The Effect of Inhomogeneous Phase on the Critical Temperature of Smart Meta-superconductor MgB<Subscript>2</Subscript>

The critical temperature (T_C) of MgB₂, one of the key factors limiting its application, is highly desired to be improved. On the basis of the meta-material structure, we prepared a smart meta-superconductor structure consisting of MgB₂ micro-particles and inhomogeneous phases by an ex situ process. The effect of inhomogeneous phase on the T_C of smart meta-superconductor MgB₂ was investigated. Results showed that the onset temperature (\(T_{\mathrm {C}}^{\text {on}}\)) of doping samples was lower than those of pure MgB₂. However, the offset temperature (\({T}_{\mathrm {C}}^{\text {off}}\)) of the sample doped with Y₂O₃:Eu³⁺ nanosheets with a thickness of 2 ～ 3 nm which is much less than the coherence length of MgB₂ is 1.2 K higher than that of pure MgB₂. The effect of the applied electric field on the T_C of the sample was also studied. Results indicated that with the increase of current, \({T}_{\mathrm {C}}^{\text {on}}\) is slightly increased in the samples doping with different inhomogeneous phases. With increasing current, the \({T}_{\mathrm {C}}^{\text {off}}\) of the samples doped with nonluminous inhomogeneous phases was decreased. However, the \({T}_{\mathrm {C}}^{\text {off}}\) of the luminescent inhomogeneous phase doping samples increased and then decreased with increasing current.     

Improving the Critical Temperature of MgB<Subscript>2</Subscript> Superconducting Metamaterials Induced by Electroluminescence

The MgB₂ superconductor was doped with electroluminescent Y₂O₃:Eu, to synthesise a superconducting metamaterial. The temperature dependence of the resistivity of the superconductor indicates that the critical temperature (T _C) of samples decreases when increasing the amount of doped Y ₂ O ₃ nanorods, due to impurity (Y ₂ O ₃, MgO and YB ₄). However, the T _C of the samples increase with increasing amount of doped Y ₂ O ₃:Eu ³⁺ nanorods, which are opposite to doped Y ₂ O ₃ nanorods. Moreover, the transition temperature of the sample doped with 8 wt % Y ₂ O ₃:Eu ³⁺nanorods is higher than those of doped and pure MgB ₂. The T _C of the sample doped with 8 wt % Y ₂ O ₃:Eu ³⁺ nanorods is 1.15 K higher than that of the sample doped with 8 wt % Y ₂ O ₃. The T _C of sample doped with 8 wt% Y ₂ O ₃:Eu ³⁺ is 0.4 K higher than that of pure MgB ₂. Results indicate that doping electroluminescent materials into MgB ₂ increases the transition temperature; this novel strategy may also be applicable to other superconductors.     

High-temperature heat capacity and vibrational spectra of Eu<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Eu₂Sn₂O₇ compound has been prepared by solid-state reaction (by sequentially firing a stoichiometric mixture of Eu₂O₃ and SnO₂ in air at 1273 and 1473 K) and its heat capacity has been determined by differential scanning calorimetry in the temperature range 370–1000 K. The heat capacity data have been used to evaluate the thermodynamic properties of europium stannate: enthalpy increment H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and reduced Gibbs energy Ф°(T). Raman spectra of Eu₂Sn₂O₇ polycrystals with the pyrochlore structure have been measured in the range 200–1200 cm^–1.     

Synthesis and High-Temperature Heat Capacity of Sm<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript> and Eu<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Sm₂Ge₂O₇ and Eu₂Ge₂O₇ germanates have been prepared by solid-state reactions via multistep firing of stoichiometric mixtures of Sm₂O₃ (Eu₂O₃) and GeO₂ in air at temperatures from 1273 to 1473 K. The molar heat capacity of the samarium and europium germanates has been determined by differential scanning calorimetry in the range 350–1000 K and the C _p (T) data have been used to evaluate their thermodynamic properties.     

Critical Behavior of La<Subscript>0.67</Subscript>Ba<Subscript>0.33</Subscript>Mn<Subscript>0.95</Subscript>Fe<Subscript>0.05</Subscript>O<Subscript>3</Subscript> Manganite

The critical behavior of perovskite manganite La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ at the ferromagnetic–paramagnetic has been analyzed. The results show that the sample exhibited the second-order magnetic phase transition. The estimated critical exponents derived from the magnetic data using various such as modified d’Arrott plot Kouvel–Fisher method and critical magnetization M(T _C, H). The critical exponents values for the La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ are close to those expected from the mean field model β = 0.504 ± 0.01 with T _C = 275661 ± 0.447 (from the temperature dependence of the spontaneous magnetization below T _C ), γ = 1.013 ± 0.017 with T _C = 276132 ± 0.452 (from the temperature dependence of the inverse initial susceptibility above T _C ), and δ = 3.0403 ± 0.0003. Moreover, the critical exponents also obey the single scaling equation of M(H, ε) = |ε| ^β f _±(H/|ε| ^β+γ ).     

