenomenological percolation model. Ten percent of Ag substitution in the Ca site exhibits a magnetoresistance value about 75 % near room temperature at the applied magnetic field of 8 T.     

Structural,Optical and Multiferroic Properties of (Nd,Zn)-Co-doped BiFeO<Subscript>3</Subscript> Nanoparticles

The pure BiFeO₃ (BFO) and (Nd, Zn)-co-doped BFO nanoparticles were prepared by a sol-gel method. The crystal structure and optical and multiferroic properties of the samples were systematically investigated. Rietveld refinement showed that the samples crystallized in rhombohedral R3c structure. In UV-visible diffuse absorption spectra, an apparent blue shift can be observed after co-doping, which indicates a possible application in photocatalyst and photoconductive devices. Compared with a pure BFO sample, the leakage current density of the x = 0.05 sample decreases about 3 orders of magnitude. The remanent magnetization (M _r) of the x = 0.10 sample reaches 0.105 emu/g while the coercive field (H _c) is as high as 7.0 kOe. The (Nd, Zn) co-doping into BFO nanoparticles has been proved to be an effective way to improve the optical and multiferroic properties.     

Prediction of Magnetocaloric Effect by a Phenomenological Model and Critical Behavior for La<Subscript>0.78</Subscript>Dy<Subscript>0.02</Subscript>Ca<Subscript>0.2</Subscript>MnO<Subscript>3</Subscript> Compound

The La_0.78Dy_0.02Ca_0.2MnO₃ (LDCMO) compound prepared via high-energy ball-milling (BM) presents a ferromagnetic-to-paramagnetic transition (FM-PM) and undergoes a second-order phase transition (SOFT). Based on a phenomenological model, magnetocaloric properties of the LDCMO compound have been studied. Thanks to this model, we can predict the values of the magnetic entropy change ΔS, the full width at half-maximum δ T _FWHM, the relative cooling power (RCP), and the magnetic specific heat change ΔC _p for our compound. The significant results under 2 T indicate that our compound could be considered as a candidate for use in magnetic refrigeration at low temperatures. In order to further understand the FM-PM transition, the associated critical behavior has been investigated by magnetization isotherms. The critical exponents estimated by the modified Arrott plot, the Kouvel–Fisher plot, and the critical isotherm technique are very close to those corresponding to the 3D-Ising standard model (β = 0.312 ± 0.07, γ = 1.28 ± 0.02, and δ = 4.80).Those results revealed a long-range ferromagnetic interaction between spins.     

Synthesis and Magnetic Properties of Bi<Subscript>1.7</Subscript>Pb<Subscript>0.3</Subscript>Sr<Subscript>2</Subscript>Ca<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>10+<Emphasis Type="Italic">δ</Emphasis></Subscript> Added with Nano Y

Bi₁₇Pb_0.3Sr₂Ca₂Cu₃O_10+δ superconductor samples were synthesized by the conventional solid-state reaction method. To study the effects of the addition of yttrium nanoparticles to the superconducting system, nano Y₂O₃ was introduced by small weight percentages (0.2, 0.4, 0.6, 0.8, and 1.0 wt%) in the first step of the synthesis process. Phase identification and microstructural characterization of the samples were investigated using X-ray diffraction and scanning electronic microscopy (SEM). Energydispersive X-ray spectroscopy (EDX) analysis was utilized to confirm the presence of the desired elements in the chemical composition of the samples. Moreover, DC electrical resistivity as a function of the temperature, critical current density (J _c), AC magnetic susceptibility, and DC magnetization measurements were carried to evaluate the relative performance of samples. XRD analysis showed that both (Bi,Pb)-2223 and Bi-2212 phases coexist in the samples having an orthorhombic crystal structure. Both the onset critical temperatures (T _c) (onset) and zero electrical resistivity critical temperatures (T _c) (R = 0) of the samples were determined from the DC electrical resistivity measurements. An improvement of the superconducting transition temperature of 3.0 % was obtained with increasing Y₂O₃ nanoparticles to x = 1.0 wt%, while the critical current density is improved by 200 %. AC magnetic susceptibility measurement showed that the diamagnetic fraction and intergranular coupling of the x = 1.0 wt% sample are greater than those of the others. The variation of magnetization with temperature (M–T curve) of the samples was measured by cooling the sample in zero fields (ZFC) and an applied field of 10 Oe (FC). The results of AC magnetic susceptibility and DC magnetization measurements were in good agreement with DC electrical resistivity measurement.