广义直觉模糊加权交叉影响平均算子及其在多属性决策中的应用

针对不同直觉模糊集的隶属度与非隶属度可能存在交叉影响, 提出广义直觉模糊加权交叉影响平均(GIFWIA) 算子, 推导出其数学表达式, 研究该算子的性质, 并探讨了基于GIFWIA 算子的多属性决策方法. 通过实例表明了所提出广义算子在决策应用中的有效性, 并分析了不同参数lambda 对决策的影响. 通过灵敏度和相关比较分析, 解释了交叉影响对决策结果的影响, 表明了所提出广义算子的稳定性.

     

基于包含度的直觉模糊粗糙集模型

将直觉模糊包含度引入粗糙集与直觉模糊集的融合建模。首先,介绍直觉模糊集在特殊格L上的定义;其次,将模糊包含度拓展到直觉模糊环境下,提出取值于特殊格L的直觉模糊包含度定义和计算公式;在此基础上,分别利用直觉模糊包含度的隶属度与非隶属度定义了上下近似算子,建立了直觉模糊相似关系下的直觉模糊粗糙集模型,并对近似算子的重要性质进行了证明。     

一种新的区间直觉模糊熵及其应用

提出了区间值直觉模糊集的区间直觉模糊交叉熵,这种交叉熵充分考虑了区间值直觉模糊集的隶属度,非隶属度以及犹豫度。给出一种区间值直觉模糊集的区间直觉模糊熵的公理化体系,并且基于直觉模糊交叉熵公式给出一种区间直觉模糊熵的具体测度公式。利用区间值直觉模糊集的加权相关系数,将提出的熵公式应用于解决属性权重完全未知的区间直觉模糊多属性决策问题。     

基于θ算子的变精度直觉模糊粗糙集*

在模糊近似空间中,结合直觉模糊集的隶属度、非隶属度与模糊蕴涵算子,提出基于θ算子和θ^算子的直觉模糊集及其隶属度和非隶属度的概念,并证明它们一系列性质.然后,结合直觉模糊集与变精度粗糙集,定义基于θ算子的变精度直觉模糊粗糙集,提出求解变精度粗糙集阈值参数β的方法,使用算例分析该方法.     

考虑未知属性权重的区间直觉模糊VIKOR方法

针对传统模糊集方法处理不确定性多属性决策问题时只考虑隶属度信息的缺点,提出了基于区间直觉模糊集的VIKOR决策方法。区间直觉模糊集用来处理区间语义评价信息。考虑属性权重未知的问题,基于区间直觉模糊数间的支持度确定属性权重,属性的支持度越高,则其权重越小。将区间直觉模糊交叉熵引入区间直觉模糊VIKOR方法用于计算区间直觉模糊数间的距离。最后以某手机设计方案评价为例,验证了所提方法的有效性。     

基于新的区间直觉模糊集相似性测度的模式识别

有关区间值直觉模糊数（集）的相似性研究较少,并且现有的方法在处理实际问题时效果较差。针对这个问题,提出了区间值直觉模糊数（集）相似性测度的新方法,包含了隶属度,非隶属度,犹豫度,以及后者对前两者的影响,将隶属度,非隶属度,犹豫度的相似度表示成三元组的形式,用TOPSIS的思想处理该三元组,得出一种新的有效的相似性度,证明其合理性。将其应用到模式识别实例中,验证其有效性。     

基于加权相似性测度的直觉模糊近似推理

在可信度传播的基础上,提出一种加权相似性测度的直觉模糊近似推理方法.运用实例分析现有典型方法的不足,针对带有可信度因子的直觉模糊近似推理的3种形式,综合研究了直觉模糊集隶属度、非隶属度和犹豫度对相似性测度的影响,给出一种考虑权重的相似性测度方法,并将其运用到直觉模糊近似推理中.通过实例以及与同类推理算法比较,结果表明了该推理算法的合理性和可行性.     

区间直觉模糊连续交叉熵及其多属性决策方法

在区间直觉模糊（IVIF）环境下,利用连续有序加权平均（COWA）算子定义了一种新的区间直觉模糊数间的交叉熵,即区间直觉模糊连续交叉熵。依据提出的区间直觉模糊连续交叉熵定义了直觉模糊数间的连续交叉熵距离。基于TOPSIS的思想得到备选方案与理想方案的加权距离,并且计算备选方案与理想方案的相对贴近度,依据相对贴近度选择最优方案。其中,针对属性权重信息不完全确定条件下的决策问题,提出了以区间直觉模糊连续交叉熵最大为准则的规划模型;针对属性权重信息完全未知的情况,根据交叉熵理论确定属性权重向量。实验结果验证了新的决策方法的可行性和有效性。     

基于直觉模糊的ISODATA算法

ISODATA算法能自动地进行类的分裂和合并,但这种硬分类算法没有充分考虑图像本身的特点和人类的视觉特性,其分类效果一般差于模糊聚类算法。而大多数模糊识别方法都需要设置类别数目,有其自身的缺点,而直觉模糊则弥补了传统模糊理论不足。结合直觉模糊和ISODATA优点,将与隶属度和非隶属度相关的判定函数作为分类度量,提出了一种基于直觉模糊的ISODATA算法,结合实际改进了隶属度函数,以区域为待分类样本以提高算法速度,将其应用到图像分割,经实验证明了算法的有效性。     

多值直觉模糊集定义

基于直觉模糊集的基本概念,考虑其隶属度与非隶属度两个因素的影响,定义了一种多值直觉模糊集,并给出了五种多值直觉模糊集的隶属度与非隶属度的综合评判准则,即算术平均法、几何平均法、去掉最大最小值算术平均法、隶属度中值法、非隶属度中值法,从而使直觉模糊得到了拓广和应用.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。