Comparative Experimental and Density Functional Theory (<Emphasis Type="Italic">DFT</Emphasis>) Study of the Physical Properties of MgB<Subscript>2</Subscript> and AlB<Subscript>2</Subscript>

In the present study, we report an intercomparison of various physical and electronic properties of MgB₂ and AlB₂. In particular, the results of phase formation, resistivity ρ(T), thermoelectric power S(T), magnetization M(T), heat capacity (C _P ), and electronic band structure are reported. The original stretched hexagonal lattice with a=3.083 Å, and c=3.524 Å of MgB₂ shrinks in c-direction for AlB₂ with a=3.006 Å, and c=3.254 Å. The resistivity ρ(T), thermoelectric power S(T) and magnetization M(T) measurements exhibited superconductivity at 39 K for MgB₂. Superconductivity is not observed for AlB₂. Interestingly, the sign of S(T) is +ve for MgB₂ the same is ?ve for AlB₂. This is consistent with our band structure plots. We fitted the experimental specific heat of MgB₂ to Debye–Einstein model and estimated the value of Debye temperature (Θ _D) and Sommerfeld constant (γ) for electronic specific heat. Further, from γ, the electronic density of states (DOS) at Fermi level N(E _F) is calculated. From the ratio of experimental N(E _F) and the one being calculated from DFT, we obtained value of λ to be 1.84, thus placing MgB₂ in the strong coupling BCS category. The electronic specific heat of MgB₂ is also fitted below T _c using α-model and found that it is a two gap superconductor. The calculated values of two gaps are in good agreement with earlier reports. Our results clearly demonstrate that the superconductivity of MgB₂ is due to very large phonon contribution from its stretched lattice. The same two effects are obviously missing in AlB₂, and hence it is not superconducting. DFT calculations demonstrated that for MgB₂, the majority of states come from σ and π 2p states of boron on the other hand σ band at Fermi level for AlB₂ is absent. This leads to a weak electron phonon coupling and also to hole deficiency as π bands are known to be of electron type, and hence obviously the AlB₂ is not superconducting. The DFT calculations are consistent with the measured physical properties of the studied borides, i.e., MgB₂ and AlB₂.     

Synthesis and High-Temperature Heat Capacity of Dy<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript> and Ho<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Dy₂Ge₂O₇ and Ho₂Ge₂O₇ pyrogermanates have been prepared by solid-state reactions in several sequential firing steps in the temperature range 1237–1473 K using stoichiometric mixtures of Dy₂O₃ (or Ho₂O₃) and GeO₂. The heat capacity of the synthesized germanates has been determined as a function of temperature by differential scanning calorimetry in the range 350–1000 K. The experimentally determined C _p (T) curves of the dysprosium and holmium germanates have no anomalies and are well represented by the Maier–Kelley equation. The experimental C _p (T) data have been used to evaluate the thermodynamic functions of the Dy₂Ge₂O₇ and Ho₂Ge₂O₇ pyrogermanates: enthalpy increment H°(T)–H°(350 K), entropy change S°(T)–S°(350 K), and reduced Gibbs energy Ф°(T).     

Heat Capacity and thermodynamic functions of DyMe<Superscript>II</Superscript>Cr<Subscript>2</Subscript>O<Subscript>5.5</Subscript>(Me<Superscript>II</Superscript>-Mg,Ca) in the range from 298.15 to 673 K

The calorimetric method is used to investigate the heat capacity of DyMe^IICr₂O_5.5(Me^II-Mg, Ca) chromites in the range from 298.15 to 673 K. The C _p ⁰ ～ f(T) curves exhibit λ-like effects at 348 and 548 K for DyMgCr₂O_5.5 and at 473 K for DyCaCr₂O_5.5, which apparently relate to second-order phase transitions. The temperature dependences are calculated for thermodynamic functions C _p ⁰ (T), H ⁰(T)-H ⁰(298.15), S ⁰(T), and Φ**(T).     

Photoluminescence of Ga<Subscript>2</Subscript>S<Subscript>3</Subscript>:Eu nanocrystals

The photoluminescence (PL) of Ga₂S₃-5 mol % Eu₂O₃ nanocrystals prepared by mechanical comminution of the initial compound has been studied in the temperature range from 77 to 300 K. It is established that the PL spectrum of nanocrystals, in comparison to that of a massive sample, extends over a broader wavelength interval (430–620 nm) and has two maxima (at 507 and 556 nm) instead of one. The intensity of emission from nanocrystals is significantly higher than that from the massive crystal. The halfwidth in both cases varies with the temperature in proportion to T ^1/2. The intensity of emission at 556 nm for nanocrystals depends on the temperature as lgI ～ 1/T, this dependence having three linear portions corresponding to an activation energy of 0.04, 0.16, and 0.43 eV. The PL bands with maxima at 507 and 556 nm are assigned to the intracenter 4f ⁶5d4f ⁷ transitions in Eu²⁺ ions.     

Influence of coronene addition on some superconducting properties of bulk MgB<Subscript>2</Subscript>

This study reports the effect of coronene (C₂₄H₁₂) addition on some superconducting properties such as critical temperature (T_c), critical current density (J_c), flux pinning force density (F_p), irreversibility field (H_irr), upper critical magnetic field (H_c2), and activation energy (U₀), of bulk MgB₂ superconductor by means of magnetisation and magnetoresistivity measurements. Disk-shaped polycrystalline MgB₂ samples with varying C₂₄H₁₂ contents of 0, 2, 4, 6, 8, 10 wt%, were produced at 850 °C in Ar atmosphere. The obtained results show an increase in field-J_c values at 10 and 20 K resulting from the strengthened flux pinning, and a decrease in critical temperature (T_c) because of C substitution into MgB₂ lattice, with increasing amount of C₂₄H₁₂ powder. The H_c2(0) and H_irr(0) values are respectively found as 144, 181, 172 kOe, and 128, 161, 145 kOe for pure, 4 wt% and 10 wt% C₂₄H₁₂ added samples. The U₀ depending on the magnetic field curves were plotted using thermally activated flux flow model. The maximum U₀ values are respectively obtained as 0.20, 0.23 and 0.12 eV at 30 kOe for pure, 4 wt% and 10 wt% C₂₄H₁₂ added samples. As a result, the superconducting properties of bulk MgB₂ at high fields was improved using C₂₄H₁₂, active carbon source addition, because of the presence of uniformly dispersed C particles with nanometer order of magnitude, and acting as effective pinning centres in MgB₂ structure.     

Temperature effect on the photoluminescence intensity and Eu<Superscript>2+</Superscript> excited state lifetime in EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript> and EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript>:Er<Superscript>3+</Superscript>

The photoluminescence (PL) spectra and Eu²⁺ excited state lifetime of EuGa₂S₄ and EuGa₂S₄:Er³⁺ have been studied in the range 78–500 K. The spectra show a band at 545 nm, due to the 4f ⁶5d → 4f ⁷(⁸ S _7/2) transition. With increasing temperature, the full width at half maximum Γ(T) of the PL band of EuGa₂S₄ and EuGa₂S₄:Er³⁺ crystals increases from 0.15 to 0.22 and from 0.13 to 0.19 eV, respectively. Over the entire temperature range studied, Γ(T) is a linear function of T ^1/2. The 545-nm emission intensity and Eu²⁺ excited state lifetime in EuGa₂S₄ and EuGa₂S₄:Er³⁺ vary exponentially with temperature. The luminescence quenching energies evaluated from the Arrhenius plots of I(10³/T) and τ(10³/T) coincide (0.10 eV) within the error of determination.     

The calorimetry and thermodynamic functions of Nd Mg<Stack><Subscript>3</Subscript><Superscript>I</Superscript></Stack>Mn<Subscript>4</Subscript>O<Subscript>12</Subscript> (Me<Superscript>I</Superscript>-Li,Na, K) manganites in the range from 298.15 to 673 K

The ceramic technology is employed for synthesizing manganites of composition Nd Mg ₃ ^I Mg₃Mn₄O₁₂(Me^I-Li, Na, K). The X-ray technique is used to find that the compounds crystallize in tetragonal syngony. The parameters of their crystal lattices are determined. Their heat capacities are experimentally determined in the range from 298.15 to 673 K, which enables one to reveal second-order phase transitions. In view of these transitions, equations describing the C _p ^° ～ f(T) dependence are derived, and the thermodynamic functions C _p ^° (T), H°(T)-H°(298.15), S°(T), and Φ ^xx (T) are calculated.     

Synthesis and high-temperature heat capacity of Gd<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Gd₂Sn₂O₇ gadolinium stannate with the pyrochlore structure has been prepared by solid-state reaction and its high-temperature heat capacity has been determined by differential scanning calorimetry in the temperature range 350–1020 K. The C_p(T) data are shown to be well represented by the classic Maier–Kelley equation. The experimental C_p(T) data have been used to evaluate the thermodynamic functions of gadolinium stannate: enthalpy increment H°(T)–H°(339 K), entropy change S°(T)–S°(339 K), and reduced Gibbs energy Ф°(Т).     

Investigation of Magnetic,Magnetocaloric, and Critical Properties of La<Subscript>0.5</Subscript>Ba<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript> Manganite

We present an extensive study of the magnetic properties of a novel La_0.5Ba_0.5MnO₃ perovskite material prepared by the hydrothermal method. The explored sample was structurally studied by the x-ray diffraction (XRD) method which confirms the formation of a pure cubic phase of a perovskite structure with Pm3m space group. The magnetic properties were probed by employing temperature M (T) and external magnetic field M (μ_oH) dependence of magnetization measurements. A magnetic phase transition from ferromagnetic to paramagnetic phase occurs at 339 K in this sample. The maximum magnetic entropy change (\(\left | {{\Delta } S}_{M}^{\max } \right |\)) took a value of 1.4 J kg^??1 K^??1 at the applied magnetic field of 4.0 T for the explored sample and has also been found to occur at Curie temperature (T_C). This large entropy change might be instigated from the abrupt reduction of magnetization at T_C. The magnetocaloric effect (MCE) is maximum at T_C as represented by M (μ_oH) isotherms. The relative cooling power (RCP) is 243.2 J kg^??1 at μ_oH =?4.0 T. Moreover, the critical properties near T_C have been probed from magnetic data. The critical exponents δ, β, and γ with values 3.82, 0.42, and 1.2 are close to the values predicted by the 3D Ising model. Additionally, the authenticity of the critical exponents has been confirmed by the scaling equation of state and all data fall on two separate branches, one for T < T_C and the other for T > T_C, signifying that the critical exponents obtained in this work are accurate.     

High-temperature heat capacity and thermodynamic properties of Tb<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Tb₂Sn₂O₇ has been prepared by solid-state reaction in air at 1473 K over a period of 200 h and its isobaric heat capacity has been studied experimentally in the range 350–1073 K. The C _p(T) data for this compound have no extrema and are well represented by the classic Maier–Kelley equation. The experimental C _p(T) data have been used to evaluate the thermodynamic properties of terbium stannate (pyrochlore structure): enthalpy increment H°(T)–H°(350 K), entropy change S°(T)–S°(350 K), and reduced Gibbs energy Ф°(Т).     

Band Modification Effect on the Normal and Superconducting State Properties of Bulk MgB<Subscript>2</Subscript>

Modification of σ and π bands was studied in MgB₂ by doping 3, 6 and 9 wt% of C and Fe, respectively. The samples synthesized by a solid-state route were characterized by XRD, and magnetization (M) and resistivity (ρ) measurements were in the temperature range (T) 4.2–300 K and magnetic field range (B) 0–12 T, respectively. The decrease (increase) of the lattice parameter a with C (Fe) doping, consistent with B (Mg) site substitution, confirms the expected changes in σ (π) bands. This is supported by the fact that normal-state ρ(T) of all the samples can be fitted by a two-band model and the scattering rates in both the bands are found to be dependent on the dopant. The influence of C and Fe doping on various superconducting properties of the host MgB₂ is also found to be significantly different. For instance, in the presence of magnetic field, Fe doping shows a much larger broadening of the superconducting transition when compared to C doping. The critical current density (J _C(B)) at 4.2 K vanishes for C (Fe) doping at around T～12 (～3). It is shown that the band modification and the superconducting properties are correlated.     

Thermal Dissociation of RMnO<Subscript>3</Subscript> (R = Dy,Yb, Lu)

The phase equilibria involved in the thermal dissociation of RMnO₃ (R = Dy, Yb, Lu) were studied in the range 973–1173 K by a static method in a vacuum circulation unit and by x-ray diffraction analysis of quenched solid phases. The RMnO₃ manganites were shown to dissociate by the reaction RMnO₃ = 1/2R₂O₃ + MnO + 1/4O₂. The temperature dependences of the equilibrium oxygen pressure and Gibbs energy change in this reaction were determined for the three compounds. The experimental data were used to evaluate the standard thermodynamic functions of formation of RMnO₃ from R₂O₃ and Mn₂O₃: ΔH⁰(T) = ?88.93 kJ/mol, Δ S⁰(T) = 46.56 J/(mol K) for DyMnO₃; ΔH⁰(T) = ?130.95 kJ/mol, Δ S⁰(T) = 86.25 J/(mol K) for YbMnO₃; ΔH⁰(T) = ?142.94 kJ/mol, Δ S⁰(T) = 102.87 J/(mol K) for LuMnO₃.     

Rapid synthesis and enhancement in down conversion emission properties of BaAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>,RE<Superscript>3+</Superscript> (RE<Superscript>3+</Superscript>=Y,Pr) nanophosphors

BaAl₂O₄:Eu²⁺,RE³⁺ (RE³⁺=Y, Pr) down conversion nanophosphors were prepared at 600 °C by a rapid gel combustion technique in presence of air using boron as flux and urea as a fuel. A comparative study of the prepared materials was carried out with and without the addition of boric acid. The boric acid was playing the important role of flux and reducer simultaneously. The peaks available in the XPS spectra of BaAl₂O₄:Eu²⁺ at 1126.5 and 1154.8 eV was ascribed to Eu²⁺(3d _5/2) and Eu²⁺(3d _3/2) respectively which confirmed the presence of Eu²⁺ ion in the prepared lattice. Morphology of phosphors was characterized by tunneling electron microscopy. XRD patterns revealed a dominant phase characteristics of hexagonal BaAl₂O₄ compound and the presence of dopants having unrecognizable effects on basic crystal structure of BaAl₂O₄. The addition of boric acid showed a remarkable change in luminescence properties and crystal size of nanophosphors. The emission spectra of phosphors had a broad band with maximum at 490–495 nm due to electron transition from 4f ⁶5d ¹ → 4f ⁷ of Eu²⁺ ion. The codoping of the rare earth (RE³⁺=Y, Pr) ions help in the enhancement of their luminescent properties. The prepared phosphors had brilliant optoelectronic properties that can be properly used for solid state display device applications.     

Very high thermal stability with excellent dielectric,and non-ohmics properties of Mg-doped CaCu<Subscript>3</Subscript>Ti<Subscript>4.2</Subscript>O<Subscript>12</Subscript> ceramics

In this work, the nominal CaCu_3?xMg_xTi_4.2O₁₂ (0.00, 0.05 and 0.10) ceramics were prepared by sintering pellets of their precursor powders obtained by a polymer pyrolysis solution method at 1100 °C for different sintering time of 8 and 12 h. Very low loss tangent (tanδ)?<?0.009–0.014 and giant dielectric constant (ε′) ～?1.1?×?10⁴–1.8?×?10⁴ with excellent temperature coefficient (Δε′) less than ±?15% in a temperature range of ??60 to 210 °C were achieved. These excellent performances suggested a potent application of the ceramics for high temperature X8R and X9R capacitors. It was found that tanδ values decreased with increasing Mg²⁺ dopants due to the increase of grain boundary resistance (R_gb) caused by the very high density of grain, resulting from the substitution of small ionic radius Mg²⁺ dopants in the structure. In addition, CaCu_3?xMg_xTi_4.2O₁₂ ceramics displayed non-linear characteristics with the significant enhancements of a non-linear coefficient (α) and a breakdown field (E_b) due to Mg²⁺doping. The high values of ε′ (14012), α (13.64) and E_b (5977.02 V/cm) with very low tanδ value (0.009) were obtained in a CaCu_2.90Mg_0.10Ti_4.2O₁₂ ceramic sintered at 1100 °C for 8 h.     

New,thermally stable Gd<Subscript>11</Subscript>(GeO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>O<Subscript>10</Subscript>-based upconversion phosphors

A series of Gd_11–x–y Yb _x Er _y GeP₃O₂₆ germanate phosphates differing in the ratio of the Yb³⁺ and Er³⁺ active ions have been synthesized, and their luminescence spectra have been measured. According to X-ray diffraction characterization results, all of the synthesized germanate phosphates are single-phase and have a triclinic structure (sp. gr. P1). We have measured upconversion luminescence spectra due to the Er^{3+ 2}H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 radiative transitions in the synthesized gadolinium ytterbium erbium germanate phosphates and determined the luminescence upconversion energy yield (B _en) in Gd_11–x–y Yb _x Er _y GeP₃O₂₆. The effects of the concentrations and ratio of the dopants in the Gd₁₁(GeO₄)(PO₄)₃O₁₀ germanate phosphate host on B _en and the ratio of the luminescence intensities in the red and green spectral regions (R/G) have been assessed.